induction motor used for sale

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 315/200/H205 mm -Weight: 15.5 kg

Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm.

Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.

current capacity: 1162 kVA work piece width: 80 mm workpiece length: 6000 mm total power requirement: 1000 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 5 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Furnace 1200 working temperature 100 - 1200 Celsius size 1x1x2m auto door auto bogie Verkäufe Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmaschinen Erodiermaschinen Sonstige Maschinen Kaufgesuche Drehmaschinen Fräsmaschinen Bohrmaschinen Schleifmasc inen Erodiermaschinen Sonstige Maschinen Keramik-, Porzellan- und Smaltenherstellung und -bearbeitung Glasherstellung und Glasverarbeitung Smaltenherste lung und -bearbeitung Labors / Zahnärzte/ Schmuckherstellung Buntmetallgie ßereien Stahlwarmbehandlung Warmbehandlung von dem Aluminium und dessen Legierungen Warmbehandlung von anderen Metallen Kunststoffwarmbehandlung Gummi- und K autschukwarmbehandlung Polyuretanwarmbehandlung Aushärtung vo n den Kompositmaterialien Trocknung der Schweißelektroden Formierprozess der Elektroelemente Wärmbehandlung bei Oberflächenbehandlungen Poreba Gurutzpe Tacchi Gem ...

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

Semi-automatic induction sealer for aluminium foils in closures - Closure sizes 15-60mm - Closure sizes 50-120mm

frequency: 230 Hz workpiece length: 150 mm work piece width: 150 mm temperature max.: ° muffle size (length): muffle size (width): muffle size (depth): mm total power requirement: 210 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Water-cooled high-frequency induction continuous furnace for inductive local heating, activation of getters, hardening & starting and much more

NEW Wok Saro COLDFIRE CW-50A Induction wok induction frying pan. Demonstration device List price 4358€ Ideal for cooking, keeping warm, buffets and so on Combines the advantages of gas and electricity Housing made of stainless steel Optionally adjustable heat levels 1-19 Ease of use Overheating protection Weight 16 kilos gross Dimensions 385 X 520 X 243 mm Connection 400 V / three phases / 5 KW Pan Suitable for induction and gas Diameter 36 cm 5 layers of material for excellent heat transfer Stainless Steel Magnesium/Alu Cast aluminium/aluminium stainless steel magnesium Handle and handle made of stainless steel Weight 3 kilos gross Article code 301-2000 180€ More items - new and used - can be found in our shop! International shipping costs on request!

Recon Part Number: 1231 4275 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

AEG 4 pits induction plate, dimensions: 910 mm x 650 mm x 860 mm.

weight of the machine ca.:5 t

System includes (1) 2x Ambrell Easyheat induction heaters (2) conveyor belt (3) Kelvin cooling system, weight: 235 kg.

The machine was overhauled by the manufacturer in 2022, the coating inside the coil was renewed, the oven was then no longer used, the oven no longer complies with the EMC guidelines, without control, an on-site inspection is possible.

INDUCTION DEVICE FOR HEATING FOR ROLLING BEARINGS AND BALL BEARINGS TYPE TN TERMO38EA 400V-13KVA THE DEVICE IS USED, THE MAGNETIC TEMPERATURE SENSOR IS NEW AND MUST BE INSTALLED

Bartscher Induction Plate 3.5 kw tested

Neumärker Induction Plate 3.5 kw tested-Buttons Signs of use

Description: EUROKERA . Equipped with various steel baskets. Floor size: 700 x 330 mm. Approx. Onsite Dimension. (l x w x h): 900 x 400 x 900 mm, weight approx.: 70 kg

technical data on request !

frequency:5.000-150.000 Hz weight of the machine ca.:10 t Z-axis:45-50 mm X-axis:pneumatisch working lenght:45-50 mm with induction generator Sinak 100PH CN: 26811/100014 built in 2006 with belt filter press Heat exchanger and hydraulic unit

weight of the machine ca.:11 t dimensions of the machine ca.:3x4x4,4 m clamping length max.:1000 mm Automatic Induction-Camshaft Hardening Machine. Last production on this machine Camshaft with lenght 4438,8 mm. Power / Frequency 3 x 140/56 kW / 10/200 kHz Distance between two tcenters is about 1300mm. But induction axis moves 900mm.

