137,153 used machines on RESALE, but how to find them? Machine Search
Key data: 90 KW, 1480 1/min
Three-phase motor Part Number: HEFIE2 WK280/4-360T Manufacturer: EMOD 90KW 50/60Hz 690V 1480/1785 rpm. Water-cooled New, from stock.
Without transport trolley Auction-ID: A7-50461-21
Without transport trolley Auction-ID: A7-50461-22
sheet width: 2520 mm plate thickness: 2.0 mm ST plate thickness: 3.0 mm ALU distance between columns: 2600 mm cutting angle: 2.0 ° no. of strokes: ca. 32 Hub/min weight: 1480 kg range L-W-H: 2892 x 1865 x 1430 mm Machine from a sheet metal shop Good condition () Features: - Robust, electric-motor-driven panel shear - Shatterproof, torsion-resistant welded steel construction - Compact and well-organized machine design - Electric-motor-driven backgauge With analog position display Manual fine adjustment from the front - 1x holding-down bar (continuous) - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2040 mm plate thickness: 6,0 mm distance between columns: 2100 mm roll diam. toproll: 180 mm roll diam. bottom roll: 160 mm total power requirement: KW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 3,5 x 0,85 x 1,75 mm Sheet metal bending machine with 3 rollers - 2 driven rollers - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-D11-R11-0000-7DM0 The engine is NEW and fully functional. see pictures for more details.
Auction-ID: A1-50529-643
on casters with footswitch Eyelet size 3.5 mm with rivet stick. Height: 128 cm Width: 120 cm with table, machine only 70 cm Depth: 78 cm Auction-ID: A1-50529-12
Fully functional from plant disassembly Auction-ID: A1-50529-544
Fully functional from plant disassembly Auction-ID: A1-50529-542
Fully functional from plant disassembly Auction-ID: A1-50529-543
Incl. pneumatic cylinder and gearbox Auction-ID: A1-50529-545
Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: ETI, Motor protection switch, original packaging -Type: MS25-10 004600100 -Triggering range: 6.3 - 10 A -Number: 1x switch available -Cardboard dimensions: 85/45/H90 mm -Weight: 0.3 kg
Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, motor protection switch, power switch, power disconnector, auxiliary switch, main switch, on/off switch, cam switch -Manufacturer: ABB, Motor protection switch -Type: MS116-6.3 -Triggering range: 4.0 - 6.3 A -Number: 2x switches available -Price: per piece -Dimensions: 90/45/H90 mm -Weight: 0.3 kg/pc.
Hydraulic motor Manufacturer: Poclain Hydraulics Model No.: MSE11-2-G19-A11-2A50-257EM The product is NEW and fully functional. see pictures for more details.
Right-angle gearboxes Bonfiglioli A 70 4 UH70 P112 LO I= 292.0 with electric motor euromotori 1L112M-6 2.2kw Internal numbers: 627 945 627 946 398000089351 398000107347
Electric motor Manufacturer: SSB Product number: OED-1140 Type: OED-1140.041800.00-AL-B14-S0 55 kW The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details. Internal numbers: 603 787 603 785 603 788 603 789 257398503034, 257398503039, 397695645879, 397695645905
Electric motor Manufacturer: VEM Product number: K21R 200L4 TWS HW 37 kW 1500 rpm The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details. Internal number: 603 791
Water-cooled Three-phase motor Manufacturer: Emod Type: WK132/4-230T 15kW 1430 rpm 13A New part from stock. May show traces of storage.
Electric motor Manufacturer: VEM Product number: K21R 200L4 TWS HW 30 kW 1405 rpm The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details. Internal number: 603 790 257398546147
Electric motor Manufacturer : VEM Model: K21R 160 M4 Power: 11 kW NEW, unused from old stock see pictures for more details.
sheet width: 1350 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.0 mm no. of strokes: max. 35 Hub/min cutting angle: 2.0 Grad table height: 945 mm distance between columns: 1361 mm Control: CIDAN / SIEMENS engine output: 5.5 kW weight of the machine ca.: 1400 kg range L-W-H: 2200 x 2000 x 1550 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - NC electro-motorized backgauge, with digital display Target / actual value stop value input stepless adjustment over the entire travel range - 1x hold-down bar - 1x material side stop - recessed grips in the front support table - Manual cutting gap adjustment from the front - Rear sheet holding device for thin sheets - 1x freely movable foot switch - Operating instructions (PDF) The data for this ad was created with ModulMWS - t ...
