iem used for sale

was connected to Gildemeister GMC 20

Spindle circle 165 mm Interface Gildemeister GM 16 AC

IEMCA model 33 lathe bar loader

Rod diameter 8 - 80 mm Rod length 1,000 - 2,100 mm Connection power 5 kVA Machine weight 950 kg

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up up to: 32 mm Length of bars max.: 3000 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 4000 mm Width: 800 mm Height: 1700 mm

Technical data Bar diameter round up: 3 mm up to: 25 mm Length of bars max.: 3200 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 4000 mm Width: 600 mm Height: 1600 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 65 mm hexagon up: 5 mm up to: 56 mm Length of bars max.: 3750 mm Execution: Horizontal Voltage 50 Hz 3x: 200 Volt Power: 2 kW Machine´s weight about: 1450 kg Overall dimensions machine: Length: 5840 mm Width: 732 mm Height: 950-1100 mm

Capacity: For bars from 5 to 42mm Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.

Used Iemca ts 560 p Bar feeder Visible in Italy sold as it is

Delivery ready Located near Brescia northern Italy Regione: Lombardia

Rod diameter 65 mm rod length 3200 mm

type L21 80 x 3800 mm - single-storey warehouse Dimensions 4900 x 750 x 1700h mm - Weight 1440 kg Year 2008 Available January 2024

Manufacturer IEMCA Model Master 80 Year of manufacture 2016 Bar Feeder, very good condition

Bar loader make Fabr. IEMCA type AS 325/32Machine -No: 87041309 Year 1987Rod sizes from: 3-25 mmBar length max .: 3210 mmMagazine capacity (eg 30 x 10 mm): 300 mmFeed rate: 200-600 mm / sec.Drive power: 1.0 kWWeight approx: 530 kgOutside dimensions approx: 4470 x 460 x 1500 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Max. bar length: 3000mm, weight: 900kg, the machine is wrapped in foil and not in use.

- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Loader applicable to all types of CNC lathes, with fixed or sliding head. The TS560 series automatic loaders are characterized by a very silent operation and a large capacity bar magazine. They can be connected to automatic and CNC lathes, with fixed and sliding headstock, and to any machine working the bar (transfer, cutting-off machines, presses, etc.) even with special profiles; they are particularly suitable where large quantities are required. The TS 560 P loaders are equipped with a magazine with 4 eclipsable overlapping shelves (max. Capacity 1800 mm.), L max [mm]: 3.300

Stock number: 3765 BAR FEEDER - LOADING MAGAZINE Manufacturer: IEMCA, Type: VIP 80 II - 16 Machine NO.: 0207370a01, Year of construction: 2007 Specifications: Max. Stang dia. 80 mm Min. Stang dia. 5 mm Stang length 1400 mm Length: 1900 mm, Height: 1500 mm, Width: 1000 mm, Weight: 520 kg

Was fitted on a Gildemeister Sprint 65

27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details

Inv. Num. : 6976 Type: BOSS 545/E type 32L Producer: IEMCA Created: 2005 Parameters: Maximum rod length: 3200 mm Rod diameter: 5-45 mm Weight: 850 kg

Key data: 4200 mm, 25 mm, 25 mm

Bar feeder for multi-spindle lathe 8 spindles last attached to Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Bar Loading Magazine/Tal AUTO 65-32 LxWxH approx. 5000x1000x1500mm Weight approx. 600 kg Control via CNC machine (was mounted on a Traub-CNC machine) B0doi8oziq Rods diameter approx. 5-65mm Pole length approx. 4 meters Height adjustment approx. 1000-1300mm Power supply 380 volts Max. feed travel approx. 4000mm Max. rod weight approx. 150 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 700 mm -Conveying length: 4700 mm -Diameter roller: 80 mm -Center distance: 105 mm -Height: mm -driven: via belt -Geared motor: 0.55 kW -Speed: 13 m/min -Dimensions: 4700/1100/H470 mm -Weight: 315 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor -Roll width: 700 mm -Conveying length: 5020 mm -Diameter roller: 80 mm -Center distance: 100 mm -Height: mm -driven: via belt -Geared motor: 0.55 kW -Speed: 12.6 m/min -Number: 1x roller conveyors available -Price: per piece -Dimensions: 5380/1050/H450 mm -Weight: 450 kg

