injection mold used for sale

Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308

Injection molding machine Krauss Maffei KM 800-4300 MX BJ 2006

Key data: 1100 kN, 254 g/PS, 45 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine: · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 254 cm3. · Screw diameter: 45 mm. · Maximum distance between plates: 800 mm. · Control: IQT44. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for use.

Key data: 1100 kN, 99 g/PS, 30 mm

Used Ferromatic K110D-S plastic injection moulding machine. New 2000. Technical specifications of the machine · Manufacturer: FERROMATIK MIALACRON. · Model: K110D-S. · New: 2000. · Clamping force: 1100 kN. · Injection volume: 99 cm3. · Screw diameter: 30 mm. · Maximum distance between plates: 620 mm. · Control: IQT33. · Machine weight: 5500 kg. Technical documentation. The machine is regularly serviced, fully functional and ready for operation.

Injection molding machine Krauss Maffei KM 650-4300 CX BJ 2010

Key data: 2000 kN, 562 g/PS, 55 mm

Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold

CLAMPING FORCE: 150TON PLATEN SIZES: 1295 X 990 DBTB: ROTARY TABLE 1520 MIN MOULD HEIGHT: 300 MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 700MM SCREW DIAMETER: 40MM INJECTION PRESSURE: 2678BAR STROKE VOLUME: 283CM3 SHOT WEIGHT (P/S): 257GR CONTROLS: UNILOG B6 MOTOR: 22KW HEATING CAPACITY: 12.1KW SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 1 HOT RUNNER: 8 ZONE INTERGRATED ADDITIONAL: HORIZONAL INJECTION VERTICAL CLAMP

ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...

Key data: 220 kN, 22 mm

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and addi ...

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on reques ...

Key data: 1000 , 173 , 40

Vertical JSW electrical injection molding machine Type JT 100 RAD 230 V In excellent condition Screw diameter : 45 mm Screw stroke : 145 mm Injection volume : 231 cm3 Weight injectable in PS : 219 gr Injection pressure. : 1840 bars Injection speed. : 160 mm/s Clamping with double toggle Clamping force : 1000 KN - 100 T Opening stroke max : 250 mm Mold height. : 250 - 350mm Diameter of the round table : 1310 mm Machine weight : 6 tons Dimensions : 2,64 x 1,52 x 3,79 m

4 x Demag injection moulding machines Demag 80 to BJ 2005 Demag 420 to BJ 2003 Demag 420 to BJ 2005 Demag 420 to BJ 2008

Key data: 5500 , 80

Presse à injecter ENGEL 550 T Type ES1800 Année : 1998 E parfait état de fonctionnement

Key data: 3000 , 702 , 60

Presse à injecter ENGEL 300 T Type : VICTORY 1800 / 300 POWER Année de fabrication : 2008 En bon état de fonctionnement Force de fermeture : 3000 KN / 300 T Diamètre vis : 60 mm Volume injectable : 763 cm3 Poids de l’injection en PS : 702 gr Pression d’injection : 1960 bars Vitesse d’injection : 284 cm3/s Course ouverture moule max : 900 mm Epaisseur min moule : 400 mm Dimensions des plateaux : 1100 x 1100 mm Nombre de litres d’huile : 870 L Dimensions : 7,2 x 2,0 x 2,50 m Poids machine : 20 000 kg

Presse à injecter ENGEL 180 T Type : VICTORY 500/180 POWER Force de fermeture : 1800 KN - 180 T Année : 2008 Diamètre de la vis : 45 mm Volume d'injection : 318 cm³ Pression d’injection : 2040 bars Épaisseur min/max moule : 300 750 mm Distance entre colonnes : 860 x 830 mm

Key data: 1500 , 220 , 40

Presse à injecter ENGEL 150 T type ES 500/150HL Année de fabrication : 2001 En bon état de fonctionnement Force de fermeture : 1500 KN / 150 T Diamètre vis : 40 mm Volume injectable : 251 cm3 Pression d’injection : 1300 bars Rapport L/D. : 20 Nombre de zones de chauffe : 4 Ouverture max des plateaux : 950 mm Course d’ouverture : 700 mm Course de l’ejection. : 150 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 820 x 750 mm Dimensions : 5,45 x 1,60 x 2,40 m Poids : 13 000 kg

Ref. no.: 18565 Manufacturer: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equip ...

