129,230 used machines on RESALE, but how to find them? Machine Search
An induction system ITG for heat treatment of workpieces with vertical chain lift system is available. Process: heating/hardening, number of inductors: 2, inductor type: copper coil, cooling: water cooling, connected load: 382kVA, rated current: 552A. Documentation available. An on-site inspection is possible.
Injection moulding machine Sumitomo Demag IntElect 150/520-610, built in 2007 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 150/520-610 Operating hours: 29,125 26,530 Cycle counter 3,562,329
Injection moulding machine Sumitomo Demag IntElect 210/580-1000, built in 2009 (without the handling / temperature control units / material supply [hopper, conveyor]). Sumitomo Demag IntElect 210/580-1000 Operating hours: 27,297 25,717 Cycle counter 3,450,308
Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system with its small dimensions of 188 x 80 x 98 mm can be easily installed in or on production plants. The print head reaches top speeds of more than 180 m/min and has IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is via an i-Logic button. In addition, maintenance statuses can be shown on the display. The Integra One is particularly compact with dimensions of 188 x 80 x 98 mm and was specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard Cartridge Monitoring identifies the current ink type and autom ...
Interroll Rising falling Incline belt conveyor with leading belt GF 4778 (3888+890)-690-580 RA2365 Technical data: Conveyor length (NL): 4778 mm ( 3888 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4778 (3888+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type: ...
Interroll Rising falling Incline belt conveyor with leading belt GF 7028 (6138+890)-690-580 RA2366 Technical data: Conveyor length (NL): 7028 mm ( 6138 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 7028 (6138+890) Nominal / outside width in mm: 690 Belt width in mm: 580 Driven: YES Engine type: ...
Interroll Rising falling Incline belt conveyor with leading belt GF 19782 (810+175+17907+890)-690-580 RA2363 Technical data: Conveyor length (NL): 19782 mm ( 810 + 175 mm arch + 17907 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 19782 (810+175+17907+890) Nominal / outside width in m ...
Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...
Reach: 1960mm, payload: 60kg, axes: 6, positional repeatability: +/-0.06mm, path repeatability: +/-0.09mm, base dimensions X/Y: 920mm/640mm, weight: approx. 1040kg, operating hours: 32367h. The Profinet IO device module is missing. Documentation available. An on-site inspection is possible.
Used spiral mixer DIOSNA, type: SP 180 A -in very nice condition- - Including 5 tank cars - Kettle for 180 kg dough or approx. 110 kg flour - With plastic hood and inlet for ingredients - the upper V-belt is NEW - In some cases, the wheels of the tank cars were renewed - Machine and boiler frame repainted - The machine runs very smoothly (a video can be sent) - the hydraulics are in good condition - The machine is perfect for sourdoughs - The machine has been technically completely tested - Condition: very good, ready for immediate use 3 pieces of the 5 boilers have some very fine hairline cracks. In our opinion, however, a repair is not necessary. However, these boilers can also be welded on request. The other 2 boilers are in very good condition and without cracks. We are happy to send you more information and photos. Viewing and test run are possible by arrangement. ...
CLAMPING FORCE: 150TON PLATEN SIZES: 1295 X 990 DBTB: ROTARY TABLE 1520 MIN MOULD HEIGHT: 300 MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 700MM SCREW DIAMETER: 40MM INJECTION PRESSURE: 2678BAR STROKE VOLUME: 283CM3 SHOT WEIGHT (P/S): 257GR CONTROLS: UNILOG B6 MOTOR: 22KW HEATING CAPACITY: 12.1KW SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 1 HOT RUNNER: 8 ZONE INTERGRATED ADDITIONAL: HORIZONAL INJECTION VERTICAL CLAMP
Height=1.89 m, Overall length= 0.57 m, Overall width= 2.47 m, Net weight= 61 kg,
Height=1.39 m, Overall length= 2.27 m, Overall width= 0.99 m, Net weight= 66 kg,
Height=1.56 m, Overall length= 0.86 m, Overall width= 2.16 m, Net weight= 250 kg,
Quantity: 6 pieces - price per piece Model No.: ABB IRB6640M2004 Variant: IRB 6640-235/2.55 Year of production: 2012/2013 Axles: 6 Load capacity: 235 kg Reach: 2550 mm Repeatability: ±0.1 mm Weight: 1310 kg Control: IRC5 M2004 Power supply: 400 VAC, 3-phase, 50/60 Hz
Memmert Precision Incubator 256 litres Manufacturer: Memmert Model: ICP 600 Temperature: 0°C to 60°C Volume: 256 litres Power: 700 W Interior width: 800 mm Interior height: 640 mm Interior depth: 500 mm Device width: 958 mm Device height: 1335 mm Device depth: 656 mm Max. number of slide-in plates: 7 Max. load per slide-in plate: 30 kg Max. load per device: 80 kg Weight: 144 kg More items - new and used - can be found in our shop! International shipping costs on request!