motorized front-facing projection screen Auction-ID: A1-48746-198
Lot includes SGM stage parts, Delta DTS parts and other light parts Auction-ID: A1-48746-56
new
: neu : 2024 : 9741 : prompt, Zwischenverkauf v : Türkei : 6500 € : 125.45 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Geared motor Manufacturer: Siemens Article number: FDU1711-2401486 001 2KJ3501-6EM23-2HB1-Z BAZ29-LE90ZLR4P IP 55 50HZ - 60HZ 5.5\3.15 A 3.15A 1.5KW S1 1.75KWS1 1445r\min 50HZ n2:343r\min 60HZ n2:411r\min 22Kg NEW and fully functional, from stock, see pictures for more details. Internal number: 601 133 601 134
Geared motor Manufacturer: Bauer Model: K21R BG40Z-11/DV08MA4 Spur gear gear motor Emotor: 0.37kw 500/415Nm i: 246.5 Weight 41.5 kg NEW, orig. packaging, unused from old stock see pictures for more details. Internal number: 625 855 257398528148
Geared motor Manufacturer: SEW Type: R47 D190S4 The device is NEW and fully functional, see pictures for more details. Internal number: 628 080 257569458011
Lot of 4 Siemens SIRIUS motor starter units. Part numbers: 3RK1301-0AB10-0AB4, 3RK1301-1AB00-0AA2, and 3RK1301-1AB00-1AA2. Made in Germany. Auction-ID: A7-50717-470
Three-phase asynchronous motor from VEM motors GmbH in industrial version with flange mounting (IM B5). The motor has an output of 11 kW at 2950 rpm and corresponds to efficiency class IE3. It is suitable for driving pumps, compressors, fans and other industrial machines that require a directly coupled flange drive. The motor is unused and shows no signs of use. Scope of delivery: 1 three-phase asynchronous motor VEM IE3-W41R 160M 2 TPM HW Without additional accessories Type: IE3-W41R 160M 2 TPM HW Year of manufacture: 2016 Power: 11 kW (15.0 HP) Speed 50 Hz: 2950 min⁻¹ Speed 60 Hz: 3540 min⁻¹ Power 60 Hz: 13.2 kW Voltage: 400/690 V (D/Y), Zone B Current consumption: 19.5 / 11 A Frequency: 50 Hz (also 60 Hz) Power factor: cos φ 0.90 Efficiency class: IE3 (91.4 %) Design: IM B5 (flange) Degree of protection: IP55 Insulation class: 155 (F/B) Bearing DE: 6310 ZZ C3 ...
Used side channel compressor (ring blower) with directly coupled Siemens electric motor, mounted on a common base plate. The system is designed as a pneumatic high-performance pump and is suitable for industrial compressed air and vacuum applications, e.g. in food, chemical or process technology. The device is used and has clear soiling and deposits on the surface due to use. Mechanical damage is not recognizable. Scope of delivery: 1 side channel compressor with Siemens motor 1 black intake silencer (mounted) Machine type: Side channel compressor / ring blower Motor manufacturer: Siemens System description: VWB Kompl. HFM5 Pneumatic High Performance Pump Plant No.: 151505-0000 Inventory No.: 1076515 ― Length: approx. 110 cm Width: approx. 60 cm Height: approx. 70 cm Weight: approx. 175 kg Auction-ID: A7-50729-223
Lot of 4 Siemens SIRIUS electronic/direct motor starter. odels DS1e-x HF 2.4–16A, DS1e-x HF 0.3–3A, and DS1-x. part numbers 3RK1301-0CB10-0AA3, 3RK1301-0AB10-0AB4, and 3RK1301-1EB00-0AA2. Made in Germany. Auction-ID: A7-50717-469
Technical details Type: Electric motor fan covers Configuration: - Pressed steel fan covers - Ventilation grille design - Central mounting opening - Multiple IEC motor frame sizes Visible frame sizes: - IEC 63 - IEC 71 - IEC 80 - IEC 100 - IEC 112 - IEC 132 Application: - Industrial electric motors - Motor cooling systems - OEM motor assembly - Spare parts inventory Construction: - Pressed steel construction - Grey and black industrial coating Estimated quantity: - IEC 63: Approx. 40 pcs - IEC 71: Approx. 20 pcs - IEC 80: Approx. 20 pcs - IEC 100: Approx. 15 pcs - IEC 112: Approx. 15 pcs - IEC 132: Approx. 35 pcs - Miscellaneous/black covers: Approx. 20 pcs - Total estimated quantity: Approx. 140–170 pcs Dimensions (largest cover): - Diameter: Approx. 400 mm - Height: Approx. 140 mm Weight: Approx. 1.8 kg per cover Condition: New old stock (unused) ...
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-50714-4045
Technical details Type: Electric motor components Frame size: IEC 200 Configuration: - Aluminium motor housings with cooling fins - B5 flanges - End shields / bearing end brackets - Motor mounting feet - Cooling fans - Stator laminations - Miscellaneous cast motor components Visible markings: - Piede per carcassa 200 destro - Piede per carcassa 200 sinistro - Flangia 200 B5 Application: - Assembly of IEC electric motors - Industrial motor manufacturing - Spare parts inventory - Industrial machinery Construction: - Aluminium die-cast components - Steel stator laminations - Precision-machined mounting surfaces Estimated quantity: - Motor housings: Approx. 250–350 pcs - End shields: Approx. 80–150 pcs - Cooling fans: Approx. 20–40 pcs - Stator laminations: Approx. 15–25 pcs - Motor feet and brackets: Approx. 150–300 pcs - Miscellaneous castings: 100+ ...
