independent chuck used for sale

4-jaw chuck, four-jaw chuck WMW, ROTO RECORD outer Ø: 310 mm bolt circle Ø: 290 mm bore Ø: 98 mm height with jaws: 130 mm used, tested ! Dimensions: 310 x 310 x 130 mm

3-jaw chuck, three-jaw chuck WMW, ROTO RECORD outer Ø: 375 mm bolt circle Ø: 235 mm bore Ø: 130 mm height with jaws: 192 mm (without screws) used, tested ! Dimensions: 375 x 375 x 267 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRD A-315x3 outer Ø: 315 mm bolt circle Ø : 270 mm height: 153 mm bore: Ø 82 mm used ! Dimensions: 320 x 320 x 190 mm

4-jaw combination chuck, four-jaw chuck with individually and centrally adjustable jaws WMW, ROTO RECORD Outer Ø: 310 mm outer Ø (chuck flange): 330 mm bolt circle Ø: 234 mm bore Ø: 105 mm height with jaws: 220 mm (without screws) used, tested ! Dimensions: 330 x 330 x 280 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Outer Ø: 250 mm bolt circle Ø : 132.5 mm height: 135 mm (without screws) bore: Ø 51 mm jaws individually adjustable by toothing ! used, checked ! without jaws ! Dimensions: 250 x 250 x 190 mm

Round tablewith 3 jaw chucks PAGUS diameter: Ø 130 mm hole diameter: Ø 28 mm height with jaws: 135 mm 360° rotatable used, tested ! Dimensions: 320 x 265 x 135 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck FORKARDT F 160 Outer Ø: 160 mm bolt circle: Ø 125 mm bore: 42 mm height with jaws: 116 mm with additional 2 interchangeable jaw sets and a basic jaw set ! used, tested ! Dimensions: 160 x 160 x 160 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck FORKARDT F 160 Outer Ø: 160 mm bolt circle: Ø 125 mm bore: 42 mm height with jaws: 135 mm with 3 additional interchangeable jaw sets ! used, tested ! Dimensions: 160 x 160 x 135 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge bar chuck FORKARDT F 160 outer Ø: 160 mm bolt circle: Ø 125 mm bore: 42 mm height with jaws: 150 mm with 3 additional interchangeable jaw sets ! used, tested ! Dimensions: 160 x 160 x 150 mm

2-jaw chuck, two-jaw chuck with round jaws ROTO RECORD outer Ø: 160 mm bolt circle diameter: Ø 170 mm Tension pulley diameter: Ø 60 mm bore: Ø 42 mm height with jaws: 95 mm used, tested ! Dimensions: 160 x 160 x 95 mm

Inclined chuck flange, chuck flange, intermediate flange for lathe chuck PAGUS outer Ø: 251 mm height: 56 / 40 mm bolt circle: Ø 170 mm short cone: Ø 138 / 134 mm x 14 mm suitable face plate see MMZ647 ! used, tested ! Dimensions: 251 x 251 x 56 mm

Quick action chuck WTE 11.297.40.13 3779303/013 SK 40 Tool: Ø 0.5 - 13 mm used, tested ! Dimensions: 154 x Ø 64 mm

Quick-action chuck PAGUS DIN 69871 AD/B SK 40 Tool: Ø 1 - 13 mm 15 Nm used, tested ! Dimensions: 159 x Ø 64 mm

diameter: 315 mm 3-jaws chuck without jaws. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick action chuck WTE 11.296.40.13 D38836 SK 40 Tool: Ø 0.5 - 13 mm used, tested ! Dimensions: 154 x Ø 64 mm

Short chuck HOLEX 301550 SK 40 - A tool: Ø 1 - 16 mm used balancing quality ( G ): 6.3 at 15000 rpm Cantilever length ( A-dimension ): 80 mm used, tested ! Dimensions: 150 x Ø 64 mm

Shrink chuck set, shrink chuck GARANT 302235 SK 40 Tool: Ø 3 / 4 / 5 / 6 / 7 / 8 / 10 / 12 mm Balancing quality ( G ): 2.5 at 25000 rpm cantilever length ( A-dimension ): 80 mm used, tested ! dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions (packed): 300 x 190 x 70 mm

Shrink chuck set, shrink chuck GARANT 302352 SK 40 Tool: Ø 3 / 4 / 6 / 8 mm Balancing quality ( G ): 2.5 at 25000 rpm Cantilever length ( A-dimension ): 80 mm used, tested ! dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions (packed): 250 x 170 x 70 mm

Shrink chuck set, shrink chuck GARANT 302356 SK 40 Tool: Ø 3 / 4 / 6 / 8 mm Balancing quality ( G ): 2.5 at 25000 rpm Cantilever length ( A-dimension ): 120 mm used, tested ! dimensions ( single shrink chuck ): 190 x Ø 64 mm Dimensions (packed): 250 x 200 x 70 mm

Shrink chuck set, shrink chuck GARANT 302325 SK 40 Tool: Ø 3 / 4 / / 5 / 6 / 8 mm Balancing quality ( G ): 2.5 at 25000 rpm Cantilever length ( A-dimension ): 120 mm used ! Dimensions ( single shrink chuck ): 190 x Ø 64 mm Dimensions ( packed ): 320 x 200 x 70 mm

Shrink chuck set, shrink chuck GARANT 302240 SK 40 tool: Ø 3 / 6 / 8 / 10 mm Cantilever length ( A-dimension ): 80 mm used, tested ! Dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions ( packed ): 250 x 150 x 70 mm

Surface chuck, 2 pieces HOLEX 302240 25 SK 40 - 25 - 100 SK 40 Tool: Ø 25 mm Balancing quality ( G ): 6,, 3 at 12000 rpm Cantilever length ( A-dimension ): 100 mm used, checked! 2 pieces ! Dimensions ( single wing chuck ): 170 x Ø 65 mm Dimensions ( packed ): 170 x 130 x 70 mm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm jaws individually adjustable by toothing used, checked ! Dimensions: 335 x 170 x 160 mm

2-jaw chuck, two-jaw chuck, power chuck, wedge hook chuck RÖHM KFD-160/2 outer Ø: 160 mm bolt circle Ø : 104.8 mm Flange Ø : 140 mm Jaws individually adjustable by toothing used, checked ! Dimensions: 220 x 165 x 160 mm

Shrink chuck set, shrink chuck GARANT 302325 SK 40 Tool: Ø 2x 3 / 4 / 5 / 8 mm 302235 SK 40 Tool: Ø 12 mm Balancing quality ( G ): 2,2,5 at 25000 rpm usable length: 120 mm used ! dimensions (single shrink chuck): 190 x Ø 64 mm Dimensions (packed): 320 x 200 x 70 mm

Shrink chuck set, shrink chuck GARANT 302235 SK 40 Tool: Ø 2x 3 / 4 / 5 12 mm Balancing quality ( G ): 2.5 at 25000 rpm usable length: 80 mm used, tested ! Dimensions ( single shrink chuck ): 150 x Ø 64 mm Dimensions ( packed ): 300 x 140 x 70 mm

Shrink chuck set, shrink chuck POKOLM 75 Ø 750 S SK 40 tool: Ø 6 / 8 / 10 / 12 /16 mm usable length: 75 mm used, tested ! Dimensions ( single shrink chuck ): 163 x Ø 64 mm Dimensions ( packed ): 330 x 210 x 70 mm

Shrink chuck set, shrink chuck POKOLM 50 Ø 750 S SK 40 Tool: Ø 3 / 4 / 6 / 8 / 10 / 12 / 16 mm Usable length: 50 mm used, tested Dimensions ( single shrink chuck ): 138 x Ø 64 mm Dimensions ( packed ): 300 x 280 x 70 mm

