ice tec used for sale

center hole: 2-50 mm workpiece diameter: 8-125 mm workpiece length - min.: 50 mm workpiece length - max.: 1000 mm column - center height: 145 mm grinding wheel speeds:: number: 3 from/to: 13000-45000 U/min spindle turning speed range: 400 U/min dimensions of the machine ca.: 750x850x1800 mm weight of the machine ca.: 475 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 35 (800) mm : 35 (1200) mm L-beam: 50 x 50 x5 (850) mm flat steel: 60 x 10 (800) mm Axis diameter: 50 mm work speed: 4,5 m/min roll diameter -toolpieces: 155 mm total power requirement: 1,5 kW weight of the machine ca.: 0,9 Kg dimensions of the machine ca.: 0,6 x 0,9 x 1,35 m Profile bending machine with: - Foot pedal for right/left rotation - 1 set of standard rollers - 2 rollers are driven - Horizontal or vertical operation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 5500 mm gear width: 1500 mm max. module: 32 faceplate diameter: 3740 mm swing diameter: 6200 mm turning height: 1200 mm control: FANUC 31i MODEL B : 1250 mm cross rail - adjustment: 3000 mm turning speeds: 3-15 U/min spindle turning speed - stepless: 15 - 1500 U/min workpiece weight: 39,4 t max. dia. of teeth cutting: 5500 mm tooth width: 550 mm module: 32 cutter speeds: 10 -150 U/min milling cutter dia. x width: 450 x 110 mm milling head axial adjustable: 2060 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Complex TurnMill & Gear Cutting Machine - CNC control FANUC 31i B - Turning and Milling Function - ATC - Angular Milling Head - Gear Hobbing (internal and external) - Chip Conveyor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25128 Specifications: - Rated power at 50% ED 25 kVA - Max. welding power 68 kVA - Adjustable projection 280 to 450 mm - Stroke 5 to 40 mm - Welding values of sheet steel approx. 3 + 3 mm - Electrode force adjustable up to 240 daN - Required air pressure 6 bar - Cooling water volume 4 l/min - Connection 400 V - Space requirement approx. W 800 x H 1700 x D 1050 mm - Weight approx. 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling unit

X,Y travel: 14.6" x U,V,Z Travel: 3.9" x 3.9" x 10.2" Max. workpiece size: 29.5" x 21.7" x 10.2" Max. workpiece weight: 880 LB Max. X, Y rapid traverse: 31.5 in/min Motor Drive System AC Servo Motor/Linear Motor Wire Diameter: 0.004" – 0.012" Max. wire feed: 11.8 in/s Wire tension: 0.44 – 5.52 lb taper angle : ±21°/4.33 inches (DA+DB=0.6 inches) Layout (W x D x H) 90.6" x 89.2" x 80.6

Equipment: Insulation,Manufacturer: Priamo Food Technologies,Condition: used,Volume: 100,000,Design: upright,Stand shape: Standing frame,Insulation: present,Insulating jacket: hermetically welded,Diameter inside: 3,600,Diameter outside: 3,810,Cylindrical height: 10,000,Total height: 11,454,Year of construction: 2019,Manhole / dome: in cylinder,Nameplate: Yes,Outlet: present,Remarks: Manhole Dimensions: 542 x 442 mm Outlet has been separated,last use: food, Material in contact with the product: V2A 1.4301 (AISI304),Bottom bearing: No,Current interferer: No,Floor bearing: No,Current interferer: No

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

vibrating screen, used, reconditioned, vibrating surface 1.400 x 480 mm., height from floor 900 mm., 2 ways out: 1st screen 8 mm Ø to separate clogs, 2nd for good material

TECOM BLOWN FILM EXTRUDER, for LDPE -BIO - RLDPE, Contrex feeding, 2 gravimetric + 1 volumetric components, screw diam. 65 mm.30 L/D, Rotating head, Low neck, pull off unit, gusseting units, Cason corona treatment, single color printing unit (for marks), 1.100 mm. double collection frame, BRA 25+ Eurochiller, working width: 1.100 mm., availability: February 2026, PRESENT CONDITIONS: running and testable

