136,414 used machines on RESALE, but how to find them? Machine Search
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg
Key data: 520 mm, 520 mm
Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Key data: 318 t, 318
Parotec Face Plate Pallet PowerGrip 160 Stitch Partool Zero Point Clamping System Face plate custom-made by a sister company von Schunk. Such a face plate for the Parotec is not available for sale. Very good used condition. Various milling on the top, see pictures the dimensions can be found in the pictures. Weight approx. 50kg. There are other Parotec accessories in stock Other used interchangeable plates, a steel groove plate, You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Key data: 318 t, 318
Parotec Slot Plate Pallet Power Grip 160 Stitch Partool Zero Point Clamping System Very good used condition. the dimensions can be found in the pictures. Weight approx. 30kg. There are other Parotec accessories in stock More used interchangeable plates, one face plate D.52cm You will receive an invoice in paper form. For this item, VAT (19 percent) is shown on the invoice.
Two (2) Surplus/Never used, Mobile Substations 25/30 MVA, 115/13.8 kV. 60 Hz. 3 Phase, with ODTF1/ODAF2 cooling, YNd1 Connection, Cooper Windings, on a low bed chassis trailer, HV Surge arrester, High Capacitive Voltage transformer, 145 kV Hybrid Switchgear, Outdoor Circuit Breaker Roof Bushing, Control and Protection Panel, Battery Charger, Batteries and all the auxiliary equipment for this substation.
Cordless riveting tool, blind rivet gun, blind rivets -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg
Manufacturer: SHW Type of Machine: PowerSpeed 5 Condition: used 5x axis 5k hours was used for Aluminum and stainless steel 48 place tool changer 8 meter travel table Find more here - .ucymachines/ Contact us at - sales@ucymachines
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 7/2019 At call! Siemens 840D-SL Shopturn Main spindle BigBore spindle passage 76mm KK8 - 4,000 1/min Sub-spindle KK6 - 5,000 1/min 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! WB mechanics GmbH is a precision mechanics workshop that markets its ...
CNC turning-milling center Emco Hyperturn 65 Powermill SMYB Commissioning 10/2017 At call! Siemens 840D-SL Shopturn Main Spindle SuperBigBore Spindle Passage 95mm KK8 - 3,500 1/min Sub-spindle KK6 - 5,000 1/min Milling spindle HSK-T63 12,000 1/min / new milling spindle 2024 40-speed chain magazine HSK-T63 Turret bottom VDI30 / Sauter Electronic handwheel Emco Tool Breakage and Wear Gear milling Shopturn Expansion Pack 5-axis simultaneous machining Energy management for Sinumerik OPC UA / Siemens interface 3D machine model Emco Standard Bar Feeder Interface Machine Status Lamp LED Multiflow Cleaning Gun Oil Mist Separator Belt filter system with IKZ Main Spindle Clamping Hook Hainbuch Clamping Top Mini Combi Ax Hoist Sub-spindle Schunk 185mm THW-plus with hard jaws The options list is complete! No interest in dealer enquiries! No separate dealer price! ...
Manufacturer: Homag, Type: Power FL 14/10/12/CF, Year: 2004, Control: yes, Number of milling spindles: 4, Required space L x W x H mm: 8400x4750, Year :2004
Manufacturer: Siemens, Type: SITOP power 20, Serial number: 6EP1 436-2BA00, Power Input: 50/60Hz, Power Output: 22,8-26,4V,
KIMLA POWERCUT LF 1530 6 kW fiber laser for tubes and sheet metal was built in 2021 in Poland. The reliable machine built on a rigid monolithic body equipped with state-of-the-art fibre technology guarantees the achievement of very smooth and even edges along the entire length of the workpiece, regardless of the machined material. The sheets are cut with a high-quality 6 kW fibre optic beam on a steel work table with integrated automatic pallet changing system, which allows uninterrupted machining by simultaneous loading and unloading of the workpieces during the cutting process. All cutting parameters are programmed in the intelligent PC-CAM CNC controller, which allows for very fast and dynamic operation with excellent accuracy. The KIMLA fibre laser cutting machine is also equipped with an integrated cutting system, extending the machine’s machining capabilities to include the cu ...
Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Prima Power Model: Combo Type of Machine : Laser cutting machine Twin-tower automated sheet metal warehouse by PrimaPower - specyfikation: - Combo 1530/2 H6.3, twin-tower warehouse, height 5,970 mm - Year of manufacture 2014 - Control panel - IOW station on the Y axis with rear bumpers for material positioning on block no. 2 - Barrier system and service door for the IOW station - Double wagon on the Y axis for connecting the LD machine to the SG on block no. 1 - 38 cassettes with a load capacity of 3 tons each, sheet stack height up to 100 mm - Maximum stored material dimensions 3000 x 1500 mm. Sheet stack up to 100 mm - The warehouse is loaded with full pallets (without a wooden support) using a forklift and a forklift, or with single sheets - Two trolleys on the outfeed side deliver material to connected devices. The trolley with a further outfeed runs ...
pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - ...
pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 9.5 mm/sec return speed: 155 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 6850 kg range L-W-H: 3750 x 1950 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.8 ...
