image setter used for sale

Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 high-pressure gun with quick coupling and swivel joint in the input - Double jet tube with nozzle 065 and low pressure nozzle Optional (additional cost): - Hose reel - 30 m high pressure hose The images contain additional options. Shipping possible. Errors and prior sale excepted. We refer to our terms and conditions.

Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...

Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...

with Freeflow Printserver and Clear Toner M. No.: 3130055185 Counter (m): 7.3 Colors: 4 + varnishes Format : A7 – A3+ (SRA3) Equipment / Additional information: Image Resolution: 2400 x 2400 dpi VCSEL ROS Productivity/Print Speeds—AWM • 80/100 ppm (8.5" x 11"/A4 letter), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 4800/6000 full process color A4 (letter) 4/0 impressions per hour • 44/50 ppm (11" x 17"/A3–12" x 18"/SRA3), all weights 55–350 gsm (15 lb Bond to 130 lb Cover) • 2400/3000 (11" x 17"/A3–12" x 18"/SRA3 tabloid) 4/0 impressions per hour and 4800/6800 (8.5" x 11"/A4) IMP Paper Format/Sizes • Maximum Sheet Size: 13" x 19.2" (330 x 488 mm) • Minimum Sheet Size: 7.2" x 7.2" (182 x 182 mm), tray inserter kit supports for 4" x 6" (102 mm x 152 mm); see Optional High Capacity Feeder • Maximum Print Area: 12.83" x 19.05" (326 mm  ...

Suitable for dressing and profiling diamond and CBN grinding wheels., Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 LCD monitor and Ruvision software, On-board PC with Windows and 17 monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor., Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wh ...

Panel shears type Н3218Б or H3218B Working width approx. 2000 mm sheet thickness at 400 N/mm² approx. 6.3 mm functioning - Illustrations similar - Plate shear Type Н3218Б or H3218B Working width approx. 2000 mm sheet thickness at 400 N/mm² approx. 6.3 mm Functional - images similar -

Fixed heavy-duty shelf Do you need help with the creation of your warehouse? We are happy to advise you - in doing so, we draw on our many years of experience. You want a different composition of the shelves, no problem! We have our own large warehouse. We help you from planning to assembly to acceptance Everything from a single source. Scope of delivery 10 x Shelf stand Abm. approx. 480x110x10cm 01 x Shelf stand Abm. about 450x110x10cm 01 x Shelf stand Abm. about 350x110x10cm 32 x Traverse Color: blue 270x14x6cm Images may vary. Matching shelf gratings - new and used - can be found in our shop! International shipping costs on request!

4 up Violet CTP CTP FUJI V6 Full automatic with feeder for 3 formats plates, in-line die-cutting, Glunz&Jensenn imager and stacker B2 format in perfect technical and visual condition Price: on request

Siemens AXIOM Iconos R 200 as spare parts dispenser with the following system components: Generator Polydoros SX 65/80_Model No. 8609364 X2217 m. Bedienpult_Model No. 3157554 X2076 Tube Optitop 150/40/80 HC 0,6/1,0, Tiefenblende_Model No. 10092618_Bj. 01/2017 digital image processing Fluorospot Compact_Model No. 7144434 Gerätesteuerpult_Model No. 7030708 G5478 Image intensifier 40 cm_Model No. 3828832 V5092 Handauslöser_Model No. 9722059 G5455 Monitor Simomed HM 44_Model No. 2323464-2_Bj. 2006 Flat screen monitor Acer_Model No. V193 B_Bj. 2009 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EX ...

Gear pump Axial Piston Pump Overhauled by the manufacturer + conserved Manufacturer: Rexroth Type: A11VO60EP2G / 10R-NPC12N00H-S Further details and scope of delivery can be found in the Photographs. Grey and red lacquered available. Color may therefore differ from the images. for more information see pictures.

