135,696 used machines on RESALE, but how to find them? Machine Search
Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items ; new
General SKUR0380 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 400 Volt With jacketcheck Fine Impact Mills MaterialMild steel General No.141724 Year of construction1970 Floorspace1,1x0,9 M Total height1,1 M Weight1020 KgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicAlpineIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries ...
General SKUR0378 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm With jacketcheck Fine Impact Mills MaterialMild steel General No.135101 Year of construction1966 Floorspace1,0x0,9 M Total height1,1 M Weight600 kgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicAlpineIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdere ...
General SKU227S107 MakeHosokawa Alpine (D) TypeLGM 20 ( Long Gap Mill ) No.P1172095 Year of construction2009 LocationBarneveld Main Features Motor500 KW Specified Features - Fine Impact Mill Grindercheck Rotor sizeDia. 1950x800 mm Grinding room sizeDia. 2000x760 mm With hoppercheck InletScrew (Schneckenbau Prestel) (2x dia. 125mm) Motor500 kW 400 Volt Speed1100 rpm Fine Impact Mills MaterialMild steel General Floorspace4,9x2,4 m Total height3,0 m Weight22000 kg CEcheck ATEX designedcheck Extra Specificationsincluding Reitz fan type KXE 160-063030-00 (2009) 630 m3/h 2980 rpm 200 kW 400/690 voltsincluding cyclone and heating unit with burner monitoring (as is )Consumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarA ...
General SKU316X529 LocationBarneveld Main Features Motor30 KW Inlet diameter170 mm Width550 mm Specified Features - Fine Impact Mill Grindercheck Rotor size530 mm (4 rotors stacked) Grinding room sizeDia 540 mm x 700 mm With grinding platenscheck With hopper250x250x240 mm InletDia. 170 mm Feeding with vibro feedercheck Motor30 kW, 400/690 volt, 1465 rpm Speed2500 rpm Fine Impact Mills MaterialMild steel, Stainless steel General MakeJäckering TypeUnknown Year of constructionUnknown Mounted on framecheck With switchcheck Floor space2,10 x 0,80 m Total height1,70 m Weight1800 kg Extra Specifications- With screw conveyor, 0,37 kW, 230/380 volt, 695 rpm- estimated output 150 kg/h: water evaporation ± 60 kg/hConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.Co ...
General SKU337X769 LocationBarneveld Main Features Motor18.5 KW Width375 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 375x100 mm Grinding room size750x75 mm With sieve cagecheck Inlet170x110 mm Feeding with rotating valvecheck Motor18,5kW, 400/690V, 2955rpm (EX) Speed+- 1350rpm Fine Impact Mills MaterialMild steel, Stainless steel 1.4552 General MakeKek kemutec Year of constructionunknown Mounted on framecheck Floor space2,2x0,7 m Total height1,65 m Weight850 kg Extra SpecificationsThe housing is made of steel, the rotor is made of stainless steel.with:- dinnissen diverter valve.inlet: 170x110.outlet:170x110 and Dia 75mm- additional parts.Consumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additives ...
General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm With jacketcheck Fine Impact Mills MaterialMild steel General No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicAlpineIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdere ...
General SKU379X941 LocationBarneveld CEcheck MakeIntron Main Features MaterialMild steel Motor0.05 KW Specified Features - Miscellaneous Motor0,05 kW, 115/230 volt MaterialMild steel With jacketcheck General TypeCeast 9050 Mach.No.9050B18055 Year of construction2019 Floor space1,0 x 0,45 m Total height0,95 m Weight220 kg Extra SpecificationsImpact Energy Range: 0.5 J to 50 J (0.37 – 36.9 ft-lb).Display &:amp: Control: Integrated touch panel with embedded PC for test control and results. (as is)&:nbsp:MiscellaneousOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsRubberBiotechnologySpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal ...
General SKU245P306 LocationBarneveld MakeHosokawa Alpine Type160 UPZ No.6667 Main Features Motor6 KW Inlet diameter160 mm Specified Features - Fine Impact Mill Grinder:plate beater: Rotor sizedia.160mm Moving hammerscheck With grinding trackcheck Feeding with rotating valvecheck Motor4,9/6 KW, 380 Volt Fine Impact Mills MaterialStainless steel General Year of construction1995 Extra SpecificationsComplete size reduction system including Rotary valve Typ 150 V2A, K-Tron Soder S200 dosing screw, dust filter and AERON filterConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicHosokawa AlpineIndu ...