Roller conveyor, conveyor track, roller conveyor belt, roller conveyor -Roll width: 700 mm -Conveyor length: 5450 mm -Diameter roll: 80 mm -Center distance: 100 mm -Height: mm -driven: via belt -Gear motor: 0.55 kW -Speed: 12.6 m/min -Number: 1x roller conveyor available -Dimensions: 5450/1040/H480 mm -Weight: 400kg

- Guide channel in oil-damped design, - was attached to TRAUB mechanically - Installed guide channel D 28 mm - Material slider length N - max. bar length 3,200 mm - Centering device - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm

- Max. bar length: 1,615 mm depending on the spindle of the automatic lathe - Material Ø: 5-80 mm - Material contact surface: 650 mm - Dimensions LxWxH: 2260 x 1200 x 1400 mm - Weight approx. 600 kg

This IEMCA Master 80 Bar Feeder was manufactured in the year 2016. The machine is barely used. There are 2 units available of the same model available. Both bar feeder were connected to identical Index C200 (YOM 2016 with Unimag 4 interface). They have a bar capacity of 80mm. Bar feeder #1 is at 7,500 and Bar feeder #2 at 8,000 production hours. The Master 80 HF is recommended for frequent unloading (even multiple times a day) needs, catering to a wide range of bars (e.g., from Ø 15 to 80 mm), accommodating both hexagonal and square materials, and for those seeking the convenience of a loader without manual adjustments required.

TAKAMAZ LX 15 + IEMCA TAL 65/32 bar feeder Machine completely overhauled in 2018 (8500 hours worked since 2018) Very good condition

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

Description: Nominal capacity 1500 kg ,, A 500 mm B 3030 mm , Weight without battery 2380 kg Battery weight 700 kg Fork length 1500 mm , Including charger : Manufacturer EB, D400 g 48 / 80 B1 - FML Puls , Battery charger 48 Volt UE 400 Volt IEM 8,0 Ampere 50-60 Hertz A truck with an access ramp will be ordered for collection Approx. Onsite Dimension. (l x w x h): 2,500 x 1,500 x 2,000 mm, weight approx.: 3,030 kg

2 sit-top rotary plate machines EUBAMA S 20/10, loading magazine IEMCA TS 560, KNOLL spaenefoererer with hydraulics, linear foerderer with screw unit WEBER, and much more; see pictures

2 pcs rotary actuators EUBAMA S20/10, each with rod loading magazine IEMCA T560, Spaenefoerderer KNOLL, hydraulic unit, linear supply WEBER, with part washing system Turbex 2000, spaen crusher system ARBOGA and much more

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 18i-T Operating hours: 11069 Technical data Number of spindles: 2 Number of revolvers: 2 Distance spindle nose: 560 mm Turret slide: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 6 Driven tools turret 2: 6 Spindle speeds: 100 - 3000 rpm Tool shank cross section: 20 mm Power of driven tools: 1.5 / 3.7 kW Max. drill capacity: 25 mm Indexing time: 0.4 sec Upper turret head: X axis: 175 mm Z axis: 305 mm Lower turret head: X axis: 132 mm Y axis: 340 mm Z axis: 155 mm Main spindle: Spindle nose: ASA 5" Spindle hole: 52 mm Inner taper type: DIN 6343 Max. bar diameter: 41 mm Max. turning diameter: 200 mm Maximum turning length: 300 mm C axis (spindle,resolution): 0.001 ° Spindle speed ...

Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Machine Details Stock-No. 1105-03886 Type of machine CNC Lathe Make MAZAK Type QT 20 N Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time short-term Freight basis ex works Price Technical details turning diameter 440 mm turning length 451 mm control Mazatrol T PLUS turning diameter over bed slide 300 tailstock taper MT 4 Quill Stroke 130 mm tailstock adjustment 500 mm X-AXIS 180 mm Z-AXIS 510 mm Spindle Bore 62 mm turning speed range 12-4500 rpm total power requirement 40 KVA Weight of the machine approx. 4.2 t Additional information NICE MACHINE WITH BAR FEEDER IEMCA SERCI III

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1980 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Gv29e0 Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without ro ...

