We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,433 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Built in 2001 Capacity single straps up to 40 straps/min Capacity parallel straps up to 20 straps/min Capacity cross straps up to 18 straps/min Size packaged good width max 450 mm min 200 mm Size packaged good length max 320 mm min 200 mm Size packaged good diagonal max 560 mm Size packaged good width single/parallel max 580 mm min 180 mm Size packaged good height max 400 mm min 10 mm Strap Polypropylenband width 5 mm Thickness min 0,35-0,55 mm Reel bead wire diameter 200 mm Reel external diameter app.450 mm Width 160/180/200 mm Electric supply 400/50 V/Hz Weight 510 kg (approx.) Equipment cross strapping with integrated turn table ; working condition
used
AUTOMATIC TWIN TABLE SLOT MORTISER Type BALESTRINI 2/CAP RECONDITION MACHINE Max oscillating length mm. 120 Max. mortise depth mm. 80 Spindle collect diameter mm.13 Max. bit diameter mm. 20 Spindle motor power: Hp 3 Oscillating motor power: Hp 1 Spindle rotation: rpm 9000 Volt. 380/50
THICKNESS: 0.014 - 0.030 mm, DOUBLED FOIL THICKNESS: 0.028-0.060 MM;
used
This machine is particularly suitable for the processing of electric wastes with PVC, rubber, iron and lead. Processing of the cable pages at the same time. - cut the cable of 2 pages in diameters ranging from 30-150 mm - are is carried out in the two-blade system either both knife independently to adjust continuous or foot control can be set at Dashboard roles system to the Insert the cable in the machine fast and simple replacement of the MesserDurchmesser cable: 30 to up to 150 mmTrenngeschwindigkeit: 12 meters per MinuteAntriebsleistung: electric motor 6 KW / 380 VGesamtgewicht: 600 KgAbmessungen (Lxwxh) : 1800 x 1000 x 1200Anzahl of the blade: 2 StückMesserverstellung: mechanical
used
ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.
used
Description Accessories available Technical data: Procedures Route x 500 mm Y way 500 mm Z way 380 mm Table size 350 x 800 mm Speed 50-2240 Rev/min Machine dimensions approx. 1.8 x 1.8 x 1.7 m Weight approx. 1650 kg
used
- X: 1050 mm - Y: 920 mm - Z: 110 mm - table size: 1000 x 1000 mm - speed range: 18.000 rpm - taper fixture: SK 25 - tool changer: 6-station - max. workpiece dimension: Ø 65 mm, hight 65 mm - control: Bosch CC 120 - total power: 12 kW - weight of machine: 900 kg - space requirement (W x D x H): 1,7 x 1,9 x 2,0 m Details milling motor power 4 kW vacuum pump 25 m³ / h very good condition, immediately ready for use servo motors in the axes has run less than single-shift accessories 6 units with collets 14 collets vacuum pump suction with 4 m suction hose machine feet documentation tool presetting device with depth gauge PAV Vario
used
Molding machine of Mag Type: Ergotech 100-310 compact control: NC 4 year of construction: 1997 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 590 x 590 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168.3 Spray pressure bar: 2640 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP 12,Pneumatikventil
used
Product: injection molding machine Rubric: injection moulding machines Make/model: Krauss Maffei KM 320-1900 C3 Year of construction: 1999 Krauss Maffei injection moulding machine Type: KM 320-1900 C3 control: MC4 year: 1999 Clamping unit Clamping force t 320 Gap mm: 920 Holm dimension mm: 710 x 710 min/max height mm: 380 Plate size: 1060 x 1095 Injection unit Screw diameter mm: Gr 70 injection weight: 954 Injection volume cm m³: 1048 Spray pressure bar: 1778 Dimensions and weights Dimensions Lxwxh m: 6.75 X 2.15 X 2.4 machine weight kg: 16,300 Miscellaneous C3 SYSTEM EUROMAP 12 interface
used
Standard ALB ear performance: 30 mm Thread cutting performance: M 20 (option) Thread: M 12 Spindle: MK 3 or SK 30 (option) Quill stroke: 100 mm Longitudinal / cross travel: 350/160 mm Distance spindle/cross table: 80 to 450 mm Table area: 600 x 240 mm Column diameter: 110 mm Total height: Max 1,920 mm Weight: 340 kg Motor pole shift bar: 0.8/1.5 kW Spindle speeds, continuous, selectable: 10 spindle speeds: 80-1,400 rpm 10 spindle speeds: 120-2,160 rpm 10 spindle speeds: 160-2,800 RPM Facilities: A versatile, accurate and handy drilling milling machine. The quiet-running drive and a perfect clamping of Quill guarantee good surfaces when milling. The headstock can be swung out. The stage is precise and precisely adjustable. Pitch 0.05 mm. clamping device for both axes. Full motor protection. Machine incl. Cabinet.