Hello, enclosed pictures of individual plans. Image numbering, dimensions see table: Image: (length x width 1 and (width 2, triangular formats) in meters) 1: 15 x 5 (0.30) 2: 33 x 5 3: see 1 4: 10 x 5 5: 15 x 3 (truck tarpaulin left and right 1.5 meters down) 6: 5 x 2.5 7: 7 x 2.5 8: 4 x 1 9: 1 x 25 meters 10: 4 x 2 (trailer tarpaulin left and right 1.5 down) 11: Convolent (partly damaged) without dimensions 12: 2 x 2 13: 17 x 1.5 14 without picture Tent Side length 4 x 10 meters Height 3 meters Various marquee tarpaulins, partly also truck tarpaulins Manufacturer, age, size, formats and condition unknown larger quantity available, see pictures cheap to hand in, depending on size, format and quantity

Bearing number: 3695 CNC LATHE Manufacturer: Mazak, Type: Quick Turn Nexus 350 MY Year of construction: 2006 Specifications: circulation diameter 420 mm dia. max. rotation. over bed 700 mm dia. Turning length 1538 mm Main engine power 30 kw Main spindle speed range 25-3300 rpm Spindle bore 102 mm dia. C Axis - Haupspindel Movement 0.001 degrees Z Ash Movement 1607 mm Y axis 150 mm Tool turret with 12 stations Powered stations revolver 1 12 pieces. Motor power Driven tools 7.5 Kw Driven werkzeuumdr. 25-4500 rpm Control Mazatrol 640T Nexus Fabr. Accessories: Various tool holders. Tool setter Chip conveying. Hydr. Lunette Length: 4300 mm, Høhe: 2400 mm, Width: 2600 mm, Weight: 8600 kg

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 24,605 mm Number of fields / shelf row: 09 pcs á 2,645 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profile: 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 36x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Traverse type: 2T 120 Clear width: 2,645 mm load per pair of trusses 1,500 kg, with the same. distributed load 72 ...

Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 30,660 mm Number of fields / row of shelves: 11 pcs á 2,700 mm Number of levels plus floor level: 02 pcs. Technical data on the volume: Pallet spaces per field: 09 pcs. Pallet spaces per row of shelves: 09 pcs. Total pallet spaces: 99 pcs. based on: Loading aids: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg Included in delivery are: 12x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profilem.: P 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 44 ...

Epson C3-A601S 6-Axis Robot Assembly Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started, the robots and servo drives of the Statioin are stopped, the pneumatic actuators are switched off and cannot be operated. This station consists of 3 functional substations: Functional sequence St.6.1: Control of ribbon cables: Lift the drive out of the chassis and tilt the drive code Control of 3 ribbon connectors by means of vision sensors on the robot gripper arm Reseat the drive in chassis St.6. ...

Machine Details Stock number 1105-03732 Machine type CNC lathe - inclined bed machine Brand BIGLIA Type B 111 - S Year of construction 1995 Control type CNC Control Fanuc 0-T Storage location FRANCE Country of origin Taiwan Delivery time by arrangement Freight base from location Technical details Turning diameter 180 mm Turning length 280 mm Control Fanuc 0-T Rod passage: 42 mm Speed range - spindle 6000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - places: 12 stations Tool holder direct pick-up Tailstock MK 3 Total power requirement 7.5 kW Machine weight ca. 3,2 t Space requirement approx. 2800x1700x1700 mm Accessories 3 - Baking - Lining Complete machine documentation Conveyor Parts catcher Collet device Electronic handwheel Coolant device Tool - Sett ...

S. No.: 12991843 // Power : Up to 13,000 #10 envelopes/hour in draft quality Up to 13,000 #10 envelopes/hour in letter quality Up to 12,000 #10 envelopes/hour in executive quality Image Area: 9.4" x 15" (23.876 x 38.1 cm) Equipment / Additional information: Media Size: Width: 3” minimum to 12.25” maximum Length: 5” minimum to 15” maximum Thickness: Up to 1/4" (subject to weight) Print Resolution: 150, 200, 300, 600 dpi horizontal, 600 vertical Print Modes: Draft, Letter, Executive Documentation

M.No.: A5VM021002592 // Total counter: 547851 Equipment / Additional information: Printer specifications : Print speed A4: 60 ppm / print speed A3: 33 ppm / Print speed SRA3: 31 ppm Print speed / hour: A4: 3316 pph / A3: 1792 pph / SRA3: 1681 pph Print resolution: 1,200 x 1,200 dpi x 8bit / Max 1,200 x 3,600 dpi equivalent Gradations: 256 gradations System specifications Paper weight: 62 to 300 g/m² / Duplex unit: Non-stack type, 62-300 g/m² Paper sizes: A5-A3+ (330 x 487 mm) Maximum image area: 323 x 480 mm Maximum paper input capacity: 4,250 sheets Maximum paper output capacity: 3,100 sheets Staple finisher 2-point and corner stapling / stapling up to 50 sheets / auto-shift sorting and grouping, output for up to 2500 sheets, EFI Fiery-Workflow

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

Bosch Turbo Scara SR6 swivel arm robot + controller Rexroth MA4/200-7301-M + RH04.0S Manufacturer: Bosch Tripod Length: Console HubQuill 40025 PN pressure max. 8 bar Load max 8 kg weight 48,5 kg incl. control Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / technical data see picture Since the article is available several times and the robots carry different work tools these are only sample images and may differ. Item condition used (Changes and errors in the technical data, information is reserved!) In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,0 ...

