We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,260 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four wires at the same time with one temperature gauge (movable), shielding gas: forming gas grade 95/5 95%N2/5%H2, nitrogen gas, cooling: water-cooled tubes.
used
Electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 315/200/H205 mm -Weight: 15.5 kg
used
current capacity: 1162 kVA work piece width: 80 mm workpiece length: 6000 mm total power requirement: 1000 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,5 x 5 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Connected load: 84kVA, length: 5065mm, width: 1100mm, height: 1530mm.
used
frequency: 230 Hz workpiece length: 150 mm work piece width: 150 mm temperature max.: ° muffle size (length): muffle size (width): muffle size (depth): mm total power requirement: 210 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight of the machine ca.:5 t
used
frequency:5.000-150.000 Hz weight of the machine ca.:10 t Z-axis:45-50 mm X-axis:pneumatisch working lenght:45-50 mm with induction generator Sinak 100PH CN: 26811/100014 built in 2006 with belt filter press Heat exchanger and hydraulic unit
used
weight of the machine ca.:11 t dimensions of the machine ca.:3x4x4,4 m clamping length max.:1000 mm Automatic Induction-Camshaft Hardening Machine. Last production on this machine Camshaft with lenght 4438,8 mm. Power / Frequency 3 x 140/56 kW / 10/200 kHz Distance between two tcenters is about 1300mm. But induction axis moves 900mm.
used
Qty. 1 Second-hand hardening and tempering tube furnace Type of furnace: Roller Hearth Type Hardening & Tempering Furnace Line Mfc.: HANJUNG FURNACE TECH Built: 2012. Effetive Size: Hardening Furnace: ø2380 mm x 57800 mm Shifting rolls: 34 sets Tempering Furnace: ø2380 mm x 61200 mm Shifting rolls: 28 sets Capacity: Max. 30 Ton/H Normal: 25 Ton/H Pipe Dia. 76 – 305 mm (3" ~ 12") Total power: 700 kW Heat Treatment: Quenching & Tempering Normalizing Scope of supply: Charging Table Hardening Furnace Quenching Transfer Conveyor Tempering Furnace Entry Conveyor Stock Conveyor Water Cooling System Control System Exit Conveyor Quenching Tank Discharging Conveyor
used
Hardening furnace ZWUT PSK-1 built by ZWUT. It is intended for various types of laboratory and industrial work. Technical data : - power consumed at T = 1350 degrees C: 4,10 kW - installed power: 5.5 kW - power supply voltage: 220 V, 50 Hz - secondary voltage of the autotransformer: 7-41, 1-3-58, 9-5-84, 4 - number of phases: 1 - nominal temperature: 1350 degrees Celsius - temperature control accuracy: 1.5 (or 0.2 + /%, when working with a feedback attachment) - type and number of silites: 8/150/150/10 mm / pcs - warm-up time to T: about 3.5 hours - usable dimensions of the heating chamber (height x width x length): 150 x 150 x 280 mm - furnace weight: 138 kG - weight of the cabinet: 81 kG
new
Gas-fired continuous furnace, make VEI type: DLO_GB heated length: 4000 mm conveyor belt width: 900 mm emperature: max. 950 ° C
new
Shaft furnace,make VEI type: SCO_EB height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C
used
Maximum temperature 1100 C, Interior 400 x 200 x 400 mm more info on request
used