Schneidmaschine mit Rüttler - Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table große-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Year 2003 - Serial-No. 211.917 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhöhe / Ream height max. 160mm

TECNOVA EXTRUSION LINE, for PE PP PC PS ABS, BUFFER SILO, screw conveyor, CRAMMED FEEDING UNIT, extruder with 130 mm. screw, 37 L/D, n.1 degassing pump, 200 Kw.a.c.drive, semi-automatic hydraulic screen changer with 220 mm Ø screens, hydraulic power station, water ring pelletizer, drying centrifuge, vibro-classifier, constructed in 2019, the line is offered AS IS or RECONDITIONED, -----------------------------------------------------------, This line can be integrated with, ENGINE PLAST GRANULATOR (in photos), type BA 1.000.550.3, 75 kw drive, 12 mm screen (or bespoke), blower to scrap silo of extrusion line, installed power - used power in work: about 60-65% : 200

TECNOVA EXTRUSION LINE 130 mm. (5.11)500 kg/h (1,100 lbs/h), PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm (5.11) screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw a.c. drive, Total installed power 425 kw, used in work 250 kw ca., Semi-automatic non stop screen-changer with screens diam.250 mm., Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, Offered AS IS, WHERE IS., price options: as is, checked, lightly reconditioned, totally reconditioned

VIBRO CLASSIFIER FOR GRANULATES, 2 outlets, dimensions : 500 x 1.400 mm., screen holes 8 mm Ø, all parts in contact with water are in AISI304 stainless steel, wheeled supporting structure, complete with connecting plug, machine offered checked for good conditions, total dimensions : 1.900 x 850 x 1.000 kg.300

MG Tech Leanbox Case former Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Aircooled chiller MTA TAEevo Tech 081 22 kW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 2 pcs (centrifugal) Hydraulic module: 1 pcs. water pump Lowara CIE120/5/D Dimensions: 1.87x0.76x1.45 m. Weight: 375 kg. Working hours: 1110 h. Condition: Excellent

Schneidmaschine / Guillotine Wohlenberg CUT-Tec 92 Year 2007 - Serial-No. 3932-009 Schnittbreite max. 920mm / Cutting width max. 920mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition

Manufacturer: Infinite Technologies & Robotics Model: SJ2020R0C0001-MP05 Year of Manufacture: 2020 Name of Machine : G2Y Clips Mounting Machine Voltage: 380V Current: 8A Power: 4 kW Weight: 3 Tons Certification: CE marked Find more here - / Contact us at -

Manufacturer: Gandra Model: TEC 500+ Year of Manufacture: 2017 Condition: Used Filling Type: Automatic (Hot or Cold Filling) Supported Bag Sizes: 3L, 5L, 10L, 20L Packaging Feed: Bags inserted automatically from a belt or manually Output Capacity: Up to 500 bags/hour (3L capacity) Features: - Vacuum generation - Nitrogen injection after filling - Liter counter and bag counter - Manual removal of filled bags Power Supply: 400 V / 50 Hz Installed Power: 1.5 kW Power Consumption: 2 kW Required Air Pressure: 6 bar Find more here - / Contact us at -

Wohlenberg 155 CUT-TEC Reference No.: CU-001414 cutting-Line 2000 width 155 cm with monitor programmable air table side air table Baumann Jogger BSB 6L Baumann Unloader BA 6N complete line regular service in production available: 08/25 located: Germany

Tilting double miter saw for chair elements with loader TECNOSYSTEM - CE

REF-2650 PILLAR UNIFOILER-U 1kW INDUCTION CAP SEALER Manufacturer: PILLAR TECHNOLOGIES Model: UNIFOILER-U (U5R1002000000) Year: 2008 Induction sealing machine for sealing the foil inside the caps of bottles, jars, etc. Air-cooled Stainless steel design Portable cart with casters Power: 1 kW Voltage: 240 V/8 A/50-60 Hz/1PH Foil seal diameter: max. 120mm Room temperature: max. 40 °C Overall dimensions (mm): 900 x 560 x 1,700 (LxWxH) Sealing head: 126 x 51 mm Adjustable height

1 of used bag-in-box filler, make Technibag, type Sympaty, new 2014. Wired for single phase 230V 50Hz. Set for Vitop bags/taps.

