illig rd used for sale

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

THERMO FORMING MACHINE ILLIG RDM K 50 WITH INLINE EXTRUDER (COMPLETE LINE) M. No.: 322 Counter: 80188 hours // Power: 800-1000 kg/h Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Kuhne Extruder KF70E & Co. Extruders K45-24D -Colotronic dosing unit CSK30 with 4 components -Kuhne smooth and cooling rolls (calendering) / GA4/900; puller: BA2-1/900 -Thermoforming machine ILLIG RDM K 50 -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -Illig mill RS75B // Age: 1999 Fully existing infrastructure; control cabinets, pumps, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

Due to a clearance sale this Machine is on Sale at a CLEARANCE Price Inline ILLIG RDM 63/ 15d Thermoformer with: Auto unwind stand Auto Start System Servomotor Indexing Double heating, Sheet Sag Control Auto Rail Spreading for PP Plug assist Max. form area 750 x 305 mm Max. film width 770 mm Max. index 360 mm Max. depth of draw 150 mm Encoder on the Main Drive Shaft SCHLEICHER P-SK 2/ 126F Modern PLC Controller for Control of Form Air, Blow- off etc. Pneumatic Cylinders for automatically raising the Transport Rails after Forming Cycle. aids in removal of difficult Products from the Mold Separate Control Cabinet Machine is ready for PP

PS, K-Resin Lid Mold for the ILLIG RDM 58/ 3, dia. 120 mm, 8 Cavity, together with associated stacker Parts

M. No.: 322 // Counter: 80188 hours Max. film width 700-800 mm Equipment / Additional information: The machine is constructed as follows: -Greiner stacking / Transfer device R3 (No.:00020) // Age: 1998 -ILLIG mill RS75B // Age: 1999 Control cabinets, etc. Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp

Machine was overhauled, including moulds and tools.

Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

Illig SB 53- C from a workshop for the disabled with few operating hours Serinenr. 233-2484 Siemens Simatic control system Dimensions in mm approx. 2000x1600x1000 for transport reasons, the cylinder was removed (see photo) Also for sale: Illig SK 74-C from 2006

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

This ILLIG SB 74E-9 vacuum forming and punching machine for plastics was made in the year 2007 in Germany. The machine has a working area of 505 x 775 mm.

Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg

ILLIG SB74 C 9 Thermoforming and punching machine Vacuum forming and punching machine for plastics. Workbench maximum 505x775 We have shutters to change the dimensions, 770x455, 400x770, 340x770 The maximum height of the die (mold) 100mm Film thickness 0d 0.15 -2.0mm Year of production 1985 - in 2019 it underwent a comprehensive modernization of automation (diagrams in the pictures) Visible in the photos. (control cabinet, controller, touch panel.) 400V power supply Input power:11.2 kW completely new drivers and diagrams. modernization completed in August 2019 since then machine worked approximately 6000 hours panel has English and Polish languages

Illig RV 53 thermoforming machine Year: 1988 Model: RV 53 Forming area (VxH): 500 × 350 Drawing depth: 100 mm Material thickness (min): 0.10 mm Material thickness (max): 1.40 mm Feeding systems: roll fed Fixed mobile table Machine in production The machine cycle is: heating, thermoforming, cutting.

Illig RV 53 thermoforming machine Year: 1990 Model: RV 53 Molding area (VxH): 500 × 350 Molding depth: 100 mm Material thickness (min): 0.10 mm Material thickness (max.): 1.40 mm Feed systems: roll fed Lower mobile table stacker Machine in production The stacker is incomplete, the top and bottom table components are missing. Cutting station fully operational, regeneration was 2 years ago, heating of the cutting station fully operational, upper and lower table in good condition, heating 100% efficient. Capacity approx. 25 cycles per minute. Cutting station regeneration, pump regeneration, chain regeneration, The drive for transporting the film has been replaced with a servo motor with an inverter

Illig SK 74-C from a workshop for the disabled Year of construction 2006 Serial No.426-0172 JM80Q2 +2 pallets with approx. 38 rolls of film Dimensions in mm approx. 2200x1600x1600

Description: The forming machine is equipped with automatic sheet feeding unit. The sheet feeding unit also have a top preheater by the design of Illig. It is fully equipped with pneumatic cylinders and ceramic heating elements. Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 4,000 mm, weight approx.: 12,000 kg

Heating output: 22.15kW, motor power: 2.5kW, max. compressed air supply: 10bar, including spare parts.

Material : PS – PS/PE – PE/PS/PE– PVC – PET – ABS // Forming Area (Vxh): 700x500

Work table maximum 505x775 mm Maximum height of the matrix (mould) 100 mm Foil thicknesses from 0.15 - 2.0 mm Year of production 1983 length - 4500mm. width -1900mm. height - 2800mm. weight approx. 2000 kg. 400V power supply Max power consumption - 11.2 kW

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

Complete RDF installation, consisting of: first shredder Lindner Jupiter 1800 second shredder Lindner Komet 2800 windshifter eddy current and magnet dust filter all conveyors

Technical data of the bale opener line: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special  ...