Electric motor, electric motor SIEMENS three-phase motor, power motor type 3LE16012BB233GB4 Type V1 Size 225M Motor speed 1475 rpm. Power consumption 84 Ampere Motor power 45 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 60 mm Shaft spigot length 140 mm Wedge groove width in the shaft 18 mm Flange diameter 450 mm Centering diameter 350 mm Pitch circle 400 mm- Flange motor with 8 mounting holes 18 mm Overall length Motor housing without motor shaft 715 mm Overall length Motor housing with motor shaft 855 mm Space requirement L x W x H 855 x 450 x 570 mm Net weight: 320 kg very good condition - New, unused from stock dissolution; used

Electric motor, electric motor LAMMERS three-phase motor, power motor type 1TZ95012AA434AB4-Z Type B3 Size 200L Motor speed 2960 rpm. Power consumption 54 Ampere Motor power 30 kW Mains connection 400 Volt, 50 Hz. Shaft diameter 55 mm Shaft spigot length 110 mm Wedge groove width in the shaft 16 mm- foot motor with 4 mounting holes 19 mm, hole spacing 315 x 300 mm Overall length Motor housing without motor shaft 620 mm Overall length Motor housing with motor shaft 730 mm Space requirement L x W x H 730 x 400 x 520 mm Net weight: 205 kg very good condition - New, unused from stock dissolution; used

Drive motor, DC servo motor LENZE type GFQUBT 112-22 Spindle motor, electric motor Series No. 0239398K Year of manufacture: 1993 Nominal power: 6 kW Operating voltage: 400 DC Nominal current: 18 amps Maximum speed: 1000 rpm. Excitation voltage: 210 VDC Excitation current: 3.4 amps Shaft diameter: 38 mm (shaft with 10 mm key)Shaft length: approx. 76 mm (shaft protrusion from centering edge) Centering flange diameter: 230 mm Bolt circle diameter: 264 mm, 4x 14 mm holes Longlife-speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Speed max. 9000 rpm External fan LENZE type GSD 160 Mains connection: 400 V, 50 Hz. 0.32 kW Overall length : 830 mm (without shaft and centering flange) Overall dimensions L x W x H: 920 x 300 x 460 mm Weight: 130 kg good condition; used

Electric motor, reversing motor, induction motor, reversible motor -Manufacturer: Sesame Motor Corp., Electric Motor Reversible Motor -Type: unfortunately without type designation -Speed: approx. 1480 rpm -Shaft: Ø 11 x 20 mm -Quantity: 3x motor available -Price per piece -Dimension: 150/90/H90 mm -Weight: 3.0 kg/pc.

Spindle motor, electric motor Manufacturer: Baumüller Type: GNAF 132 MV Leistubg: 26kW Rotational speed 1600-3000 rpm 76A 400V

Spindle motor, electric motor Manufacturer: Baumüller Type: GFSG 71 M Leistubg: 2.9 kW Rotational speed 2000 rpm 20.4 A 155 V

DC shunt motor, main spindle motor, servo motor, DC motor, DC motor SIEMENS type 1GG5134-0WH46-6HU7-Z Rated power: 22.5 kW Operating voltage: 38 to 380 volts DC Rated current: 67 A Speed: 50 - 2160 / 4050/5000 rpm Shaft diameter: mm Shaft spigot length: mm Wedge groove width in the shaft: mm- foot motor with 4 mounting holes - with mounted forced fan Overall dimensions L x W x H: approx. 700 x 580 x 350 mm Net weight: approx. 250 kg The drive motor is still ready for operation in a Gildemeister GDM42. You can find the right drive controller under stock number 60343 Further components from Gildemeister can be found under stock number: 60343 , 60346, 60348; used

Gear motor, electric motor, electric gear motor, three-phase synchronous motor -Manufacturer: Sew-Eurodrive, gear motor servo motor -Gearbox: Type KHF47 / A 11 rpm i 131.87 -Motor: Type CMP71S / PK / RH1M / SM1 -Speed: 0 - 2000 rpm -Construction: B5 -Hollow shaft: Ø 35 x 175 mm -Protection class: IP 65 -Dimensions: 600/205 / H210 mm -Weight: 33 kg