Zinc melting tank make RAUCH type ZSB 453-RMasch. -No: 1351 built in 1997Technical specifications:Max. Melt content: 400 kgNet capacity: 350 kgMax. Melting temperature: 440 degreeBlank value at 420 degree: 0.8 kWExternal dimensions approx: 635 x 500 x 760 mmWeight approx. 230 kgPower consumptionWith- Control cabinet: 3.0 kW- for transporting and / or keeping warmxa0xa0 Die casting alloys with max. 5.0% Al- Melting of frozen material possibleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric chamber furnace with silicon rod, make ELIOG VEB Römhild, type KO 14Fabr. -No: 85/11010012 built in 1985Technical specifications:Furnace interior dimensions H x W x D: 100 x 150 x 250 mmNominal temperature: 1350 °Nominal power: 4.0 kWHeating-up time 20 ° to 1350 °: 4.92 hours.Cooling time 1350 ° to 675 °: 2.25 hoursWeight of the oven approx: 82 kgExternal dimensions H x W x L: 440 x 475 x 595 mmWith- Thermoelectric transmitter and limit indicator- Control system L x W x H 600 x 460 x 700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Gas-heated annealing and hardening furnace make SCHNEIDER GmbH Witten type 6 KMachine -No: 31 built in 2002Technical specifications:Chamber size W x D: 1200 x 900 mmin the rear part of the chamber step downwards: depth 500 x height 400 mmOpening W x H: 1200 x 470 mmmax.temperature: 1300 °Connected load: 300 kWHeating medium: natural gasExternal dimensions approx. W x D x H: 2200 x 2600 x 2650 mmWeight: 5850 kgWith- MEILI hand winch for opening the oven door- Attention without switch and control cabinet!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hardening testers Manufacturer Zwick& Co. KG. Wolpert or others For testing or measuring the -RockwellC, MPA and JHT -Vickers hardness - and other Extensive accessories of weights, measuring plates, test diamond Special price
used
hardening furnace 1200 1x1x2m (possible various sizes) t max 1200C Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Afspændingsglødnng Hiærdning og anløbning Carbonisering (indsætning) Anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Ovne og anlæg til anløbning, glødning, hærdning, afhærdning, opløsningsglødning, smedning, udhærdning, forvarmning, tørring, ældning Varmebehandling Preshærdning Karbonitre ...
used
max. temperature: 1150 Grad size of opening: 260 x 160 mm depth of chamber: 450 mm total power requirement: 8 kW weight of the machine ca.: t Hardening furnace The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 800 mm, 1400 , 2700
in stock, as good as new, with 12 months warranty -max. temperature 800 °C -Application temperature 750 °C -Heating time from 15 °C to 700 °C approx. 3-5 hours -Insert mass complete 2600 kg -Connected load heating 4 x 47.25 kW = 189 kW -2 compact fans -Furnace circulation capacity approx. 3,000 x per hour -Control zones 4 pieces -Program control IMAGO 500 -Touch panel TP 700 Color -Overtemperature controller -Thermocouple regulator 4 x NiCr/Ni type K; Class 1 -Thermocouple overtemperature 2 x NiCr/Ni type K; Class 1 Furnace volume 6.0 m³ Internal dimensions: Width (clear) approx. 1400 mm Depth (clearance) approx. 2700 mm Height (clearance) approx. 1600 mm Height of furnace base approx. 585 mm External dimensions: Width (without switchgear) 2300 mm plus switchgear approx. 500 mm Depth 3300 mm Height (with lifting door) 4200 mm (transport height 3100 mm) ...
used
max. temperature: 750 Grad size of opening: 600x600 mm depth of chamber: 1800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. temperature: 1350 Grad size of opening: 300 mm depth of chamber: 600 mm total power requirement: 25 kW weight of the machine ca.: 1,5 t : : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h Exter ...