Technical data for the pallet racking system: Shelving system: Polypal Type: Stockpal Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 12,010 mm Number of fields / shelf row: 05 pcs á 2,300 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 06x pallet rack stand, used Material colour: similar. Ral 7021 anthracite grey Stand profilem.: P 85 x 63 x 2,00 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep 20x pallet rack trusses, used Material color: orange Box profile: 120 x 50 mm Traverse type: SKVBN11850NP22 Agraffe: 5 HK Clear width: 2,700 mm load per pair of trusses 2,400 kg, with the same. distributed load 40x safety pins, used Material color:  ...

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

Rip Software Kodak Prinergy Evo 8.1 Total 26292 Plates 830 nm thermal imaging platesetter Multi-cassette unit (MCU) S speed: 17 plates per hour Resolution Continuous variable 2032 to 3048 dpi (80 to 120 dpmm) 250 lpi max linescreen plate size: 685 x 762 mm (26.96 x 30 in.) Min. plate size: 300 x 228 mm (12 x 9 in.) image area size: 673 x 762 mm (26.5 x 30 in.)

Formwork/Beam H20 Form-on smartBEAM 20 P new from 6,50 EUR/lm Form-on smartBEAMS 20P new, bridge made of phenolic resin glued hardboard, available in all lengths: Subject to sale Your benefits: - reliably high load-bearing capacity over the entire length of the beam due to the homogeneous web material - Secured component load-bearing capacity through mechanical strength grading and load test for 100% of the belts - consistent product properties thanks to high dimensional stability - multiple savings compared to squared timber due to higher load-bearing capacity with lower weight Carrier produced according to DIN EN and with German technical approval. The images listed are sample images All prices excl. VAT and transport Subject to sale For questions Mr. Becker under 0176700 44689 Purchase and sale of scaffolding/formwork systems and construction ma ...

Nakamura Tome Super-Mill WY-250L CNC Multi-Axis Turning/Milling Center Age : 2012 FEATURES: FANUC 31I-A CNC CONTROL DUAL OPPOSED SPINDLES WITH C-AXIS UPPER & LOWER TURRETS WITH Y-AXIS LIVE MILLING ON BOTH TURRETS CHIP BLASTER LNS QL SERVO S3 BAR LOADER CHIP CONVEYOR SPECIFICATIONS: DISTANCE BETWEEN SPINDLES 47.24" MAXIMUM TURNING DIAMETER 8.9" MAXIMUM TURNING LENGTH 35.8" X-AXIS TRAVEL, X1/X2 6.3" / 6.5 Z-AXIS TRAVEL, Z1/Z2 35.8" BAR CAPACITY 1” MAIN SPINDLE: MAIN SPINDLE SPEED 3500RPM MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE BORE 2.6" MAIN SPINDLE NOSE A2-8 C-AXIS ROTATION 0.001 DEGREE SUB-SPINDLE: SUB SPINDLE SPEED 4500RPM SUB SPINDLE BORE 2" SUB SPINDLE MOTOR 20 HP SUB-SPINDLE NOSE A2-6 C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 37.2" UPPER & LOWER TURRETS: DRIVEN TOOL SPEEDS 6000RPM DRIVEN TOOL MOTOR 7.5 HP Y-AXIS MOVEMENT 4"/2" EQUIPPED WITH: FA ...

The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: selectable Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE clear width: 2,400 mm 08x locking pins, new Version: completely galvanized 01x chipboard II choice, used Thickness chipboard: 38 mm Chipboard width: 2,580 mm Deep chipboard: selectable Surface: coated if necessary (possibly in two parts) 01x chipboard II choice, used Thickness chipboard: 38 mm Particleboard width: 2,380 mm Deep chipboard: selectable Surface: coated if necessary (possibly in two parts) 16x drill screws, new Design: galvanized Dimension ...

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...

