ice tec used for sale

Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco 1000 -Heating output: 15 kW -Nominal cooling capacity: 100 kW Technical data: see photo of the nameplate -Dimensions: 1190/320/H750 mm -Weight: 99 kg

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, converter, inverter -Manufacturer: Control Techniques, Commander SE frequency converter -Type: SE2D200150 SE 2.5M/TL -Power: 1,5 kW -Input: 200/240V - 50/60Hz -Output: 3 Ph 0-240V 0-1000Hz -Dimension: 145/130/H280 mm -Weight: 3.3 kg

Fuel gauge, oil conveyor, oil dispensing system, oil station, fuel pump, tank data acquisition, tank system display, DSS microcomputer -Manufacturer: Tecalemit, DSS data interface -Art.No.: 2.78 11 10.1 -Smallest measuring quantity: 0.5 liters -Volume flow: 1 to 10 l/min -DSS Microcomputer: 1.575001.1 -Dimensions: 370/280/H180 mm -Weight: 8.2 kg

Desk, height adjustable desk -Manufacturer: Palmberg, height-adjustable desk -Tool-free: height adjustable by means of removable adjusting elements -Width: 2000mm -Depth: 800 mm -Height: 680-760mm -Number: 6x desk available -Price per piece -Dimensions: W/D/H 2000/800/H720 mm -Weight: 43 kg/piece

Clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks -Manufacturer: Teco, clamping tool clamping bracket, various designs -End terminal: Type 30501 / 30502 / 30503 2 pieces each -Step block: Type 40102 / 40103 / 40104 4 pieces each -Clamping bolt: thread M10, see photos 24 pieces -Price/Delivery: complete -Dimensions: 390/190/H210 mm -Total weight: 6.5 kg

Dosing rotary valve, rotary valve, dosing valve, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw -Manufacturer: Tecom Modena, rotary valve 8 blades type PST 28 D with drive -Speed: 37 rpm -Drive motor: 1.50 kW -Inlet opening: 350 x 250 mm -Outlet: Ø 90 mm / Ø 76 mm -Dimensions total: 970/690/H425 mm -Weight: 146 kg

winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope, round strand rope -Manufacturer: TECI, crane rope round strand rope Ø 9 mm -Rope type: 7x19 -Length: 58 m -Number: 1x wire rope available -Price: per piece -also other crane ropes: available -Transport dimensions: Ø 300 x 220 mm / Ø 400 x 300 mm -Weight: 21 kg / 22 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 2 pieces -Type: PTPk-6/5 / MK6/5 -Shipping/Price: complete -Transport dimensions: 127/64/H148 mm -Weight: 4.0 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 4 pieces -Type: MK6/5 2 pieces / MK6/4 / MK6/3 -Shipping/Price: complete -Transport dimensions: 260/220/H65 mm -Weight: 11.8 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5 2 pieces -Type: MK5/4 -Shipping/Price: complete -Transport dimensions: 345/100/H50 mm -Weight: 7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, extension sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 400 / 475 mm -Shipping/Price: complete -Transport dimensions: 475/44/H22 mm -Weight: 2 kg

Fuel gauge, oil pump, oil dispensing system, oil station, fuel pump, tank data recording, tank system display, oil cabinet, fresh oil pump -Manufacturer: Tecalemit, electric pump for fresh oil -Type: 1.54 80 01.4 -Volume flow: 1 to 10 l/min -Engine: Hanning 0.55 kW -Pressure vessel: volume 2.8 liters -Individual components: see photos -Number: 2x oil cabinet available -Price: per piece -Dimensions: 500/480/H250 mm -Weight: 19 kg/piece

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack -Manufacturer: Automata, Control Rack -Type: Rack VME 9 SLDT 7U/R -Printed circuit boards: Tecnint TVM 743 Tecnint TVM 200 CA1-94-V1 -DC/DC Converter: cdi -PowerSupply: Automata VME 150W -Individual components: see photos -Price/Sale: complete -Dimensions: 300/280/H310 mm -Weight: 9.9 kg

