independent chuck used for sale

Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 130 mm / M8 -Clamping plate: approx. 250 x 250 mm, dimensions see photo -Weight: 25kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change adapter, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: taper: MK2 / 26 mm -Measurements: see photos -Dimensions: Ø 52 x 146 mm -Weight: 0.7 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change adapter, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: taper: MK3 / 32 mm -Measurements: see photos -Dimensions: Ø 60 x 173 mm -Weight: 1.2 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, milling holder, quick-change adapter, collet chuck, reducing sleeves, clip-on holder -Quick change chuck: taper: MK4 / 32 mm -Measurements: see photos -Dimensions: Ø 72 x 210 mm -Weight: 2.1 kg

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: 95/95 / H65 mm -Total weight: 2.9 kg

Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, drill chuck holder, drill chuck holder, taper mandrel, MT insert shank -Manufacturer: Albrecht, drill chuck holder -Hoffmann: Art.-No .: 342600 3/24 -Morse taper: MK3 -Drill chuck: B24 -Dimensions packaging: 165/30 / H30 mm -Weight: 0.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set, 4-piece hard -Jaw width: 38 mm -Dimensions: 130/150 / H90 mm -Total weight: 8.8 kg

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck, three-jaw chuck with clamping plate -Manufacturer: Rohm, three-jaw chuck with clamping plate -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Clamping plate: 500 x 310 mm -Dimensions: 500/310 / H300 mm -Weight: 72 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Quick change chuck: arbor MK5 -Tool holder: MK4 -Dimensions: Ø 68 x 327 mm -Weight: 4.5 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Manufacturer: Roto Record, 2 quick-change chucks / 6 sleeves -Types: FW4 RSWF 4 recording MK4 -Quick-change sleeves: 4x MK2, 1x MK3, 1x MK4 -Dimensions: 220/80/240 mm -Weight: 8.3 kg

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW, thread cutting chuck mount MK3 -Types: GB3 -Dimension: Ø 80 x 270 mm -Weight: 3.7 kg

Wedge bar chucks, power chucks, three-jaw chucks, three-jaw lathe chucks -Transfer: in the current condition as seen -Base plate: slight damage to the outer edge, see photo -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Hole circle: Ø 235 mm -Cone: Ø 195/150 mm -Through hole: 60 mm -Dimensions total: Ø 400 x 265 mm -Weight: 67 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, cutter head holder, milling arbor, power chuck -Manufacturer: NT Tool, high-performance power chuck in original packaging -Type: SK40-CT20S-105 -Clamping Ø: 20 mm -Number: 2 pieces -Price: per piece -Dimension box: 240/100/H125 mm -Weight: 2 kg/piece

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4 pieces, hard, 2 sets -Jaw width: 25 mm -Price/sale: only complete -Dimensions: 200/90/H55 mm -Total weight: 4.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Rohm, base jaws for four-jaw chuck 2 set -Type: ID.: 107546 jaw width 20 mm -1 set: with soft top jaws, width 30mm -Price/sale: only complete -Dimensions: 200/90/H70 mm -Weight: 4.7 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Collet holder: SK50 -Type: SK50 D32 A71 CNB-01 -Tensioning sleeve: Ø 25 mm -Dimensions: Ø 98 x 200 mm -Weight: 3.5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 76 mm -Take: short taper 6, cone Ø 105 mm -Dimension: Ø 210 x 65 mm -Weight: 3.5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 220 mm -Inside: Ø 100 mm -Dimension: Ø 220 x 70 mm -Weight: 6.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 193 mm -Inside: Ø 80 mm -Hole circle: Ø 105 mm -Dimension: Ø 193 x 75 mm -Weight: 4.1 kg

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 210 mm -Inside: Ø 50 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 210 x 85 mm -Weight: 5 kg

Chuck flange, flange mount, lathe chuck flange, driver flange, intermediate flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 105 mm -Take: cone Ø 138 mm/short cone 8 -Dimension: Ø 280 x 35 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 280 mm -Inside: Ø 142 - 145 mm -Dimension: Ø 280 x 45 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Inside: Ø 65 mm -Recording: cone Ø 103 mm -Hole circle: Ø 133 mm -Hole circle: Ø 235/13 mm -Dimension: Ø 250 x 100 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 255 mm -Inside: Ø 62 mm -Admission: cone Ø 105 mm/short cone 6 -Hole circle: Ø 133 mm -Hole circle: Ø 199 mm/M16 -Dimension: Ø 255 x 90 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 300 mm -Inside: Ø 136 mm -Hole circle: Ø 170 mm -Dimension: Ø 300 x 100 mm -Weight: 14 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outside: Ø 400 mm -Inside: Ø 130 mm -Take: cone Ø 138 mm -Hole circle: Ø 170/260 mm -Dimension: Ø 400 x 90 mm -Weight: 26 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 380 mm -Inside: Ø 103 mm -Admission: cone Ø 135 mm -Hole circle: Ø 170 mm/M16 -Hole circle: Ø 335 mm/M24 -Dimension: Ø 380 x 105 mm -Weight: 37 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson -Type: Autolock -Recording: MK6 -Tensioning sleeve: Ø 31 mm -Dimension: Ø 76 x 290 mm -Weight: 5.7 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 220 mm -Inside diameter: 105 mm -Hole circle: Ø 133 mm -Dimension: Ø 220/78 mm -Weight: 6.1 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 252 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/M16 -Dimension: Ø 323/46 mm -Weight: 13 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chucks, four-jaw chucks, face plates -Outer diameter: 330 mm -Interior diameter: 100 mm -Short taper: size 6 (106.3 mm) -Rezess: O 252 mm -Hole circle: O 171 / O 18 mm -Dimension: O 330 / H35 mm -Weight: 16 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Inside diameter: 105 mm -Hole circle: Ø 133 mm/M12 -Dimension: Ø 210/H30 mm -Weight: 5 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 240 mm -Inside diameter: 103 mm -Hole circle: Ø 133 mm -Dimension: Ø 240/H160 mm -Weight: 7.6 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 210 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/185 mm -Dimension: Ø 210/90 mm -Weight: 6 kg

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 323 mm -Interior diameter: 80 mm -Short taper mount, cone size: 8 -Hole circle: Ø 170/288 mm -Dimension: Ø 323/H110 mm -Weight: 20 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm -Dimensions: 1300/400/H820 mm -Weight: 270 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Precision three-jaw chuck, chuck, face plate, 3-jaw chuck -Chuck size: Ø 192 mm -Beeks: individually and completely adjustable -Passage: Ø 51 mm -Weight: 14.5 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Quick-change chuck, quick-change holder, quick-change head, quick-change drill holder, quick-change insert -Take shaft: MK4 -Tool holder: MK4 -Dimensions: Ø 87/268 mm -Weight: 4.1 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Transfer: as is -Chuck size: Ø 200 mm -Hole circle: Ø 134 mm -Weight: 20.7 kg