Nakamura Tome WT-300 Multi Axis CNC Turning & Milling Center Age : 2007 FEATURES: FANUC 18I-TB CNC CONTROL TWIN 24-STATION TURRETS WITH MILLING TWIN OPPOSED SPINDLES C-AXIS BOTH SPINDLES Y-AXIS UPPER TURRET LNS QL SERVO S3 MAGAZINE BAR FEED CHIP BLASTER HIGH PRESSURE COOLANT SPECIFICATION: MAXIMUM SWING 9.84" MAXIMUM TURNING DIAMETER 10.62" MAXIMUM TURNING LENGTH 30.71" DISTANCE BETWEEN SPINDLES 43.3" BAR CAPACITY 2.5" MAIN SPINDLE: MAIN SPINDLE SPEEDS 45-4500RPM C-AXIS ROTATION 0.001 DEGREE MAIN SPINDLE BORE 3.15" MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE NOSE A2-6 COUNTER-SPINDLE: SUB SPINDLE SPEED 4500RPM C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 33.46" SUB SPINDLE BORE 3.15" SUB SPINDLE MOTOR 25 HP SPINDLE NOSE A2-6 UPPER & LOWER TURRETS: NUMBER OF TURNING STATIONS 12 EACH NUMBER OF ROTARY TOOL STATIONS 12 EACH ROTARY TOOL SPEEDS 3600RPM ROTARY TOOL MOT ...

Machine Details Stock number 1105-03751 Machine type CNC turning and milling center Make CMZ Type TB 67 M Year of construction 2007 Control type CNC Control Fanuc 32 I MANUEL GUIDE Storage location HAGUENAU Country of origin spain Delivery time immediately Freight base freely loaded truck, from location Technical details Turning diameter 385 mm Turning length 400 mm Control Fanuc 32 I MANUEL GUIDE Spindle bore diameter 73 mm Number of controlled axes 3 Speed range 20 - 4,000 rpm Drive power 17 kW Rapid traverse speed 30 m/min Number of mounts in turret head 12 VDI 30 of which driven stations 12 Speed of the driven tools 4000 rpm Drive power on the driven tool 6 kW Tailstock Yes Weight 4 t Information CNC lathe with driven tools and short bar loading magazine in very good condition. Accessories: FANUC 32i MANUEL GUIDE -Conveyor - Three-jaw chuck DIA 210  ...

The scope of delivery includes: 02x workbench stand, used Material color: sendzimir galvanized Frame profile: 90 x 75 x 2.00 mm Stand height: 900 mm Stand depth: selectable Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 04x Workbench trusses, used Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE clear width: 2,400 mm 08x locking pins, new Version: completely galvanized The images serve to illustrate the material. The colour of the material may vary. - The workbench frames are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 5 working days.

This device is calibrated for rapid detection of metals in scrap and recycling. Within a second, you can see V2A, V4A, chrome steel, bronze, gunmetal, aluminum alloys and much more. The device is not suitable for precious metals or catalysts. The device has only been in use at the customer for about 3 years and is in good condition. The device includes two batteries for about 8 hours of operation each, a charger with charging cradle and the transport protective case. In contrast to newer devices, the internal camera is also unlocked here, so that you can save images of the measuring range in the device. The device has received all available software updates and can be used in conjunction with the smartphone app, via cloud computing or even as a single device.

Laminating machine / hot & cold Make SEAL Model Image 600-S Year 2010 Maximum width 1550 mm Maximum thickness 25,4 mm (incl the film itself) Details single sided lamination, hot and cold Production output 3.1 meters per minute Available direct

: 20000 kg length: 8000 mm width: 3000 mm height: 820 mm : star : lenkbar size of tyres: weight of the machine ca.: 4,0 t dimensions of the machine ca.: 8,25 x 3,0 x 0,82 mm Heavy duty trailer with - turntable steering - robust, low maintenance - with reversible drawbar, length 1320mm - 50mm impregnated wooden support. - Standard paint changes. On request in their Ral color. Would you like other loads and dimensions? Please contact us. Images are vehicles with special-drawbar height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type of imager Image quality Engine control External drum design Cast granite machine base High power Fiber Laser source, Laser class 1 CDI. Screen rulings up to 250 lpi, depending on imaging resolution Halftone: 1 - 99 % HighRes Optics: fully variable from 2540 to 4000 ppi on job to job base Grapholas Touch Exposer on Intel PC with Windows 7 Automatic mering via Automation Engine” in combination with Flexo Plate Making Module for AE or standlone Merger (requires Intel PC with Windows 7 ) Input file format: LEN or TIFF, compatible with all CDI family members RIP and screening options Esko software Plates Plate sizes Machine dimensions Installation requirements - Optional Imaging Engine - Industry standart PostScript/PDF RIP - Quality screening optimized for flexo (Circular, Double Circular dots) included in the RIP - HD Flexo Screening option for the finest print quali ...

Philips c.arm PULSERA CE mark / manf.2008 BIG Image Instensifier 17-23-31cm SW.1.8.1 / BV FAm. 1.2 # NEW BATTERY PACKAGE # 2x flat LCD Monitor´s Sony Printer / manuals - Full software option ́s - Welcome to inspect & test exw Germany

Man Roland 705 3B, Year 2004, ONLY 64 mio Impressions, Straight Machine, Max. paper size: 740x1040 mm, Min. paper size: 340x480 mm, Image area: 715x1020 mm, Plate size: 790x1030 mm, Speed: 16.000 s/h, RCI 2 Ink Control Remote Job Card, CCI colour regulation, Semi Automatic Plate Change, Roland Dampening System, Extra and NEW Accessories Included:, Densitometer Techkon, Techkon Presslink with Closed-Loop and Dynamic Presetting Ink, DPM (Display Press Monitoring Software), Automatic washing devices (rollers, blanket, cylinders), Powder Spray Grafix Cantronic 3000, Electronic double sheet control, Electronic side lay control, TECHNOTRANS refrigeration and recirculation, Ink temperature control, Insonorgraf (soundproof cabin), Machine Visible in Production, Machine Avaiable on 08/2023

Multihead weigher with 32 weighing heads (containers) with 0.8 Liter hopper volume, each. Special design to mix up to 4 different products. - Specifications: max. speed of the machine in neutral: 80 cycles/minute | weighing range: 10-3000g | accuracy: +/- 0,1-2g (depending on product) | IP protections class: IP65 | power: 220V, 4kW | stainless steel 304 | machine dimensions: L1960xW1890xH1588mm | weight: 760kg. Deviations from the sample image are possible. Optional for surcharge: weighing head with 1.6 L or 2.5 L hopper. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery  ...

The new 19-inch Rack PC SIMATIC IPC847C is equipped with the latest 2010 Intel Core processor technology (Intel Core i). The high computing power and PCI-Express technology make the IPC847C the perfect platform for high-performance applications, such as in measurement technology in test benches or in industrial image processing. The SIMATIC IPC847C also offers maximum system availability, expandability and compactness in 19" IPC technology: - optimal storage space utilization and data security with RAID5 - optional redundant power supply (AC) - Extensive diagnostic and monitoring options - Universal use for industrial workstation and server applications - Variety of integrated interfaces and expansion slots - Lower installation depth for installation in space-saving control cabinets of only 500mm depth The Rack PC is available as a control cabinet device for horizontal and ver ...

Dimension: Width: approx. 2,900 mm Height: approx. 1,038 mm Depth: approx. 1,100 mm Technical data for the workbench frame: Manufacturer: Jung Heinrich Type: T The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 1,000 mm Stand depth: 1,100 mm Stand profile: 100 x 65 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( welded truss ) 02x Workbench trusses, used Material color: yellow Box profile: 120 x 50 mm Truss type: HN 120|25 Clear width: 2,700 mm 04x locking pins, used Finish: completely galvanized 01x Chipboard of second choice, used Thickness chipboard: 38 mm Width chipboard: 2,900 mm Depth chipboard: 1,100 mm Chipboard, if necessary, two-piece 08x Self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm The images serve to illustrate the material. The colo ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,230 mm Number of fields / row of shelves: 01 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 02x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 04x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 16x Shelf supports, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image ...

Weighing unit with 24 weighing heads for very precise weighing, with 0.8 Liter volume each. Special design to mix up to four different products or to weigh one product in high speed. - Specifications: max. speed of the machine in neutral: 220 cycles/minute (when one product is processed, and depending on product). Weighing range 2-500g, Accuracy +/-1g, 10.4 inch Touchscreen (operation menu in three languages). - Stainless steel, IP64 (upgrade to IP65 possible, for additional costs) 220V/4kW, L2136xW1456xH1433mm, 1100kg. Deviations from the sample image are possible. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from sto ...

This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 2 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. -Specifications: number of feeding tracks: 2 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions: LxWxH customized. The image shows the 8-line version. Please note that our new prices are often below the u ...

This machine is suitable for counting of candies, biscuits, nuts, vegetables, plant bulbs, and most solid granules. The counter is equipped with dust resistance photoelectric detection technology, multi detection and alarm control functions. The 4 tunnels belt feeding device ensures an evenly feeding and no breakage of products. The structure and design of the filling hopper prevents that the products getting jammed. Control via touch screen interface, menu in English available. - Specifications: number of feeding tracks: 4 | capacity: according to customers samples, containers and filling quantity | working range: adjustable from 2-9999 per container | product sizes: min. ? 10mm, max. ? 60mm | large infeed hopper | compressed air: 6bar | power: 220V, 0.6-1.7kW | machine dimensions: LxWxH customized. The image shows the 8-line version. That machine/system is available in different versio ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 2,425 mm Number of fields / row of shelves: 02 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 08x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 32x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image mat ...

turning diameter: max. 820 mm turning length: max. 790 mm control: MSC 516 turning diameter over bed: 890 mm turning diameter over cross slideways: 560 mm centre distance: 900 mm Main spindle:: turning speed range - main spindle: 4 - 1.800 min/-1 power capacity - main spindel: 37 / 30 kW max. Torque: 3.870 Nm Number of speed ranges: 3 spindle bearing diameter: 170 mm spindle bore: 105 mm max. usable bar diameter: 89 mm spindle head: JIS A1-11 turret:: number of toolpositions: 12 pos. Shank height for square tool: 32 mm Drill shank diameter: max. 65 mm axis stroke:: x-axis: 435 (25 + 410) mm z-axis: 860 mm Tailstock:: tailstock: 680 mm diameter of quill: 110 mm quill stroke: 100 mm taper of center: MK 4 feeds:: rapid traverse: X: 5 / Z: 8 m/min Tipp feed: 0 - 1.260 mm/min total power requirement: 62 kVA weight of the machine ca.: 9,2 t dimensions of the machine ca.: 6,5 x 3,0 x 2,6 m ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 4,815 mm Number of fields / row of shelves: 04 pcs á 1,160 mm Number of levels plus floor level: 04 pcs. The scope of delivery includes: 05x Shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 16x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 64x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 01x Cross bandage, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image mat ...

Technical data for the shelving rack: Shelving system: Stow Type: Stowshelf Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 17,960 mm Number of fields / row of shelves: 15 pcs. á 1,160 mm Number of levels plus floor level: 04 pcs The scope of delivery includes: 16x shelf stand, used Material color: sendzimir galvanized Frame profile: ASUT10 Frame profile dimensions: 35 x 50 x 1.0 mm Adjustment grid: 25 mm incl. footplates, side walls The stands are pre-assembled 2,250 mm high 600 mm deep 60x Shelves, used Material color: sendzimir galvanized Dimensions: 1,160 x 600 x 35 mm 240x Rack racks, used Material color: sendzimir galvanized For fastening the shelves 04x Cross bandages, new Material color: sendzimir galvanized For stabilizing the shelving unit Note: The back walls which are depicted on the image  ...

cutting diameter: 660 mm saw band length: 9000 x 54 mm cutting width: 1,6 mm Capacity 90° - round: 660 mm Capacity 90° - square: 650 x 650 mm Capacity 90° - rectangle: 650 x 1080 mm Capacity 45° - round: 660 mm Capacity 45° - square: 650 x 650 mm Capacity 45° - rectangle: 650 x 670 mm Capacity 30° - round: 410 mm Capacity 30° - square: 410 x 410 mm Capacity 30° - rectangle: 650 x 410 mm total power requirement: 5,5 kW / 2775 Nm weight of the machine ca.: 7100 kg dimensions of the machine ca.: 2500 x 2200 x 4500 kg The KSY 2DT 650 is a semi-automatic and column-guided horizontal bandsaw. The machine also has a driven roller table, which is 2 metres long on the front has a spray mist has a spray mist cooling system. Equipped with a linear guided saw blade, the KSY 2DT 650 can perform precise and fast Mitre cuts. Standard Specifications - Swarf Brush - Hydraulic Blade Guide - Hydr ...

cutting diameter: 550 mm saw band length: 6850 x 41 mm cutting width: 1,3 mm Control: Halbautomatisch Cutting area - square: 550 x 550 mm Cutting area - flat: 550 x 700 mm total power requirement: 4 kW / 1580 Nm kW weight of the machine ca.: 3775 kg dimensions of the machine ca.: 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.