Technical specifications: Useful length 192 mm Max. Working diameter 215 mm Spindle revolutions 50-5000 rpm Spindle useful diameter 65 mm Number of tools 2 x 12 pcs Number of rotary stations 1 x 12 pcs Spindle revolutions of rotating tools 48-3600 rpm Axis path 195mm With 3 m Iemca brand charger.

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past

Schuette Multi-spindle rotary machine Name: Schuette SF 20-6 Curve controlled Number of spindles: 6 Built: 1984 max. rod diameter: around 20 mm SW 17 mm AK 18 mm VK 14 mm max. rod feed: 80 /(160) mm Number of independent Laengsschlitten: 6 Total / working distances (stand): 63/40 mm " " (special) up to: 100/63mm Number of independent cross slides: 6 Total/ work routes Medium and top slide up to: 32/20 mm Slide up to: 40/25 mm Spindle circle diameter: 224 mm Main times min/max.: 0.36/150 sec. Off times min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 rpm in the 2nd area: 355-2000 rpm Rated power of the drive motor: 15 KW Connected power: 50 kVA Drive engine speed: 1500 rpm Length Width (in standard performance) 3705 1320 mm incl. rod guide (in standard output) 6335 mm Weight without rod guide a ...

CNC slot machine Gildemeister GLD 25 with counter spindle Technical data: Manufacturer: Gildemeister Type: GLD 25 Built: 1999 Control: FANUC Series O-T Main spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (Z-axis): 160 mm Counter spindle: - max. turning diameter: 25 mm - max. speed: 8,000 rpm - maximum stroke (C-axis): 265 mm - Rapid speed C-axis 15 m/min Sled: - Slide: X= 30 mm, Y= 220 mm - Rapid x-axis 10 m/min - Rapid y-axis 15 m/min - Number of WZ on the sled: 5 + 3 (driven) - Speed WZ (driven) : 6,000 rpm Accessories: - Chip conveyor -Bar loader: IEMCA MINI BOSS 325/32 Dimensions LxWxH: - Machine with chip conveyor 3150 x 1100 x 1700 mm - Bar loader 3900 x 800 x 1400 mm Weight: - Machine: approx.2000 Kg - Bar loader: approx. 1000 kg. - Total weight: approx. 3,000 kg

Spindle 1: 20 kW - 5000 rpm Spindle 2: 17 kW - 5000 rpm Turret 1: 12 driven tools - 2,5 kW - 4000 rpm Turret 2: 12 driven tools - 2,5 kW - 4000 rpm Driven C-axis / Driven A-axis X1 movement: 165 mm X2 movement: 165 mm Y1 movement: 50 mm Z1 movement: 678 mm Z2 movement: 640 mm Iemca Master 880 P barfeeder Swing over bed: 70 mm Distance centre tot centre: 950 mm Dia of spindle bore: 70 & 42 mm Power on the spindle: 20 & 17 kW Number of speeds: 5000 rpm Command: Fanuc 310i Length: 4500 mm Width: 1990 mm Height: 2300 mm Weight: 10 ton Toolchanger: yes (2x) Number of tools: 12 tools (2x)

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 21070 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: MITSUBISHI Meldas 70V Operating hours: 23009 Technical data Number of axis total: 5 + 2 Number of spindles: 2 Max. turning diameter: 16 mm Maximum turning length: 200 mm Max. drilling diameter: 10 mm Max. threading diameter: 8 M (Metric) Internal spindle diameter: 20 mm Spindle speeds: stepless from: 200 rpm up to: 15000 rpm Back spindle: speeds: from: 200 rpm up to: 10000 rpm Thread drill diameter: 5 M (Metric) Tool-holder: Turning tools: 6 pce Drilling tools: 4 pce Transverse processing tools: 4 Spindle speeds (turning tools): 6000 rpm Counter-operation: Drilling tools: 4 pce Voltage 50 Hz 3x: 400 Volt Total power required: 7 kVA Machine´s weight about: 2250 kg Overall dimensions machine: Length: 2020 mm Width: 1070 mm Height: 1680 m ...

Maximum machining diameter : 20 mm Maximum spindle speed : 10.000 rpm Fanuc control unit Iemka bar feeder 8+2 axis

Index MS 18C Multispindle automatic lathe Double NCU SIR25 IEMCA bar feeder Machine can be seen in working condition