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband<CRLF>1 Bürste<CRLF>1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

agicom recycling machine trade: The used single-shaft shredder from Tecnoecology is extremely powerful and is ideal for shredding cables, but also for composites and plastics. Equipment: hydraulic pusher. Number of blades: 7+8 (rotor + stator) Rotor speed: 130 rpm Cutting rotor: Ø 180 mm - 500 mm Electric motor: 17.0 kW, 380 V Weight: approx. 1,200 kg Dimensions: approx. 1540 x 1150 x 1700 mm Throughput: max. 200 - 400 kg/hour Safety: retraction of the feed in the event of overload, reverse rotation of the rotor in the event of blockage

Doja-Tec glazing line with speed controller Stainless steel version plating products Connection 400V, 16 A CEE plug Used device

Pharma Technology PTGV 1200 CE N ECE capsule deduster/polisher with Ceia THS/PH21N metal detector, empty capsule eliminator to remove any empty, broken or opened capsules and venturi vacuum transport, suitable for capsule sizes 000 / 00E / 00 / 0E / 0 / 1 / 2 / 3 / 4 / 5, capacity from 220.000 capsules/h (size 00) up to 500.000 capsules/h (size 4), height product inlet 864 +/- 10 mm, height product outlet 1023 +/- 20 mm, machine floor space approx. 1289 x 615 mm (W+D), machine height approx. 1788 mm, electrics 230 V AC – 50/60 Hz

General SKU440W1452 MakeAgilent Technologies Type1100 series No.DE43628255 Year of construction2005 LocationBarneveld Specified Features - Miscellaneous Capacity100x 2 ml vials in 1 tray, 40x 2 ml vials in 1/2 tray, 15x6 ml Information Floor space1,00x0,60 m Total height0,80 m Weight100 kg CEcheck Extra SpecificationsHPLC with autosampler. UV-visible detectors, pumping system, fluorescence detector, LC/MSD unit, refractive index detector, GPC/SEC system, Micro plate sampler, 220, Chem station : all product nrs: G1314A G1312A G1379A G1316A G1367A G1330B IsolatorsAgilent TechnologiesLaboratory Equipment > IsolatorsBrand > Agilent Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 ri ...

BERTHOLD TECHNOLOGIES MITHRAS LB 940 Multimode Microplate Reader Plate reader for luminescence and fluorescence Number: 38099-33 Untested Equipment Without a computer Without software

Silo system with 4 containers HB-TECHNIK - Capacity of a total of 16 tons of flour - 4 aluminium silos - Incl. scale and dosing unit - Condition: Good, ready to use - already dismantled - Transport costs and assembly on request

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

This coding machine from Videojet Technologies GmbH is a powerful thermal transfer printer designed for reliable and precise product marking in packaging lines. With a capacity of up to 150 packages per minute, it is ideal for high-speed production environments. The machine is operated via the intuitive CLARiTY control system with a single monitor, ensuring simple and user-friendly handling. The device is mounted on a height-adjustable mobile carrier with feet and wheels, allowing it to be flexibly integrated into existing lines. Thanks to its modern design and robust construction, this machine offers a reliable and efficient solution for printing data, batch numbers, and product information. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: Thermal transfer printer, Capacity: 150 packs/min , Current: 1,86 - 3,85 A, Voltage: 100 - 240 V, Frequency: 50 ...

3 cylindroconical fermentation and storage tanks with frame and cone cooling, Additional title: 3 pieces, with frame and cone cooling, Total volume: 3000 l, Pressure capacity: 3 bar, Length: 1860 mm, Width: 1860 mm, Height: 3700 mm, Material: stainless steel, Base construction: standing on feet, Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

Capacity for the LTM120 is 4600 to 4800 pieces / hour. PIC: SABRINA (0177418071)

Auto Glove Sampling Machine NX Series PLC Factory : F40

For sale I offer a hydraulic cylinder from Tecpos. The cylinder was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos TSLC-3013 Operating pressure: max. 700 bar Stroke: 13 mm 30 ton Flat cylinder -Single-acting, with spring retraction Shipping available for an extra charge. The hydraulic cylinder is workshop tested and sold immediately ready for use with a new UVV test and can be tested on site. Other accessories available on request. # Short Stroke Heavy Duty Cylinder # High Pressure Hydraulics # Compact Cylinder # Light Metal Cylinder # High Pressure Cylinder # Universal Cylinder # Hydraulic Cylinder # Directional Cylinder # Hydraulic Punch # Hydraulic Pressure Cylinder # Lifting Cylinder # Pressure Punch # Hydraulic Short Stroke Cylinder # Hydraulic Flat Cylinder