Robot ABB Robotics IRB 1600 8/1.45 IRC5 M2004 , complete Control: IRC5 M2004 Number of axes: 6 Max. load capacity: 8 kg Max. working range: 1450 mm Year of Make: 2008 Scope of delivery: robot, controller, cable, teaching panel, circuit diagrams 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Forwarding costs on request or pick-up on site.
Robot ABB IRB 2600 20/1.65 IRC5 M2004 , mechanics only Number of axes: 6 Max. load capacity: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of delivery: robot mechanics 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Shipping costs on request or pick-up on site. Price indication per item.
Agilent 5110 SVDV which YOM 2018 for sale. It's an complete set including chiller, autosampler SPS4 and software.
Automatic washing line for IBC containers manufactured by Pohjaranta Oy. Manufacturer: Pohjaranta Oy Finland Type: IBC-PK1 Model year: 2013 Feed conveyor, line of 8 containers Junction station Control center, Siemens Various washing programs, heating of washing water, conductivity Automatic wash / manual program Condition: Slightly used, in very good condition Has been in a warm and in a dry production environment in working condition.
Robot ABB Robotics IRB 2600 20/1.65 IRC5 M2004 , Multimove 12 axes , 2 robots Number of axes: 12 Max. load capacity: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of delivery: 2x robot mechanics, control cabinet Multimove 12 axes, teach panel, connecting cables 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works.
Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China.
Approx. 4000 pieces of IBC standard containers used. Capacity 1000 litres Year of construction 2024 Pre-use for groceries. Emptied, but not washed. Substructure, plastic pallet. Location: near Magdeburg
Marka: ABB AB Model: IRB 6700 Rok budowy: 2016 Wymiary maszyny: Długość: 200 cm Szerokość: 200 cm Wysokość: 230 cm
A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.
Replacement column for IDRA 2500, D300mm x 7360mm, (1), 181091, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7360mm, trapezoidal thread TR 300 x 10, 4082 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 2500, D300mm x 7115mm, (2), 210779, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR 300 x 10, 3944 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 2500, D300mm x 7115mm, (3), 110850, Strate/Idra, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 2500, D300mm x 7115mm, trapezoidal thread TR300 x 10, 3944 kg New! The column was manufactured by Strate, is in its original packaging and is in the best condition and ready to use. We store them in a dry and thermally insulated room. The column can be visited, tested and picked up from us at any time. We will also be happy to send you a sketch of the construction or deliver the goods to your address. Attention! We offer various columns, adjusting nuts, spar nuts and 2-piece nuts: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7410mm, (4), 240186, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7410mm, trapezoidal thread TR330 x 10, 4972 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7115mm, (7), 220344, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Strate/Idra, used Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. That's why this column will be sold at a particularly low price. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
MEKITEC X-ray Inspection System – Maximum Product Safety for the Food Industry Manufacturer: MEKITEC (Finland) Type: X-ray Food Inspection System Year of Make: 2017 Input voltage: 110-220 V, 50-60 Hz Maximum generator power: 60 kV; 1.66 mA; 100 W Condition: good, fully functional Increase the quality assurance of your production with a MEKITEC X-ray inspection device – the reliable solution for the detection of foreign bodies and product defects in food processing. The compact system combines the highest detection performance with energy-efficient technology and is ideal for packaging lines of all kinds. ✅ Detection of metal, glass, stone, bone, plastic and other foreign materials ✅ Hygienic design according to food standards ✅ Easy operation and integration into existing production lines ✅ Reduces waste and ensures brand quality For uncompromising food s ...
Injector Model: BI 204 C Manufacturer: Inject star Stainless steel Power: 9kW Voltage: 3 x 400V/ 50Hz
Manufacturer: NanoFocus Model: Usprint 3D Inspection System with Bauman Year of Manufacture: 2014 Condition : Excellent Control Operation Voltage: 24 / 400 V Nominal Current: 17.3 A Electricity Type: 3-phase Frequency: 50 Hz Compressed Air: 6 bar Supply Line Fuse: 25 A (slow-blow), 16 A (fast-acting) Nominal Power: 4.6 kW CE Marked Find more here - / Contact us at -
ABB IRB 2600 20/1.65 Foundry Plus IRC5 M2004 Robot Number of axes: 6 Max. load capacity: 20 kg Max. working range: 1650 mm Year of Make: 2012 Scope of delivery: Robot mechanics,Control cabinet,Teach panel,Connecting cables 2 weeks commissioning warranty. No further warranty. In addition, spare parts are always available from stock. The robot is fully functional and can be visited. Freely loaded / ex works.
General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: ...
General SKU251M192 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/25-20 No.14078-02 Year of construction2005 Main Features MaterialStainless steel Motor11 KW Rotor150 mm Specified Features - Inline mixer MaterialStainless steel 1.4571 (316Ti) Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 50mm Outletdia. 50mm Motor11,0 KW, 400/690 Volt Rotor speed2930 Rpm Information Floorspace1,1x0,5 M Total height0,7 M Weight240 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0380 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.141724 Year of construction1970 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 400 Volt Information Total height1,1 M Weight1020 Kg Floorspace1,1x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0378 LocationBarneveld MakeAlpine Ultraplex Type500 UP beater plate No.135101 Year of construction1966 Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill MaterialMild steel Fine Impact Mills Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm Information Total height1,1 M Weight600 kg Floorspace1,0x0,9 MFine Impact MillsAlpineMills > Fine Impact MillsBrand > Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU227S107 LocationBarneveld MakeHosokawa Alpine (D) TypeLGM 20 ( Long Gap Mill ) No.P1172095 Year of construction2009 Main Features Motor500 KW Specified Features - Fine Impact Mill Grindercheck Rotor sizeDia. 1950x800 mm Grinding room sizeDia. 2000x760 mm With hoppercheck InletScrew (Schneckenbau Prestel) (2x dia. 125mm) Motor500 kW 400 Volt Speed1100 rpm Fine Impact Mills MaterialMild steel Information Total height3,0 m Weight22000 kg CEcheck Floorspace4,9x2,4 m ATEX compatiblecheck Extra Specificationsincluding Reitz fan type KXE 160-063030-00 (2009) 630 m3/h 2980 rpm 200 kW 400/690 volts including cyclone and heating unit with burner monitoring (as is ) Fine Impact MillsHosokawa AlpineMills > Fine Impact MillsBrand > Hosokawa Alpine What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for ...
General SKU212X066 LocationBarneveld MakeArde - Barinco TypeD6000 No.2182 Year of construction2001 Main Features MaterialStainless steel Motor3 KW Rotor90 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 90 mm InletDN200 Number of stages:1 Capacityapprox 20-285 ltr/min Motor3 kW, 400 volt, 1800 rpm With variable speed drivecheck With frequency controllercheck With vesselHopper Vessel sizes600x800x600 mm MaterialStainless steel 1.4401 (316) Information Mounted on framecheck Mounted on wheelscheck Total height2,10 m Weight380 kg With switchgearcheck Floorspace1,40x0,90 m Extra SpecificationsWith vibro motor, 0,35 kW, 220-240/380-415 volt, 1500 rpm. infeed screw conveyor, screw dia. 125 mm, : diaphragma pump Inline high shear mixersArde-BarincoMixers > Inline high shear mixersBrand > Arde-Barinco What you can expect from Foeth: -- ...
General SKU316X529 LocationBarneveld MakeJäckering TypeUnknown Main Features Motor30 KW Inlet diameter170 mm Width550 mm Specified Features - Fine Impact Mill MaterialMild steel, Stainless steel Fine Impact Mills Grindercheck Rotor size530 mm (4 rotors stacked) Grinding room sizeDia 540 mm x 700 mm With grinding platenscheck With hoppercheck 250x250x240 mm InletDia. 170 mm Feeding with vibro feedercheck Motor30 kW, 400/690 volt, 1465 rpm Speed2500 rpm Information Year of constructionUnknown Mounted on framecheck With switchcheck Floor space2,10 x 0,80 m Total height1,70 m Weight1800 kg Extra Specifications- With screw conveyor, 0,37 kW, 230/380 volt, 695 rpm - estimated output 150 kg/h: water evaporation ± 60 kg/h Fine Impact MillsJackeringMills > Fine Impact MillsBrand > Jackering What you can expect from Foeth: -- Machine is in working condition -- At a r ...
Adjusting nut for die-casting machine IDRA2500, TR300x10, 111814, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x375mm high. 260kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Adjusting nut for die-casting machine IDRA2500, TR300x10, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr300x10, D450x345mm high. 240kg Adjusting nut for die casting machine IDRA 2500 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500 The nuts are in their original packaging. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, 240186, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA3300, TR330x10, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr330x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 3300. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Tie bar expansion nut for die casting machine IDRA2500, TR300x10, 41460000210109, Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Tie bar expansion nut, Tr300x10, D470/410mmx325mm high. Approx. 200kg Tie bar expansion nut for die casting machine IDRA 2500. The thread runs out almost to 0 zero on the collar side. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Adjusting nut for die-casting machine IDRA3300, TR330x10, 081300, Strate/Idra, used Top Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition: Used-Top The nut is used and in top condition. Adjustable nut, Tr330x10, D500x375mm high. Approx. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Adjusting nut for die-casting machine IDRA3300, TR330x10, 121311, Strate/Idra, new Special price ! If you have a VAT number, we will gladly issue an invoice without VAT. Condition new The nut is new and fully functional. Adjustable nut, Tr330x10, D500x375mm high. 340kg Incl. bronze inlet ring Adjusting nut for die casting machine IDRA 3300 The nut has been preserved by us. The goods can be viewed, inspected and collected from us at any time. We will also be happy to send you a sketch of the design or deliver the goods to your address. Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
maximum number of results exceeded
please refine your search