Injection moulding machine Stork N-2500-1400 Injection unit: Spray pressure (max.) 2100 bar Spray volume (max.) 595 cc Injection weight hp (max.) 565 g Spraying speed (max) 299 cc/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the bars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between clamping p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control)  ...

Presse à injecter ARBURG 100 T type 420C 1000-250 Année de fabrication : 1999 En bon état de fonctionnement Pompe neuve Force de fermeture : 1000 KN / 100 T Diamètre vis : 40 mm Volume injectable : 188 cm3 Pression d’injection : 1530 bars Rapport L/D : 18 Ouverture max des plateaux : 750 mm Epaisseur min moule : 250 mm Dimensions des plateaux : 570 x 570 mm Entre colonnes : 420 x 420 mm Dimensions : 4,15 x 1,60 x 2,02 m

B&A REF:  9213 TON: 60 SCREW DIAMETER:  25MM SHOT WEIGHT: 45 STROKE VOLUME:  49CM3 INJECTION PRESSURE:  2240AR PLATEN SIZES:  446 x 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT:  200MM MOULD OPENING STROKE:  350MM MAX DAYLIGHT:  550MM EJECTOR STROKE:  125MM CONTROLS: SELOGICA CORE PULLING: 1 MOTOR: 15 HEATING CAPACITY: 8.9KW SCREW DRIVE:   HYDRAULIC

Brand Ferromatik Milacron GmbH Type eQ-280 - 2290 Bj Ud Dvsw Ebpweycjlp Year of manufacturing 2023 Machine hours 50 hours Clamping Force 2.800 kN Screw ø 60 Mm Injection Pressure 2.238 bar Shotvolume max. 905 cm3 Max. distance between holms 710 x 660 mm Min. mould height 250 mm Distance between plates max. 1.400 mm Dimensions (LxWxH) 8.500 x 2.100 x 2.500 mm Weight 18.400 kG

Clamping Force: 300 ton // Shot Weight (Max): 476 g

Clamping Force: 200 ton

Clamping Force: 350 ton // Shot Weight (Max): 694 g

Clamping Force: 420 ton // Shot Weight (Max): 1555 g

Clamping Force: 1000 ton // Shot Weight (Max): 6995 g

Clamping Force: 220 ton // Shot Weight (Max): 625 g

Key data: 4 kN, 70 mm

Injection Molding Machine Injection Molding Machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of Make: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Driving Force Moving Plate: open: 105 kN close: 95 kN Clamping plate (h x v): 1,060 x 1,095 mm Clear width (h x v): 710 x 710 mm Tool opening travel: 920 mm Tool installation height min.: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Cylinder heating control zones: 6 Dry run rate: 1,550 1/h Oil filling: 720 ltr. Dimensions and weights: Net weight with control cabinet: approx. 16.0 to L/W/H: 6,510 x 2,040 x 2,380 mm Tool weight max.: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Spray pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g I ...

Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...

rand: Dr.Boy Model: 60E Year of construction: 2023 Working hours: 50 Screw diameter: 32 mm Injection pressure max.: 2.142 bar Shotvolume max.: 100,5 cm3 Clamping force: 60 T Max. distance between holms: 360 x 335 mm Min. mould height: 250 mm Distance between plates max. 650 mm Measurements: 3.450 x 1.150 x 1.950 mm Weight: 2.250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + Licence fee) • 4 Free programmable AIO’s • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed & moving platen – Water distributor 8-fold – Ejector with quick coupling – Open nozzle with thread tip • Energy distribution box 6-fold (feeding via second cable)  ...