1 of used bag-in-box filler, make Technibag, type Sympaty, new 2014. Wired for 3-phase 400V 50Hz. Set for Vitop bags/taps. With Inoxpa pump and Bürkert Flow 5030 PVDF wheel flow-meter.

TECNOVA RECYCLING EXTRUDER for BIO - PE PP ABS PC PS, Barrel with 90 mm screw diam. 37 L/D, Crammed feeding unit, Is working with BIO at 70 rpm yielding 270 kg/h, with PE at 100 rpm yelds 120 kg/h, N.1 degassing point, hydraulic screenchanger, water ring pelletizer from Gamma Meccanica, drying centrifuge, rotating classifier, electric cabinet for omplete management of the line, availability: 4 weeks for reconditioning or 1 week for AS IS, capacity: 120-270 kg/h, conditions: reconditioned, type: 90 mm. crammed feeder for light scraps

TECNOVA RECYCLING EXTRUDER, for PE PP PS PC ABS, Barrel with 130 mm screw 54 L/D, as new screw and barrel, n.2 degassing pumps for slightly moist or heavy prints, hydraulic screenchanger, hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet for complete management of the line, in need of reconditioning, capacity: 500-600 kg/h, conditions: reconditioning needed, type: 130 mm. 54 L/D 2xdegassing points 500-600 kg/h nominal throughput rate

Good day I have a Top Teca Print pad printing machine with automatic pad cleaning here! monochrome print. Absolute professional machine. If you have any questions, just email!

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3 Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial No.: 22004 ...

A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible.

Available this unit of TEC JET52 JEN II Valve ready to shipping.

Tig Welding Machine L-TEC Type Inverter TIG 200 DCWIG Welding Machine for DC DCFabr. No. 184548 year of construction approx. 1994Power 200 Amp. = 60 % ED 155 Amp. = 100 % EDEinfinitely variable setting rangeCurrent type DC (direct current)Mains connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with central connection and hand torch- with remote potentiometer (foot switch)- gas pressure relief valve- direct current only = DC- HF ignitionSpace requirement L x W x H 850 x 480 x 740 mmWeight approx. 150 kgThe welding test results in very

A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and man ...

Rotary indexing table, rotary indexing table with 16 stationsRotary transfer machine + hydraulic press TOXRundtaktautomat Special machine with several assembly stationsProduction and assembly system in rotary transfer processFrom special machine manufacturer AKE-technologies GmbHSerien number: 01-45-064Order number: 11111Year of construction: 2012- large rotary indexing table WHITE type TC500, with 16 stations- pressing station with TOX powerhouse- vibation conveyor- conveyor belts- test stations - some stations still open

Extraction system, central extraction, room air filter system ETS Efficient Technical Solutions GmbHZentral welding fume extractionYear of construction approx. 2005Volume flow approx. 5000 m³/hExtraction connection at the filter inlet 1200 x 150 mmExhaust air connection at the filter outlet 400 x 300 mmEngine power 10 kWNet connection 400 Volt, 50 Hz - Control cabinet for wall mounting- Bag filter- Maintenance flap for filter change- Centrifugal fan on top of the systemSpace requirement L x W x H 2000 x 1650 x 3650 mmTransport height without Fan 3100 mmWeight

MF welding machine with water-cooled impact pointMedium frequency impact pointManufacturer: TECNA (Italy) Type 3670 E CF00Serial No.: 00022 Year of construction 2014Nominal welding capacity 25 kVAMax. Welding power 160 kVANnet connection 400 volts, 50 Hz- Welding control TE750 or TE760- Impact point for one-sided spot welded joints- Ideal for repair work in the body area with the best welding quality- Water-cooled type 2BHPLN- Mobile transport trolleyWeight approx. 155 kgvery good condition - As good as new;

