induction furnace used for sale

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...

1. Qty. 3 Bell Batch Annealing Furnaces (Pair of bases 1-6) Mfc.: EBNER Type: HOG 180/320 St – H2 Built: 1989 Stopped: 2025 Each pair of bases (units: 1-2, 3-4, 5-6) has one cooling hood and one heating hood. Coil Max. outer diameter: 1,650 mm Max. stacking height: 3,200 mm Hood dia.: 2000 mm Useful dia. (inner hood): 1800 mm Useful height (coil dia. 1540 mm): 3400 mm Useful height (max. coil dia. 1650 mm): 3200 mm Max. base load: 50 T 2. Qty. 1 Bell Batch Annealing Furnaces (Pair of bases 7-8) Mfc.: EBNER Type: HOG 180/230 St – H2 Built: 1989 Stopped: 2025 Coil Max. outer diameter: 1,650 mm Max. stacking height: 2,300 mm Usefull dia. (inner hood) 1800 mm Hood dia.: 2000 mm 2 Protective hoods with inner shell Max. temp. under hood: 750 °C Maximum base load: 35 t 2 Control stations

oven 10 - 1150 Celsius inner 1x1x2m plc auto door various size possible Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammhärten Anlassen / Glühen Bainitisieren Entspannen / Anlassen Anlassofen Aushärteö fen Chargentrockner Drucksinteröfen Durchlauföfen Kipp – Tiegelöfen Laboröfen siehe Lack – Einbrennöfen Lack – Trockenöfen Messing – Glühöfen Muffelöfen Magnesium –Schmelzöfen Ölversorgungsanlagen Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfe n Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce  ...

Glasbeek Finish Gas Chamber Furnace Type 003.05 Glasbeek Finish Gas chamber furnace Type 003.05 With loading trolleys Maximum temperature 200 ° C Approximate internal dimensions (W1900mm x D2950mm x H1800mm)

Electrically heated bogie hearth furnace for a maximum operating temperature of 1280°C. The heating system consists of five control zones. Heating is provided by the sides, rear wall, door and carriage. Heating wire made of APM wire mounted on support tubes. Connected load oven: 75 KW. Incl. 2 fresh air blowers, 2 pcs air heaters, housing cooling with 2 pcs medium-pressure fans, automatic ceiling flaps, insulated stainless steel hood, 2 pcs hearth trolley with SiC plate cover (steerable, on PVC castors, not track-bound) and original switchgear with Windows PC (hardware: Siemens SIMATIC Rack PC). Furnace chamber dimensions (WxDxH): 900 mm x 1,900 mm x 900 mm (= 1.53 m³); Dimensions usable space (WxDxH): 750 mm x 1,840 mm x 850 mm (= 1.173 m³). Weights: Approx. 3,800 kg (oven and attachments); Approx. 850 kg (switchgear).

Tube furnace Manufacturer: Nabertherm Type R170/750/12 These compact tube furnaces with integrated controls can be used universally for many processes. Equipped with a standard C 530 ceramic working tube and two fiber plugs, these tube furnaces offer unbeatable value for money. • Tmax 1200 °C • Single-zone design as standard • Double housing made of textured stainless steel sheets • Only fibrous materials that are not classified as carcinogenic according to TRGS 905, Class 1 or 2 are used • Outer tube diameter 170 mm, heated length of 750 mm • Work tube made of C 530 ceramic with two fiber connectors as standard equipment • Tmax 1200 °C: Type N thermocouple • • Solid-state relays ensure low-noise operation • Defined application within the limitations of the user manual • NTLog Basic for Nabertherm controllers: recording of process data with USB  ...

