ice tec used for sale

Key data: 1350 mm, 3 st.

CALIBRATING SANDING machine with 3 belts model DMC TECHNOSAND 1350 RRP second-hand machine working conditions excellent machine with vacuum unit for table machine with CE regulation: YES instruction booklet : YES universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various technical data: max. working width mm.1350 max. working height mm.150 min. working height mm.3 dimensions of abrasive belts mm.1380 x 2620 automatic centering composition machine ( 3 units , 3 independent motors ) : 1st unit : rubber roller diameter mm.170 - shore 45 . motor power Hp 15 automatic blowers for cleaning abrasive belts 2nd unit : rubber roller diameter mm.170 - shore 45 . motor power Hp 15 automatic blowers for cleaning abrasive belts 3rd unit : electronic segmented pad n.34 sectors . motor power Hp b ...

A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible.

Inv. Num. : 9102 Type: Hi-TECH 230 BL YMC Producer: Hwacheon Created: 2019 Parameters: Control system: FANUC Hours: 6623 h Maximum turning length: 584 mm Maximum turning diameter: 400 mm Maximum turning diameter over bed: 750 mm Maximum spindle speed: 3500 1/min Weight: 6650 kg

Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data:  Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loop belt rolls ...

Clamping force: 850kN, tie-bar spacing: 370mm/370mm, platen dimensions X/Y: 540mm/540mm, opening stroke: 450mm, machine dimensions X/Y/Z: approx. 4000mm/1300mm/2000mm, weight: approx. 4250kg. Some parts of the machine have been renewed in recent years. Documentation available. An on-site inspection is possible.

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

KOCH TECHNIC Feeder/Doser/Mixer Set 1 Pallet Type : TM 6D Year: 1995 Dimensions (L x W x H) : 1,20m x 0,90m x 0,50m Weight : 100 kg

Clipping machine Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa

consisting of: Rinser 15 Nozzles Vacuum filler 16 Filling valves Screw capper 3 heads 22 mm screw cap

This complete cable recycling plant has a capacity of 1000 kg/h and is designed for the granulation and separation of electric cables, recovering both copper and plastic materials. Complete Line Components - Pre-shredder: Tecnoecology TG 1250, 55 kW - Blade mill 600 mm: Tecnoecology, 37 kW - Zig-zag separation plant: Tecnoecology - Cell mill: Tecnoecology T25/45, 55 kW - Separation table: Tecnoecology TV 500 - Vibratory screen 600 mm for separation of ground plastic and fine copper - Separation table: Tecnoecology 300 for fine copper recovery - Dust filter: 72-sleeve type - Pneumatic transport fans - General electrical control panel Find more here - .ucymachines/ Contact us at - sales@ucymachines

Material: Stainless steel 1.4301 Drive: 5.5 KW Weight: 2050 kg Screening area per deck: 3.65 m² 2 x ball head cleaning 2 x sieve insert with mesh size of your choice: 0.1 - 5mm

Robot 4-osiowy: osie X, Y, Z, napędzane serwomotorami (elektryczne); oś C Przejazdy w osiach: X-440, Y-800, Z-1250 Waga: 185 kg Podstawa robota (adapter), klatka bezpieczeństwa

Manufacturers and Models: - Tima Tec - Varioroll Type 418 - PLEVA - RF110-AF120 - Erhardt + Leimer - CN 4007 - Menzel - S104413 Technical Data - Working width: 3,300 mm - Years of Manufacture: 1999 to 2005 Line Components - Unwinder - Dancer with sliding plate storage - Surface smoother - Microwave sensor - Metal detector - 4 coating chambers - Inspection stand - Winder Find more here - .ucymachines/ Contact us at - sales@ucymachines

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

TECHNICA ZSM 5100 center grinder for long shafts max L = 1000 Centering bore diameter 3 - 60 mm, workpiece clamping range 4 - 220 mm, workpiece length 50 - 1000 mm, workpiece weight max. 120 kg, centering bore angle 60°, grinding head adjustement max. 160 mm, grinding spindle speed 10000 - 45000 rpm, dressing stroke of the grinding disc dressing unit max. 40 mm Machine under power in our warehouse Mimu Machine Tools Gussago BS Italy

Cooking piece, cream cooker Floor-standing unit approx. 100 capacity Stainless steel version with agitator with boiler tilting device double-walled, with thermal oil/electric heater Heating 85°C

General SKUR1336 MakeRudert Edelstahl Technik GmbH (D) TypeReaktor 10m3 LocationBarneveld CEcheck Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume10000 Ltr. Motor37 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity10000 l Vessel sizesdia. 2400x3500mm Dished bottomcheck Dished top sidecheck Manholedia 600 mm Top connectionsDN100 (3x), DN150 (2x) DN250 (1x) OutletDN150 Half coil jacketedcheck Max. temperature170°C With paddle stirrercheck Motor37 kW, 230/400 V Speed mixing shaft80 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General No.P033321 Year of construction2004 Mounted on legscheck Floorspace2,8x2,7 m Total height5,9 m Weight6000 kgGeneric medicinesOintmentsFine chemicalsOther chemicalRubberAgrochemicalsPlasti ...

CHARMILLES TECHNOLOGIES ROBOFIL 510 with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional. Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A. Automatic wire tensioning, precise wire guidance, stable construction. Control console (Siemens), protective devices, emergency stop.

General SKU231U194 MakeTecno Vibracione Venazeti LocationBarneveld CEcheck TypeVVC70A 16/14 Main Features MaterialStainless steel Surface0.76 m2 Sizes diameter700 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,76 m² Number of sieve decks:2 Sieve sizesDia: 695 mm InletDia: 275 mm OutletDia: 110 mm (3x) Drive excentercheck Motor1,12 kW,380 Volt Sieve perforation5 mm and 3 mm MaterialStainless steel 1.4301 (304) General No.3117/3357/00 Year of construction2000 Mounted on mild steel framecheck With switchcheck Floor space0,9x0,9m Total height1,05m Weight210kgPowdered foodsGeneric medicinesStarchOther chemicalRubberPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicConsumer wasteVibro sievesTecno Vibracione VenazetiIndustries > ...

General SKU360S873 MakeTrennso Technik (D) TypeSIK 500-1200-2-O No.0600117 Year of construction2011 LocationBarneveld Main Features MaterialMild steel Surface0.5 m2 Size length1200 mm Sizes width440 mm Specified Features - Vibro sieve Vibro sievecheck Sieve surface0,5 m2 Number of sieve decks:2 Sieve sizes440x1200mm Inlet190x190mm Outletdia 200mm (2x), dia. 250mm (1x) Drive excentercheck Motor0,75 kW 220-240/380-420 volt Sieve perforationdia. 10mm, 1x1mm With ball cleaningcheck MaterialMild steel General Mounted on mild steel framecheck With switchcheck Floor space2,1x1,3 M Total height2,3 M Weight950 KgPowdered foodsGeneric medicinesStarchOther chemicalRubberPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicConsumer wasteVibro sievesTrennso  ...

General SKUR0915 MakeTechnoglass (vessel) / Tycon (top part) (Ita) Type5445 ltr LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7260 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7260 ltr Vessel sizesdia. 1800x3190mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm Top connectionsDN150 (5x) DN250 (2x) Outletdia. 100mm With jacket710 ltr Max. temperature-30/200 Degr.C With paddle stirrercheck Motor15 kW 380 Volt (Ex) With jacketcheck Glass Reactors MaterialGlass - Enamel General No.5745 / 2705 Year of constructionvessel part 1996/ top part 1985 Floorspace2,3x2,3 M Total height5,9 M Weight9000 Kg ATEX designedcheck Extra information Clamped top Generic medicinesOintmentsFine chemicalsOther chemicalBi ...

General SKUR1191 MakeTechnoglass Spa (IT) LocationBarneveld Type6300 L Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume7590 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7590 Ltr (nett.6300 Ltr) Vessel sizesdia.2000mm x3050mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connections2x DN250, 5x DN150 OutletDN150 With jacket(700 Ltr) (16,6 m2) Max. temperature-30/200 Degr.C. With paddle stirrerHastelloy C4/C22 Motor15 kW, 400 Volt (Ex) Speed mixing shaft6.9-69rpm With jacketcheck Glass Reactors MaterialGlass - Enamel General No.5785 Year of construction1996 Floorspace2,5x2,5 M Total height5,0 M Weight8500 Kg ATEX designedcheckGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & ...

