il sin used for sale

General SKU397M504 LocationBarneveld MakeSingle Temperiertechnik gmbh TypeSTL 1-27-B10/20-TKS6 Main Features Capacity27 KW Temp.90 °C Specified Features - Temperature control unit Temperating machinecheck Water heatercheck Heating medium:water Heating capacity27 KW Electric capacity29 kVA Temperature90 gr.C Motor0,9 KW 400 Volt With temperature controllercheck With jacketcheck General Mach.No.080137 Year of construction2008 Mounted on wheelscheck With switchcheck Floorspace1,1x0,4 M Total height0,9 M Weight120 KGOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAn ...

Single jacketed tank with an propellor agitator. Volume: liter. Motor of the propellor agitator: 0,18 kW - 380 V - 50 Hz - 420 rpm. Stainless cover of the motor. Manhole with breather on top. Level indicator in top. Spraybowl for CIP cleaning. 3 legs. Inlet from the side. Outlet in the bottom center. Internal diameter 46 cm, internal height 72 cm. Total dimensions: 48 x 48 x 150 cm., Type of Machine: Process tank, Volume: 120 liter, Double jacketed: No, Insulation: No, Type of agitator: From the top, out of hte center, placed propellor agitator, Motor of agitator: 0,18 kW, CIP Spray bowls: Yes, Manhole: Yes, Number of feet: 3, High / Low Level sensors: Yes, Internal diameter: 46 cm, Internal height: 72 cm, Total outside diameter: Ø 50 cm, Total outside height: 150 cm, Weight: 60 kg

Baguette Long Roller SM 380 S Capacity: min. 50 - max.1200 g with felt ribbons for soft doughs 3 feed rollers for more dough tension Rolling width: up to max. 750 mm only DGUV V3 tested by us Connection: 400V, 16A-CEE plug Used machine

CNC Control, -Transfer in current condition as seen -unchecked from stock -Manufacturer: Siemens -Type: Simatic Sinumerik 3M 6FC 3441-OFA-Z -Power supply: 1 -Control cards: 10 -Type: Sinumerik 03810 -Type: Sinumerik 03200 -Type: Sinumerik 03260 -Type: Sinumerik 03310 A/B -Type: Sinumerik 03320 -Type: Sinumerik 03840 -Type: Sinumerik 03160 -Type: Sinumerik 03830 -Type: Sinumerik 034 -Type: Sinumerik 03 -Dimensions: 550/320/H440 mm -Weight: 13 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schad Sintec, transformer type ISK-DK 30.32 -Output: 24VDC / 30.0A -Technical data: see photo nameplate -Dimensions: 230/170/H175 mm -Weight: 11.6 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schad Sintec, transformer type ISK-ST 630 -Input: 400V / 1.7A / 50-60Hz -Output: 230V / 2.74A / 630VA -Technical data: see photo nameplate -Dimensions: 130/120/H155 mm -Weight: 10.1 kg

Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: Keil, Keil-Single deburring machine with base -Drive: 3.0/2.0 kW / 3000/1500 rpm -Brush: Ø 200 mm, Ø 200-250-300 mm possible -Brush width: 60 mm, 20-40-60-80-100 possible -Dimensions: 800/800/H1210 mm -Weight: 110 kg

Mitre saw, saw unit right left, double mitre saw, crosscut and mitre saw, double end tenoner -Manufacturer: Emmegi, Pressta Eisele, double mitre saw type SINGLE 2 HM500 -Cutting length: 250 to 5000 mm -Saw units: 45° pivotable -Saw blade: Ø 500 mm -Cutting data 90°: Cutting height 350 mm Cutting width 160 mm -Cutting data 45°: Cutting height 260 mm Cutting width 125 mm -Dimensions: 5750/1220/H1700 mm -Weight: 1200 kg

Line chokes, line filters, frequency converters, drive inverters, line filters, Smart Line Modules, Basic Line Filters -Manufacturer: Siemens, Line choke Line Filter Sinamics for 36kW -Type: 36KW SLM/ALM / 40 KW BLM -Voltage: 3AC 380-480V, 50-60Hz, 74A -Number: 4x Line Filter available -Price: per piece -Dimensions: 415/75/H225 mm -Weight: 7 kg/piece

Sheeter Sinmag SM 520 F Easy manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400V, 16A-CEE plug Used machine

Dough sheeter with simple manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400 V, 16A-CEE plug Used machine & SAB tested Quality from a specialist company! Benefit from over 35 years of experience!