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 135 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 9450 kg range L-W-H: 4250 x 2150 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen 2D graphical programming 15 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = ...
pressure: 60.0 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 5640 kg range L-W-H: 3250 x 1960 x 2750 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 13800 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...
The power encoder cable for Tetra Pak systems plays a vital role in the operation and monitoring of various equipment within the Tetra Pak machinery, particularly in processes like filling and packing. Here are some key features and details regarding power encoder cables used in Tetra Pak systems:, Key Features of Power Encoder Cables:, - Function: The power encoder cable connects the encoder to the control system, allowing for the transmission of signals that monitor the position and speed of moving parts in the machinery., - Signal Transmission: These cables are designed to carry data signals related to rotational positioning, helping ensure that machines operate accurately and efficiently., - Durability: Power encoder cables are built to endure the rigorous conditions within Tetra Pak machinery, including exposure to moisture, variable temperatures, and physical wear. They are often m ...
Key data: 4 Meter, 13 t
Machine Type: Plasma Inverter Cutting Machine Make Hypertherm Type Powermax 30 AIR Serial No. 033.100 Connection voltage 1 x 230 Volt Adjustment range 15 – 30 amps Duty cycle 20% ED at 30 amps Current adjustment infinitely variable max. cut-off cut for a short time 15 mm at 125 mm/min max. quality cut for a short time 7 mm at 500 mm/min Cooling inverter through built-in fan Cooling burner compressed air cooled Portable assembly system design Fuse 16 Ampere Optional accessories integrated compressor Dimensions L x W x H 420 x 195 x 330 mm Weight with burner 13 kg Age 4 years Condition workshop tested, very good incl. UVV test report Scope of delivery Plasma cutting system with the following accessories: 1 piece AIR T30 hand cutting torch 4.5 mtr. long 1 piece ground cable 1 Piece Instruction Manual Warranty: 18 months from th ...
Punching force: 300kN, max. operating pressure: 300bar, weight: 13500kg, operating hours: approx. 52300h. Documentation available. An on-site inspection is possible.
KIMLA POWERCUT LF1020 fiber laser was built in 2022 in Poland by POLCOM Przemysław Kimla. The machine has worked for a total of 814 hours and is in very good condition. Laser cutting is performed by means of a stable 2 kW fibre beam, which is generated by a resonator of the highest energy efficiency. A focusing lens system inside the cutting head ensures optimum beam geometry for various types of workpieces. As a result, the edges of the machined workpieces are distinguished by their unprecedented smoothness and absence of irregularities. The entire machining process is fully automatic, thanks to the use of an automatic pallet exchange system. This system enables simultaneous loading and unloading of workpieces during cutting, thus increasing production efficiency and reducing machine downtime to a minimum. The POWERCUT LF1020 fibre laser is offered with an extensive range of equi ...
Siemens SITOP UPS1600 Power Supply Item number: 6EP4137-3AB00-2AY0 Type: SITOP UPS1600 Input: DC 24V/43.4A Output: DC 24V/40A Battery connection: DC 24 V / 3 A Weight: approx. 2.5 kg Condition: used Price without VAT per piece Country of origin: Austria Piece1
A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible.
Manufacturer: Wurz Energy Year of Manufacture: 2009 Type of Machine : 340 CHP (Combined Heat and Power) Diesel Generator Set Electrical Power: 340 kW each Thermal Power: 346 kW each Engine: SCANIA DC16-RP Control System: SIEMENS / SCANIA CAN BUS Fuel Consumption: up to 245 g/kWh Fuel: palm oil, rapeseed oil, biodiesel, diesel Operating Hours: 10–13 each (maintenance only) Condition: New, unused Container: 20 ft, approx. 9,500 kg each Find more here - .ucymachines/ Contact us at - sales@ucymachines
CNC Prima Power Laser Cutting & Welding Machine TYPE: Optimo 2545 Basic: X= 4,500mm, Y= 2,500mm, Z= 1,020mm Length of the shaker (per PC): 4000 mm Width 2250mm/ Duty width: 3000mm Height: < 400 mm Process path (with coupled movement): 10,000 mm Loading capacity: 600 kg/m2 Max Speed: 0.5m/s Max acceleration: 0.5m/s2 Max kickback:
PowerPak 560 packaging machine for soft and hard film, fully equipped (cross-cutting, cross-cutter, longitudinal crushing knife, perforating device, and standard longitudinal cutting) features two movable labelers (top and bottom web) 510 mm wide x 590 mm long for pre-feeding 30 A 20 kW Triolabel printing device, Machine designation: GEA Powerpack 560, Construction year: 2017, Mains connection: 3/N/PE 400V 50/60 Hz, Circuit diagram number: ELTL170300
General SKU409X1294 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor115-230 volt CapacityWavelength: 365,385,395,405 and 460 nm With jacketcheck General MakeHonle TypeLed cube 100 IC Floor space1,0x0,40 m Total height0,50 m Weight22 Extra Specifications3x led cube 100 IC with led spot hp, UV chamber size 195x186x195 mm,&:nbsp:Temp range +5°C till +35°C,1x led powerdrive IC 1200 wattOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBevera ...