General SKUR1177 MakeTechnoglass S.P.A. (IT) Type1825 ltr. LocationBarneveld Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume1825 Ltr. Motor1.1 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity1825 Ltr (1600 Ltr) Vessel sizesdia.1000mm x2272mm Dished bottomcheck Dished top sidecheck Top connections2x DN200, 2x DN100, 2x DN80 OutletDN80 With jacket(130 Ltr.) Max. temperature-10/200 degr.C. With propellor stirrercheck Motor1,1 kW, 380 Volt (EX) Speed mixing shaft177 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel General No.4622 Year of construction1990 Floorspace1,5x1,5 M Total height3,7 M Weight1300 KG ATEX designedcheckGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsDetergent & surf.Other pharmaceut ...

General SKUR0900 MakeTechnoglass spa (Ita) TypeAE 6300 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity7250 ltr (6300 ltr Nett) Vessel sizesDia 1800x 3100mm Dished bottomcheck Dished top sidecheck ManholeDia 500mm Top connectionsDN150 (4x), 250 (2x) OutletDN100 With jacket(710 ltr) Max. temperature-30/200 degr.C With paddle stirrerHastelloy C22 Motor15 kW, 400V (Ex) Speed mixing shaft20-80 rpm With jacketcheck Glass Reactors MaterialGlass General No.5744 Year of construction1996 Floorspace2.3x 2.3 M Total height5.8 M Weight8500 kg ATEX designedcheck Extra information Bottom part make Technoglass (1996) Cover part make Tycon (1985)  Generic medicinesOintme ...

General SKUR0905 MakeTechnoglass spa (top part) / Tycon (vessel part ) (IT) TypeAE 6300 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket7 Bar Main Features MaterialGlass Volume6300 Ltr. Motor15 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity6300 ltr (Nett.) Vessel sizesdia. 2000x3060mm Dished bottomcheck Dished top sidecheck Manholedia. 500mm (man hole cover missing) Top connectionsDN250 (2x), DN150 (5x) OutletDN150 With jacket(685 ltr.) Max. temperature-25/250 Degr.C With anchor stirrercheck Motor15 kW 380 Volt (Ex) With jacketcheck Glass Reactors MaterialGlass General No.4512 Year of construction1990 Floorspace2,4x2,4 M Total height5,1 M Weight9000 Kg ATEX designedcheckGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsDetergent & su ...

A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible.

General SKU071E295 MakeTechnoglass Italy No.2803 Year of construction1984 LocationBarneveld Material Lining materialGlass - Enamel Pressure Working pressure20 Bar Vacuum possiblecheck Working pressure jacket7 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume2500 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Capacity3355 l. (3000 l.) Vessel sizesDia. 1600x1300 mm Dished bottomcheck Dished top sidecheck ManholeDia. 350x450 mm Top connections(6x) Outletdia. 100mm With jacket(350 l.) Max. temperature-25/+200 °C. With dissolver stirrerimpeller style Without motorand gearbox With jacketcheck General Floorspace2,0x2,0 m Total height4,0 m Weight6000 kgGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyAgrochemicalsCatalysts & fillersSolventsDiscountDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoSolid  ...

Table milling machine - swivel spindle milling machine Manufacturer: Holzkraft Model: Tecnomax T50 Year of Make: 2007 Spindle swivel Feed unit Manufacturer: Maggi Model: Steff 2034

Belt sander manufactured in 2008. This TECNOLEGNO COMPACT 52 is a 5-aggregate sander designed for sanding edges and profiles. If you are looking to get high-quality sanding capabilities, consider the TECNOLEGNO COMPACT 52 machine we have for sale. Contact us for further details.

Techmatik Splitting Machine for Concrete Products Techmatik Splitting machine for concrete products

Machine still visible in operation at user’s premises.

This 7-axis Quick-Tech I-42U was manufactured in 2015. It features a maximum bar diameter of 42 mm and a maximum machining length of 250 mm. The machine is equipped with a powerful spindle speed of 6000 rpm and includes an automatic bar feeder. If you are looking to get high-quality turning capabilities, consider the Quick-Tech I-42U swiss type turning machine we have for sale. Contact us for further details.

diameter range 26 mm drawing speed 10 m/min diameter range - mild steel 26 mm diameter range - high tensile 24 mm capstan diameter 1300 mm

Key data: 1400 kN, 139 g/PS, 35 mm

1.0 St. gebr. Injection Molding Machine with Robot, Machine comes from cleanroom production Manufacturer: ENGEL Type: VICTORY 330/140 TECH Year of Make: 2011 Clamping force: 140 tons Spar spacing: SPARLESS Screws DN: 35 mm Max. displacement: 154 ccm³ Moulded part weight 139 g/hp Control: CC200 Equipment: -Robot, manufacturer: Engel, type: V12 -2 x Core Pull -Blow-out valve -16 hot runner control zones -Protective fence -Conveyor belt

