independent chuck used for sale

4-jaw combination chuck, four-jaw chuck with individually and centrally adjustable jaws WMW, NILES DHK 315 x 4 ( DHK315x4 ) TGL 30-2333 < br />outer Ø: 315 mm centering Ø: 265 mm bolt circle Ø (chuck) : 290 mm bore Ø: 95 mm height with jaws: 160 mm including 2x chuck wrench jaws individually adjustable and rotatable used, tested ! dimensions ( lathe chuck ): 315 x 315 x 160 mm

Description: With special jaws for self-centering With operating instructions In original packaging Approx. Onsite Dimension. (l x w x h): 210 x 170 x 130 mm, weight approx.: 15 kg

Four-jaw chuck, four-jaw lathe chuck, precision four-jaw chuck, chuck, faceplate, 4-jaw chuck -Manufacturer: Röhm, Precision four-jaw chuck Ø 260 mm -Passage: Ø 70 mm -Bolt circle: Ø 105 mm -Recording: Short cone 5 -Jaws: individually and fully adjustable -Weight: 27.4 kg

Description: Four pieces , Diameter from 160 to 250 mm weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm

Description: Six pieces , Diameter from 190 to 315 mm weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 600 x 350 x 200 mm

Chuck flange, flange holder, lathe chuck flange, driving flange -Feed flange: Outside: Ø 190 mm -Mounting: thread, dimensions see photos -Dimensions: Ø 190 x 55 mm -Weight: 5.8 kg

Chuck flange, flange holder, lathe chuck flange, driving flange -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 220 mm -Bolt circle: Ø 134 mm -Hole: short taper 6, cone Ø 103 - 106 mm -Dimensions total Ø 220 x 190 mm -Weight: 20.1 kg

Description: Jaw chuck diameter: 380 mm Speed: 2500 rpm weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 400 x 400 x 250 mm

Description: Speed: max. 3200 rpm Jaw chuck diameter: 320 mm weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 310 x 310 x 160 mm

Description: Diameter 200 mm more details see photos Approx. Onsite Dimension. (l x w x h): 500 x 450 x 520 mm, weight approx.: 165 kg

Description: 35 pieces, quick-action chucks and tapping chucks, mainly BILZ Approx. Onsite Dimension. (l x w x h): 600 x 400 x 100 mm, weight approx.: 20 kg

Description: Rotary chucks, diameter fi 400mm, 3 pieces weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm

Description: 6x chisel holders v-groove for Quick Change Length: 130 mm Height 90 mm 1x drill chuck Holder: MK6 Approx. Onsite Dimension. (l x w x h): 300 x 300 x 100 mm, weight approx.: 20 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 100mm, 3500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 165 x 175 x 180 mm, weight approx.: 3 kg

Description: Collet Chuck Tool holder SK40-ER32-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 210 x 100 mm, weight approx.: 9 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 80mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 150 x 150 x 155 mm, weight approx.: 3 kg

Description: Collet Chuck Tool holder SK40-ER25-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 14 kg

Description: Collet Chuck Tool holder SK40-ER20-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 7 kg

Description: Collet Chuck Tool holder SK40-ER16-100. DIN69871, G2.5 25000 rpm. Mat: 20CrMnTi 0,003. Set 5 pcs The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 75 x 197 mm, weight approx.: 12 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 125 mm, 3000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 190 x 190 x 180 mm, weight approx.: 7 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 400 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 470 x 245 mm, weight approx.: 74 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 500 mm, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 570 x 600 x 280 mm, weight approx.: 124 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 320 mm, 1200 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 385 x 390 x 250 mm, weight approx.: 48 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 200 mm, 2000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 220 x 280 x 280 mm, weight approx.: 20 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 250 mm, 1600 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 320 x 320 x 210 mm, weight approx.: 20 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 160 mm, 2500 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 230 x 200 x 150 mm, weight approx.: 9 kg

Description: Chuck for self-centering lathe 3 + 3 jaws 125 mm, 3000 r/min, body in ground cast iron, closing with helical ring, concentric manual clamping, tempered jaws The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 190 x 190 x 180 mm, weight approx.: 7 kg

Description: Serial number: SQ,01,2181 Panel dimensions: 410 x 320 mm Incl. electric control panel Approx. Onsite Dimension. (l x w x h): 600 x 350 x 70 mm, weight approx.: 70 kg

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW outer Ø: 250 mm bolt circle Ø : 170 / 225 mm height: 160 mm bore: Ø 51 mm Jaws individually adjustable by toothing ! without baking !' used, tested ! Dimensions: 250 x 250 x 160 mm

Pull-down chuck, 3-jaw chuck, three-jaw chuck, power chuck SMW AUTOBLOK Type: 210 TS TSR-C 77196921 Outer Ø: 210 mm speed: max. 4500 rpm Bolt circle Ø : 130 mm Height: 145 mm (without tie rod) Bore: Ø 28 / 18 mm Flange diameter: Ø 170 / 202 mm used, tested ! Dimensions: 212 x 212 x 145 mm

Pull-down chuck, 3-jaw chuck, three-jaw chuck, power chuck HSW-SCHMID Type: 3214053 Outer Ø: 210 mm Speed: max. 4000 rpm Bolt circle Ø : 130 mm height: 170 mm (without tie rod) bore: Ø 25 mm flange diameter ( outer ): Ø 170 mm flange diameter ( inside ): Ø 105 / 100 mm, depth: 10 mm ( conical ) used, tested ! Dimensions: 218 x 210 x 210 mm

