inc used for sale

General SKU222M099 LocationBarneveld Makeunknown (manufacturer tag is missing) Main Features Motor4 KW Length2900 mm Inlet diameter340 mm Specified Features - Vertical screw conveyor Vertical conveyor screw:Conveying with metering screw: Tube-modelcheck Diameterscrew 1= dia. 340mm, screw 2= dia. 150mm Lengthscrew 1= 2900mm, screw 2= 1350mm Between inlet and outlet± 2200mm Shaft diameterscrew 1= 90 mm, screw 2= 40 mm Pitchscrew 1= 190 mm, screw 2=135 mm Inletdia. 210mm Outletdia. 320mm Motor4,0 kW, 220/380 V + 0,75 kW, 400 V Outlet height530 mm Conveying height600 mm MaterialStainless steel 1.4301 (304) General Year of constructionunknown Floorspace4,0x0,5 m Total height1,6 m Weight480 kgGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberVertical screw conveyorsBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fille ...

VTT Sand Trap, VTT sand traps optimize your pumping system during well dewatering projects. They capture and separate sand carried along with the groundwater, while simultaneously acting as an air vent for accurate water measurements., , Applications:, , Well dewatering, Horizontal drainage, Construction pit dewatering, Water measurements, pH-neutral water 0 - 45 °C, , Water meter option, The VTT sand trap is prepared as standard for the installation of a 4-inch Handy water meter. This integrated preparation ensures simple and reliable water measurement within your dewatering system., , Max dirt passage: 100 mm, , = More information =, , Year of manufacture: 2026, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer informa ...

General SKU051G200 MakeWerkhuizen Schepens N.V. Dendermonde TypeMixing drum No.70-776-397 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor11 KW Inlet diameter1200 mm Specified Features - Miscellaneous mixer Coating installation:Continuous drum coater: (1x) Pan diameter1200mm Cylindrical width6000mm, Adjustable inclination In-/OutletInlet 340x340mm, Outlet 400x600mm Motor11,0 kW, 380-415/660-720 Volt With spraying arm(nozzles are not included) Miscellaneous mixers MaterialStainless steel 1.4306 (304L) General LocationBarneveld With switchgear(as is) Floorspace9,0x2,6 m Total height2,1 m Weight8500 kg Extra information Extra SpecificationsMixing drum. non perforated with spray bar arm Generic medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersMis ...

MARIANA SHRINK TRM700 SERIES INCLDUING LF AND LFT VARIANTS YEAR 2020 Item #: Usm-251 Category Others Technical Specifications – TRM-700 Series Designed For 1000ml Tetra Edge Packs Production Capacity Up to 60 cycles per minute Product Size Range: Minimum Size: 60 × 120 × 60 mm (L × W × H) Maximum Size: 320 × 460 × 370 mm (L × W × H) Film Specifications: Film Type: LDPE (Polyethylene) Film Thickness: 30 – 90 µm Reel Width: 225 – 575 mm

Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 1600 MT Built: 1996 Billet dia.: 6”, 157 x 560 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 110 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 75 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

Qty. 1 Second-hand extrusion pres line – in storage Mfc.: Tuerkish Co., Rexroth, Siemens Force: 900 MT Built: 2007 Billet dia.: 5”, 127 x 390 mm Main Cylinder Dia.: Ø395 mm PLC: Siemens, S7 – 1500 Press presusre: 315 bar Hydraulic System: Rexroth Main Press Motor: 90 kW – 1,400 rpm Main Pump: Rexroth A4VSO 125 Auxiliary Pump Motor: 7 kW – 1,400 rpm Auxiliary Pump: Rexroth A2F016 Container Pump: 5.5 kW – 1,400 rpm – Rexroth A2F016

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

Memmert B60 Incubator For sale is a used B60 incubator from the manufacturer Memmert. Technical details: Manufacturer: Memmert Model No.: B60 Design: Incubator / Incubator / Heating Oven Temperature range: approx. +10 °C above room temperature up to 70 °C Power: approx. 2000 W (220 V / 50-60 Hz) Application: Laboratory, Research, Industry, Medicine Condition: Used, functional Buy Memmert B60 incubators and other items at low prices – Here you can buy goods from professionals for professionals – In our SHOP you will find more attractive offers.

