ice tec used for sale

SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - rubber roller - 18.5 kw - 90 sh - diam. 250 mm - rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - rubber roller - 11.1 kw - 40 sh - diam. 330 mm - n. 3 indipendent motors - working width 1100 mm - device for short pieces - year 2005

Capacity up to 6 tons For more details contact with us

Belt Conveyor/Conveyor Belt/Webbing Manufacturer: Schunk Fördertechnik GmbH Condition: used Model/Type: Strap Total length: approx. 5110 mm Total width including motor: approx. 600 mm Total width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Belt Type: Fabric Tape Material: Steel/Aluminum Frame height: 100 mm Engine included: 0.25 KW Including 3 feet height adjustable Internal Article Number: 2026032303 The conveyor technology ran until dismantling. Features: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent ...

Inv. Num. : 7474 Type: TPX 100 Producer: Teca-Print Created: 2006 Parameters: Vertical stroke: 100 mm Capacity: 1800 cycl./h Machine dimensions: 380 x 762 x 560 mm Weight: 30 kg Components of the offer: Base MS250 Cross Table KT30 Swab Feed

Round Plate, Packing Machine, ...

System for pressure increase or constant pressure maintenance, e.g. for the fresh water inlet of bottle washers 1.5 m³ stainless steel tank with frequency-controlled pump (see pictures for performance) Level control

turning diameter: 210 / 350 mm turning length: 400 mm control: Fanuc 0i-TC swing diameter: 500 mm travel -x axis: 195 mm travel -z axis: 430 mm spindle speed:: 3500 1/min bar diameter: 51 mm spindle bore: 75 mm C-Axis: 0,001 ° turret head: 12 Pos. taper in tailstock-quill: MK 4 tailstock travel: 100 mm diameter of quill: 80 mm rapid traverse X-axis: 30 m/min rapid traverse Z-axis: 30 m/min drive capacity - spindle motor: 11 / 15 kW voltage: 400 V total power requirement: 30 kVA weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,70 x 1,90 x 2,10 m chip conveyor: 2,80 x 0,60 x 1,30 m Transformer: 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: --- h - control: FANUC Oi-TC - Machine with C-axis and turret for driven tools (no driven tools in the accessories accessories available - Tool measuring arm - Parts collecting tray - Collet chuck device - 3-jaw chuck Ø ...

SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...

EVERDRY Absorber for Compressed Air DN600 x 1700

FOOD-TECH/ E044/ 2016 Blanching machine for carrots etc. 20 tons/h used, sold as it is, where it is, price ex location used, sold as it is, where it is, price ex location

Key data: 700 kN, 35 mm

used injection moulding machines ENGEL VICTORY 200-70 Tech Stock No.: 503473 Manufacturer: ENGEL Type: VICTORY 200-70 Tech Control: CC100 Year of Make: 2004 Hours: 77192 h Technical data closing page Clamping force: 700 kN Panel size h x v: 670 x 420 mm Min. installation height: 150 mm Plate spacing max.: 600 mm Opening travel: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Centering of movable plate D: 125 mm Centering of fixed plate D: 125 mm Tool weight: 675 kg Technical Data Spray Side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 1600 bar Screw length: 20 l/d Screw speed: 400 min Plasticizing current: 21 g/s PS Outdoor injection flow: 151 g/s hp Number of heating zones: 4 Nozzle travel: 250 mm Dimensions & Weight Machine dimensions LxWxH: 4.4m x 1.5m x 2m Total Weight: 5200KG Equipment Screen text German Screentext English  ...

Key data: 3000 mm, 900 mm, 200 mm

SPECIFICATIONS: Workspace: X: 3000 mm Y: 900 mm Z: 200 mm Main motor: 9.9 kW 18000 rpm CNC control No tool changer 1 vacuum pump 3 kW 120 m³ 6 positionable bars

Foaming Machine foaming without emulsifiers and additives through process splitting

For sale is a functional, reliable Rehsler industrial cooler of the type TAE EVO tech 381. Ideally suited for machine cooling, industrial processes or production plants. Until recently, the chiller was used in an industrial company as part of a production plant. Technical data: Manufacturer: Rehsler - Model: TAE EVO tech 381 - Year of construction: 2018 - Refrigerant: R410A - Refrigerant capacity: 17.5 kg - Power: 42.0 kW - Max. current consumption: 75.0 A - Protection class: IP54 - Max. operating temperature: 35 °C - Ambient temperature: -20 °C to +43 °C - Weight: approx. 995 kg - Pump Type: P3 More information about the cooling unit: - Robust industrial design - CE certified - Maintenance documents/documentation available If you have any questions, please feel free to contact us at any time.

Direct from meat-free facility. Perfect for making texturised meat-like products as well as petfoods, pizza toppings, ready meal ingredients etc.