Shrink chuck set, shrink chuck GARANT 302332 SK 40 Tool: Ø 3 / 4 / 5 / 6 / 8 / 10 / 12 mm Balancing quality ( G ): 2.5 at 18000 rpm usable length: 100 mm used, tested ! Dimensions ( single shrink chuck ): 188 x Ø 64 mm Dimensions (packed): 360 x 280 x 70 mm

Shrink chuck set, shrink chuck HOLEX 302265 SK 40 Tool: Ø 8 / 10 / 12 mm Balancing quality ( G ): 2.5 at 18000 rpm effective length: 80 mm used, tested ! Dimensions ( single shrink chuck ): 148 x Ø 64 mm Dimensions ( packed ): 300 x 140 x 70 mm

Dividing head with three-jaw chuck, electro-hydraulic MAZAK AJV25/405 Three-jaw chuck Ø 315 mm hole diameter: Ø 100 mm, not continuous ! hole depth: 140 mm turntable: Ø 280 mm groove width: 14 / 24 mm groove depth: 20 mm center height 200 mm pitch 360 used, tested ! Dimensions 630 x 530 x 420 mm

Clamping device with 3-jaw chuck, three-jaw chuck RÖHM outer Ø: 250 mm height with jaws: 155 mm bore: Ø 75 mm used, tested ! Dimensions: 355 x 290 x 160 mm

Drive unit with pressure collet chuck RED BERG 940 400 22 315 / 630 rpm Collet chuck: 163E DIN 6343 Motor: KEB ZG0 KPR 71 G 4-2 ( ZG0KPR71G4-2 ) 0,55 / 0.7 kW 315 / 630 rpm 400 V 3AC Base plate: 300 x 240 x 18.5 mm hole spacing: 260 / 200 mm, hole diameter: 4xØ 13 mm / 1x Ø 18 mm groove: width: 18mm, depth: 7 mm used, tested ! Dimensions: 580 x 300 x 350 mm

3-jaw chuck, three-jaw chuck, lathe chuck WMW NILES outer Ø: 250 mm bore Ø:80 bolt circle: 180 mm flange: 220 mm height with jaws: 110 mm 2400 rpm with cross cone and camlock D1- 8 inch (stud M 16) 2 set of jaws (1x drill 1x rotary jaw set) 1 chuck wrench Dimensions: 250 x 250 x 195 mm

3-jaw chuck, three-jaw chuck, power chuck FORKARDT 3KTG 200 outer Ø: 200 mm bore: 80 mm Flange diameter: Ø 170 / 198 mm bolt circle 1: Ø 150 mm, 6x M10 x 1,5, Depth: 22 mm bolt circle 2: Ø 135 mm, 3x Ø 12.5 / 24 mm, depth: 42 mm height without jaws: 96 mm without jaws ! used, tested ! Dimensions: 200 x 200 x 96 mm

Shrink chuck, Shrink chuck KENNAMETAL HSK A100x25x115 HSK100ATT25115M Tool: Ø 25 mm Cantilever length ( A-dimension ): 115 mm Mounting: HSK - A100 New ! Dimensions ( shrink chuck ): 165 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 175 mm

ER collet chuck, collet chuck SANDVIK COROMANT 392.41014-100 32 100A collet: ER32 Working length: 87 mm mount: HSK - A100 New ! Dimensions ( collet chuck ): 145 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 150 mm

Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck RÖHM KFD-200/3HS 143888 outer diameter: Ø 200 mm Height without jaws: 110 mm Passage: Ø 66 mm Speed: max. 6500 rpm Flange diameter: Ø 200 / 170 mm bolt circle diameter: Ø 134 mm 3x screw M12 x 1.75 jaws individually adjustable by toothing ! with accessories ! New ! Dimensions ( lathe chuck ): 200 x 200 x 110 mm Dimensions ( packaging ): 230 x 230 x 240 mm

Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck KITAGAWA B-208 Outer diameter: Ø 210 mm Height without jaws: 105 mm Passage: Ø 52 mm Speed: max. 5000 rpm Flange diameter 1: Ø 170 mm Flange diameter 2: Ø 103 / 105,5 mm x 17 mm ( conical ) bolt circle diameter: Ø 134 mm 6x through bore: Ø 13.0 mm jaws individually adjustable by toothing ! with accessories ! New, with documents ! Dimensions ( lathe chuck ): 210 x 210 x 105 mm Dimensions ( packaging ): 290 x 250 x 240 mm

Base plate for lathe chuck ROTO RECORD DHK 315 bottle ( lathe chuck side ): Ø 265 mm bolt circle ( lathe chuck side ): Ø 290 mm, 3x bore: Ø 13.5 mm central bore: Ø 50 mm countersunk holes (machine side): Ø 19 mm, depth: 21 mm mounting holes: Ø 18 x 40 mm ( U-shape ), hole spacing: 330 mm used, tested ! Dimensions: 400 x 320 x 40 mm

3-jaw chuck, three-jaw chuck, lathe chuck, Wescott chuck WMW, NILES DHK 160 x 3 TGL30 2333 < br />outer Ø: 160 mm centering Ø: 130 mm bolt circle Ø (chuck) : 143 mm bore Ø: 42 mm height with jaws: 105 mm including chuck wrench and fastening screws jaws individually adjustable and rotatable New ! preserved ! Dimensions ( lathe chuck ): 160 x 160 x 105 mm Dimensions ( packaging ): 180 x 180 x 115 mm

3- Jaw chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm bolt circle: 175 mm Height with jaws: 125 mm feed number: 507 Dimensions: 200 x 200 x 125 mm

3-jaw chuck, three-jaw chuck ZTM outer Ø: 155 mm flange: 130 mm bolt circle: 143 mm bore Ø: 40 mm Height with jaws: 95 mm Total height: 95 mm Feed number: 16506 Jaw number: 16506 Complete with inner and outer jaws Dimensions: 155 x 155 x 95 mm

3- Jaw chuck, three-jaw chuck PAGUS Outer Ø: 200 mm Flange:155 mm bolt circle: 174 mm height with jaws: 100 mm bore: 55 mm Square for wrench: 11.5 mm Dimensions: 200 x 100 mm

3-jaw chuck, three-jaw chuck with outer jaw PAGUS outer Ø: 250 mm bore Ø: 80 mm flange: 111 mm bolt circle:134 mm height with jaws: 123 mm feed number: 72 295 jaw number: 12 295 short cone Dimensions: 250 x 250 x 123 mm 3 extra jaws

3-jaw chuck, three-jaw chuck ROTO RECORD DHAP 200 TGL 30 2334 outer Ø: 200 mm bolt circle Ø: 175 mm bore Ø: 54 mm height with jaws: 120 mm max. 3200 rpm split jaws ! Dimensions: 200 x 200 x 120 mm

3-jaw chuck, three-jaw chuck PAGUS Ø: 380 mm bolt circle Ø : 235 mm bore Ø : 108 mm height: 180 mm Was used on a Toyoda HES52 with many accessories ! used, checked ! Dimensions: 380 x 380 x 180 mm

3-jaw chuck, three-jaw chuck ROTO RECORD EF 250 Outer Ø: 250 mm bolt circle Ø : 225 mm bore: 80 mm height with jaws: 140 mm Clamping process via rotatable base plate ! with interchangeable jaws ! used, tested ! Dimensions: 250 x 250 x 140 mm

3-jaw chuck, three-jaw chuck PAGUS outer Ø: 475 mm bolt circle (flange) Ø: 172 mm bore Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 175 mm with second set of jaws ! used, tested ! Dimensions: 480 x 480 x 250 mm

Ref. -No.: 10055 Manufacturer: SCHUNK Storage location: Mülheim an der Ruhr Country of origin: Deutschland outer diameter: 250 mm Inside diameter: 80 mm