For sale I offer a hydraulic hand pump from Tecpos. The hand pump was used as a demonstration device in the past and accordingly shows signs of use. Details: Tecpos ESP-08 Operating pressure: max. 700 bar Oil Supply: 800cc Shipping available for an extra charge. The hydraulic hand pump is workshop tested and sold ready for immediate use with a new UVV test and can be tested on site. Other accessories available on request. # Hand Hydraulic Pump # Hand Pump # Hydraulic Cylinder # Hydraulic Hand Pump # High Pressure Pump # High Pressure Hand Pump # Hydraulic Hand Pump # Hydraulic Pump

Aircooled chiller/Heat pump MTA TAEevo TECH 802 159 kW/184 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 184 kW / 52.32 tons (40/45 —7°C) Year of manufacture: 2016 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP182KQE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 3 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Lowara PLM112B14S2/355-E, expansion vessel. Dimensions: 3.54x1.25x2.2 m. Weight: 2500 kg. Working hours: 8650/7460 h. Condition: Good

Aircooled chiller TECHNOTRANS COOLSET OMEGA K T 250L 24 KW Cooling capacity: 24 kW / 6.82 tons (LWT = +28°C, Ta= +25°C) Year of manufacture: 2016 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Danfoss SZ084S4VC (scroll) Type of refrigerant: R407с Number of fans: 1 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos ML90FA-J-H3-CMS2A, expansion vessel, buffer tank. Dimensions: 0.79x0.86x1.8 m. Weight: 170 kg. Condition: New

Tecnopool spiral cooler, model: TW 4-350, serial number: I0002129-001330, year of construction: 2018, plastic mesh belt, belt width: 330 mm, total belt length: 192000 mm, useful belt length: 173000 mm, tier length: 19463 mm, tier pitch: 220 mm, clearance between tiers: 170 mm, maximum product height: 1.1-2.75 m/min, belt cleaning system. Cooling compressors not included. Lot is already dismantled and ready for transportation.

Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency an ...

Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph This HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). This machine handles bottle formats up to 2 liters and produces up to 2700 bottles per hour (bph). Moreover, the system uses a 4+4 configuration, meaning four upper and four lower cavities, which optimize production with a symmetrical and highly efficient design. You can access this machine starting mid-October. Main Technical Features of the HDPE Blow Molding Machine TECHNE SYSTEM To ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 ...

Used Linear Magnetic Flowmeter Filler – Overview This second hand linear volumetric filling machine is engineered for PET and HDPE containers up to 5 L, ideal for used bottling line upgrades in beverage production and industrial packaging. Equipped with 6 magnetic flowmeter dosing nozzles in 316 stainless steel, a CE-compliant HMI/PLC platform, and a hygienic stainless-steel build, it delivers accurate, repeatable fills for still water, detergents and liquid soap. Technical Specifications & Performance Data Core configuration Model: Linear 6-nozzle magnetic flowmeter filler up to 5 L Filling principle: Volumetric dosing via magnetic flowmeters (non-isobaric) Nozzles: 6 x 316 stainless-steel filling nozzles with individual magnetic flowmeters Container materials: PET and HDPE Container size range: up to 5 liters Applications: still water, detergents, liquid soap and similar non-carb ...

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10,800 cph represents indeed a reliable and efficient solution for industrial bottling operations. Equipped with specialized and high-quality equipment, this line is meticulously designed to maximize productivity and ensure in fact optimal results. CFT Empty Can Twist Rinser- Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans. Moreover, with its dual can rinser system and spare parts sets for 0.35L and 0.47L aluminum cans, it ensures flexible operation tailored to specific production needs. Additionally, the rinse process guarantees pristine can surfaces, vital for maintaining product integrity. CFT 20 Valve Can Filler – Seamer of the Used filling line CFT for cans up to 10800 cph The 2013 model RS20 CFT 20-valve can fille ...

Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil memb ...