MDR 2000 Rheometer Manuf.: Alpha Model 81001 220V 5amps Power 1000 VA Air pressure required PSI 120 max. / 70 min.

power capacity: - kW volt: - V ampere: A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a powerful Rehsler industrial cooler of the type TAE EVO tech 702. The cooling system is in a little-used, good condition and is ready for immediate use. The cooler is very suitable for industrial applications such as cooling machines, cooling buildings or for cooling within production processes in the food sector. Technical data: - Model: TAE EVO tech 702 - Year of construction: 2018 - Refrigerant: R410A - Refrigerant capacity: 2x 13.3 kg - Power: 70.0 kW - Max. current consumption: 119.0 A - Protection class: IP54 - Max. operating temperature: 35 °C - Ambient temperature: -20 °C to +43 °C - Weight: approx. 1,471 kg - Pump Type: P3 More information about the cooling unit: - Robust industrial design - CE certified - Maintenance documents/documentation available If you have any questions, please feel free to contact us  ...

– High-precision dosing, measuring and control technology – Needs-based, field-tested equipment options – High reliability – Stable dampening solution parameters Very little use Absolutely as good as new

Tool assembly block high quality for ISO 40, OSO 50, HSK 40 + 63 + 80 +100. Tool head can be changed by quick-release fastener. Tool can be swivelled 8x 45°.

Relay, contactor, semiconductor contactor, contactor -Elero: Uni-Tec 868 wireless wall transmitter -Application: roller shutters, awnings blinds, special applications -Price: per piece -Number: 1 pieces -Dimensions: 81x81x22 mm (LxWxD) -Weight 0.1 kg/piece

Rubber mat, rubber plate, stop rubber, stop plate, rubber cover, rubber pad -Gum plate: from pre-tensioning technology -Thickness: 48 mm -Width: 150 mm -Length: 200 mm -Number: 12 pieces -Price: per piece -Weight: 4.3 kg/piece

Thyristor -Type: S6070W -Price: complete -Number: 3x 250 pieces -Dimensions: 175/130/H215 mm per package

Thyristor -Type: S6070W -Price: complete -Number: 250 pieces -Dimensions: 175/130/H215 mm -Weight: 1.3 kg

Thyristor -Type: S8070W -Price: complete -Number: approx. 250 pieces -Dimensions: 175/130/H215 mm

Strapping machine, packaging machine -Semi-automatic: Pallet strapping -on: built-in transport frame -Voltage: 230 V -Dimensions: 650/800/H1250 mm -Weight: 102 kg

Ref.Nr. 00791 Name of the system Blechturm Flat goods storage Manufacturer: Heitling GmbH & Co. Profil systems today Model HEI – TECHMAT - II Built in 1999 Payload/tray 34 kN Number of compartments 59 Storage capacity 2006 kN Sheet format 2000x4000mm Stacking height 55/70 Width: approx. 7,500 mm Depth: 5,000 mm tower + 5,500 mm with extended cassette Height: approx. 7,500 mm Deadline by arrangement - immediately Condition To be viewed under power Currently used next to a laser cutting system

Electric motor, three-phase motor -Power: 0.37 KW -Speed: 2725 rpm -Shaft: Ø 14 x 30 mm -Construction: B3 -Protection class: IP 55 -Dimensions: 235/133/H180 mm -Weight: 7 kg

bed length: 2790 mm bed width: 2 x 240 mm bed height over floor: - total power requirement: 0 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,51,61,6 m No. 0302 2-station end trimming machine /cutting and centering machine EMAG, type TEC 2/1000 S SIEMENS System 3 control Working area: diam. 6.3-25 x 180-1000 mm, drive power: 12.5 kW Accessories: Loading gantry, chip conveyor, coolant device, internal coolant supply for station 1. coolant supply for station 1. The machine is equipped with 4 spindles, which are steplessly infinitely variable from 500-5000 rpm via separate DC motors. adjustable. Processing options: Grooving, peeling, turning, drilling (thread), thread chasing, chamfering, countersinking. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneumatic semi-automatic filling machine. Dosing volume: 50ml to 1000ml.

Capability characteristics: • High-quality tray destacker as a carousel with 12 stations • Material: stainless steel / plastic / plexiglass • Fast format change by replacing the denester cassette • Automatic lines are kept in continuous operation for longer, unnecessary downtime is minimized • Higher effective production output • Optimal personnel deployment: operating personnel can take care of other tasks Inclusive: Trolley for two denester cassettes Destacker cassettes: for trays approx. 265x180 mm and approx. 220 x 180 mm (adjustable) Destacker size: 1000 mm x 1500 mm x 1900 mm (L/W/H) Scale size: 780 mm x 800 mm x 1050 mm Burgmetaal / Technotron mobile denester with carrousel, 12 stations, maximum trayx dimensions: 265mm x 180mm, total dimensions: 1000 mm x 1500 mm x 1900 mm, including tool trolley, dimensions trolley: 780 mm x 800 mm x 1050 mm

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 1.5 kW -Output: 3x 230 V -Output frequency: 0-120 Hz -Number: 1x converter available -Price: per piece -Dimensions: 205/250/H190 mm -Weight: 6 kg/piece

Used packer by Techmar type PAK-5.0. New 2006. Packer for kefir. Weight 750 kg. Pressure 8 bar. Power 1.8 kW. Power supply 400 V.

- Fully Automatic filling and storage systems with WITTMANN security PLC.