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - .ucymachines/ Contact us at - sales@ucymachines

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

Spiral mixer Sinmag KM-25 Condition: used, functional Year of Make: 2017 Suitable for max. 12.5 kg flour or 25 kg dough Stainless steel boiler and spiral Automatic timer Two timers Two speed settings Digital control Reverse Mobile with brake

Spiral mixer Sinmag KM-50T Condition: used, functional Year of Make: 2011 Suitable for max. 25 kg flour or 50 kg dough Stainless steel boiler and spiral Automatic timer Two timers Two speed settings Digital control Reverse Mobile with brake

General SKU004K022 MakeKraftanlagen Heidelberg LocationBarneveld TypeST-350/6D Main Features Motor180 KW Inlet diameter350 mm L/D6 Specified Features - Single screw extruder Single screw extruder:Pin extruder: Screw diameter350 mm L/D6 With jacketcheck DC-motor180 kW (400 V) + 53,7 kW (400 V) Inlet350 x 285 mm Screw can be heatedcheck MaterialMild steel With jacketcheck General No.91.02 4295916 Year of construction1991 Without switchgearcheck Floorspace5,5 x 1,7 m Total height2,0 m Weight11.000 kg Extra Specifications- With die head for 167 strands - With die face cutter - Extruder can be used for PVCRubberPlastic & polymersSingle screw extrudersDiscountPlastic & rubberNew arrivalsHeidelberg KrafIndustries > Chemical > RubberIndustries > Chemical > Plastic & polymersExtruders > Single screw extrudersDiscountIndustries > Recycling > Plastic & rubberNew arrivalsB ...

Spiral mixer Sinmag SM 120 T with return Dough machine with 2 timers 2 gears, boiler left & right for min/max. 9 - 120 kg dough Flour dust hood Stainless steel boiler and spiral Machine mobile Connection 400V, 32A-CEE plug Dimensions: 750 x 1230 x 1400/1920mm, WxDxH Used machine Visit our large warehouse!

Very good condition

General SKU291N360A MakeSingle Temperiertechnik GmbH (D) TypeSTO1-18-25-S Mach.No.83918 Year of constructionunknown Main Features Heating (medium)Electric Capacity18 KW Specified Features - Temperature control unit Temperating machinecheck Electric heatingcheck Heating medium:thermal oil Heating capacity18 kW Electric capacity20 kW 380 Volt With pumpcheck Motor1.5 kW (380V 2800 rpm) With temperature controllercheck MaterialMild steel General LocationBarneveld Mounted on wheelscheck With switchcheck Floorspace0,8x0,5 M Total height0,8 M Weight140 KgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood add ...

Very good condition

Very good condition

CONTROLS   CNC controls SLM ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2600 mm   space requirements -front/back-: 1200 mm   total height: 2700 mm 3D metal printer Machines in excellent condition serviced annually by the manufacturer (service reports available). ... Accessories: - HRS050 L/W cooling package, - PSM100 V3 sieving station, - BPH280 handling unit and bottle lift, - Material change kit, - SLM280 2.0 complete including PSM100, - Powder hopper, - Substrate plates (1.2709 & AlSi10Mg), - Additional filter housings and filter elements, etc. Build volume: 280 x 280 x 365 mm minus substrate plate height Machine configuration: Single optic, 1 x 700W Build rate: up to 113 cm³/h (material dependent) Laser lifespan: 1500 h Variable layer thickness: 20 μm - 90 μm Min. feature size: 150  ...

Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

General SKU291Y484 LocationBarneveld MakeMaso Main Features MaterialStainless steel Motor1.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 With motor1,5 kW, (400 V, 1430/139 rpm) InletDia. 65 mm OutletDia. 65 mm General TypeSPS-2,5” Mach.No.101920104 Mounted on framecheck Floorspace1,1x0,3 m Total height0,45 m Weight250Oils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersFeed additivesOrganicsSolventsEccentric Screw PumpsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIMasoIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicinesIndustries > Pharmaceutical > OintmentsIndustries > ...

General SKU291Y510 MakeMaso TypeSPS 4” Mach.No.54300196 Year of constructionUnknown Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume37800 Ltr. Motor11 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity37,8 m³/h With motor11 kW (400 V, 1460 rpm) With frequency inverter(max. 319 rpm) InletDia. 100 mm OutletDia. 100 mm Eccentric Screw Pumps MaterialStainless steel 1.4435 (316L) General Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchgear( as is) Floorspace1,7x0,4 m Total height1,3 m Weight500 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersFeed additivesOrganicsSolventsEccentric Screw PumpsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectione ...

General SKU291Y519 MakeMaso TypeSPS-4” Mach.No.31260692 Year of constructionUnknown Pressure Working pressure15 Bar Main Features MaterialStainless steel Volume37800 Ltr. Motor11 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity37,8 m³/h With motor11kW, ( 400 V, 1450 rpm.) InletDia. 100 mm OutletDia. 100 mm Eccentric Screw Pumps MaterialStainless steel 1.4435 (316L) General Mounted on framecheck LocationBarneveld Floorspace1,6 x 0,6 m Total height0,6 m Weight450 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersFeed additivesOrganicsSolventsEccentric Screw PumpsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesLubricants & oleoDairyAnimal feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIMasoIndustries > Fo ...