Pizza open Middleby Marshall

max. temperature: 1000 Grad size of opening: 170 x 90 mm depth of chamber: 280 mm total power requirement: 3 kW weight of the machine ca.: 80 kg dimensions: 0,7 x 0,55 x 0,72 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

SAFTherm STT-960-12A quenching furnace was built in 2024 in China by Henan Sante Furnance Technology Co., Ltd. The machine is designed to harden metal parts at a maximum temperature of 1200°C. Hardening is a heat treatment process for steel, the purpose of which is to significantly increase the strength, hardness and wear resistance of the material. During this process, the steel is heated to a specific temperature maintained for a defined time and then rapidly cooled. This causes changes in the material’s internal structure that translate into improved mechanical properties. This makes the hardening process widely used in the manufacture of tools, machine parts and structural elements used in many industries. The SAFTherm STT-960-12A is a low-vacuum furnace designed for operation in a controlled atmosphere. Its large work chamber with dimensions of 800 x 1200 x 1000 mm enables the ...

SAFTherm STDR-960-12A tempering furnace was built in 2024 in China by Henan Sante Furnance Technology Co., Ltd. The machine is designed for tempering steel at a maximum temperature of 850°C. Tempering of steel is one of the heat treatment processes designed to reduce the internal stresses created by hardening and improve the mechanical properties of the material. The process involves heating the steel to a specific temperature below the eutectoid transformation temperature, maintaining this temperature for a defined period of time and then cooling it down in a controlled manner. This gives the steel greater fracture toughness and improved resilience. The SAFTherm STDR-960-12A is a low-vacuum furnace designed for operation in a controlled atmosphere. Its large work chamber with dimensions of 800 x 1200 x 1000 mm enables the treatment of single workpieces as well as larger series. The  ...

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Drive gear to mains belt furnace NBO Winkler from spare parts warehouse unused

General description Industrial electric melting furnace designed for non-ferrous metals such as aluminium, bronze, and brass. Suitable for small foundry or casting workshop applications. Technical details Type: Electric resistance melting furnace Configuration: Cylindrical top-loading design Operation: Electric heating with external control system Capacity: Approx. 100–300 kg (depending on material) Temperature range: Approx. up to 700–1000°C Power: Estimated 15–50 kW Chamber: Refractory-lined (visible wear and cracking) Lid: Manual operation via chain and hook lifting system Control: External electrical cabinet with contactors, thermal relays, and frequency inverter (ELDI/DF) Additional: Adjacent handling/pouring area Equipment - Refractory-lined furnace chamber - Heavy steel shell construction - Manual lifting lid mechanism (chain + hook) - Electrical contr ...

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Glasbeek Finish Gas Chamber Furnace Type G.11.01 Glasbeek Finish Gas chamber furnace Type G.11.01 With loading trolleys Maximum temperature 200 ° C Year. 1991 3 x 380 V 54 kW Approximate internal dimensions (W1900mm x D2940mm x H1965mm)

Cieffe FNCm 2.5/0.8/1500 Hardening furnace Chamber furnace 1120 °C Manafacture: Cieffe Type: FNCm 2.5/0.8/1500 Max temperature: 1120 °C Series: 4185/1B Rated Current: 70A 37 kVA 400 volts Year: 2000 More items - new and used - can be found in our shop! International shipping costs on request!

-the baking surface: widht is 210cm height is 22cm length is 2100cm, -oven ext. dimension aprox is 300 x 2100 cm - PLC controler - stanless steel plating -steam device -dismantled

Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device

Naber Hardness Kiln 380 V 12 A max. 1260 C Length 1 m Width 0.87 m Height 1.47 m Temperature Processor TP 10 850 - 1250 C pre-programmed

Pyrolysis furnace ECON EPO 300 Condition: as good as new, only used 10 times

1 Melting Furnace Mfc.: De Winter Built: 2014 Type: 2 Chambers furnace Capacity: 75 Ton – 6.5 t/h

Availability: immediately Condition: in working order, new mesh belt Dismantling: by buyer Overall length: approx. 26,500 mm Length of baking chamber: approx. 24,000 mm Overall width: approx. 2,650 mm Net belt width: approx. 1,700 mm Usable width/working width: approx. 1,500 mm Inlet length: 1,000 mm Spout length: 1,300 mm Sheet metal: painted white

1 Tilting Casting Furnace Mfc.: Thermcon Built: 2002 Type: 25 T Natural gas 7560 kcal/Nm³ Main burner: 1.9 MW Sec. Burner 0.6 MW

KASTENOFEN ZUM EINBRENNEN VON PTFE TEFLON BESCHICHTUNGEN Konvektionsofen zum Aushärten von PTFE-beschichteten Werkstücken Maximale Temperatur - 500ºC Heizquelle - Elektrizität Erzwungene Zirkulation Innenraum aus rostfreiem Stahlblech AISI304 200mm Dicke der Isolierung

Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm electr. Connection: 400 V kW Space requirement: 1200 x 870 x 1810 mm Weight: 470 kg Heating capacity: 16.5 kW

Qty. 1 Second-hand Aluminium Melting Furnace Mfc.: Sistem Teknik Type: SAMHF-6 Stationary Alu melting/holding furnace Built: 1/2015 Stopped in 4/2015 Recycling capacity: 5000 Ton/annum Charging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc. Natural gas 6 ton melting furnace Made in Europe CE standard of quality and pollution control Casting capacity of 20 ton of aluminium per day PLC automatic control unit including HMI system – Siemens Qty. 2 proportional control gas burners

Inv. Num. : 8091 Type: VP Producer: SECO/WARWICK Created: 2024 Parameters: Control system: Siemens S7-1500FS series Maximum temperature: 1300 C Internal dimensions of the machine (LxWxH): 1500 x 1700 x 1700 mm Capacity: 3000 kg Working vacuum: 5x10-2 mbar

Muffle kiln, e.g. for colour firing of ceramic overglaze paints. Make no. 15297 max. temperature °C 1000 400 Volts, 50 Hz Year of manufacture 2004, little used External dimensions H 1750, L 1760, W 1360

0: 1200 °C internal diameter: 210 mm internal length of the oven: 1000 mm total power requirement: 25,2 kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: BTH 1,3 x 1,6 x 1,8 m Hochtemperatur ROHROFFEN - Labor Split - Tube Furnace Kelltool Furnace GAS H2 und N2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - / Contact us at -

XVAC 1450 furnace system Sintering furnace up to 1,450°C, XVAC series Technical data: Design type Cold wall system, top loader, retort furnace charging rack. Three substrate levels made of perforated aluminum oxide Lid procedure Manually Heating elements Molybdenum disilicide Usable space size Ø 60 mm, height 200 mm, max. temperature 1.450 °C (N2, Ar, Ar+H2) 1,400 – 1,450 °C (Vacuum) gas lines 1 The gas species Nitrogen Argon (option) Argon + max. 5 % H2 (alternatively) vacuum pump Rotary vane pump Agilent DS40M final pressure

degree: 0 working heigth: mm length: mm width: mm depth: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quenching of the Batch The batch is quenched by immersion in a quenching medium (oil). --------------------------------------------------------------- Dimensions and Weights Overall Dimensions (including control system): - Width: approx. 3400 mm - Height: approx. 5600 mm - of which recessed in the pit: 650 mm - Length: approx. 5500 mm - Minimum required hall height: 7000 mm - Working height above floor level: 1200 mm --------------------------------------------------------------- Base Grate Dimensions: - Width: 705 mm - Height: 50 mm - Length: 1100 mm --------------------------------------------------------------- Usable Batch Space (including base grate): - Width: 700 mm - Height: 950 mm - Length: 1100 mm - Grate loading height: 900 mm - Gross batch weight (incl. base grate): 1000 kg --------------------------------------------------------------- Oil Bath: - Oil capacity: app ...

We are offering for sale 2 Units of Rauch MDO650 with Dosing Pipe System and Mass Preheating Station ( mass feeding via robot is not included) : Unit 1 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: Mass preheating station MVE 750 E - Year of Manufacture: 2015 Unit 2 Manufacturer: Rauch Model: MDO650 E Melting Capacity: 650 kg/h Holding Capacity: 2,020 kg Year of Manufacture: 2015 Includes: - Mass preheating station - Year of Manufacture: 2015 Find more here - / Contact us at -

