141,112 used machines on RESALE, but how to find them? Machine Search
Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 420 mm -Item No.: 829676.44-01 -Groove width: 37 mm -Hole: Ø 70 x 55 mm -Quantity: 1x pulley available -Dimensions: Ø 420 x 50 mm -Weight: 20.1 kg
Rope pulley, pulley sheave, rope pulley cover, rope sheave cover set -Manufacturer: Demag, pulley, rope roller, 1 grooved, Ø 330 mm -Groove width: 32 mm -Hole: Ø 110 x 45 mm -Quantity: 1x pulley available -Dimensions: Ø 330 x 45 mm -Weight: 18.2 kg/pc.
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode / parts changer: Erowa UPC 5 position, ITS 72 - 90 position, ITS 148 - 15 position cooling device for diale
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
HOBART Belt Dishwashing Machine 612/440 FTNi-S-A (Smartronic) 261584 Serial No. 867710440 Item description: Year of manufacture: 2015 Meter reading: 2760 The belt type dishwasher was in use until 2024 and was used little. It has minor signs of wear due to age. When the machine is switched on, the RCD. The belt type dishwashing machine would require the following spare parts before commissioning: 1x PLUG FLUSH ARM BLUE, 4x DOOR ROLLER SPRING KPL., 4x CURTAIN LONG 612/440, 3x CURTAIN MODULE SEPARATION, 1x CURTAIN DUO 612/440, 2x SPECIAL SWIMMER W. MAGN, 2x GASKET 27-16, 2x RADIATORS 254V/2X3050W, 3x BLIND PLUGS WITH GASKET, 4x O-RING 1x FREQUENCY CONVERTER SENSOR 2x KIT PUMP SEAL SET 2x KIT 10x FINGER TAPE RAKE 1x PURGE PUMP 1x RUBBER TRAY BLOWER Dimensions (length): approx. 7.15 m Pick-up: Dismantling and collection at the expense of the buyer. Vi ...
Generator: MGF2 Max. Travel range: X 450mm, Y350mm, Z 350mm, C yes Clamping of tool: Erowa System ITS Clamping of parts: Erowa Sysem UPC Electrode / parts changer: Erowa UPC 10 position, ITS 72-90 position Cooling device, fire extuiguishing
Generator: MGF max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts: Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erowa ITS / UPC Er
Generator: MGF2 max.travel range: X 450mm Y 350mm Z 350mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero
This 3-axis ONA NX6 die-sinking EDM machine was manufactured in 2007. It features a working table dimension of 1,000 × 700 mm and an impressive X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 400 mm. With a maximum table load of 4,000 kg, this machine is designed for high-quality machining capabilities. If you are looking to get high-quality die-sinking capabilities, consider the ONA NX6 machine we have for sale. Contact us for further details.
This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details.
Generator: MGH max.travel range: X 800mm Y 500mm Z 400mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 32 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Erow
Generator: MGH5 max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Er
This 3-axis TOPEDM TSH-400N die-sinking EDM machine was manufactured in 2005. It features a working area of 400 x 400 x 440 mm and a table size of 480 x 458 mm. The machine is capable of drilling holes with diameters ranging from 0.15 to 6.0 mm. If you are looking to get high-quality hole drilling capabilities, consider the TOPEDM TSH-400N machine we have for sale. Contact us for further details.
This 3-axis CHARMILLES Roboform 35 was manufactured in 2004. It features an X travel of 350 mm, Y travel of 250 mm, and Z travel of 300 mm. The machine has a table size of 500 × 400 mm and can accommodate workpieces weighing up to 500 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 35 machine we have for sale. Contact us for further details.
Generator: MGH max.travel range: X 450mm Y 300mm Z 320mm C yes Clamping of tool: Erowa System ITS Clamping of parts:Erowa System UPC Electrode changer: Erowa ITS 72 - 16 position cooling device for dialectricum, fire extinquisher, RS-232 connection, Ero
Single Shaft Shredder "Obsolete" Propulsion: 37kW Hydraulics: 1.5kW Rotor diameter: approx. 400 48 rotor blades 3 stator knives Incl. segment floor
This 3-axis Sodick AG40L LN2 was manufactured in 2015. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 270 mm. The machine has been operated for 13,161 hours and is currently connected and available for inspection/testing. If you are looking to get high-quality die-sinking capabilities, consider the Sodick AG40L LN2 machine we have for sale. Contact us for further details.