Bremswiderstand SIEMENS, CGS RDL9141 900Vdc 400R ( RDL9141900Vdc400R ) 6SE3290-0DA87-2RA0 80 W 400 Ω Dimensions: 280 x 80 x 60 mm

Pneumatic ratchet, with torque adjustment INGERSOLL-RAND, CHARLES MAIRE BALD 3203 RD5 / 35 ( BALD3203RD5/35 ) Pmax: 6.3 bar Pmin: 4 bar Speed: 250 rpm Tool holder: 3/8 New ! Dimension ( pneumatic ratchet ): 390 x 80 x 60 mm Dimension ( packaging ): 520 x 110 x 90 mm

Bremswiderstand SIEMENS, CGS RDL9143 900Vdc 85R ( RDL9143900Vdc85R ) 6SE3290-0DC87-2RA0 400 W 90 Ω used, tested ! Dimensions: 400 x 105 x 70 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 25 S ( RDRKL25S ) 0,8 kVA Prim. 3 x 380 V sec. 24 V DC 25 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, tested, with downstream three-phase bridge rectifier ! Dimensions: 210 x 210 x 190 mm

Throttle check valve, hydraulic valve FAG RDRRV10-40-P 500 bar Connections: G1/2 New ! Dimensions: 90 x 35 x 100 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 10 S ( RDRKL10S ) 0,34 kVA Prim. 3 x 380 V sec. 24 V DC 10 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, with downstream three-phase bridge rectifier ! Dimensions: 165 x 155 x 160 mm

Pneumatic cylinder JOUCOMATIC PES 125 TA 200 RDM 45070772 Piston Ø 125 mm stroke 200 mm rod diameter Ø 32 mm Dimensions: 500 x 220 x 155 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 30 K ( RDRKL30K ) 0.9 kVA Prim. 3 x 220 V sec. 24 V DC 30 A 50 - 60 Hz with downstream three-phase bridge rectifier ! used, tested ! Dimensions: 210 x 210 x 210 mm

Pneumatic cylinder JOUCOMATIC PES 100 TA 50 RDM 450 70 755 Piston diameter Ø 100 stroke 50 mm rod diameter Ø 25 mm New ! Dimensions: 300 x 180 x 125 mm

RD24 cable socket, 13 pieces BINDER series 693 99 4226 00 07 Connection: Connector socket, straight Pole: 6 + PE Diameter: Ø 29 mm Length: 64 mm New Dimensions (single plug): 64 x 29 x 29 mm Dimensions ( packaging ): 125 x 125 x 65 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKG 40 KM ( RDRKG40KM ) 1,2 kVA Prim. 3 x 230 / 400 - 480 V sec. 24 V DC 40 A 50 - 60 Hz with downstream three-phase bridge rectifier ! Dimensions: 285 x 230 x 210 mm

Differential pressure transducer GLATT RDNT-423-050R Pressure range: 0 - 5 kPa ( 0 - 0.05 bar ) Output signal: 4 - 20 mA Supply voltage: 24 V DC for DIN rail mounting New ! Dimensions ( differential pressure transducer ): 130 x 68 x 44 mm Dimensions ( packaging ): 195 x 95 x 60 mm

TANDBERG RDX Quikstore external drive, USB 3.0, with power adapter

Material container made of stainless steel, 150 l, mobile, with telescopic suction tube and hinged lid

Length approx. 1100 D = 450 to shut off channels. With two compressed air connections and drawbar eyes. See PDF

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

Dresser-Rand steam turbine (new price 2.8 million EUR), unused and as good as new - built 2009 - inlet steam stream 53,000 kg/h - 1 generator type Syn. 3 phases - 60 Hz, 12.3 MW - 4,500 rqm / 1,800 rqm - gearbox RENK type TL-500, BJ. 2009, GEA surface capacitor, type 2/III/H, BJ 2007, 2 condensate pumps type Etanorm G080-400 G11, BJ 2007

Radial drilling machine make CONTIMAC type RDP 20 AMachine -No: 1001003 built in 2009Technical specifications:Max. drilling capacity: 13 mmSpindle mount: MK 29 spindle speeds: 240 - 2840 rpm.Quill stroke: 80 mmHead rotatable by: 360°Column diameter: 80mmTable size: 450 x 700 mmDistance between table - spindle: 450 mmDistance spindle - base plate: 620 mmMachine height: 1500 mmDrive power: 0.56 kWWeight approx.: 100 kgWith- baseusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

bore capacity in steel (diameter): 20 mm turning speeds: Max. 2580 U/min tool adaptor: MK2 weight of the machine ca.: 0,05 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turret Lathe Fabr. WEILER Type RDU 260/38Machine -No: 1554Center height: 125 mmSpindle bore: 38 mm14 spindle speeds: 110 - 3600 rpm.Commute d. Revolver slide: 100 mmTurret: with 6 toolsDrive power: 0.5 / 1.2 hpExternal dimensions: 1400 x 600 x 1170 mmWith- integrated collet device andCollet set- Parting support- Revolver stick- 2 quick-change steel holders m. different.insertsused, from operating resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools