image setter used for sale

Injector Brand: Setter (Santonja), 2 stations, hydraulic, 2 engines: 7.5 KW (10 HP) each. Total: 15 KW (20 hp) Direct injection to the cut for footwear.

Size: 930 x 1140 mm Equipments: Thermal-CTP 2 laser heads Gen II, ( with 64 Laserdiodes) Class 160 Resolution: 2540 dpi, SCL Single Cassette Loader Productivity option = 21 plates/h.

Lamination Machine

S. No.: UMF00631 Speed: prints Up to 70 p / m. Counter: Print Total: 1‘618‘150 Equipment / Additional information: - Envelope printing - Stapling - 2 or 4 hole punching - Folding - Three-knife trimmer - Scanning Printing method: color laser printing Print resolution: 2,400 x 2,400 dpi Max. Paper capacity: 7,650 sheets (A4 / A3) Max. Output capacity: 11,200 sheets (A4, 80 g / m²) Possible formats: Paper cassettes 1, 2 and 3: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Multi-purpose tray: Standard formats: A4, A4R, A5R, A3, SRA3, maximum 330 x 483 mm Envelopes: No.10 (COM10), Monarch, ISO-C5, DL Possible grammages: Standard cassettes: 52 to 220 g / m² Multi Purpose Tray / Optional Paper Trays: 52 to 300 g / m² Double-sided printing: 52 to 300 g / m² 2 complete sets of toners THE FOLLOWING NEW & ORIGINAL CANON TONER CARTRIDGES ARE AVAILAB ...

IMS Mammography Giotto Image with the following device components: Tube Varian M-113 SP 0.1/0.3_Bj. 2002 Table top 18x24 and 24x30 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be carried out by a specialist authorised by the manufacturer or technicians!

Canon Image Press V1000 Year:2022 Print Speed (BW/CL):100 ppm Recommended monthly volume: 75,000-600,000 pages Maximum monthly peak volume: Up to 1.2 million pages Registration tolerance: Front to back: 0,70 mm Printing method: Colour Laser Beam Printing Print Resolution (dpi): 2,400 x 2,400 Machine type: A3 Digital colour Press cut-sheet Core functions Reading: 600 dpi x 600 dpi Printing: Up to 1,200 dpi x 1,200 dpi Processor: 1.8GHz, 1.3GHz Dual Control Panel: 10.1 inch Memory: 6GB Hard Disk drive SSD 240GB Mirroring Hard Disk Drive: Yes Interface Connection: NETWORK Standard: 1000Base-T/100Base-TX/10Base-T Power supply: 220-240V/16Ax2(Main Station), 220-240V/16A(Fusing Station) Dimensions main engine (W x D x H): 1,583 x 872 x 1,040 mm Weight: Approx. 410 kg Copy Speed (BW/CL): 100 ppm First-Copy-Out Time (A4) (BW/CL) Weight ...

CANON Imagerunner Advance C5235i2018 CANON Imagepress C6502019 CANON Imagepress C650 All three devices were completely checked and given a general service at the end of March.All three print flawlessly and flawlessly. Since the last service only a few sheets have been printed at a time.Sufficientquantities of toner in all colors are available for all machines. Find more here - / Contact us at -

Digital printer Type: ImagePress C8000VP Manufacturer: Canon Year: 2018 At the entrance, two vacuum tanks max. 330x488 mm and manual feeder for long format 330x762 mm, at the output finisher AN2 for booklets with V1 binding. Creo A8000 print server including X-Rite spectrophotometer Wear of cylinders and fixation 21 to 37%, ITB wear 12%. 6504000 A4 pages printed In good condition, fully functional Find more here - / Contact us at -

huge quantity of refractories! Cordierite, Siliciumcarbide, recrystalized Siliciumcarbide, Mulite, etc. If you need something, don´t hesitate to contact me! j.schmidling@ceramicinfocenter.de

Reference Num.: 3752 Brand: AGFA Type: Dupliphot 740 Available: directly Status: Not in production Location: Deutschland

<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Togethe ...

BasysPrint UV Setter 850 2013 Manufactoring 3-Head UV laser diode 24 Plates/Houer SCL with 2 Carriges Max: Plate format 940 x 1150 mm Min: Plate Size 200 x 200 mm With Interplater 85 PlateProcessor Server PC, 20 TFT Monitor. Laser diodes in best condition.