ESD-Electrostatically protected workbench, workbench HANDKE Industrie TechnikSingle workstation E(lectro) S(tatic) D(ischarge)Table length: 1100 / 1700 mmTable depth: 600 mmTable length Folding table: 600 mmWorking height: from 830 to 1200 mm- Volume-conductive ESD tabletop: 40 mm- Table top with hydraulic lifting system- Height adjustment via hydraulic pump by hand crank - Stable base frame made of aluminium system profile- Rear wall plate with standard square perforations- 1 piece drawer compartment W x D x H = 675 x 210 x 80 mm - 1 piece

Central and lateral air tables Light guards Chromed tables Digital program

Office chairs on 5 castors mi GS Condition New Purchase value 680,- +19 % VAT Immediately available in Blue - Black - Beige -Violet

length: 770 mm width: 230 mm height: 70 mm base area: . mm total power requirement: . kW weight of the machine ca.: 90 kg dimensions of the machine ca.: . m The technical data are manufacturer or operator specifications and are therefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

K-TECHNIK lifting beam was built by K-TECHNIK s.r.o. in the Czech Republic in 2024. The device is used for the safe lifting and transport of diverse loads weighing up to 4 tonnes. The combination of robust design with four hooks with fixed spacing makes it the perfect solution for cyclical work. The K-TECHNIK H lifting beam weighs 547 kg. Technical specifications of the K-TECHNIK lifting frame - maximum lifting capacity: 4000 kg - maximum lifting area (L x W): 4200 x 2750 mm - number of load hooks: 4 - device dimensions (L x W x H): 4860 x 2832 x 457 mm - K-TECHNIK device weight: 547 kg

Compressor Brand: Turbo Tech Model: Til-2700 Capacity: 45 m3/min 250 kW 45 m3/min centrifugal compressor Compressor Stage: 3 Cooler Material: Copper Nickel Motor IE Standard: IE3 Motor Brand: ABB Main Motor: 415V/50Hz/3Ph, IP55 Inverter Brand: ABB Relative Humidity: 80% Inlet Temperature: 35°C Cooling Water Temperature: 32°C For any enquiry, please contact : 1. email: sfhotopglove.com.my 2. Contact number: i. Stephanie Ho: +6012-213 7761 ii. Aaron Tan: +6017-369 8203

length: 710 mm width: 450 mm height: . mm base area: . mm total power requirement: . kW weight of the machine ca.: . kg dimensions of the machine ca.: . m 2 pieces The technical data are manufacturer or operator specifications and aretherefore not binding for us. We reserve the right to prior sale, our terms and conditions of business and sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, crane capacity 70 t More than 10,000 items of accessories for your workshop If you want to sell machines, production lines, or your business, then get in touch with us. You can find further offers on our website. Viewings are possible by arrangement. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 kN, 562 g/PS, 55 mm

Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold

Compressor Brand: Turbo Tech Model: Til-2700 Capacity: 45 m3/min 250 kW 45 m3/min centrifugal compressor Compressor Stage: 3 Cooler Material: Copper Nickel Motor IE Standard: IE3 Motor Brand: ABB Main Motor: 415V/50Hz/3Ph, IP55 Inverter Brand: ABB Relative Humidity: 80% Inlet Temperature: 35°C Cooling Water Temperature: 32°C For any enquiry, please contact : 1. email: sfhotopglove.com.my 2. Contact number: i. Aaron Tan: +6017-369 8203

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...

Used Bag-in-Box GANDRA TEC 500+ : 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit juices, vegetables, wines, etc. Supported packages: 3L, 5L, 10L, 20L. Bag Entry It is done automatically from the tape or manually. Vacuum generation and nitrogen input after pouring are standard. Equipped with a bag counter and a liter counter. Picking up the filled bags into the machines is done manually. Manufacturer: Gandra Model: TEC 500+ Year of manufacture: 2017 Recently, she poured NFC apple juice Capacity: Up to 500 bags with a capacity of 3 liters per hour • 400V/50Hz power supply; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW

With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible.

Height=1.55 m, Overall length= 1.3 m, Overall width= 1.1 m,