used
Make/model: Krauss Maffei KM 450-3500 C3 Year of construction: 2004 Krauss Maffei injection moulding machine Type: KM 450-3500 C3, ACCU control: MC4 year: 2004 Clamping unit Clamping force t 450 Gap mm: 1170 Holm dimension mm: 900 x 800 min/max height mm: 480 Plate size: 1270 x 1230 Injection unit Screw diameter mm: 80 Injection weight gr: 1544 Injection volume cm m³: 1754 Spray pressure bar: 2205 Dimensions and weights Dimensions Lxwxh m: 7.98 x 2.35 x 2.55 machine weight kg: 26,000 Miscellaneous C3 system EUROMAP 12 interface
used
Krauss Maffei injection moulding machine Type: KM 650 / 8000 BM control: MC 3 year: 1992 Clamping unit Clamping force t 650 Gap mm: 1150 Holm dimension mm: 1000 x 900 min/max height mm: 600 / -. Plate size: 1430 x 1350 Injection unit Screw diameter mm: Gr 115 injection weight: 4345 Injection volume cm m³: 4830 Spray pressure bar: 1656 Dimensions and weights Dimensions Lxwxh m: 13.1 x 3.1 x 2.4 machine weight kg: 52,000
used
Vertical internal broaching machine, used Vertical internal - broaching machine. used Type / type: RITS 16 x 1500 x 500 Manufacturer / make: Artur Klink year / new: 1995 Biggest tensile strength / maximum pulling power: 16 t Max stroke length / max broaching length: 1500 mm Table width / table width: 500 mm Räumgeschwind. / broaching speed: 1..6, 4 m / min Rücklaufgeschw. / return speed: 19.5 m / min maximum tool length / max length of tool: 1700 mm Power consumption / connected power: 42 kW Size / weight: 16 t Specification: optional spaces right or left, and at the same time right and left / / 2-jobs broaching right or left / right and left at the same time
used
Ferromatik injection moulding machine Type: Milacron Elektra 100s 27000 runhour, full electric control: IQT year: 1997 Clamping unit Clamping force t 100 Gap mm: 920 Holm dimension mm: 470 x 470 min/max height mm: 250 / 520 Plate size: 690 x 690 Injection unit Screw diameter mm: Gr 40 injection weight: 180 Injection volume cm m³: 201 Spray pressure bar: 2530 Dimensions and weights Dimensions Lxwxh m: 7.6 x 1.8 x 2.2 machine weight kg: 6930
Molding machine of Mag Type: Ergotech 100-400 Viva control: NC 4 year of construction: 1998 Clamping unit Clamping force t 100 Gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 /. Plate size: 580 x 580 Injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm m³: 231.1 Spray pressure bar: 1828 Dimensions and weights Dimensions Lxwxh m: 4.25 x 1.27 x 1.79
used
Molding machine of Mag Type: Ergotech 50-200 Control Panel: NC 4 year of construction: 1993 Clamping unit Clamping force t 50 Gap mm: 400 Holm dimension mm: 320 x 320 min/max height mm: 210 Plate size: 530 x 540 Injection unit Screw diameter mm: Gr 25 injection weight: 54 Injection volume cm m³: 61.3 Spray pressure bar: 2740 Dimensions and weights Dimensions Lxwxh m: 3.7 X 1.4 X 1.7 machine weight kg: 3250 Miscellaneous HEATING CHANNEL CONTROL 4 COMPARTMENT
used
5-axis controlled milling centre Control: E 160 CNC Work piece clamping: 2 axis cradle type with tool-taper clamping Indexing of work piece cradle (A/B) full rotary and tilting controlled Traverses: X 1050 mm Y 420 mm Z 420 mm Spindle motor rating: 9 kW Spindle speeds to: 4000 rpm Gear steps 2 Torque: 450 Nm Pick up magazine tool positions: 15 with 2 places for extra large tools Tool taper: ISO 40 Equipped with: 2 Axis clamping system for parts, taper ISO 50; Vertical milling head ISO 40; Full guarding; Pick up magazine for 15 tools; VERY LITTLE USAGE AND ONLY WITH CUTTING OILS; Excellent
Molding machine of Mag Type: Ergotech 60/420-310 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 60 Gap mm: 450 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 600 x 600 Injection unit Screw diameter mm: 35 Injection weight gr: 149 Injection volume cm m³: 168 Spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.1 x 1.36 x 1.8 machine weight kg: 3.950 Miscellaneous 1 x 2 battery pump system
used
; see pictures
used
used
used
Molding machine of Mag Type: Ergotech 25-80 compact control: NC 4 year of construction: 1994 Clamping unit Clamping force t 25 Gap mm: 350 Holm dimension mm: 280 x 280 min/max height mm: 105 /. Plate size: 390 x 390 Injection unit Screw diameter mm: Gr 22 injection weight: 37 Injection volume cm m³: 42 Injection pressure bar: 2061 Dimensions and weights Dimensions Lxwxh m: 3 x 1.05 x 1.9 machine weight kg: 1550
used
used
used
used
see picture - on Anfr.
