injection battenfeld used for sale

Screw diameter; 55mm Injectable volume: 427 cm3 Injection pressure: 1720 bar Passage between columns: 570 x 570 mm Minimum mould thickness: 250 mm max: 750 mm Opening stroke: 600 mm Cores: 2 Robot interface: NO Options: Electrical dosing motor

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...

Key data: 2000 , 678 , 60

Screw diameter; 60 mm Injectable volume / Shot volume: 678 cm3 Injection pressure: 2000 bar Column Passage /Bettween tie bar: 570 x 570 mm Mould tickness thickness: 250 mm max: 550 mm Opening stroke: 450 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options: 12 Zones chauffe - 12 heating way

Key data: 3500 , 1212 , 70

Screw diameter; 70 mm Injectable volume / Shot volume: 1212 cm3 Injection pressure: 1877 bar Column passage / Bettween tie bar: 810 x 710 mm Mould tickness thickness: 380 mm max: 820 mm Opening stroke: 710 mm Core Pulling: 2 Robot interface: yes / Yes E67 Options:

clamping force: 350 kN injection volume: 58,5 cm³ screw diameter: 28 mm platen size: 260 x 254 mm Condition: used, Specification: injection moulding machine for TPE - used clamping unit: - clamping unit: vertical - clamping force: 350 kN - opening stroke max.: 300 mm - platen distance max.: 500 mm - Mould installation height min.: 200 mm - Clear width between tie bars: 260 x 254 mm - Ejector stroke max.: 80 mm - Clamping unit: VV - Lift of protective bonnet: 500 mm Injection unit: - Screw diameter: 28 mm - Screw L/D ratio: 18.6 - Screw stroke max.: 95 mm - Injection volume max.: 58.5 cm³ - Injection pressure: 1577 bar - Plasticising flow: 8.6 g/s - Injection flow: 85.5 g/s - Connected load: 3x 400 V, 50 Hz - Max. heating power: 5.8 kW - Drive power: 7,4 kW - Total power: 13,2 kW - Hydraulics: 210 bar (tank 65 litr ...

Ref. no.: 18142 Manufacturer: DEMAG Year of construction: 1997 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Distance between tie bars: 355 x 355 mm Mould height min.: 210 mm Platen size (h x v): 540 x 540 mm Injection unit Screw diameter: 35 mm Injection volume: 106 cm³ Shot weight: 95 g Injection pressure: 2573 bar Measurements and weight Dimensions: 3,65 x 1,15 x 1,18 m Machine weight: 3600-2500 kg

clamping force: 4.000 kN injection volume: 2.700 cm³ screw diameter: -- mm platen size: -- mm Condition: used, Specification: Rubber Injection Molding Machine - second-hand clamping unit: - Clamping force: 4000 kN - ejection device: 2-layer - Brush system: 2-layer Injection unit: - Injection volume max.: 2,700 cm³ Two identical systems are available. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

Pneumatic Injection Unit Kremlin A25 P air: 6 bar P prod. 6 bar Dimensions:45 x 160 x 45 mm

2013 SAR/SEPRO SR 5X-35HL S5 TRANS Injection robot Machine where functional before conservation, obsolete robot version, retrofit could not be done. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - .ucymachines/ Contact us at - sales@ucymachines

2016 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - .ucymachines/ Contact us at - sales@ucymachines

2008 SAR/KUKA R/SCHS/GR/ETI/UST/MED/FB/HBG/BAS Injection robot Machine was functional before conservation, obsolete robot version, retrofit could not be done. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 450 mm, 63 , 25

Screw diameter: 25 mm Displacement: 69 cm³ Injection weight in polystyrene: 63 g/hp Injection pressure: 2,400 bar Clamping force: 45 t tie-barless Tool installation height min.: 175 mm Opening distance: 355 mm CONTROL: CC200 Screen text: german / german Instruction manual: german / german Sprue picker er/usp Pump drive power: 11 kW Total connected load: 17.8 kW Total weight: 3,300 kg Dimensions L x W x H: 3.3 x 1.2 x 2.0 m m m Payment terms: 100% before taking over the machine, net only

Key data: 700 kN, 132 g/PS, 35 mm

Injection moulding machine Arburg 370S-700-290 Item number: 232 Availability: In stock Year of Make: 2008 Brand: Arburg Specifications Injection weight: 132 g Clamping force: 700 kN Screw diameter: 35 mm Spray pressure: 2000 bar Tiebar spacing: 370x370 mm Clamping plate size: 510x510 mm Tool installation height min.: 200 mm Plate spacing max: 600 mm Control: Selogica Language: German Power: 23.9 kW Hours: 67848 h Weight: 3300 kg Dimensions: 3.8x1.5 m Funnel: No Euromap: Yes Air Valve: Yes

Sell some machines from our warehouse

1) Vertical Rubber Molding Machine Manufacturer: Rutil Model: 2000/250 RS SX-F Stations: 1 Clamping Force: 500 Ton Heating Platens Dimensions: 520x650 mm Max Shot Volume: 2000 cc Max Daylight: 450 mm Minimal Mould Height: 100 mm 2) Vertical Rubber Molding Machine / NEEDS REPAIR - Manufacturer: Rutil - Model: MP3 700/150 - Stations: 3 - Clamping Force: 150 Ton - Heating Platens Dimensions: 420x500 mm - Max Shot Volume: 700 cc - Max Daylight: 400 mm - Minimal Mould Height: 140 mm 3) Vertical Rubber Molding Machine NEEDS REPAIR - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x500 mm - Max Shot Volume: 680 cc - Max Daylight: 400 mm - Minimal Mould Height: 70 mm 4) Vertical Rubber Molding Machine - Manufacturer: Rutil - Model: 680/150 RS - Stations: 1 - Clamping Force: 150 Ton - Heating Platens Dimensions: 430x50 ...

Key data: 805 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 80M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and ...

Key data: 2000 kN, 240 g/PS, 45 mm

Arburg 520 C - Allrounder 2000-675 -Injection molding machine - Control: Selogica - Handlebar spacing: 520 x 520 mm - Handlebar extension: 100 mm - Tool installation height: 350 mm - Opening travel: 650 mm - Centering: 125 mm - Core pull: 2 - Screw diameter: 45 mm - Shot weight - HP : 240g - Clamping force: 2000 KN - Operating hours pump: 61908 - Automatic operating hours: 55566 - Working position: Standard

B&A REF: 9108 TON: 430 SCREW DIAMETER: 80MM SHOT WEIGHT: 1645 STROKE VOLUME: 1810CM3 INJECTION PRESSURE: 1615AR PLATEN SIZES: 1060 X 1135MM DBTB: 680 X 760MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 730MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 250MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 4 MOTOR: 45 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Key data: 5000 kN, 80 mm

KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2

Manufacturer: Ferromatik Model: K-TEC350S Year of Manufacture: 2000 Operating hours: 59,477 Clamping Force: 3500 kN Injection Pressure: 1575 bar Stroke Volume: 1040 cm³ International Dimension: 3500II-1636 Power Supply: 400 V, 50 Hz Motor Power: 45 kW Heating Power: 22.7 kW Approx. Weight: 21.7 t Find more here - .ucymachines/ Contact us at - sales@ucymachines

DEMAG ERGOTECH VIVA 800-400 injection moulding machine was built in 2001 in Germany by Demag Kunstofftechnik (currently Sumitomo (SHI) Demag Plastics Machinery GmbH). This highly efficient machine is used for the economic production of plastic parts of different colours, shapes and sizes. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, ensure high repeatability of the manufactured products. The DEMAG injection moulding machine weighs 3750 kg. Technical specifications of the DEMAG ERGOTECH VIVA 800-400 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 35 mm - maximum injection weight PS: 157  ...

Inv. Num. : 8355 Type: TRX 100V Producer: TEDERIC Created: 2008 Parameters: Clamping force: 100 t Injection capacity: 228 cc Injection mass: 208 g Height of the clamping plate: 550 mm Width of the clamping plate: 540 mm Distance between uprights (horizontal): 360 mm Distance between uprights (vertical): 360 mm Ejector stroke length: 100 mm Spindle power: 11 kW Machine length: 4100 mm Machine width: 1100 mm Machine height: 1800 mm Injection weight: 3500 kg

Maplan 250ton Injection Machine Injection MTF 1500/250 Platen size = 630mm x500mm Stripper plate/ejectors =top only Max gap between platens = 702mm Volume = 1500 ccm3 Tonnage = 250T Year 2007

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...

Maplan 160ton Injection Machine Injection MTF 750/160 Platen size = 510mm x 450mm Stripper plate/ejectors =top only Max gap between platens = 575mm Volume = 750 ccm3 Tonnage = 160T Year 2002

Key data: 5000 kN

Offer(4x): Engel Duo 1800/500 BJ./YEAR 2016 38500h

Manufacturer: ARBURG Model: ALLROUNDER 680 Year of Manufacture: 2016 Type of Machine: Injection Moulding Machine Electrical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: 230 V ~ / 24 V = - Motor/Heating Rated Current: 76 A / 18 A - Total Rated Current: 94 A - Total Connected Load: 56 kW Machine has already been dismantled Operating hours: à approx. 29,000 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m

Key data: 3500 , 70

SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg

Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot There is an issue with the monitor. Monitor board needs replacement. Find more here - .ucymachines/ Contact us at - sales@ucymachines

A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.

Description SANDRETTO Micro 40T E injection molding machine SANDRETTO micro 40T E247 Clamping force : 40 T Version 2 GEFRAN Euromap 12 robot interface 4-way water box Socket table 1 core pull 4 heating zone

Key data: 1000 kN, 172 g/PS, 40 mm

Arburg 420C-1000-290 Injection Moulding Machine with sorting flap Number: 239 Availability: in stock Year of production: 2006 Producer: Arburg Screw diameter[mm]:40 Injection weight [g]: 172 Injection pressure [bar]: 1530 Clamping force [kN]: 1000 Gap spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. Form Height [mm]: 250 Control Type: Selogica Tongue: German Installed power [kW]: 21.4 Working hours [h]: 95822 Weight [kg]: 3700 Dimensions [mm]: 4400 × 2000 Feed hopper: NO Robot Nest: Yes Core String: Yes

Key data: 600 kN, 132 g/PS, 35 mm

Arburg 320C-600-250 Injection Moulding Machine Number: 238 Availability: in stock Year of production: 2008 Producer: Arburg Screw diameter[mm]:35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. Form Height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 76550 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Nest: Yes Core String: 1x

Key data: 2500 , 60

ENGEL 250T injection molding machine Reference : ES1800/250HL Clamping force : 250T Year : 1999 Working hours : 73 655 h Screw diameter : 60 mm Injectable volume : 763 cm3 Injection pressure : 1969 bars Platen dimensions : 1150 x 900 mm Mold thickness (min/max) : 350 mm x 850 mm Dimensions : 6,92 m x 2,08 m x 2,14 m + with 1 SEPRO robot

Inv. Num. : 8511 Type: J100ADS-180U 45 Producer: JSW Created: 2023 Parameters: Total number of injections: 6800 Operating hours: 60 h Panel dimensions: 630 x 630 mm Clamping force: 1000 kN Screw diameter: 45 mm Injection capacity: 223 cc Injection mass: 203 g Maximum distance between mounting plates: 910 mm Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 460 mm Maximum spray pressure: 157 MPa Opening of the mold: 360 mm Max. speed: 400 mm Machine length: 4950 mm Machine width: 1230 mm Machine height: 1670 mm Injection weight: 4600 kg Equipment: Manual Spares 1x SHINI SAL-3U-CE Suction Device 1x SHINI Vacuum Aspirator Molecular Dryer SSD120U-80H SHINI STM-607-W-CE Temperature Controller SHINI SIC-7.5A-R2 Cooling Unit Double dosing of SHINI SCM dye

SANDRETTO series 9 860/2200 Clamping force: 220 T - 2200 KN Distance between tie bar : 510 X 510 mm Platen dimension: 770 X 770 mm Min / max mold thickness: 210 - 630 mm Opening stroke: 550 mm Injectable volume: 475 cm3 Injection pressure: 1815 bars Screw diameter: 50 mm New screw / sheath injection assembly Total machine power: 43.1 KW L/D ratio: 20 Euromap 12 robot interface (Dal maschio Ginko from 2004 possible option) 2 aux cores (PM and PF) Top dosage

Manufacturer: ARBURG Year of Manufacture: 2023 Condition : New Model: ALLROUNDER 920 S 5000 Configuration: 1300 / 1300 L (Multi-component L-type) Clamping Force: 5,000 kN Injection Units: - IU 1: EUROMAP 1300 - IU 2: EUROMAP 800 It was test-run only twice during commissioning and has not been in production since. Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 3000 kN, 900 g/PS, 60 mm

Injection molding machine Krauss Maffei Km 300 1400 C1 BJ 1998

Manufacturer: ARBURG Model: ALLROUNDER 720 S 3200 - 290 / 290 Year of Manufacture: 2023 Condition : New Specifications: - Distance Between Tie Bars: 720 mm - Clamping Force: 3200 kN (max.) - Injection Unit 1 (by EUROMAP): 290 - Injection Unit 2 (by EUROMAP): 290 Does not include the robots mounted on the machine Find more here - .ucymachines/ Contact us at - sales@ucymachines

Injection moulding machine Krauss Maffei KM 125-390 C2 BJ 2004

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Demag Ergotech EXTRA 50-200 BJ2005 for sale/scrapping, but the control is already missing here.Enclosed you will find the photos and technical data of the machine for sale with BJ 2005. The machine currently has a plasticizing unit with 25mm screw (BJ 2014) installed, we sell the original plasticizing unit with 30mm screw that is still working for the machine. The machine worked until it was taken out of service, we installed the control system on another machine.

Injection moulding machine Arburg 470s 1100/290 YOC 2017 2 K

2 x Injection moulding machines Demag 1000 420 310 El Exis S Bj 2003