Engine Brand: IHC/CASE, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/ihc-case-p110-power-unit-u sed/613, , = More information =, , Type: Engine, Year of construction: 1010, Type number: DJA-P110; Transport weight [kg]: 710
General SKU409X1295 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor115-230 volt CapacityWavelength: 365,385,395,405 and 460 nm With jacketcheck General MakeHonle TypeLed cube 100 IC Floor space1,0x0,40 m Total height0,50 m Weight22 kg Extra Specifications3x led cube 100 IC with led spot hp, UV chamber size 195x186x195 mm,&:nbsp:Temp range +5°C till +35°C,1x led powerdrive IC 1200 wattOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBev ...
General SKU409X1296 LocationBarneveld CEcheck Specified Features - Miscellaneous CapacityMax. Irradiation intensity up to 3.000 mW/cm2 Motor100-240 volt CapacityWavelength: 365,385,395,405 and 460 nm With jacketcheck General MakeHonle TypeLed cube 100 Floor space1,00x0,40 m Total height0,45 m Weight25 kg Extra SpecificationsWith 3x UV chambers, type led cube 100 with led spot, chamber size 195x186x195 mm,&:nbsp:1x powerdrive, type 120Oils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBio ...
We sell 9 new gas engines, zero engine hours. Power as follows described Sale due to going out of business. 2 engines 38 kW - WJPower HMG 320 - SAE 3 2 engines 56 kW – WJPower HMG 434 - SAE 3 3 engines 85 kW – WJPower HMG 634 - SAE 2 2 engines 100 kW – WJPower HMG 645 - SAE 2
Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible.
This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information.
This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information.
This Prima Power Platino Fiber laser cutting machine was manufactured in the year 2014 in Italy and has 31631 worktime hours, of which 10574 are laser emission hours. The machine has a laser power of 3 kW.
This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information.
This 5-axis Prima Power Rapido was manufactured in 2012, featuring a cutting area of 4080 mm (X) × 1530 mm (Y) × 765 mm (Z) and a laser power of 3000 W. It handles 3D sheet metal parts efficiently with speeds up to 60 m/min. Ideal for automotive and aerospace applications. If you are looking to get high-quality cutting capabilities consider the Prima Power Rapido machine we have for sale. Contact us for more information.
This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information.
This Prima Power PLATINO FIBER was manufactured in 2015. A robust laser cutting machine featuring a 3000x1500mm cutting area and a powerful 2kw FIBER technology. It includes 2 exchangeable tables and boasts a high reposition speed of 140m/min. With 29,000 machine hours and 25,600 cutting hours, the Prima Power PLATINO FIBER machine we have for sale is regularly maintained. Contact us for more information.
This Finn-Power LP6 was manufactured in 2007. A robust punching machine featuring a hydraulic punch with a 30-ton capacity and a turret hosting 20 stations, including two Multi-Tool stations. It has a large working area of 3000x1500mm, ideal for extensive production needs. Consider the Finn-Power LP6 machine we have for sale. Contact us for further details regarding this punching machine.
The machine is in good technical condition, testing possible after prior agreement. Force (kN) 250 Bending length (mm) 1200 Distance between verticals (mm) 1250 Stroke (mm) 200 Entry without tools (mm) 440 Throat (mm) 120 Consumption (kVA) 9.4 Approach speed (mm/s) 120 Working speed (mm/s) 10 Return speed (mm/s) 150 Stroke - X axis of the back gauge (mm) 625 Speed - X axis of the back gauge (mm/s) 600 Stroke - R axis of the back gauge (mm) 200 Speed - R axis of the back gauge (mm/s) 200 Standard dimensions (L x W x H) (mm) 2200 x 1600 x 2320 Weight (kg) 3450
This Finn-Power LP 8 turret punch press was manufactured in 2008. It features a maximum punching force of 30 tons and a punching working area of 1500 × 3000 mm. The machine includes a threading/tapping unit capable of mounting 6 taps up to M8 and a versatile tool turret. Consider the opportunity to buy this Finn-Power LP 8 turret punch press. Contact us for further details.
Machine type: Cleaning system aqueous Make: LPW Type: PowerJet 670T4 Year of Make: 2010 due to a move and the lack of use, the cleaning system is sold very cheaply. Original price approx. 450.000,00€ The system has two working chambers and is suitable for demanding cleaning tasks, including the application of corrosion protection on an aqueous basis. The machine ran for the last time in 2023 and requires major maintenance before recommissioning.
Converter module -Type: S 909 -Number: 2x module converters available -Price: per piece -Weight: 6.3 kg
maximum number of results exceeded
please refine your search
