129,254 used machines on RESALE, but how to find them? Machine Search
Servo motor, electric motor, DC motor, stepper motor -Manufacturer: Berger Lahr, stepper motor servo motor -Type: RDM 599/50 -Shaft: Ø 10 x 30 mm -Dimensions: 130/85/H85 mm -Weight: 2.5 kg
electric motor, three-phase motor -Power: 1.15 kW -Speed: 500 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -Weight: 11 kg
Pipe diameter max. 1,500 mm Tube diameter min. 200mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg
Pipe milling and cutting machine FEIN - RDG - 18 - 2b Pipe diameter max. 1,500 mm Tool diameter max. 200 mm Feed rate 40 mm / min Sawing of pipes made of steel and grey cast iron up to 22 mm wall thickness Milling of steel and grey cast iron pipes up to 15 mm wall thickness Cutting speed 35 m/min Compressed air demand 6 bar - 2m³ / min Weight approx. 90 kg
3X Identical Steam Turbine sets Each steam turbine set is a complete system except the boiler for the steam generation. If sufficient water vapour is already available from another source, this can also be used. In this case, a boiler is no longer required. The three sets have never been run (like new), however, this sets are already more than 10 years old (year of production 2009). The project for which this sets were purchased has never been implemented. The steam turbine sets are running on 60 Hz. Depending on the country, where the steam turbine sets should be used, they may have to be converted to 50 Hz (replacing the gearbox and the clutch of the generator). This is possible and can be done by experienced companies. We can recommend a German company that has extensive experience in the errection and maintenance of this type of steam turbine. The unused steam turbine sets are pa ...
Transformer Michael Riedel RDRK 30/36 Manufacturer: Michael Riedel Transformatorenbau GmbH Type: RDRK 30/36 Primary voltage: 3 × 380/400/420 V Secondary voltage: – 24 V DC (30.0 / 36.0 A) – 15 V DC stabilized (1.5 A) Frequency: 50/60 Hz Power: 0.74 / 0.88 kW Insulation class: IP00, 100% ED Dimensions: approx. 130 × 210 × 200 mm Weight: 10 kg Condition: used, dismantled from STAMA MC 325/S Price: on request / plus VAT
1 x Used ILLIG RDM70K PP-Mold for 8-Cavity, Rectangular Containers 145.5 x 65.3 x 41 mm age December 2007. Product drawing is attached.
PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm
Technical data see Pictures attached
temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1 x Used ILLIG RDM70K PP-Mold, 5-Cavites, Strawberry Containers 174 x 103 x 90 mm, age December 2005. Product drawing is attached.
This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine.
Refrigeration Compressor / Condenser Unit Second Hand Manufacturer: Franchill Ltd Model: SP3X45-RDM-FS 400V-1PH-50Hz Compressor / Heater Model: ZB45KCE-TFD 3 x 4.6kw For more information and more available stock please visit us at - advancedbrewing.co.uk
Load capacity: 80kg, horizontal/vertical reach: 2100mm/3300mm, repeatability: +/-0.07mm, weight: approx. 540kg. Documentation available. An on-site inspection is possible.
turning diameter over bed: - mm turning diameter over slide rest: - mm turning length: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: - mm turning length: - mm swing diameter over bed slide: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m WEILER Bundle - RDU - LZ 330 - 2 x Commodor - UD 24 - DZ 67 V3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Continuous conveyor  inclined conveyor Manufacturer : Lippelt Type : Inclined conveyor Year of construction : 2010 380 V 50Hz 0.12kW On castors Dimensions : W:77cm D: 157cm H: 126cm Belts width 60cm Details see picture   Â
Radial fan, dust extraction fan, fan, extraction, dust blower -Manufacturer: Ferrari, Radial fan in soundproof container -Container manufacturer: Wagner Lufttechnik -Engine: Siemens, 11 kW -Speed: 1460 rpm -Pressure and volume performance: unfortunately not visible -Fan wheel: Ø 700 mm -Connection input: Ø 790 mm -Connection output: 700 x 500 mm -Quantity: 2 blowers available -Price per piece -Dimensions: 2130/2135/H2480 mm -Weight: 1325 kg
radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Total weight: 584 kg
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 30 rpm -Performance: TA = 0.06KPM -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 360/170/H175 mm -Weight: 14.2 kg