used
Glasbeek Finish Gas Poederwand Chamber Oven 250°C Glasbeek Finish Gas Poederwand Chamber Furnace Maximum temperature 250°C Electrical connection 8 kW 51 KW 3x400V YOC 2003 Approximate internal dimensions (W1200mm x D3100mm x H1400mm) with loading trolley L2800 x W1020mm Approximate external dimensions LxWxH approx. 320x240x250 cm
used
Glasbeek Finish Gas Chamber Furnace Type G.11.01, 250 ° C Glasbeek Finish Gas chamber furnace Type G.11.01 Maximum temperature 250 ° C Approximate internal dimensions (W1400mm x D1900mm x H1985mm) 6m³ Bogie dimensions approx. (1000 mm x 1800 mm x H250 mm) YOC 1992 3 x 380 volts 41 kW
used
Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)
used
Electrically heated tempering furnace make HERAEUS GmbH Hanau type HM 13Machine -No: 28024, wiring diagram no. 1641Max. Nominal oven temperature: 1150 °Internal dimensions W x D x H: 400 x 650 x 250 mmRated power: 20 kWExternal dimensions: 1500 x 1300 x 1700 mmWeight: 940 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrically heated tempering furnace make HERAEUS type HM 13Machine no .: 21103283 / 2832-01 Year of construction 1980 m. Inert gas annealing muffleMax. Nominal oven temperature: 1150 °Max. Inert gas muffle: 920 °Internal dimensions: 400 x 250 x 650 mmRated power: 20 kWContent of the gas-flushed room: 68 lOutside dimensions: 1385 x 1915 x 1705 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
2 convection ovens make HERAEUS type UT 5050 EKYear of construction 1981Maximum temperature: 300 ° CInside dimensions W x H x D: 435 x 400 x 480 mmVolume: 105 lelec. Connection: 220 V, 2 kWExternal dimensions W x D x H: 800 x 650 x 670 mmWeight approx .: 65 kgsecond handPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hardening Furnace Fabr. NOLZEN Type KHR 30/20/50Machine No: 12272 Year 1968Internal dimensions: 300 x 200 x 500 mmMax. Temperature: 1100 °Max. Connected load: 14 kWOutside dimensions: 850 x 950 x 1600 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace Fabr. LEADING type KMO / E 8Machine -No: 301077/89 Year 1989Max. Temperature: 1.200 °Internal dimensions W x H x D: 500 x 315 x 800 mmDrive value: 25.5 kWExternal dimensions L x W x H: 1700 x 1500 x 2100 mmWeight approx: 2000 kgWith- automatic pneumatic doorused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Air conditioner make HERAEUS / VÖTSCH type VEM 03/2240 LFabr. -No: 29515 built in 1988Temperature range from: -30 ° - + 100 ° CDimensions interior W x D x H: 1480 x 780 x 2000 mmHeat compensation + 20 ° C approx.: 1500 W+ 10 ° C: 1300 W+/- 0 ° C: 1100 W-10 ° C: 900 W-20 ° C: 600 WRefrigerant: R 502Refrigerant pressure: 1.6 barpermissible operating pressure: 23 barTemperature deviations: +/- 10 ° CConnected load: 380 V, 5.5 AProtection class: IP 20Weight approx .:510 kgWeight of control cabinet approx .: 310 kgDimensions oven: 2200 x 1000 x 2300 mmDimensions control cabinet: 800 x 600 x 2200 mmWith- Test room made of stainless steel- Pipe penetration 50 mm Drm.- Pipe penetration 80 mm Drm.- Door lockable, 2 leaves, door size 1430 x 2000 mm- Observation window 500 x 1000 mm- Separate electrical and control cabinetvery little used, in very good conditionPrice on request.Delivery: e ...
