135,929 used machines on RESALE, but how to find them? Machine Search
Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used
Manufacturer: General Inspection (Gi) Model / Machine Type: DT-100 Date of Manufacture: 10/2018 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308
Interroll Rising falling Incline belt conveyor with leading belt GF 4778 (3888+890)-690-580 RA2365 Technical data: Conveyor length (NL): 4778 mm ( 3888 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4778 (3888+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type: ...
Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366 Technical data: Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 7028 ( 6138 + 890 ) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine ty ...
Interroll Rising falling Incline belt conveyor with leading belt GF 19782 (810+175+17907+890)-690-580 RA2363 Technical data: Conveyor length (NL): 19782 mm ( 810 + 175 mm arch + 17907 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 19782 ( 810 + 175 + 17907 + 890 ) Nominal / outside wi ...
Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...
CLAMPING FORCE: 150TON PLATEN SIZES: 1295 X 990 DBTB: ROTARY TABLE 1520 MIN MOULD HEIGHT: 300 MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 700MM SCREW DIAMETER: 40MM INJECTION PRESSURE: 2678BAR STROKE VOLUME: 283CM3 SHOT WEIGHT (P/S): 257GR CONTROLS: UNILOG B6 MOTOR: 22KW HEATING CAPACITY: 12.1KW SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 1 HOT RUNNER: 8 ZONE INTERGRATED ADDITIONAL: HORIZONAL INJECTION VERTICAL CLAMP
A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.
Injector Model: BI 204 C Manufacturer: Inject star Stainless steel Power: 9kW Voltage: 3 x 400V/ 50Hz
Manufacturer: NanoFocus Model: Usprint 3D Inspection System with Bauman Year of Manufacture: 2014 Condition : Excellent Control Operation Voltage: 24 / 400 V Nominal Current: 17.3 A Electricity Type: 3-phase Frequency: 50 Hz Compressed Air: 6 bar Supply Line Fuse: 25 A (slow-blow), 16 A (fast-acting) Nominal Power: 4.6 kW CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines
Indramat Indramat DDS02.1 - W150 - DA01 - 01 - FW
Costarelli inclined Conveyor Belt, Sturdy and reliable construction, Dimensions 5.300 x 950 mm, adjustable height (now loading 500 - discharging 1.600 mm), 1,5 kw motor, PVC carpet with drive lugs, 800 mm pitch, 200 mm roller diameter, 650 mm sidewall height, Constructed in 2001, very good working conditions, working width: 950 mm wide x 5,3 mt.long, conditions: used, checked, type: inclined
Indramat Indramat 093B-0GS-3-C/110-B-0/S001
Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000
Height 1920 mm Width 650 mm Length 1750 mm Electrical Supply: 400V 50Hz 3N Total power 4 kW Main Material Stainless Steel, Acid Resistant Number of needles 60 pcs. Number of heads Single head Needle diameter 3 mm Working belt width 345 mm Belt feed adjustment Yes Injection pressure adjustment Yes Tape type made of plastic
This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.
Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - .ucymachines/ Contact us at - sales@ucymachines
Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.
Indramat Indramat DDS02.1-W150-DA01-01-FW
An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.
4x Muller Martini Grapha Progress printing cassettes 25", pitch 1/3 with perforating cilinder. In very good condition available immediately.
CS 2500-KF PLUS – Industrial Roasters for Nuts, Seeds & Snacks, The robust Ceselsan CS 2500-KF PLUS is a versatile continuous rojust furnace for the industrial processing of nuts, kernels, seeds, dried fruits and snack products. The system offers uniform heat distribution over multiple zones and enables precise control of temperature, product thickness and belt speed – ideal for reproducible product quality., Bandwidth: approx. 860mm, Insertion funnel width: approx.: 860x600 mm, With dragger kettle for salting or seasoning the products to be roasted Type TZM 150 (150 liters). This doses the products in the roaster after mixing., Diameter of the filling opening: about 600 mm,, Only about 30 operating hours., Information from the operating manual of the machine:, Technical specifications, - Dimensions: 3.636 × 1.946 × 2.000 mm, - gas heated, - Electrical consumption:, - Installed pow ...
Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: efector, Inductive sensor proximity switch, unused, original packaging -Product Type: IN-3004-BPKG / IN5129 -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 150/125/H30 mm -Weight: 0.1 kg/carton
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutters: indexable insert end mills with internal cooling, 8 pieces -Receptacle: Ø 32 mm -Diameter: 32 to 43 mm, see photos / parts list -Levy/Price: complete -Transport dimensions: 400/200/H60 mm -Weight: 8.7kg
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Handover: in current condition as seen -Reversible plate: 1 piece missing -Finger milling cutter: indexable insert end mill with internal cooling -Receptacle: Ø 30 mm -Diameter: 16mm -Dimension: 133/40/H40 mm -Weight: 0.4kg
Digital input module 16x24V DC 3ms PS416-INP-400 -Supply voltage: DC 24 ... 24V -Supply voltage type: DC -Number of digital inputs: 16 -Number of digital outputs: 0 -Input current with signal: 1 8.6mA -Permissible input voltage: -3 ... 30.2V -Type of input voltage: DC -Type of digital output: none -Maximum permissible voltage at the output: 0V -Electrical connection type: Plug connector -Delay time during signal change: 3 ... 3ms Explosion protection category: PS416-INP-400 -Weight: 0.2 kg
Ref. no.: 18597 Manufacturer: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced an ...
Key data: 500 kN
Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of Make: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Control with hot runners Hardened injection unit - Bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...
Key data: 1000 kN
Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request
This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Technical data Capacity: Adjustable For the inspection of damage empty crates
This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, its ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information.
Complete packing line for liquid/gel products in sticks, comprising: Inever PH6/8 - 8 lane stick pack machine with 8 rotary piston pumps, currently set up for sticks of 23mm width and max. 160mm length, with filling volume of 10 – 14 ml, with adequate format parts, sticks of 17 to 35 mm width can be processed, reel diameter 600mm, reel width 640mm, fitted with Allen Coding device, electrics 400V/3Ph/50/ 60Hz, power consumption 10kW, required air pressure 6 bar, machine floor space approx. 2200 x 2100mm (WxD), machine height approx. 3100 mm, machine net weight approx. 2850 kg. Enflex ENF11 horizontal intermittent-motion cartoning machine, carton size from 50 x 50 x 15mm to 125 x 180 x 40mm (or 125 x 140 x 60m). Includes pre-folded leaflet inserter, Nordson ProBlue hot-melt unit for glue closure of the carton flaps, output up to 60 cartons per minute, electrics 400V/3Ph/50 Hz, power co ...
Overview This fill level and closure inspection machine was manufactured in 2010 by German company KHS. The operation view will be done with the label inspection machine from Indspect. It is designed for checking the fill height, closure and label of full bottles. The machine was running until January 2025 and is now stored in the company. Technical data Capacity: up to 25,000 bph Scope of Delivery Fill level and closure inspection system | KHS Label inspection system | Indspect
Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)
Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and acce ...
Used HEUFT empty bottle inspector 72000 BPHTechnical Specifications & Performance DataThis Empty Bottle Inspector (EBI) is engineered for high-speed beverage production and industrial packaging environments. Manufactured by HEUFT, the system combines a HEUFT InLine reflexx Release 9 inspector with a HEUFT Spectrum SX TB 72 pre-selection unit, networked for complete bottle flow control. Designed for integration in a used bottling line, it offers robust inspection performance for returnable glass bottles at line speeds up to 72,000 bottles per hour.Manufacturer: HEUFTPrimary model: InLine reflexx Release 9Pre-selection unit: Spectrum SX TB 72 (with Gateway II network interface)Additional platform reference: Spectrum TXYear of manufacture: 2009Maximum capacity: 72,000 bottles/hourBottle formats: Compatible with 0.33L and 0.5L bottle formatsContainers: Designed for Glass bottle handling (gre ...
Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a thre ...
Used Case Divider Inserter APE year 1998 Introduction In the world of bottling, every detail matters. Moreover, the efficiency and reliability of the APE Case Divider Inserter can make the difference between a smooth production line and additional costs due to unforeseen interruptions. The APE 2001 Model: A Pillar of Reliability This machine has been a benchmark in the bottling industry since its launch in 1998. This model is designed to accurately and swiftly insert dividers into 6 and 12-bottle cartons, ensuring efficient and uninterrupted production flow. Key Technical Features The robust design of the APE Case Divider Inserter and its advanced technology ensures consistent performance even in high-production environments. Additionally, the divider insertion system has been optimized to guarantee precise and uniform positioning, minimizing waste and enhancing packaging quality. Operat ...
Overview This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...
End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: using band-stop, Total length: 1,800mm, Bandwidth: 420 mm, Scan width: 400 mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Basic machine equipment, a) General machine data, • Industry scanner made of stainless steel with open profile, • Power supply connection:, o 110-230VAC / 50/60Hz / 1Ph I o approx. 2.2 kVA I o ap ...
Description Item # 9231 - CROISSANT/ CAKE INJECTION FILLING MACHINE Manufactured by GORRERI Model SVG800 - 800mm working width For fillings such as: creams, jams, fruit jelly Two sets of needles : for big croissants/cakes: for mini croissants/cakes Year 2007 (used in production for 2 1/2 years and then held as a back-up machine) Production capacity: 20 cycles/min Weight: 750 kg Power: 7.5 kW Feeding tension: 380 V (3Ph+T+N) Auxiliary tension: 24 V DC Frequency: 50 Hz Working pressure: 6 bar
This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.
Te koop: Industriële Doseerkast Bevat: 1x Intertec SL minitherm DFA T3 BI 1x MSA ultima XE A-ULTX-SENS-59-4-0 1x Raychem JBU-100-L-E 1x Rose PTB 00 ATEX 1002 3x Krohne PTB 03 ATEX D127X 1x Genie 123 Supreme membrane seperator Aantal: 1 Order number: 000.1 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21% btw Voor internationale verzending: prijs aanvragen
Stepper motor with gearbox for mikrocutter INOTEC I175 - NEW Article No. : 9078429, 30026139, I175-400767 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60
Description: see pictures and type plates Type 1900 Operating overpressure 6bar Content 1720l Flow temperature 100°C Heat output 1400KW
Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany
maximum number of results exceeded
please refine your search