Luminous flux motor, motor, gear motor, electric motor, three-phase gear motor -Motor speed: 2950 rpm -Speed gearbox: 124 rpm -Power: 0.37 kW -Construction: B14 -Shaft diameter: Ø 20 mm -Protection class: IP 44 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 630/220/H180 mm -Weight: 30 kg
adjustable gear motor, variable speed gear motor, electric motor -Manufacturer gearbox: Stöber type RD11-1003 -Motor manufacturer: ABB Motors Type M2AA071A -Engine power: 0.37 kW -Speed range adjustable: 64-641 rpm -Shaft: Ø15 x 40 mm -Dimensions: 450/210/H180 mm -Weight: 15.7 kg
End-side driver, end-side driver, end-side driver, driver tip, end-side driver, end-side driver -Manufacturer: Lenze ABW, end face drive (2 pieces) -Type: RD4 / MS4 -Forehead dimension: Ø 40 mm / Ø 45 mm -Recording: MK4 -Price/Fee: complete -Transport dimensions: 173/112/H60 mm -Total weight: 2.4 kg
General SKU253N183 MakeJohann Kreuziger Maschinenfabrik TypeRDH 500 RERE No.21159 Year of construction1986 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume450 Ltr. Motor80 KW Specified Features - Planetary mixer Planetary mixercheck 1 Mixing/kneading shaftmixer arm and dissolver disc With scrapercheck Motor57 kW (mixer): 20 kW (dissolver) With variable speed drivecheck With gear boxcheck With panø 950 x 650 mm (on wheels) Capacity450 l Outlet75 mm With hydraulic liftingcheck (3,6 kW) MaterialStainless steel Information With switchgearcheck (as is) Floorspace3,6 x 1,8 m Total height3,4 m Weight6000 kgCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicOther chemicalFine chemicalsOintmentsPaints & coatingsOils & fatPlanet ...
General SKU212T536 LocationBarneveld CEcheck MakeAmmag Main Features Motor1.5 KW Length1400 mm Inlet diameter200 mm Specified Features - Horizontal screw conveyor MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 Horizontal conveyor screwcheck Diameter187 mm Length1398,5 mm Shaft diameter106 mm Pitch103 mm InletDia. 200 mm OutletDia. 200 mm Motor1,5 kW 220-240/380-415 Volt (Ex) Screw speed96 rpm Outlet height388,9 mm Height between in- and outlet1130,1 mm Information TypeRDSCHN D187x1300x3,9° Mach.No.SR-1601 SG09 Year of construction2008 Floorspace1,1x0,5 m Total height0,65 m Weight230 kg ATEX compatiblecheckSpicesPlastic & polymersHorizontal screw conveyorsCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfecti ...
ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts
PP-Drinking Cup Mold for ILLIG RDM75Kc, manufactured by TERMOSTAMPI, age 2022 with Inmold Forming and Trimmimg, for PP-Cups Ø98 mm dia. for the ILLIG RDM 75Kc, consists of:, 24 cavities (6 x 4 arrangement), complete with Trimming Knives, Cavity Inserts, Ejectors, Down Holders., and 4 series of inserts for the following PP drinking cups:-, 24 oz, 20 oz, 16 oz, 12/ 14 oz, Complete with Stacker Parts for the ILLIG PH75 counter/ stacker
Brake resistance SIEMENS, CGS RDL9141 900Vdc 400R ( RDL9141900Vdc400R ) 6SE3290-0DA87-2RA0 80 W 400 Ω Dimensions: 280 x 80 x 60 mm
Pneumatic Ratchet, Pneumatic Ratchet, with Torque Adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool Holder: 3/8 New ! Dimension ( Air Ratchet ): 390 x 80 x 60 mm Dimension ( Packaging ): 520 x 110 x 90 mm
Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 piston Ø 125 mm stroke 200 mm Rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm
Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 25 S ( RDRKL25S ) 0.8 kVA Prim. 3 x 380 V sec. 24 V DC 25 A 50 - 60 Hz spare part for TRAUB TND300 ! used, tested, with downstream three-phase bridge rectifier ! Dimensions: 210 x 210 x 190 mm
Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 10 S ( RDRKL10S ) 0.34 kVA Prim. 3 x 380 V sec. 24 V DC 10 A 50 - 60 Hz spare part for TRAUB TND300 ! used, with downstream three-phase bridge rectifier ! Dimensions: 165 x 155 x 160 mm
Isolating transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKG 40 KM ( RDRKG40KM ) 1.2 kVA Prim. 3 x 230 / 400 - 480 V sec. 24 V DC 40 A 50 - 60 Hz with downstream three-phase bridge rectifier ! Dimensions: 285 x 230 x 210 mm
Brake resistance SIEMENS, CGS RDL9143 900Vdc 85R ( RDL9143900Vdc85R ) 6SE3290-0DC87-2RA0 400 W 90 Ω used, tested ! Dimensions: 400 x 105 x 70 mm
https://www.sony.at/electronics/support/home-video-dvd-players-recorde rs/rdr-at205/specifications Auction-ID: A7-45172-162
maximum number of results exceeded
please refine your search
10 € 