Three-phase motor, electric motor, lifting motor -Manufacturer: Balkancar podem, lifting motor up to 3200 kg load -Type: KG 2011-6 -Power: 4.5 kW -Speed: 920 rpm -Shaft: Ø 30 x 85 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 475/345/H355 mm -Weight: 66 kg

1FT5072-0AC71-1-Z

Lammers 16 BG 223-4MA66-Z 225M Electric motor 45 kW Manufacturer: Lammers Type: 16 BG 223-4MA66-Z 225M Nominal power : 45 kW Speed: 1475 rpm Voltage: 3 x 400/690 V Amps: 80 A Frequency: 50/60 Hertz Degree of protection: IP55 Weight: 315 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

There are 2 motors of it. One was the spare engine! Motor low runtime. 1 hour per day every 4 days for testing purposes. Engine overhaul 2009. Electrodes little worn. See photo nameplate for 6000V, 50 Hz, power 1000kW, 1480 1/min. V=595 / A=1020

Properties: Condition: fully functional, with traces of use Color: Grey Color of Scooter: Black Material: steel, plastic, stainless steel Ideal for fast material transport Expertly dismantled and packed Stock: 4 pieces Specifications: Dimensions of the roller conveyor curve Curve 90° Total width outside: 1840 mm Total width inside: 1080 mm Width of the web incl. motor: 630 mm Conveying width/ roll width: 500 mm Roller spacing/ axle spacing: 60/10 mm Drive: Motor SEW-Eurodrive motor included Feet included Side guide included Plastic castors included Belt conveyors Due to the excellent workmanship of the roller conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods ...

Machine condition: cleaned and tested Year of construction: 2013 Main motor incl. Mentor control suitable for KBA RA 106 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

SPARE PART E0033 Drive motor for Heidelberg GTO 46 From 1979 Model Ma No.: 665369 With pulley HDM: 42.101.051 1.5 KW SPAREPART E0033 Driving motor for Heidelberg GTO 46 From 1979 model / serial: 665369 Include disk HDM: 42.101.051 1.5 KW

6th Axis Motor of ABB IRB2600ID robot. Suitable for: Type A & B IRB2600ID-15/1.85 Type A & B IRB2600ID-8/2.0

Gear motor, electric motor, electric gear motor, induction motor -Manufacturer: Panasonic, induction motor with gear box -Engine: Type: M9MZ90GK4CGA 1325 rpm -Transmission: MY9G30B -Shaft: Ø 15 x 30 mm -Protection class: IP 54 -Dimension: 225/130/H135 mm -Weight: 4.4 kg

WEG NBR 7094~ ~ 3 160 M No. 0298 NA 98795 INDUCTION MOTOR M2 60 COD: N HP 15 (20) RPM: 3540 F3 1.15 (53) F 80 K 7.7 IP 55 220/380/440 V 50.0/ 28.9/25.0 A

THREE-PHASE INDUCTION MOTOR MANUFACTURER: EBERLE MODEL: B 130 - L8 No. 075/0106 15 HP 11KW 60 HZ 870 RPM INCOME: 90.0% COS 0.70 IP/IN 5.1 ISOL. F CAT. N REG SL IP 55 FS1.15 BEARING - INTERV. LUB - QT GREASE - TYPE OF GREASE LA 6311.03 20,000 HS 20 g POLYREX LOA 6311.03 20,000 HS 20 g MASS 134 KG

Drill force induction motor

AT-Motor Lombardini Type=LDW1204 general-overtaken in exchange.Deutz-Type=F4M1008 email= info@miw-zeven.de

Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

technical data: Make: Loher Type: A 200L2A-2 Type No: 6889273 Connection: Star 380 V / 70 A kW: 37 kW Rpm: 2955 rpm Note: Runner DS-4

technical data: Make: Loher Type: A 180 MA-2 Types No:: 6239319 Connection: Star 380 V / 42 A kW: 22 kW Rpm: 2930 rpm Note: Size 180 / Runner DS-5

10 pieces of engine with gear without generator and starter construction year 1990 - in 1998 Nissan Primera, Almera, Sunny, Micra, Blubird parcel price

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de