used
Warming cabinet make HERAEUS type T 6030Best. -No: 51000066 Machine -No: 8903337, built in 1989Max. Temperature: 300 °Internal dimensions: 370 x 352 x 231 mmInterior volume: 30 lHeating time of 25 ° C on300 ° C: 75 min.150 ° C: 30 min.70 ° C: 15 min.Curb weight: 40 kgOutside dimensions approx: 610 x 552 x 552 mmused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Climate cabinet Fabr. TENNEYFabr -No: 577066J197Internal dimensions: 350 x 250 x 200 mmMax. Adjustability cold: - 88 ° CMax. Adjustability heat: + 176 ° CExternal dimensions L x W x H: 950 x 610 x 1700 mmWith- mobile undercarriage- stepless temperature adjustment- Timer- autom. cycle settingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric Hardening Furnace Fabr. PEDE Type M 3 / SFabr. -No: 1075 Com. -No: 5875 Year 1987Max. Temperature: 1200 °Internal dimensions approx: 280 x 200 x 700 mmOutside dimensions approx: 980 x 1100 x 970 mmElectricity requirement: 13 kWPower connection: 380 V / 50 HzWith- Timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Zinc melting furnace RAUCH ZSO 450 BMasch. -No: 70112/836597 Year of construction 1997Technical specifications:Max. Temperature: 450 degreeHeating output: 96 kWWeight approx: 1300 kgWith- 1 control cabinet- ZFB conveyor belt including drop chuteusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hardening furnace make NABER type 8 / LFabr. -No: 62604 built in 1984Technical specifications:Max. Temperature: 1260 ° CInternal dimensions approx. W x D x H: 700 x 900 x 1200 mmDrive power: 27 kWWith- Controller C8usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 0218Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric hardening furnace (muffle furnace) make HERAEUS type MR 260Machine -No: 7106536 built in 1971Technical specifications:max.temperature: 1000 °Dimensions approx: 800 x 600 x 1300 mmWith- underframeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WL 20/16/30Machine -No: 3517 built in 1971 Technical specifications Max. Temperature 1150 ° Internal dimensions 200 x 160 x 300 mm Electrical consumption 6.0 kW Power connection 380 V / 50 Hz External dimensions approx. 600 x 700 x 1000 mm With - Temperature display / timer used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WS 20/19/45Machine -No: 3191 built in 1972Technical specifications:max.temperature: 650 °Internal dimensions: 200 x 190 x 500 mmElectrical consumption: 3.6 kWPower connection: 380 V / 50 HzExternal dimensions approx .: 600 x 700 x 1200 mmWith- Temperature display / timerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electric annealing furnace make NOLZEN type WL 20/19/50Machine -No: 3241Technical specifications:max.temperature: 1150 °Internal dimensions W x H x D: 210 x 190 x 500 mm:Electrical consumption: 9.5 kWPower connection: 380 V / 50 HzExternal dimensions approx. 1050 x 610 x 1630 mmWith- underframe- temperature displayusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electrode heater make KÜPPERSBUSCH type SET 10Machine -No: 1937 built in 1980Technical specifications:Internal dimensions approx: 230 x 250 x 470 mmControl voltage: 220 VPower: 2.0 kWExternal dimensions approx .: 410 x 370 x 690 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Glasbeek Finish Gas Chamber Oven G.11.01 200°C 54kW Glasbeek Finish Gas chamber furnace Maximum temperature 200°C Electrical connection 4 kW 54 KW 3x380V Approximate internal dimensions (W1900mm x D3000mm x H1880mm)
used
Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)
used
Key data: 1280
Vertical tempering furnace Electric 1280°C Nabertherm N5000/S Used high chamber furnace, overhaul possible on request - Tmax 1280°C - Capacity 5000 liters - External dimensions w x d x h 1600 x 2200 x 4000 mm - Net weight 7000 kg - Rated power 198 KW - Documentation Viewing possible by appointment at any time.
used
1) a forging table or curing furnace or also called forging furnace of Flamefast type DS330 Ceramic Chip Forge, with hood and suction 2) a quenching bath or cleaning bath or also called hardening bath, type WO 200. Both hardly used. NP both together at about 6000€, Singles: 1100 and 1450
used
temperature max.: 660 ° muffle size (length): 1000 muffle size (width): 1000 muffle size (depth): 1000 mm total power requirement: 9999 kW weight of the machine ca.: 30 t dimensions of the machine ca.: 10 x 10 x 10 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
General: Year of construction 1985 Nominal temperature 350° C Power 6 kW
used
We offer 42 heat-resistant V2A charging racks including grids for hardening furnaces.
used
Inv. Num. : 6500 Type: HT Producer: BMW Created: 2015 Parameters: Maximum temperature: 850 C Internal dimensions of the machine (LxWxH): 1650x1500x1900 mm Capacity: 2000 kg Nominal current: 250 A Control voltage: 3 PEN 50Hz 230V/TN C-S 24 V DC