Used machine in good condition. Available for immediate delivery. - Screw diameter: 45 mm - Shot weight max: 469 g - Injection rate: 255 cm?/s - Injection pressure: 2.050 bar - Injection volume: 510 cm? - Screw speed: 230 rpm - Screw L/D ratio: 24 - Clamping force: 4.000 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.450 mm - Heating zones: 24 - Cascades / Sequential valve gates: 12 - Platen size h: 1.200 mm - Platen size v: 1.1100 mm - Air Valves: 2/2 - Ejector force: 96 kN - Control: CC200 - Core pulls: 2 - Oil tank capacity: 955 l - Power: installed max: 45 kW - Weight: 22.300 kg - Dimensions (long x wide x high): 7.100 x 2.200 x 2.300 mm

Drive chain, duplex chain, roller chain -Size: 28B-2 1 3/4 inches -Width: 125 mm -Length: 0.9 m -Price: per meter -Number: 3x chains available -Weight: 15 kg

Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod -Net weight: 7 kg -Number: 2x package available -Price: per package -Weight complete: 7.6 kg/package

Wire electrode, welding wire, copper base MIG solid wire electrode for soldering copper, copper-silicon, copper-zinc alloys -Net weight: 10.9 kg -Number: 1x package available -Price: per package -Weight complete: 11.5 kg/package

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal actuator -Manufacturer: L-TEC, Pedal actuator foot remote control type FC-4 -Connector plug: 5-pin -Overall dimensions: 300/155/H190 mm -Weight: 4.2 kg

SPECIAL OFFER for renovation of warehouse space - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 102.273 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

Control module, compact control unit, fan coil control, electronic module -Manufacturer: Meitav-tec, Universal Fan Coil Control -Type: MIGA1-FC-SUPER -Operating voltage: 230 volts -Cardboard dimensions: 170/90/H45 mm -Weight: 0.5 kg

Radio system, antenna contact component, wireless RF modem, pico cell antenna -Manufacturer: CP Technologies, Pico Cell Antenna 2.4 GHz Ovp -Type: WAN-2185 -Number: 2 antennas available -Price: per piece -Cardboard dimensions: 280/240/H85 mm -Weight: 0.7 kg

Used machine in good condition. Available for immediate delivery. - Screw diameter: 22 mm - Shot weight max: 35 g - Injection rate: 78 cm?/s - Injection pressure: 2.060 bar - Injection volume: 38 cm? - Screw speed: 360 rpm - Screw speed: 360 rpm - Screw L/D ratio: 16,4 - Nozzle stroke / force max.: 200 / 28 mm / kN - Clamping force: 280 kN - Platen size (h x v): 500 x 450 mm - Oil tank capacity: 115 l - Operating hours: 101.636 - Dimensions (long x wide x high): 3.300 x 1.200 x 1.800 mm

roller chain, drive chain -per package: Length: 5 m -Size reinforced: 16B-1 1-way 1 x 17.02 -Quantity: 23 x pieces packages available -Price: per package -Package weight: 14 kg/piece

Oil hand pump, oil cabinet, oil cabinet, oil conveyor, oil dispenser, oil dispenser, oil station -Manufacturer: workshop technology, mobile oil dispenser with hand pump -Tank capacity: approx. l -Pump: hand operated -Hose: lockable with tap -Dimensions: 430/400/H770 mm -Weight: 15 kg

double pump for high speed - Screw diameter: 30 mm - Shot weight max: 104 g - Injection pressure: 2.180 bar - Injection volume: 113 cm? - Screw speed: 400 rpm - Nozzle stroke max: 250 mm - Clamping force: 1.200 kN - Mould opening stroke max: 500 mm - Mould height max: n/a mm - Mould height min: 300 mm - Daylight between platens max: 800 mm - Platen size (h x v): 740 x 470 mm - Heating zones: 2 - Ejector force: 47 kN - Oil tank capacity: 300 l - Power: installed max: 25 kW - Dimensions (long x wide x high): 4.400 x 1.500 x 2.000 mm - Weight: 7.300 kg

Schneidmaschine - Guillotine Wohlenberg CUT-Tec 76 Year 2005 - Serial-No. 3901-006 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 50 mm

Precision grinding vise with pull-down or spindle. Hardened steel, rust resistant.

FERROMATIK MILACRON K-TEC 450 injection moulding machine was built in 2007 in Germany by Ferromatik Milacron GmbH. This multifunctional, technically advanced machine is used for the mass production of plastic parts of different colours, shapes and sizes. The machining process involves reliable components with excellent parameters, including among others a precision mould clamping system that operates with a force of up to 450 tonnes. In turn, the parts produced by injection moulding are distinguished by their high repeatability, durability and precision. The K-TEC 450 injection moulding machine weighs 30200 kg. Technical specifications of the FERROMATIK MILACRON K-TEC 450 injection moulding machine - maximum clamping force: 450 t (4500 kN) - EE1 screw diameter: 80 mm - EE2 screw diameter: 30 mm - screw length/diameter ratio: 20 L/D - maximum injection pressure: 292 bar - maximum ...