Pull-down chuck, 3-jaw chuck, three-jaw chuck, power chuck HSW-SCHMID Type: 3214053 Outer Ø: 210 mm Speed: max. 4000 rpm Bolt circle Ø : 130 mm height: 170 mm (without tie rod) bore: Ø 25 mm flange diameter ( outer ): Ø 170 mm flange diameter ( inside ): Ø 105 / 100 mm, depth: 10 mm ( conical ) used ! Dimensions: 315 x 210 x 210 mm

Description: various sizes and designs, 1 x serial number: 971105, 1 x serial number: 14900, 1st model: SCHUNK Microcentrik 6-40, 2nd model unknown Location: A-3242 Texing weight approx.: 15 kg, Approx. Onsite Dimension. (l x w x h): 600 x 600 x 500 mm

Description: in cardboard box Location: A-3242 Texing weight approx.: 15 kg, Approx. Onsite Dimension. (l x w x h): 600 x 600 x 500 mm

Description: Set of 4 lathe chucks comprising: 1 3-jaw chuck Ø 180 mm 3 3-jaw chucks Ø 160 mm Approx. Onsite Dimension. (l x w x h): 800 x 600 x 500 mm, weight approx.: 70 kg

Description: Rotary table 360 mm diameter with various centers Approx. Onsite Dimension. (l x w x h): 500 x 500 x 200 mm, weight approx.: 50 kg

Description: see pictures Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 150 kg

Description: Three pieces , Diameter 1 x 200 mm, 1 x 150 mm and 1 x 160 mm weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 500 x 400 x 100 mm

Description: 2 various chucks 1x 4-jaws Ø250 mm, bore Ø75 mm 1x 3-jaws Ø250 mm, bore Ø75 mm weight approx.: 50 Approx. Onsite kg, Approx. Onsite Dimension. (l x w x h): 500 x 300 x 200 mm

Description: 1x Ø125 mm 2x Ø160 mm weight approx.: 50 Approx. Onsite kg, Approx. Onsite Dimension. (l x w x h): 400 x 300 x 300 mm

weight approx.: 5 Approx. Onsite kg, Approx. Onsite Dimension. (l x w x h): 350 x 150 x 100 mm

number of spindles:8 spindle passage:130 mm Cam controlled multi spindle automatic lathe, used 8 main spindles Chucker AFH130 for complete machining means front- and back side Control Siemens Sinumerik 840DI complete revising and new configuration of this machine in year 2010. loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length control CNC compound slide in pos. 5 coolant pump with magnet candle filter tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo Irrtum und Zwischenverkauf vorbehalten Visiting under production condition possible Please, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

Gurutzpe Super A lathe. Distance between centers: 6.000mm. Swing: 1020mm. Swing in carriage: 745mm. Swing on gap: 1440mm. Spindle bore: 140mm. Speeds: 16 (9-500rpm). Equipped with 4 independent chuck and steady rest. Equipped with new universal chuck of 500mm. Equipped with new DRO Fagor. Equipped with new Multifix turret. Motorized carriage. CE protections and european certificate for second hand machines.

I will sell a universal lathe made by Korea, type Huichon-500 x 1500, year of manufacture, 1989, after renovation turning length in centers 1500 mm, turning diameter over bed 580 mm, turning diameter over slide 280 mm, accelerated slide feeds, spindle passage 76 mm, machine weight about 3200 kg, cooling system, lighting (24V lamp), Very stiff and accurate. The machine is after renovation, i.e. the bed, transverse slide, tool slide, clamp have been reground, turning parameters have been set (the accuracy of turning corresponds to a new machine), it has new bearings and replaced or regenerated worn elements. The lathe is fully operational. It is equipped with: hardened bed, new position readings, new chuck fi 250 / left and right jaws, independent chuck fi 400.

New Lambertini 4 jaw independent chuck 500 mm adaptation DIN 55027 - 11

Gurutzpe Super AT lathe. Distance between centers: 4000mm. Swing: 1020mm. Swing over carriage: 710mm. Swing in gap: 1320mm. Bore: 76,5mm. Motorized carriage. 4 independent jaws chuck. DRO Heidenhain.

turning diameter external: 4.300 turning length: 3.600 mm swing diameter over bed slide: 3.040 mm bar passage: 140 mm turning speed range: 0.18-92 U/min digital readout: HEIDENHAIN total power requirement: 56 kW weight of the machine ca.: 55 t dimensions of the machine ca.: 9.450 x 4.700 x 4.400 m New in 1976 / 2019 - 8 independent jaw chuck Ø2.500 mm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer / model RAVENSBURG P 30 New in 1976 / 2019 Swing Over Bed 3.040 mm. Swivel diameter in pocket 4.300 mm. Turning length 3.600 mm Turning length 140 mm. Speed Range 0.18-92 rpm. Speeds 36 4 axis digital readout system HEIDENHAIN 8 independent jaw chuck Ø2.500 mm. INCLUDED Max workpiece allowed 25.000 kg Equiped with tolos and jaws INCLUDED Total power 56 kW Machine weight 55.000 kg Machine dimensions (LxWxH) 9.450 x 4.700 x 4.400 mm.