<b>Technical data:</b> Manufacturers; Interroll Condition: Good (Used) Max Payload: 50Kg Belt speed: 1.0 m/s Stroke time: 0.3s Rated voltage: 24V/48V Drive motor and lifting motor Control: Multi Control 6 pieces in stock <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopic telescopic applications for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics  ...

Format (cm): 56 x 42

max. film width: 355 mm max. speed: 0 /h serial no.: 8518 voltage: 100-240 V frequency: 50-60 Hz weight: 150 kg dimensions of press (L x W x H): Belichter 75 x 85 x 100 cm dimensions of press (L x W x H): RIP 70 x 50 x 70 cm repeating accuracy: +/- 25 µm RIP included up to 3000 dpi Red laser diode max. page width 355 mm max. 200 lpi screen ruling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. film width: 356 mm max. speed: 338 qcm/min Dimensions (L/W/H): 85x75x100 cm repeating accuracy: 25 µm material: Materialvorrat 76 m weight: 162 kg max. exposure length 2000 mm Resolution max. 2400 dpi red laser diode 670-680 nm point sizes 20-35 µm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Set packer for glasses, packing pattern 3 x 4., The pre-grouped glasses are transferred into the prefabricated tray using vacuum suction cups., The 2013 VestTech Jar Packer is a reliable solution for the packaging industry, specializing in the precise and safe packaging of jars. The unit has a solid construction designed for long-lasting use in demanding production environments. With its user-friendly operation and high efficiency, this jar packer offers an ideal combination of performance and reliability. It is perfect for companies looking for a cost-effective way to optimize their packaging processes. With the VestTech Jar Packer, you can ensure that your products are packaged safely and precisely, resulting in improved productivity and higher customer satisfaction.

Spectrallight Gretag Macbeth Spectralight III uses a patented filtered tungsten halogen daylight source. This means that it contains an even balance of color energy, just like natural daylight. The more even the balance of color energy, the more accurate the light source makes color. This color energy is displayed in a spectral power distribution curve (SPD). If your light source doesn't match the SPD curve for natural daylight, your ability to evaluate color is distorted. That means you could approve color that your customers reject and vice versa! Manufacturer: Gretag Macbeth Type: SPL III Further data: see also photos All information without guarantee

Polimero A4 imager washer-dryer; good condition; cleaned and tested; Format 320x220mm; washout with magnetic plate; exposers; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

Keyence XG-X2500 Image Processing Controller, Image Processing Controller XG-X Manufacturer: KeyenceManufacturer part: XG-X2500Type: Image processing controller, compatible with 5 megapixel camerasManufacturing country: Japan Item condition: This article comes from a company dissolution of one of the largest automotive parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some articles have traces in stock. PSH2R3E19-7

Auction-ID: A7-44656-28

Including hydraulic tensioners / various diameters and lengths

Including hydraulic tensioners, shrink holders, shrinkfit, Weldon and blank tool/ unused and in original packaging

Platesetter BASF EF III; good condition; cleaned and tested; Format 900x1200mm; pre- and main exposure; Post-exposure; dryer; Radiator. Exposure unit BASF EF III; good condition; cleaned and checked; size 900x1200mm; before and normal exposure; postexposure; dryer; Chiller.

Inv. Num. : 8001 Type: IM6120 Producer: KEYENCE Created: 2014 Parameters: Axis X: 100 mm Axis Z: 30 mm Measuring range: 200 x 100/125 x 25 mm Weight: 36 kg

Including: weldon, collet, drill & tap bush holders/ including sorting racks

Film imagesetter Linotronic 630 Post Script RIP 50 exposure format: 483x450mm (19x17.7inch) without register option 483x428mm (19x16.9inch) with register option Material width film: 280,310,340,370,400,430,460 mm Min. width and length not specified Dimensions (W x H x D) 820 x 890 x 960 mm (32.2 x 35 x 37.8 inch)

Grafoteam PST 26/780 plate stacker; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26/780; good condition; cleaned and checked; new arm motor; max.plate size 820x780mm, min.324x394mm.

Manufacturer: Cognex Type: In-Sight 9912 IS9912M-373-50 (monocromn with RedLine) From stock liquidation Location: Stuttgart

• Max. exposure format: approx. 505 × 525 mm • Max. film width: approx. 530 mm • Material thickness: up to approx. 0.10 mm • Resolution: up to 200 lpi (256 gray levels), optionally up to 400 lpi with delta technology • Accuracy: ± 0.2 mils (0.005 mm) across the entire screen and multiple films • Speed: up to approx. 1,320 mm/h film running length • Interfaces: High-Speed Bitmap/SpeedWay Interface, RIP connection • Power supply: 100-240 V AC, 47-63 Hz (single-phase RIP), main unit 3-phase supply • Dimensions (L × W × H): approx. 1,200 × 750 × 1,100 mm • Weight: approx. 250–300 kg • Operation: Daylight loading, exposed film or RC paper, optional CTP (polyester) plates

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

CTP-Mitsubishi - DPX 460 – Platesetter with Rip-Mate PC Year of construction: approx. 2007 incl. software and accessories incl. roll films in their original packaging For the production of ready-to-print die-cut polyester printing plates Mitsubishi SILVER DIGIPLATE Suitable for the following printing presses: For Heidelberg QM 46, GTO 46, GTO 52 For Ryobi 5xx For Roland Edelmann Practica 400x510mm For Heidelberg Speedmaster SM 52 – PM 52 2x Supply Rolls 1x integrated register punch for PM52- SM52- Autoplate

Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP Plate Setter - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output speed: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Sturdy construction for prepress environments

Platesetter Washer Dryer Polimero A4; good condition; cleaned and tested; Format 320x220mm; Washer with magnetic plate; Imagesetters; Dryer with 2 pull-outs. Exposure-washout-dryer unit Polimero A4; good condition; cleaned and checked; size 320x220mm; washing unit with magnet plate; exposure unit; dryer with two move outs.

original Kodak laser head lift for TH3

Kodak Magnus 400 II LDA year 2009 100,000 plates Stacker without RIP without plate processor in production good condition available immediately

Flexo Laser FL- Piccolo (Xeikon) – flexo CTP year 2008 fiber laser 20W – 1.25 plates/h approx. 3,000 m2 exposed rotating external drum vacuum Digital Exposable Photopolymer Flexo Plates all thickness, all brands exposable size 635 x 762 mm Resolution 2540 dpi data format separated 1 bit tiff weight 500 kg good condition

Only for Export ! Fuji PI1400HS ( ECRM VRL36HS ), A3 HighSpeed Film Imagesetter, HQ-RIP with PC and second Take up Cassette

KEYENCE Universal Camera System CV-X consisting of the following components: 2x Camera CA-H500MX 2X Illumination Type CA-DRM10X 1x Controller CV-X450F Controller for 2 Cameras with screwed 1x LED Lighting Control Expansion Unit Type CA-DC60E The expansion unit type CA-DC60E can also be easily unscrewed. Complete sale or individual sale - contact us!

Serial number: LNM05129 Includes T1 stapler Print counter shows mixed use in black and white and color Professional digital printer with scanner and finishing modules Auction-ID: A7-44072-1

CTP plant Agfa Acento S; good condition; 32 diodes; Meter reading 85,000 plates; RIP Apogee X; Washout Agfa Azura C 85; Grafoteam PST 26 Plate Stacker. CTP system Agfa Acento S; good condition; 32 diods; counter 85,000 plates; RIP Apogee X; washer Agfa Azura C 85; plate stacker Grafoteam PST 26.

CTP System Creo Trendsetter VLF 5880; good condition; Video Die Cutter Hatchet OPU 200 VB Bj.2017; Observation Unit Mega Steel; Development machine Kodak THDX 165 Bj.2014; intermediate table; Outlet table. CTP System Creo Trendsetter VLF 5880; good condition; optical video punch Beil OPU 200 VB year 2017; control terminal Mega steel; processor Kodak THDX 165 year 2014; intermediate table; outfeed table.

Runner Advance C7260i Booklet Finisher L-1 A4 tray Auction-ID: A7-44656-27

max. plate format 1130 x 950 mm 64 Laser Diodes 405nm Resolution 2400 dpi Platecounter 31260 Laser on time 940 hours only well-maintained available immediately delivery worldwide, Price on request

1.0 St. gebr. Image Processing Measuring Device Manufacturer: MITUTOYO Type: QS200Z Year of Make: 2011 For technical data, see photos.