used
Battenfeld injection moulding machine Type: BA 13000 / 7700 HM control: Unilog 9000 year: 1996 Clamping unit Clamping force t 1300 Opening stroke mm: 1650 Holm dimension mm: 1600 X 1250 min/max height mm: 800 / 1400 Plate size: 2220 X 1880 Injection unit Screw diameter mm: 120 Injection weight gr: 5146 Injection volume cm m³: 5655 Spray pressure bar: 1361 Dimensions and weights Dimensions Lxwxh m: 14 X 3.2 X 2.54 machine weight kg: 82,500/14500 Miscellaneous 2 + 2 core pull EUROMAP 12 INTERFACE
used
used
Accessories
used
used
ARBURG injection moulding machine Type: 420 V 800-150-150 2Component, with turntable controller: SELOGICA year: 1998 Clamping unit Clamping force t Gap between 80 mm: 500 Holm dimension mm: 420 x 420 min/max height mm: 250 Plate size: 545 x 545 Injection unit Screw diameter mm: 25/25 Injection weight gr: 49/49 Injection volume cm m³: 54/54 Spray pressure bar: 2500 Dimensions and weights Dimensions Lxwxh m: 4.7 x 1.7 x 2.1 machine weight kg: 5000 Miscellaneous 2 Component with turntable (with turntable)
used
new
Fully automatic labeling system to provide bottles on both sides with a label. This machine is a "new exhibition machine" Further we can announce details by mail. You will find more machines under: abc://abc.resale.de/angebotelinkd-user.php?myid=35837 & dealer = 1 & order = 1 & or abc://abc.resale.de/angebotelinkd-user.php?myid=35846 & dealer = 1 & order = 1 &
used
used
used
used
used
used
M. No.: 1395
used
Halbautomatischer pneumatically operated hand filler, ATEX compliant, any filling volumes from 20-1000 ml with different dosage piston, higher dosing volumes with multiple hub possible, suitable for filling liquid and semi-solid products
used
see picture attached
used
Description The machine was Teilrevidiert Technical data: Usable area of table 1100 x 255 mm Table movement: Longitudinal/vertical/horizontal 700 / 430 / 250 mm Spindle speeds 38 1500 rpm. Recording ISO 40 Dimensions L/W/H 2260 / 1720 / 1650 mm machine weight approx. 1650 kg
used
Description -Pivoting milling head -Coolant system Technical data: Table 250 x 500 mm Travel ca X/Y/Z 330 / 400 / 475 mm Speed 63-2800 RPM. Quill stroke 60 mm Dimensions of 1100 x 1400 x 1600 mm machine Recording ISO 30 continuous feed Machine weight approx. 950 kg
used
very well preserved, fully reconditioned MAZAK laser machines with 1500W Table format: 2500 x 1250 mm minimal footprint by 2, 6 m x 6, 5 m Small part conveyor completely encapsulated engine cover FE: up to 12mm VA: up to 6mm Plastic can incl. software including warranty incl. extraction incl. commissioning + training
used
Description The machine was without Accessories: Spannznangen, div. end mill holders. Technical data: x away the 300 mm y away 150 mm z away 340 mm Table 210 x 600 mm Spindle speeds 40-2000 RPM. Feed 10 500 rpm. Recording ISO 40
used
Description Digital display, route and position control HEIDENHAIN specifications: Traverse path x/Y/Z 400/410/400 mm Table size 800 x 450 mm Speed of 30 RPM/2240 Feed 1-750 mm / Rev Rapid traverse 2000 mm / min Toolholder SK 40
used
Description Feeds in all 3 axes adjustable Digital display, route and position control HEIDENHAIN TNC technical data: Traverse path X / Y / Z 500 / 500 / 400 mm Speed range 30-2240 Rev/min Spindle speeds 24 Feed range 1 750 mm / min Rapid traverse in all feed directions 1500 mm / min Size 450 x 800 mm Weight approx. 1400 kg
used
Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
used
Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg
used