A high-temperature water temperature control unit for injection molding tools, extrusion systems, die-casting tools and industrial temperature control processes up to 200°C is offered. Temperature range: 0°C to 200°C, circulating medium: water, heating capacity: 45kW, cooling capacity: 120kW, filling volume main unit: 32l, filling volume valve unit: 2l, weight: approx. 300kg, dimensions X/Y/Z: approx. 700mm/900mm/1900mm, weight of the valve unit: 37kg. Equipped with control via touch-screen visualization, separate control cabinet and external valve unit for high-temperature applications. Documentation available. Inspection possible by appointment.

TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used, in good conditions

General SKU201P093 LocationBarneveld MakeSGL Technik Gmbh Meitingen (DE) TypeRS-77-2-5515.1 No.76461/1A Material Tube materialGraphite Diabon-NS1 G20-3-170 Pressure Working pressure shell6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Graphite Surface8 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Notified bodyTÜV Heating surface8 m² Tube capacity62 l Number of tubes:55 Tube diameter37 mm Tube length1.500 mm Wall thickness tubes5 mm Max. temperature170°C Shell capacity100 l Shell diameter460 mm Shell length1.380 mm Wall thickness shell6 mm Max. temperature170°C Shell connections(2x) DN80, DN40 Cover connections(2x) DN150 MaterialMild steel General Year of construction1998 Floorspace0,7 x 0,7 m Total height2.2 m Weight600 kgPowdered foodsGeneric medicinesOintments ...

2 x Injection moulding machines Engel VC 2460/180 tech BJ 2023

TECNOVA RECYCLING EXTRUDER, mod.Mini 60 mm., for PE PP scraps, throughput rate around 127 kg/h, buffer silo, forced feeding unit, extruder with 60 mm screrw diam., 35,3 kw drive, semi-automatin changer, water ring pelletizer, drying centrifuge, electric cabinet for whole management., Machine offered reconditioned, installed power - used power in work: about 60-65% : 35,3 kw, capacity: 127 kg/h depending on materials, conditions: used,reconditioned, type: single screw PE PP ABS PS PC recycling

1.Industrial filter housing tank Material S/S304 Capacity (bag) 7 dia x 32'' L Total Higher of Machine:905 mm Inlet pipe position for service Side of tank Conection In/Out 2'' Flange Max.operating pressure (bar) 10 Max. operating tempature (๐C) 100 Flowrate :45 m3/hr Vent 1/4'' Clean Drain 2'' Shell O - Ring EPDM Pressure gauge 2.5", 1 unit 2. Filter bag Nylon NY-250 Micron/ Collar:SS ring Size 7" x 32" (2 units/tank) For latex online filtration project SF13 Location: F8A Thailand PIC 1.Ms.Warisara S E-mail : warisaratopglove.co.th

Film densitometer Techkon RT120

die-sinking EDM machine, year 1997. Used machine. More info & price on IndustrialBuyer.

Spray System spray.xact food 1000 mm Spray Grease System Precise, cost-effective, and highly reliable: Meet spray.xact, the next generation of contact-free spray lubrication. Designed for ultimate flexibility, this system applies oils and other media with pinpoint accuracy using a high-frequency valve and a single-substance nozzle. Unlike traditional compressed-air systems, spray.xact eliminates unwanted oil mist entirely—meaning you can skip the expensive extraction systems. The result? A low-wear, low-maintenance, and highly economical solution perfect for stamping, forming, fine blanking, and rolling mills. Technotrans offers tailored configurations to fit your exact needs: - spray.xact b: A flexible, modular design built for easy retrofitting in tight spaces. - spray.xact c: A compact, highly service-friendly unit enclosed in a robust stainless-steel housing. Both configuratio ...

Semi-automatic keg handling machine for internal cleaning, steaming and filling of kegs with beer, wine, soft drinks. Designed for filling 30 liter and 50 liter plus kegs with flat fitting of the Micromatic round type. Nominal capacity: 40 - 50 keg/h depending on the type of beverage and the selected treatment times. Equipped with 4 treatment stations: - 3 interior cleaning stations - 1 filling station CIP station: - caustic tank, rectangular, with feed pump on elevated frame with feet - Acid tank, rectangular, with feed pump on raised frame with feet, Additional title: cleaning and filling, Capacity: 50 keg/h, Working pressure: 7 bar, Voltage: 220/380 V, Frequency: 50 Hz, Length: 2,0 m, Width: 2,0 m, Height: 2,0 m, Formats: 30 and 50 liter Plus kegs with A-type fitting of the Micromatic round type, Operation / Control: semiautomatic, Material: stainless steel construction as frame, pipi ...