Plastic injection molding machine SUMITOMO DEMAG C75 – Year 2008 Sumitomo Demag C75 model, year 2008.

Manufacturer: Fu Chun Shin Machinery Model: SD 60004M Year of Manufacture: 2009/ 2015/2016 Type of Machine : Injection Molding Machine Heater Capacity: 46.68 kW Motor Power: 44 kW Pump Pressure:140 kg/cm² Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement.

Offered is a Boy 80E 2K injection molding machine (year 2016, approx. 29398 operating hours) including 2C XS aggregate, Wittmann Primus 16 handling (year 2022), Dorner GAL-60 conveyor. 800kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw, completely enclosed, hydraulic ejector 42.7kN, EUROMAP 67 interface, robot stroke X/Y/Z: 2000mm/1200mm/620mm, conveyor 400mm width, 2m length. Viewing is possible by arrangement.

Key data: 1100 kN, 25 mm

warehouse no.: 503665 manufacturer: Wittmann Battenfeld type: EcoPower 110-350 controller: UNILOG B6P year of construction: 2014 operation hours: 56851 h clamping force: 1100 kN distance between tie-bars h x v: 470 x 420 mm size of mould plates h x v: 680 x 663 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 830 mm opening stroke: 380 mm screw diameter: 25 mm swept volume: 86 ccm injection pressure: 3000 bar equipment included screen text german Screentext Multi-Language CEE-socket 16A machine incl. water flow regulator Anti vibration mounts measures of machine l x w x h: 4.57m x 1.5m x 2.13m total weight: 4800KG

Manufacturer: Krauss Maffei Model: 80-390-C2 Year of Manufacture: 2001 Type of Machine : Hydraulic Injection Molding Machine Tonnage (Clamping Force): 80 t Tie Bar Distance (H x V): 405 x 405 mm Platen Size: 610 x 610 mm Ejector Hole: Centre Knee Lever: No Minimum Mold Height: 250 mm Maximum Mold Height: Not applicable Opening Stroke: 750 mm Screw Diameter: 35 mm Shot Weight: 140 g Core Functions: 2 Handling System: No Electrical Data Operating Voltage: 400 V, 3-phase Frequency: 50 Hz Total Current (Iges): not specified Motor Current (In Motor): 97 A Heating Current (In Heating): 117 A Single Motor Current: 37 A Fuse Protection: - Motor: 100 A - Heating: 125 A Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 3500 kN, 70 mm

DEMAG Ergotech 350/710-2300 Concept • Clamping Force: ~3,500 kN (≈350 ton) • Injection Unit: • Screw Diameter: typically 70 mm • Injection Volume: ~1,212 cm³ • Injection Pressure: up to ~1,877 bar • Tie Bar Spacing: ~710 × 630 mm • Plate Dimensions: ~710 mm plate width • Opening Stroke: ~675 mm

Key data: 1280 kN

Clamping force: 128 t. Tie-bar spacing: 410 × 410 mm. Machine no. 13A350 Platen size: 650 × 652 mm. Mold height (min–max): 140–440 mm. Opening stroke: 360 mm. Ejector stroke: 95 mm. Ejector force: 4 t. Screw diameter: 42 / 47 / 53 mm. L/D ratio: 21.9 / 19.6 / 17.4 Diam. 42: 216 g. Diam.47: 271 g. Diam.53: 344 g. Injection volume: 235 / 295 / 375 cm3. Injection pressure: 2005 / 1600 / 1260 kg/cm2. Injection stroke: 170 mm. Screw rotation speed: 0–200 rpm. Machine dimensions (L × W × H): 5.0 × 1.2 × 1.88 m Machine weight: 4500 kg.

Key data: 1800 kN

Clamping force: 180 t; 4-column toggle system; tie-bar spacing: 480×480 mm; platen size: 720×720 mm; mold height: 150–550 mm; opening stroke: 396 mm; ejector stroke: 130 mm; screw diameter: 60 mm (to be confirmed); injection volume: 678 cm³; 4 heating zones; power supply: 3×380 V–50 Hz; installed power: 45.3 kW; machine dimensions: 5950×1400×1920 mm; weight: 6700 kg; Machine No.: ED1020.

Key data: 800 kN

Clamping force: 80 t. Clamping type: Toggle system. Tie-bar spacing: 270 × 310 mm. Platen size: 310 × 310 mm. Mold height: 150–270 mm. Opening stroke (approx.): 310 mm. Ejector stroke: 70 mm. Screw diameter: 26 mm (to be confirmed), Injection volume: 124 cm³. Injection weight (PS): 60–103 g. L/D ratio: 19–22:1. Approx. machine dimensions: 3500 × 1200 × 1600 mm. Weight: 3000–4000 kg. Machine No.: 200000800292.

Clamping force 135 t, toggle clamping system with 4 tie bars, tie-bar spacing 400 × 400 mm, mold height 150–500 mm, opening stroke 400 mm, ejector stroke 150 mm, screw diameters 45/50/55 mm, injection volume 286–427 cm³, injection pressure 1210–1800 bar, 4 heating zones, installed power 31 kW, overall dimensions approx. 4,900 × 1,200 × 2,050 mm, weight approx. 5,000–5,700 kg. Machine No. 959.

A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible.

Spritzgießmaschine HUARONG HRN-400 wurde 2008 in Taiwan von HUARONG PLASTIC MACHINERY CO., LTD. gebaut. Die Maschine wird für die wirtschaftliche Produktion von Kunststoffteilen in verschiedenen Farben, Formen und Größen eingesetzt. Diese Teile werden im Spritzgussverfahren hergestellt, bei dem plastifizierter Kunststoff in eine Form eingefüllt und dann mit hoher Presskraft gepresst wird. Um die höchste Produktivität und Wiederholbarkeit der hergestellten Teile zu erreichen, verfügt die Maschine über eine Reihe zuverlässiger Lösungen. Dazu gehören unter anderem ein Präzisions-Formenspannsystem, das mit einer Kraft von 400 Tonnen arbeitet, und ein Potentiometer, das die Position der Formen genau erfasst. Die Verformung der Aufspannplatten hingegen wird durch speziell entwickelte Säulen minimiert. Ein Zentralschmiersystem schmiert kontinuierlich alle beweglichen Teile der  ...

An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.

2 Babyplast-machines for sale. Injection capacity 9 cm3. One is year 2009, one is year 2011

Screw diameter: 120 mm Injectable volume / Shot volume: 5598 cm3 Injection pressure : 1137 bar Column passage / Bettween tie bar: 1060 x 1060 mm Mould thickness mini-maxi / Mould tickness mini-max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 Hydraulic Cores / 4 Corepulling

Screw diameter: 70 mm Injectable volume Shot volume: 5598 cm3 Injection pressure : 1137 bar Column pass-through: 1060 x 1060 mm Moulded thickness / Mold tickness mini -max: 350 - 1100 mm Opening stroke: 1150 mm Euromap 12 4 hydraulic cores - 4 cOREPULLING

Screw diameter: 45 mm Injectable volume / Shot volume: 358 cm3 Injection Pressure: 2426 bar Column passage / Bettween tie bar: 720 x 720 mm Thickness of the mould mini /Mold tickness -max: 320 - 725 mm Opening stroke: 730 mm Euromap 12 4 hydraulic cores - 4 corepulling

Key data: 1000 , 35

BILLION HERCULE 100 T Reference: H260/100 Condition: Very good Technical Specifications: Clamping force: 100 T / 1000 KN Tie bar spacing: 445 x 445 mm Platen dimensions: 630 x 630 mm Mold thickness (Min/Max): 180- 400 mm Opening stroke: 380 mm Injection volume: 139 cm³ Injection pressure: 1843 bar Screw diameter: 35 mm L/D ratio: 20 Dimensions & Weight: Weight: 5 100 kg

Key data: 500 , 24 , 18

Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg