129,000 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Well preserved complete width frame - creel system LINCK type BV. Right-wing machine. Frame width 760 mm, stroke 600 mm, passage height max. 710 mm. Complete with log feeder, creel car with auxiliary car. Splitting wedge with roller conveyor, transverse take-off and model return. Creel with new saw clamps. Countershaft and frame including 132 kW motor with belt drive 310 1/min. Various spare parts can be purchased in a package. Dismantling on your own. Dismantling can be offered completely truck loaded.
Very well preserved, almost new KÄLIN grinding/planing machine. Year of manufacture 2009/2010 Type Caster IPC 6.000. Only in use for a very short time. Very well preserved, almost new machine with all engines and accessories for the production of up to max. 6 to/h of sanding wood. System complete with Siemens S 7 control, grinding equipment and grinder type Grinder SL 800 and all planer heads, along with a set of spare cutter heads. Extraction system and complete conveyor technology for chip transport. Machine professionally dismantled, ready for takeover immediately. Warehouse location in southern Germany. Viewing is possible at any time. /
Very well preserved compact drying chamber MÜHLBÖCK type QLSF-2x1,2-3x1,2-13 / Built in 2004. Complete system including control. Heat requirement 330 kW. Plant still in operation! Complete transport by truck is possible. Only the counterweight has to be dismantled. If necessary, the matching heater can also be supplied. Dismantling/transport possible on your own. Dimensions / data: see attached drawing
Cambio 800D, 6 Arm AirTen, built in 2018. Well preserved Cambio 800 with 6 x direct drive, latest current model! 90 kW rotor drive! Each individual spiked roller is driven by 4.0 kW each. AirTen rotor with 6 tools. Feed up to max. 120 m/min possible. To sell on behalf of a customer. Machine can be viewed at any time.
Used complete debarking system with CIM feeder, Cambio 71-75 5-arm AirTen rotor and pull-out control unit. Attachment immediately free.
Automatic complete impregnation system IWT, B.J 2002. Diameter 1.8 m. Length 18 m. Impregnation including impregnating agent container. Including all pumps. System can be set at an angle, inlet on both sides.
Original LINCK chain conveyor with steel carriers length A-A approx. 6,500 mm
LINCK double conveyor belt for side goods. Condition good and usable. Length approx. 8,000 mm
Complete powerful planing mill with WACO 6 shaft planing machine, double cut-off band saw Möhringer, complete mechanization, moisture measurement, control, etc. etc. Output approx. 2,500 m3/month and shift. Depending on the dimension Facility consists of: Tilt destacking, single piece allocation, Brookhuis moisture measurement, Braun Canali double band saw, small coil bundling with Böhl small coil formation and feeding to stacking machine, 2 x stacking machines with battening, complete packaging line with film dispenser, package press with lower squared timber insertion. The complete Siemens control system, the entire steel substructure, all cabling, pipes, etc. Very well maintained plant for the production of slats, spring groove, 2 by dimension lumber etc.
Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!
Boiler Polzenith 1.6 MW, built in 2007 Very well preserved combustion plant make Polzenith 1.6 MW heating capacity. Complete system included - Fuel stock. Steel construction with moving floor - Scraper conveyors - Beth electrostatic precipitator with electric cabinet - Chimney height approx. 12m - All flue gas lines - Complete with switchgear and hydraulic system System professionally dismantled immediately ready for loading.
As good as new band saw stand EWD, 17° tiltable! Roller diameter 1800 mm. Absolutely as good as new, as it has only been in operation for a very short time. Year of manufacture 2010. 90 kW drive power, with adjustable belt guide. Includes hydraulic system.
Very well preserved, rarely used grinding machine Weinig Tyo RONDAMAT R 980 for planer heads
Washing machine for planer heads Weinig type MTS Very good condition. Fully operational with Simatic OP 7 controller. Operator's manual. Machine can be taken over immediately.
Root End Reducer B&Z Type WRP SO Well-preserved fully functional root end reducer made by Baljer and Zembrod. Built in 2004. Complete with control, disposal scraper conveyor straight approx. 8.0 m and ascending approx. 6.0 m. Including hydraulic log ejector. The hydraulic power unit with 15 kW is included in the scope of delivery, we also have the remote control for the control of e.g. sorting trolleys. Complete steel substructure. Length of milling shaft 1,380 mm. Drive of milling shaft with 75 KW motor. Feed motor slewing gear with 4.5 kW. Drive scraper conveyor with 3.0 kW.
Key data: 500 mm, 120 mm
Resawing saw – trimming saw MEM Cobra Year of construction approx. 1995, completely overhauled. Very good condition! Cutting height max. 120 mm, passage width max. 1070 mm. 4 axes variable. 2 x 55 KW drive power saws. Refurbished machine. Optionally, we can make a completely new Spreissel separator (see sep. Photo last page) and sawing axes positioning control (see photo) Plant immediately available for takeover!
Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own
Pipe belt conveyor in mint condition VECOPLAN type VRF 500 P. Never used before! Including drive station and deflection station, without belt! Drive station with 15 kW Flow rate approx. 200 m³/h Length approx. 65 running metres, diameter 500 mm
Pendulum saw/cross-cut saw type PS 50/F built in 2025 with support table As good as new, never used cross-cut saw with support table re/li total 2,700 mm, incl. 2 x rollers. Saw blade diameter 500 mm. Cross-cut depth max.: 145 mm, cross-cut width max. 510 mm 5.0 kW drive power
Metal detection coil Metron including conveyor trough and protective tube "Durit tube" Coil diameter 600 mm Conveyor length approx. 7.0 m