General SKU364X863 MakeHosokawa Alpine Type500 UPZ No.P1 187094 Year of construction2011 Main Features Motor37 KW Inlet diameter150 mm Specified Features - Fine Impact Mill Grindercheck With sieve cagecheck Housing dimensions ø 1000 mm With hopper(for a milled product) Inletø 150 mm Motor37 kW (400 V, 2960 rpm) With variable speed drivecheck Speed820—4100 rpm Fine Impact Mills MaterialStainless steel 1.4541 (321) General Mounted on framecheck LocationBarneveld With switch(as is) With control cabinet(as is) Floor space1,35 x 0,95 m Total height1,0 m Weight960 kg Extra SpecificationsWith: dust filter blower: density 1.17 kg/m³: 45 m³/min: speed: 3000 rpm hopper with gear motor: 0.2 kW, 2730 rpmFor the UPZ 500 we have the following additional items on stock AZO Coolable screw conveyor — SKU: 364X866 DMN Machinefabriek – Rotating valve — SKU: 364X914C ...
General SKU312X490 MakeGörgens Mahltechnik GmbH Dormagen TypeG-130 No.247 Year of construction2001 Main Features Motor110 KW Width1000 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeø 1300 x 680 mm Grinding room sizeø 1580 x 1000 mm Inlet1000 x 150 mm Motor110 kW 400 V Speed1100—1700 rpm Fine Impact Mills MaterialStainless steel 1.4301 (304) General LocationBarneveld With control cabinet(as is) Floor space2,68 x 1,84 m Total height2,08 m CEcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicGörgens Mahltechnik GmbH DormagenIndustries > Recycling > Consumer ...
General SKU160P705 MakePallmann TypePP 4 No.0668145 Year of construction1968 LocationBarneveld Main Features Motor22.5 KW Inlet diameter155 mm Width100 mm Specified Features - Fine Impact Mill Turbo cone millcheck 2 Driven rotorsimpeller &: co-rotating baffle plate Rotor sizeInner roter ø 396 mm: Outer roter 400 mm Grinding room sizeø 600 Inlet155 x 100 mm Motor15 kW + 7,5 kW, 380 V SpeedMax. 4100 rpm: Grinding disc 1450 rpm Fine Impact Mills MaterialMild steel General With switchgear(as is) Floorspace2,1 x 1,1 m Total height0,8 mConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inor ...
Die Sinking Machine AGIE AGIETRON IMPACT 3 - C axis, automatic electrode change, Erowa, Information about technical data are not binding., Machine available subject to prior sale., Longitudinal travel x axis: 500 mm, Cross travel y axis: 350 mm, Vertical travel z axis: 500 mm, C axis travel: 360 °, Working table size: 800x600 mm, Work tank dimension: 1100x730x400 mm, Automatic electrode change nr.: 28, Power supply: AGIEVISION 2, Max working current: 72 A, Filter type: Cartridge paper, Weight: 3.600 Kg, Accessories: EROWA Sistem
General SKU041Z170 MakeForplex Chateaubriant TypeFL-4 No.562 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt With jacketcheck Fine Impact Mills MaterialMild steel General Floorspace1,2x1,3 M Total height1,5 M Weight1900 KGConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicForplexIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed ...
General SKU041Z171 MakeForplex Chateaubriant TypeFL-4 No.561 Year of constructionunknown LocationBarneveld Main Features Motor75 KW Inlet diameter650 mm Specified Features - Fine Impact Mill Grinder(1x) Rotor sizedia. 650mm With grinding trackdia. 665mm With hoppercheck Inlet320x300mm Motor75,0 KW, 400 Volt With jacketcheck Fine Impact Mills MaterialMild steel General Floorspacemill 1,2x1,3 M Total height1,5 M Weight1900 KGConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDiscountDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicForplexIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & ...
General SKU253M221 LocationBarneveld MakeBauermeister &: Co. Norderstedt TypeUT-63 Main Features Motor185 KW Inlet diameter1200 mm Width400 mm Specified Features - Fine Impact Mill Turbo millcheck Rotor sizeDia. 1200x400mm Grinding room sizeDia. 1200x400mm With sieve cage(Pore size ø 220 µm) With grinding trackcheck Housing dimensions 2000x0,55x1800 mm InletDia. 400 mm Motor185,0 KW, 415 Volt Fine Impact Mills MaterialMild steel, Stainless steel 1.4462 (Duplex2205) General No.940785 Year of construction1989 Mounted on framecheck Floor space3,9x1,5 m Total height3,0 m Weight8500 kg Extra Specifications-- RECONDITIONED --Consumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchReconditionedAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesDetergent & surf.CosmeticsOrganicsE-waste & metalFood additivesSugarAnimal feedFine Impact M ...
General SKULY008 CEcheck Main Features Motor110 KW Specified Features - Fine Impact Mill Pin disc millcheck 2 Driven rotorscheck Rotor sizeø 630 mm Number of pins on house side:148 / 89 (2 pin rows) Number of pins on door side:228 / 137 (3 pin rows) Pin diameter10 mm (head ø 17 mm), length 75 mm Without sieve cage(screening by external Allgaier tumbler screen) Feeding with rotating valvecheck Motor2x 55 kW With variable speed drivecheck Speedhousing side: 700–3,550 rpm: door side: 700–3,150 rpm Fine Impact Mills MaterialStainless steel 1.4404 (316L), Stainless steel 1.4541 (321) General MakeHosokawa Alpine SerialN1 226486 / 1000 TypeContraplex 630 C — high-speed pin (pin-disc) mill, cold-milling capable, pressure-shock resistant 0.5 bar(g) Year of construction2016 Mounted on framecheck With control cabinetcheck With switchgearcheck Floor space2,24 x 1, ...
table length: 600 mm table width: 580 mm 0: 650 x 580 x 250 mm weight: 400 kg c-axis: 0 Number of revolutions: 60 rpm type of pallet-changer: WEC tool changer made by:: WEC accessories:: Diverses weight of the machine ca.: 4 t dimensions of the machine ca.: 350 x 285 x 280 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Unused in the original packaging • Rated voltage: 21 V • Brushless motor • Maximum torque: 550 Nm ± 5% • 2 × 1.5 Ah battery • 2 positions (2 MOS, 5C) (this indication is a bit unclear on the packaging) • 1 × 1.0 A charger • 1 × plastic case • 1 × fabric lining/inlay • Impact wrench socket sizes: 17 mm, 19 mm and 22 mm 550 Nm maximum torque Auction-ID: A1-40397-30
We sell a Rego SM4 stop machine. In bakery condition
ID3415 Metso Lokotrack 1415 S year/Baujahr 2015 9320 hours/hours 91 t Mobile impact crusher, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating chute, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt Chain-mounted impact mill, opening width crusher: 1540 x 1170 mm, maximum feed size: 1000 mm, with feed hopper with side elevation, vibrating trough, pre-screen with side belt, crusher discharge conveyor belt, 1-deck screening machine 3500 x 1600 mm, conveyor belt under screening machine, stockpile belt, return conveyor belt
BUHLER impacts dehulling machines suitable for oats, sunflower, spelt, soya and some others.. Almost not used since it was in a store Very nice conception , 18 cm impact ring hence hight output till 3 tonnes per hour according to Handbook manufacturer with an integrated diaphram to set the material flow input With an integrated device to set the speed by hand ... but also be set with speed electronical variator Many other Buhler machines available for dehulling lines : scourer MHXF, paddy table enquiries welcome Shipping to any destination possible
Fine impact mill B 315 with 15 kW motor, newly mounted
2 x Lindner Limator 1200 90 kW Year of Manufacture: 2013 6000 hrs Fully refurbished Find more here - .ucymachines/ Contact us at - sales@ucymachines
The machine is in very good condition Year of construction 2008 Max. Duty 40mm Capacity: approx. 10-50 to./h Weight is 6.3 tons Dimensions: 3.5 x 2.02 x 2.21m
Force 6- 45 kN Working height 300-490 mm Projection 100-195 mm as good as new. Condition Accessories - Buttons Embossing Unit with Numbers Applications: for stamping, embossing, numbering, straightening, riveting, punching, etc. Function: By pressing down the hand lever after placing the tool on the workpiece, the special strike spring is tensioned and released. The impact impact is transferred to the workpiece and is infinitely adjustable. Advantages: Infinitely adjustable impact force High impact performance with little effort Tolerance compensation (for different workpiece heights, the same impact force is always achieved) Pneumatic drive can be retrofitted Universal spring impact presses
Description: The mill is in overhauled condition. The machine housing has been completely overhauled. Rotor is equipped with new blow bars. Impact mechanisms and lateral wear plates are new. incl. three-phase motor 45kW, B3, voltage 400/690V, 50Hz, 1485/min. incl. hydraulic power unit, 3kW incl. V-belt pulleys for mill and motor Comprehensive spare parts package consisting of: - 3 pieces of rotor used (in good condition) - 1 piece rotor new - Various pallets with blow bars, wear pieces, impact mechanisms, etc. - Inlet hood
Impact protection, crash protection, shelf protection, column protection, column impact protection -Column impact protection: for square columns and steel beams, 4 pieces / 1 set -Type: Type 4 SAS-4-1501-34 -Height: 800 mm -Internal dimensions: 320 x 320 mm -Dimensions: 625/625/H800 mm -Weight: 18 kg
Stock number U1984-2 Used impact dryer for pellet by RIETER (Germany) model AERO 500 in stainless steel design (material 1.4541, AISI 321). Dryer is equipped with air blower providing 90 m3/min and driven by electric motor with power 18.5 kW. Dryer has reported output 4000 kg/h of outgoing product. Flow rate of water with pellet: 35 m3/h (maximal), 25 m3/h (nominal) and 20 m3/h (minimal). Nowadays machine has installed screens with mesh 1.2 mm. Machine new 1997. Shipping dimensions of dryer: width 1400 mm x length 3830 mm x height 2265 mm. Weight of machine – 700 kg. Body of drying chamber is sound-muffled. Technical documentation included in german language. Machine had been working on PP pellet.
Refurbished impact mill with 45 kW drive, inlet hood and hydraulic unit for opening the housing. The scope of delivery includes an extensive spare parts package (rotors, blow bars, wear pieces, impact mechanisms, etc.). Not run since the overhaul in 2025, therefore in very good condition.
Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 1 piece available -Dimensions: 305/145/H400 mm -Weight: 5.4 kg
Ref. 501 Impact scissors Cutting length 120 cm Table width 73 cm Accessories: 2 sets of knives ( upper and lower knives ) Condition: Used / Functional Ref. 501 Cardboard Scissors Cutting length 120 cm Table width 73 cm Accessories: 2 knife sets ( upper and lower knife ) Condition: Used / Functional
Impact crusher with inlet opening 1,000 mm x 350 mm, throughput capacity: up to 30 to./h (manufacturer's specs), maximum feed size: 300 mm, required drive: 37 kW. Except for the drive, all parts (doors, inlet, etc.) are available, but currently not assembled. The scope of delivery also includes an extensive wear parts package.
Rotor Dia. x W: 1.300 x 1.300mm. - Inlet: 1.360 x 1.000mm. - With 160KW E.Motor and Control-cabinet with soft-starter - New spare-parts in stock.
According to photos, weight estimated Auction-ID: A1-48554-106
Rotor Dia. x W.: 1.300 x 1.340mm. . With E.Motor and Inlet.
Rotor Dia. x W: 1.000 x 700mm - Included: 55 kW Electrical motor, Inlet, Hydraulic pump with control panel, 500 KG Service Crane. Many spare-parts in stock! Crusher can be sandblasted and painted.
Mach. No.: AD 26953 - Motor: Scania - Rotor size: 1.400 x 1.500mm - Included: Conveyors, Overband Separator, Dumpbunker, Feeders, Pre-screen and Hydraulic openingssystem
Inlet size: 1.370 x 990 mm - Rotor W x Dia.: 1.250 x 1.300 mm - With 200 kW Electrical motor
Inlet size: 1.020 x 700 mm - Rotor W x Dia.: 980 x 1.260 mm - With Electrical motor
Rotor Dia. x W.: 1.000 x 680mm. - Inlet: 690 x 350mm. - Included: 55KW E.motor, control-unit, hydraulic-unit and frame. New spare-parts in stock.
ID3649 Nordberg LT1213 year/Year of construction 2002 approx. 10,000 hours/hours 41.5 t Mobile track impact mill, with pre-screening and side discharge belt Chain-mounted impact mill, with pre-screening and side discharge belt
maximum number of results exceeded
please refine your search
25 € 