Tecnoindustria Used Pasteurizer Completely Overhauled Tecnoindustria brand mesh pasteurizer all stainless steel with squared stainless steel mesh complete with water recycling tanks with relative pumps, infeed and outfeed belt for jars or boxes, blower for drying jars or boxes, steam modulating group, heat exchanger, various connecting pipes and all its accessories for operation. The machine is totally overhauled It is made up of two sectors of which: first sector useful length 11450 mm second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400 Features by section Sterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,30 ...

1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

turning diameter:420 turning length:1230 mm swing over bed:700 mm swing diameter over slide rest:550 mm centre distance:1390 mm y-axis:+/- 60 mm turning speeds:3500 1/min turret (x-stations):12 power capacity:22 / 18,5 kW :1 / 12 x BMT rapid traverse x + z axis:20 / 24 m/min :76 mm total power requirement:50 kVA weight:7,8 t dimensions of the machine ca.:4,10 x 2,05 x 2,21 m CNC lathe with Y-Axis and driven tools, C-axis, tool eye, hydraulic 3-chaw-juck D= 250 mm, reinforced pump 15 bar, pressure-compensated clamping cylinder , 2 step clamping pressure, prepared for steady (without steady), progr. tailstock (dragging device), live tool device (3,7 kW, 3.000 rpm), chipconveyor, 1 pcs. live tool included approx. 15.500 working hours

mobile finest oil filtering technology, new Technical oils serve just one purpose: It should run smoothly. After all, a machine downtime costs you time and money. Our filter technology was developed in order to optimize machine running times. Ultra-fine filter technology ? for the sake of your machines In order to achieve a high level of purity we offer the appropriate technology for the different oils and application areas: - in order to achieve the best purity class - under the aspect of economy Finest filter technology Our systems maintain the oil of your machines so that the necessary oil purity is secured: - Ultra fine filtration of technical oils up to 1µm - Extremely long service life of the filters with up to 2.000 hours - High capacity to absorb water with up to 5 liters - Before starting up - Mobile for maintenance intervals on several machines - In the oil circuit during run ...

mobile finest oil filtering technology, new The mobile ultra fine filter system M 130 is the flagship among the mobile filter systems. Equipped with a scalper, a (washable) pre-filter for coarse impurities (up to 5 µm, for example swarf), and two C-1000 housings, this system leaves nothing to be desired in order to process technical oils, water-/ oil- or oil-/water emulsions to excellent purities. The scalper and the pre-filter increase the life service of your systems and the filter elements significantly due to the two-stage pre-filtration. This is followed by the oil processing with the reliable ultra fine filter elements which are also used in space travel. You achieve purity values up to NAS 1 (ISO 4406: 13/10/7) and better technical data M 130 flow oil: bis 1.050, 1.500, o. 2.100 liter/hour dimensions: height: ca. 1.175 mm, width: 585 mm, depth: 811 mm weight: ca. 93 kg Please, c ...

General SKU201P093 MakeSGL Technik Gmbh Meitingen (DE) TypeRS-77-2-5515.1 LocationBarneveld Material Tube materialGraphite Diabon-NS1 G20-3-170 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Diabon-NS1 G20-3-170 Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface8m2 Tube capacity62 Ltr Number of tubes:55 Tube diameter37mm Tube length1500mm Wall thickness tubes5mm Max. temperature170 Degr.C. Shell capacity100 Ltr Shell diameter406mm Shell length1380mm Wall thickness shell6mm Max. temperature170 Degr.C. Shell connections(2x)DN80, DN40 Cover connections(2x)DN150 Information Floorspace0,7x0,7 M Total height2.2M Weight600 KGOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic ...

General SKUR0900 MakeTechnoglass spa (Ita) TypeAE 6300 No.5744 Year of construction1996 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7250 ltr (6300 ltr Nett) Vessel sizesDia 1800x 3100mm Dished bottomcheck Dished top sidecheck ManholeDia 500mm Top connectionsDN150 (4x), 250 (2x) OutletDN100 With jacket(710 ltr) Max. temperature-30/200 degr.C With paddle stirrerHastelloy C22 Motor15 kW, 400V (Ex) Speed mixing shaft20-80 rpm Glass Reactors MaterialGlass Information Floorspace2.3x 2.3 M Total height5.8 M Weight8500 kg ATEX compatiblecheck Extra SpecificationsBottom part make Technoglass (1996) Cover part make Tycon (1985) : Other chemicalBiotechnologyAgroch ...