Technical details Type: Electric motor rotor shafts and stator core packs Configuration: - Machined steel rotor shafts - Splined shaft ends - Bearing journals - Keyways and precision shoulders - Laminated electrical steel stator core packs Application: - Industrial electric motor manufacturing - Electric motor assembly - Spare parts inventory - Industrial machinery production Construction: - Precision-machined steel shafts - Laminated electrical steel cores Estimated quantity: - Rotor shafts: Approx. 120–180 pcs - Stator core packs: Approx. 20–40 pcs Dimensions (typical shaft): - Length: Approx. 700 mm - Diameter: Approx. 45 mm Weight: Approx. 12 kg per shaft Condition: New old stock (unused) Observed condition: - No evidence of previous installation - Machined surfaces appear intact - Light surface oxidation from storage only - Stored indoors - Protecti ...
1 item 140-MN-0250 1 pc 140-MN-2000 1 pc 140-MN-1600 1 pc. speaker + shoe KTA 3-25
A6V115HA6 10920/306-932-1 / 0869910 16 As good as new, incl. pallet 60x80x38, Kg45, forklift available, inspection desired. Auction-ID: A1-50807-11
Technical details Type: Electric motor terminal box components Manufacturer: Ducati Energia (selected components) Configuration: - Terminal box covers - Terminal box bases - Junction box housings - Cable gland openings - Gasketed covers with wiring diagrams - Machined mounting plates - Aluminium electrical enclosures Application: - Industrial electric motors - Generator assemblies - OEM spare parts - Electrical terminal connections Construction: - Die-cast aluminium components - Precision-machined mounting surfaces Estimated quantity: Approx. 250–450 individual parts Condition: New old stock (unused) Observed condition: - Factory-produced components - Indoor-stored inventory - Minimal surface oxidation - No visible machining damage - Suitable for OEM spare parts applications Auction-ID: A7-50745-81
A4VG56EP R902197682 Used Incl. pallet 60x80x45 65Kg forklift available, inspection desired. Auction-ID: A1-50807-2
CNC lathe for turning and machining metal parts. CNC control: Fanuc 16 T AA Max. turning diameter: 165 mm Turning length: 100 – 340 mm Diameter above bed: 220 mm Main spindle speed: 50 – 5,000 rpm Main spindle power: 5.5 / 7.5 kW Main spindle bar passing: 65 mm Sub-spindle speed: 50 – 5,000 rpm Sub-spindle power: 3.7 / 5.5 kW Sub-spindle bar passage: 42 mm C-axis: 0.001° Turrets: 2 Tool positions: 2 × 16 Motorized tools: 2 × 16 positions Strokes: X 175 mm / Z 240 – 680 mm Total power: 41 kVA Dimensions (mm): 3,500 × 2,800 × 2,000 Weight (kg): 5,500 Auction-ID: A1-50714-4043
Technical details Type: Electric motor stator assemblies Configuration: - Factory-wound copper stators - Cast aluminium finned motor housings - Laminated steel stator cores - IEC 132M motor frame - 4-pole design Application: - Three-phase AC induction motors - Industrial electric motor assembly - OEM motor production - Spare parts inventory Construction: - Cast aluminium housings - Copper windings with insulated lacing - Laminated electrical steel cores Model designation: T132MB4 NT Estimated quantity: Approx. 8–12 units Dimensions (per unit): - Length: Approx. 240 mm - Width: Approx. 240 mm - Height: Approx. 300 mm Weight: Approx. 18 kg per unit Condition: New old stock (unused) Observed condition: - Factory-wound stators installed in housings - Copper windings clean and intact - No visible corrosion or mechanical damage - Fresh winding lacing and clean c ...
Technical details Type: Electric motor terminal box components Configuration: - Cast aluminium terminal box housings - Terminal box covers - Junction box housings - Cable gland openings - Mounting flanges - Covers with moulded wiring diagrams - Various IEC motor frame sizes Application: - Industrial electric motors - OEM motor assembly - Electrical terminal connections - Spare parts inventory Construction: - Die-cast aluminium components - Precision-machined mounting surfaces Estimated quantity: - Approx. 220–330 cast components Dimensions (largest housing): - Length: Approx. 220 mm - Width: Approx. 180 mm - Height: Approx. 120 mm Weight: Approx. 2 kg per component Condition: New old stock (unused) Observed condition: - Clean castings with no visible corrosion - No impact damage observed - Machined surfaces appear in good condition - Never assembled - St ...
Power supply: 220V, 1 ph, 50 Hz, Total electrical power: 1,1 kW, Water slot milling spindle motors: 2 x 0,55 kW / 220 V / 3ph / 300 Hz, Air consumption: 9 lt/min, Air pressure: 6-8 bar, Min. machinable profile height: 40 mm, Max. machinable profile height: 120 mm, Max. machinable profile width: 150 mm. Auction-ID: A1-50595-38
maximum number of results exceeded
please refine your search
1 € 