This 4-axis INGERSOLL Gantry 400 was manufactured in 2005. It features a main voltage of 400 V and operates at a frequency of 50 Hz. The machine is equipped with a Multipulse64 control system, ensuring precision in die-sinking applications. If you are looking to get high-quality die-sinking capabilities, consider the INGERSOLL Gantry 400 machine we have for sale. Contact us for further details.
- Automatic horizontal molding line for green sand casting. - Production capacity up to 120 moulds/hour. - Sand consumption 72 Tons/h. - Weight of the pieces: from 20 kg to 100 kg. - Includes: - SEIATSU ACE 5 automatic molding machine (air stream and high-pressure pressing). - Molding box size: 900 × 700 × 230/230 mm. - Nominal production of the molding machine: up to 140 full molds/hour. - Automatic model change. - Hydraulic system and programmable electronic control. - Manual placement line for taps and hammers. - Automatic mold closing system. - 3 ton casting bucket with automatic checkweighing system. - Transport of moulds by means of trolleys on rails. - 5 cooling lanes with capacity for 36 molds each. - 3 streets with forced ventilation and 2 streets with natural ventilation. - Automatic track change transferors. - Rotary trommel for demoulding and sand separatio ...
X, Y, Z Travel :600x400x400 mm Machine dimentions WxDxH : 1600x2700x2858 mm Machine weight :440 kg Workpiece dimentions WxDxH :1000x700x400 mm Max. electrode weight :100kg Max. Workpiece weight 1000 kg Can be inspected under power
Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 147 tons
Lindner Micromat MS 2000 Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: approx. 80 rpm at 50 Hz. Rotor blade: 104 pcs. New Rotor blade shape: 43x43x19.5 mm Infill opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Wiper comb:yes Counter knife: yes Hydraulic power unit: complete Hydraulic cylinder sieve cassette:sieves 50x50 mm Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x2970 x 2660 mm Viewing and trial run possible by appointment. incl. funnel Shipping time: immediately
Doppstadt DW 3060 Büffel - Year of construction 2012 - Running hours 5232 - Engine Mercedes Benz overhauled - AD Blue - Hydraulic drive (self drive) -Remote control - Overbelt magnet Machine is overhauled and immediately available
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22409 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 350 GammaTec Year of construction: 2006 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece weight: 500 kg Electrode changer: 16-fold C-axis
Key data: 500 mm, 400 mm
Type: Die-sinking EDM machine Ident Number: 22607 Category: Die-sinking EDM machines / EDM Manufacturer: Charmilles Model: ROBOFORM 35P Year of construction: 2002 Travel: 350 x 250 x 300 mm [ X x Y x Z ] Table size X: 500 mm Table size Y: 400 mm max. workpiece size X: 780 mm max. workpiece size Y: 400 mm max. workpiece size Z: 300 mm max. workpiece weight: 500 kg max. electrode weight: 50 kg Tool changer: 16-speed C-axis Generator: 64 amps lowerable container Erowa ITS50 Clamping Head
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22605 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AG 60 L Year of construction: 2012 Travel: 600 x 420 x 370 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm max. workpiece weight: 1500 kg Electrode changer: 6-fold Control: LN2 Quill clamping fixture: EROWA ITS Working container: 950 x 740 x 450 mm
This 3-axis Makino EDNC 43T was manufactured in 2006. It includes an EROWA loading robot with 150 pots, ensuring efficient die-sinking EDM operations. Consider the opportunity to buy this Makino EDNC 43T die-sinking EDM machine. Contact us for more information.
This 4-axis HUBER River 600 CNC was manufactured in 2017. It features a traverse of 600 x 400 mm in the X and Y directions, and a Z-axis travel of 300 mm. The machine accommodates electrode diameters ranging from 0.3 to 3.0 mm. If you are looking to get high-quality small hole drilling capabilities, consider the HUBER River 600 CNC die-sinking EDM machine we have for sale. Contact us for further details.