This used keg filling system from m + f KEG-Technik GmbH & Co. KG (built in 1989) is a reliable solution for cleaning and filling kegs with a capacity of up to 30 kegs per hour. The machine is equipped with two heads for filling and cleaning as well as two CIP tanks, ensuring efficient and consistent operation. It supports flat and basket formats and is controlled via Siemens S5. Thanks to its robust construction and compact design, this system is ideal for breweries or beverage manufacturers looking for a proven and cost-effective solution. Our team at VBW Asset Trade will be happy to answer your questions., Capacity: 30 Keg/h , Pressure: 5 bar, Length: 2,40 m, Width: 1,90 m, Height: 2,10 m, Weight: 400 kg, Formats: flat- and basket-fitting, Operation / Control: Siemens S5, Features: 2 heads (both filling and cleaning), 2 CIP- vessels

3 cylindroconical fermentation and storage tanks with frame and cone cooling, Additional title: vertical stainless steel tanks with frame and cone cooling, Total volume: 3000 l, Pressure capacity: 3 bar, Length: 1860 mm, Width: 1860 mm, Height: 3700 mm, Material: stainless steel, Base construction: standing on feet, Features: frame and cone cooling, sampling tap, DN50 connection; panel with valves;

Impressions=0 m, Condition= New , Availability= 2026-07-07, Servo Feeder Pre-Folding Section Side Gluing Crash Lock Bottom Bottom Gluing Unit (Left Side) Folding and Closing Section Motorized Trombone Section Folding and Closing Section Pressing Unit KQ” Brand 3 Cold Glue Guns Pneumatic Press LED Display Maximum Carton Weight: 800 g/m² Carton Type: B, N, E & F Flute Maximum Speed: 500 m/min Max. Folded Carton Thickness: 15 mm

Impressions=0 m, Condition= New , Availability= 2026-07-07, DGM AUTOMATIC DIE CUTTING MACHINE • TYPE : TECHNOCUT 1050-S (with STRIPPING UNIT) • SIZE : 74 x 105 cm • YEAR : 2024 (BRAND NEW) DETAILS : Carton board min. =80 g/m2 Carton board max. =2000 g/m2 Corrugated board max. =4 mm Sheet size min. =350 x 400 mm Sheet size min. =740 x 1050 mm Speed =7500 s/h Cutting force =300 Ton Cutting size max. =730 x 1040 mm Gripper margin min. =9.5 mm Feeder =1600 mm Delivery =1300 mm

Used HDPE Blow Molding Machine TECHNE 10000SFA up to 1690 bph The Used HDPE Blow Molding Machine TECHNE 10000 SFA up to 1690 bph advances the field of HDPE container blow molding machines significantly. TECHNE manufactured this machine in 2002, equipping it with cutting-edge technology and technical specifications that make it high-performance and reliable. Capacity and Implemented Technologies of the HDPE Blow Molding Machine TECHNE The HDPE Blow Molding Machine TECHNE produces containers with a capacity of up to 1 liter. Additionally, it uses coex-3 layers technology to ensure container quality and consistency. The machine features an 8-cavity extrusion head with a center distance of 105 mm, allowing for efficient production of 8 bottles per cycle. Furthermore, the linear cold blade cutting system and pneumatic pick-and-place system enhance operational efficiency further. Efficiency an ...

Used Linear Magnetic Flowmeter Filler – Overview This second hand linear volumetric filling machine is engineered for PET and HDPE containers up to 5 L, ideal for used bottling line upgrades in beverage production and industrial packaging. Equipped with 6 magnetic flowmeter dosing nozzles in 316 stainless steel, a CE-compliant HMI/PLC platform, and a hygienic stainless-steel build, it delivers accurate, repeatable fills for still water, detergents and liquid soap. Technical Specifications & Performance Data Core configuration Model: Linear 6-nozzle magnetic flowmeter filler up to 5 L Filling principle: Volumetric dosing via magnetic flowmeters (non-isobaric) Nozzles: 6 x 316 stainless-steel filling nozzles with individual magnetic flowmeters Container materials: PET and HDPE Container size range: up to 5 liters Applications: still water, detergents, liquid soap and similar non-carbonat ...