Manufacturer: Rauch Model: MDO1000 E with dosing pipe system and ingot preheating station Year of Manfucture: 2018 Ingot preheating station - Year of manufacture: 2014 Specifications: - Melting capacity: 1,000 kg/h - Holding capacity: 2,950 kg Find more here - / Contact us at -

High-temperature chamber furnace with an operating temperature of up to 2,000 °C, including water cooling and sequence control with automatic valves. Usable space: 600 mm x 600 mm x 600 mm (= 220 l.), el. Power: 117 kW,

1. Qty. 1 Second-hand slab gas fired pit type furnace Manufacturer: Tehnika Set Type: Gas heated (2 Zones) Built: 2001 Stopped: 2019 Power: 110kW Number of heating units: 8 Dim.: 2622 5084 x 6294 mm – H x W x L Inner dimension per zone: LxWxH – 380026001635 mm Load weight max. / 2 zones: 42.000 kg Max. Slab number per zone: 5 Slab length: 3000 mm Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. Temp.: 630 °C

2. Qty. 9 Second-hand slab pit type furnaces Mfc.: Ebner Type: Electrical heated Built: 1970 Stopped: 2019 Power: 600 kW Number of heating units: 5 Weight capacity: 20.000 kg Voltage supply: 380 V, 50 Hz Compressed air: 5 bar Max. temperature: 650 °C Slab number: 7 slabs; 8 slabs, if the width 700 - 800 mm and 10 slabs, if the width 700 mm Slab length: Max. 3300 mm (in furnaces 1 to 5) and Max. 3000 (in furnaces 6 to 9) DIMENSIONS (outer): 2000 x 2580 x 4080 mm – H x W xL

Key data: 900 °C, 250 mm, 220 mm

Maximum temperature: 900° Celcius Inner dimensions LxWxH: 220 x 250 x 200 mm Country of origin: Germany Weight: 300 kg Oven outer dimensions LxWxH: 1000 x 700 x 1400 mm

Key data: 700 °C, 30 mm, 1500 mm

Temperature max: 700° Celcius Opening LxH: 1,500 x 30 mm Country of origin Netherlands Electrical power: 14 kW Machine LxWxH: 2,000 x 1,000 x 1,700 mm Machine weight: 1500 kg

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

max. temperature: 1100 Grad voltage: 230 V output: 3 kw range - high tensile: Innen 295x230x125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A smoke melting system is available. Components: Furnace, conveyor belt, electric stacker, melting container, ingot casting belt. Total plant dimensions X/Y/Z: approx. 6000mm/3500mm/3800mm, total plant weight: approx. 4500kg. Documentation available. On-site inspection is possible.

degree: 650 working heigth: 250 mm length: 250 mm width: 250 mm depth: 450 mm total power requirement: 8 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1150 Grad size of opening: 260 x 160 mm depth of chamber: 450 mm total power requirement: 8 kW weight of the machine ca.: t Hardening furnace The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three identical Gullco electrode ovens are available for drying and stabilizing welding electrodes. Internal dimensions X/Y/Z: approx. 350mm/400mm/480mm, max. electrode length: 450mm, max. temperature: 550°C, power consumption: 1.5kW, machine dimensions X/Y/Z: approx. 560mm/560mm/620mm, weight: approx. 160kg. Documentation available. On-site inspection is possible.

max. temperature: 420 Grad size of opening: 200 mm depth of chamber: 350 mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 1350 Grad size of opening: 300 mm depth of chamber: 600 mm total power requirement: 25 kW weight of the machine ca.: 1,5 t : : : : : Hardening Furnace Temp. 1350 °C H E R E A U S Electrically heated Hardening Furnace with Double Chambers for preheating and hardening. Model DKM 5 Year 1965 ______________________________________________________________ Temperature range max. chamber 1 1.000 °Celsius Temperature range max. chamber 2 1.350 °Celsius Door opening 300 x 200 mm Chamber size width x height x depth 300 x 200 x 500 mm For chamber 2 300 x 200 x 600 mm Working height above floor 1.050 bzw. 1.625 mm Heating up time 20°-1.350° = hardening chamber 2,75 h Heating up time 20°-1.000° = preheating chamber 2,00 h Exter ...