Key data: 750 mm, 550 mm
Type: Die-sinking EDM machine Ident Number: 22603 Category: Die-sinking EDM machines / EDM Manufacturer: Sodick Model: AQ 55 L Year of construction: 2007 Travel: 500 x 400 x 350 mm [ X x Y x Z ] Table size X: 750 mm Table size Y: 550 mm Electrode changer: 32-fold Working basin: 950 x 725 x 410 mm Quill clamping fixture: EROWA
Key data: 50 mm, 30
Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time
Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...
Pressing force: 63kN, stroke: 300mm, motor power: 7.5kW, on-site inspection is possible.
Key data: 35 mm, 25 , 107 U/min
used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available
Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.
Carriage 3,80 m. Motor power: 7,5 kW Saw-blade tilting: 0° bis 45° Cutting height: max. 157 mm with sawblade Ø 500 Rotational speed: 3000 - 3600 - 4200 rpm Cutting width: 1300 mm Scorer with 2-axes electrical positioning Ripfence with motorised postioning
Carriage 3,30 m. Motor power: 5,5 kW Saw-blade tilting: 0° bis 46° Cutting height: max. 87,5 mm with sawblade Ø 315 Saw-blade diameter: 250 - 400 mm Rotational speed: 4000-4800-6000 rpm Cutting width: 1250 mm Scorer with 2-axes electrical positioning Ripfence with motorised postioning
Table: 825 x 1140 mm Extendable workpiece support Spindle diameter: 50 mm Spindle length: 210 mm Vertical spindle travel: 190 mm Maximum profiling tool diameter: 200 mm Maximum tenoning tool diameter: 320 mm Motor 5.5 kW Incl. side-mounted tenoning carriage 5 speeds: 3500 - 6500 - 8000 - 10000 rpm
Single shaft shredder with 1350 mm shaft, hopper 1350 x 1100 mm, motor 37 kW, all bearings new. Extremely robust construction. Slow runners.
Lindner Antares 1600 Year of construction: Oct. 2019 Operating hours: 2 h Drive motor : 75 kW ,400 V/50 Hz Control cabinet: complete star/triangle Rotor speed: at 50 Hz approx. 100 rpm. Rotor blades: 40 pcs. Sieves: 30 mm round Rotor blade shape: 65x65 mm Filling opening: LxW 1567x 1355 mm Filling volume: approx. 3.2 cbm Rotor length: approx. 1600 mm Total weight approx. 8500 kg Dimensions LxWxH mm: approx. 3394 x 2330 x 2231 mm Total height with hopper: 2931 mm Hydraulic power unit: 4 kW Viewing and test run possible by appointment. incl. funnel Delivery time: immediately available OPTIONAL: 1x Feed Conveyor Overall length:. 7000 mm, at 25° Belt width with driver: 1800 mm Discharge height: approx. 3000 mm Propulsion : 3 kW NORD Max. load: 100 kg/m2 1x discharge belt with climbing part Overall length:. 8000 mm, at 35° Belt width with driver: 650 mm Wo ...
Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100
21x box Nexans single core cable 0.5mm 100mtr Auction-ID: A1-50936-64
Hobart FTN Belt Transport Dishwasher For sale is a professional, modular HOBART belt transport dishwasher from the proven FTN series. It was specially developed for commercial kitchens, hospitals and canteens to clean immense quantities of dishes, trays and cutlery quickly and resource-efficiently. The plant was professionally dismantled for dismantling and transport. Since the nameplate was lost in the course of use, the model was identified as the Hobart FTN series based on the components, dimensions and controls. It is an extremely robust, purist model, which is operated directly decentrally via the push buttons on the tunnel hoods (no vulnerable central display). Zone division (from left to right): 1. Infeed zone with drive shaft for the finger strap and manual start/stop operation 2. Pre-wash zone for rough cleaning 3. Main washing zone for intensive hot cl ...
PLC, control panel, operator panel, control machine -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS -Type: Sinumerik 810D/840D PCU50 -Dimensions: 482/310/H140 mm -Weight: 11.5 kg
Die-sinking EDM machine manufactured in 2010. This AgieCharmilles FORM 30 features a table length of 800 mm and a table width of 600 mm. It offers an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles FORM 30 machine we have for sale. Contact us for further details.
Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details.
maximum number of results exceeded
please refine your search
200.000 € 