Incubator/incubator Manufacturer: Binder Nominal temperature up to 100 °C

Incubator from Heraeus Type: B 5090 E Rated temperature: 70C 2-door glazed Dimensions: length x width x height: approx. 119 x 71 x 75 cm Weight: approx. 70 kg

Hilge pressure boost pump Mint from spare parts inventory for example, for CIP systems Motor NMG 160 MB242FF300D1 380-415 V 50 Hz 15 KW Q = 22, 5 m m³ / h H = 110 m n = 2900 / min

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Simatic S7-1500, inkl. Memory card, 6ES7 515-2UM01-0AB0, Siemens, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Simatic S7-1500, 6ES7 515-2UM01-0AB0, Siemens, - incl. wall bracket - incl. Simatic S7 memory card, 256Mb, 6ES7954-8LL03-0AA0, Siemens, new price € 397 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions  ...

Piston, including connecting rod Part number: 110300 / 1101000

Technical data: Roll width: 1200 mm Length: 27 m Roll diameter: 168 mm Roller spacing: 800 mm Cut-outs: 5 PCs. Switching flag: 1 PCs. Power: 4,0 KW With built-in honing cross conveyor: Distance: 2.99 m Line number: 5 line Drive 2,2 KW

Double side labeler incl. round labelling function, built in year of 2019, capacity approx. 30-35 cycles / min. Label length 20-300 mm / label height 160 mm / container diameter 20-110 mm The price is EURO 24.500,--.

Incubator with control up to approx. 80°C with approx. internal masses 400 x 500 x 350

Incremental length measuring device + certificate, LS106, ML740mm, Heidenhain, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Incremental encapsulated length measuring device with large-profile scale housing, LS106, measuring length 740mm, Incl. quality test certificate Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return th ...

Pipe screw conveyor screw inclined conveyor without motor used Our own special machine construction can also be made. Pipe diameter approx. 260 mm Pipe length approx. 4780 mm Screw coil length approx. 4200 mm Inlet/outlet-diameter approx. 250 mm Screw tube top open with lid Price without engine We adapt the engine to their use at an additional cost. Ideal snail for wood chips or similar wood chips. Total approx. 5050 x 1000 x 600 mm 2 pieces available

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

Fuel canister 20l incl. spout Content 20 l Width 165 mm Length 345 mm Height 470 mm Material: sheet steel Weight 4.3kg Colour: Traffic red RAL3000 or zinc yellow RAL1018 - Incl. spout - With lever lock and safety device - Suitable for all types of fuel - Painted inside and outside to be fuel-resistant - TÜV tested Negotiation price: € 19,- net from stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)

Material conveyor belt LT-400 | Inclined conveyor belt for waste loading and material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 400 mm Working length: 3000 mm Working speed: 15 m/min. Maximum head: 1950 mm Gearbox: Bonfiglioli 0,55 kWt Weight: 250 kg

Techne HB-1D Hybridiser Hybridization Oven/Incubator This economical high-performance hybridization furnace is compact and easy to use. It's for the immobilization of DNA, RNA and proteins on Nylon or nitrocellulose membranes. The incubator holds up to six hybridization tubes with at least five 20x20 cm membranes/tubes. A clear liquid crystal temperature display and glass door allow for accurate data observation. The warm-up time is 50 minutes (from 16 to 65 °C) with over-temperature shutdown. The device has a digital temperature control and a PRT temperature sensor. • Compact, easy to use and offers complete protection against hybridization hazards • A temperature range of 10 °C above ambient to 100 °C • High capacity that can hold up to 24 mini tubes or 6 unique large tubes • Hybridizations can be performed with a minimum volume of 5 ml probe • Adjust ...

Material conveyor belt LT-500 | Inclined conveyor belt for material feeding for granulators and other applications. Movable, very stable design, height-adjustable at the outlet. Working width: 500 mm Working length: 4000 mm Working speed: 15 m/min. Maximum head: 2200 mm Gearbox: Bonfiglioli 0,75 kWt Weight: 320 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg

Sprocket, sprockets, single sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1 x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available -Price: per piece -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 230 V -Dimensions: 1200/560/H1250 mm -Weight: 133 kg

Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 V -Mechanics for: cutting jaws missing -Dimensions: 1100/700/H1130 mm -Weight: 132 kg

Tapping machine, pipe thread cutter -for pipe size: max. 2 inches -with: cutting jaws -Speed: rpm -Foot switch with emergency stop function Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1200/660/H1250 mm -Weight: 166 kg

Included in delivery: 01x End-of-line increase, new Execution: Universal Material colour: RAL 5010 Gentian blue Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile abm.: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pcs.

Transnorm Rising falling Incline belt conveyor GF 7200-600-500 RA2053 Technical data: Conveyor length (NL): 7200 mm (3800 mm + 3400 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1998 condition: good (used) Conveying length in mm: 7200 Nominal / outsid ...

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

Included in delivery: 01x End-of-line increase, new Execution: Universal Material colour: RAL. 1003 Signal yellow Total height: 700 mm Useful height: 500 mm Telescopic: 600 - 1,150 mm depth Frame profile abm.: 45 x 45 mm angle Hole grid: 6 x 25 mm Hole diameter: 30 x 10 mm Weight: 6 kg / pcs.

Lippert Rising falling Incline belt conveyor GF 7000-900-800 RA2055 Technical data: Conveyor length (NL): 7000 mm (4960 mm + 700 mm + 1340 mm) frame width (NB): 900 mm belt width (GuB): 800 mm Overall height (BH): 120 mm, 430 mm with motor Angle: about 15° ( 2 x 7,5° ) Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 7000 Nominal / outside width in mm: 900 Belt width in mm: 800 Driven: YES Engine ...

Thread cutting machine, pipe thread cutter, thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter -for: Pipe size: max. 2 inches -Cutting jaws: 1/2-2 inch -Operating voltage: 240 volts -Dimensions: 1000/600/H1114 mm -Weight: 80 kg

approx. 2 pieces Transnorm inschleuser / inclined belt conveyor - used - : Price per piece: 950.-€ (net), dismantled and loaded! Manufacturer: Transnorm Year of construction: 2010 Type: 6200-00 Nominal briete / belt width: 800mm SEW Motor Condition: good Available: as of now Location: Frankenberg Sachsen warehouse These are the two lower parts on the pallet – unfortunately there are currently no better photos.

Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 2 inch -5x Cutting tips: 3/4 1 1 1/4 1 1/2 2 inch -2x Threaded ratchets: Type 111-R/12-R -Price/Sale: complete -Weight: 12.8 kg

Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 1 1/4 inch -4x cutting tips: 1/2 3/4 1 1 1/4 inch -Number: 1 set available - Price: per set -Dimensions: -Weight: 6.6 kg

Roller chain, drive chain -per chain length: 1.25 m -20B-1 roller chain -Number: 17x chains available -per chain length: 1.25 m -Price: 30 Eur/m -Weight: 4.6 kg

Machine condition: cleaned and tested Year of construction: 2013 Main motor incl. Mentor control suitable for KBA RA 106 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Transnorm rising falling Incline belt conveyor GF 6000-600-500 RA2066 Technical data: Conveyor length (NL): 6000 mm (4200 mm + 1800 mm) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,33 Drive: SEW gear motor, R27 DT80N4/BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2001 condition: good (used) Conveying length in mm: 6000 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engin ...

Threading machine, pipe thread cutter, thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter -for pipe size: max. 2 inches -Cutting jaws: 1/2-2 inches -Operating voltage: 380 volts -Weight: 100 kg

Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 3/4 inches -5x cutting tips: 1/8, 1/4, 3/8, 1/2, 3/4 -Number: 1x sets available -Price: per set -Dimensions: 645/100/H70 mm -Weight: 5 kg

Transnorm Rising falling Incline belt conveyor GF 9820-700-600 RA2087 Technical data: Conveyor length (NL): 9820 mm (6000 mm riser segment + 3820 mm forerun) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 9820 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eu ...

Transnorm Rising falling Incline with arch belt conveyor GF 5140-600-500 RA2082 Technical data: Conveyor length (NL): 5140 mm (4640 mm incline + 500 mm arch) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): please contact us Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5140 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentr ...

Cutting Clamp Kit, Hand Pipe Thread Cutter, Tapping Machine, Pipe Thread Cutter, Pipe Thread Cutter, Cutting Head -for pipe size: max. 1 1/4 inches -Cutting tips: 7 -Transport case -Weight: 9.8 kg