General SKU291Y534 LocationBarneveld CEcheck Pressure Working pressure10 Bar Main Features Heating (medium)Electric Capacity18 KW Temp.300 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heatercheck Electric heatingcheck Heating medium:thermal oil Heating capacity2x 9kW = 18 kW Electric capacity22,3 kW 400 V With cooling( no cooling compressor) Capacity2 × 48 700 W = ± 97,4 kW Temperature300 °C Tank capacityinternal: 2x 7 l., external: 2x 29 l. With pumpcheck Capacitymin. 1 m³/h Motor2x 2.3 kW With temperature controllercheck With controlcheck MaterialMild steel General MakeSINGLE Temperiertechnik GmbH TypeSTO 2-9-42-D1 Mach.No.961599 Year of construction1996 Mounted on wheelscheck Floorspace1.6 × 0.6 m Total height1.4 m Weight450 kg Extra Specificationswith two independent circuitsOils & fatConsumer wastePa ...

General SKU315Y649 LocationBarneveld MakeIMAX T&:E TypePharma Press I Main Features Tablet Diameter14 mm Specified Features - Single stroke tablet press Single stroke tablet presscheck Tablet diameterø 2 — 14 mm With hoppercheck Capacity5.500 pill/h With motorcheck Material1.4713 (Sicromal 8 / X10CrAlSi7) General No.- Floorspace0,47 x 0,4 m Total height0,86 m Weight100 kgGeneric medicinesConfectionerySolid pharmaceuticsSingle stroke tablet pressesIMAX T&EIndustries > Pharmaceutical > Generic medicinesIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsPresses > Single stroke tablet pressesBrand > IMAX T&E What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...

Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max.  ...

Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Please visit our at Foeth[dot]com for more information about this machine. What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU291Y828 MakeMaso TypeSP-2:: Mach.No.111 05 0205 Main Features MaterialStainless steel Volume1200 Ltr. Motor1.5 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity600 - 1200 l/h With motor1,5 kW (220/415 V 1465/430 rpm) InletDN50 OutletDN50 Eccentric Screw Pumps MaterialStainless steel 1.4401 (316) General LocationBarneveld Floorspace0,9 x 0,21 m Total height0,3 m Weight100 kgPaints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesEccentric Screw PumpsDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicMasoIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed ...

Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible.

Key data: 500 mm, 200 mm

Magnetic clamping plate with sinusoidal ruler swivel device. Top condition! Dimensions : 500x200mm, Clamping: 110V - Made in Germany

Temperature Control Unit, Empty weight 458 kg, 6,9A; sizes 2000x500x1200mm height.

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

This is an industrial meat mixer designed for efficient and uniform mixing of meat blends and other food products. The 450-liter bowl capacity and a batch output of 280 kg ensure high productivity in the meat industry and food processing facilities. Thanks to its stainless steel construction, the unit meets strict hygienic standards, is easy to clean, and guarantees long-term durability in operation. Technical characteristics Bowl capacity: 450 liters Batch output: 280 kg Bowl material: Stainless Steel (Inox) Power supply: 380 V / 50 Hz / 3P Connected power: 4.4 kW Dimensions (L x W x H): 1400 x 830 x 1350 mm

Industrial Paddle Mixer is designed for efficient and uniform mixing of meat blends and other food products in industrial environments. The 300-liter bowl capacity and a batch output of 200 kg ensure high productivity in the meat industry and food processing facilities. Its robust stainless steel construction guarantees durability, reliability, and compliance with strict hygiene standards. Technical characteristics Bowl capacity: 300 L Batch output: 200 kg Bowl material: Stainless Steel (Inox) Power supply: 380 V / 50 Hz Connected power: 3 kW

x-travel:800 mm y-travel:400 mm z-travel:350 mm total power requirement:44 kW weight of the machine ca.:8,8 t dimensions of the machine ca.:6,1 x 4,1 x 3,3 m tool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St. rotary table diameter:1340 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

Laser system consisting of Jenoptik laser JOL-D8.1-S, Nd:YAG beam source ILZ LBS 02/C (10 W cw, 10 kW Q-switch), as well as Raylase scanner RS-10-Y-Dig2. Jenoptik JOL-D8.1-S, year 2002, serial number 0211902; ILZ LBS 02/C, year of manufacture 2003, serial number 8027; Raylase RS-10-Y-Dig2, serial number 03321794; wavelength 1064 nm, cw 10 W, Q-switch 10 kW, T 70 ns, up to 50 kHz. Auction-ID: A7-49816-120

ILLIG RDM 70K PP/ PS Cup Mold, manufactured by Marbach, 77 mm cut dia., 14-Cavity Inclusive of stacker Parts

Optical fiber, connection technology, EFO units, illuminator -Manufacturer: Fiberstars, EFO-1 1 Illuminator -Power: 68 W -Price: per piece -Number: 4 Stück -Dimensions: 340/510/H165 mm -Weight: 4.7 kg/piece

Auction-ID: A1-49790-1022

Auction-ID: A7-49327-10

Auction-ID: A1-49790-1241

Auction-ID: A1-49790-1081

Auction-ID: A1-49818-1241

Auction-ID: A1-49818-1022

Auction-ID: A1-49818-1081