i cold used for sale

Previous use: distilled water Capacity: 100 L/H Material: glass Year: 1993 The unit includes : Level regulator Electrical control box Frame Pump Coil heat exchanger (1.2 bar max) Electric tank heater 5000W 200 litre glass tank Tubular exchanger (1.2 bar max) Photoelectric level Boiling chamber Stainless steel coil boiler: stainless steel 316 (1.2/1.5 bar max)

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Qty.1 Second-hand cold rolling mill Mfc.: Achenbach, INNSE/MINO Type: 4-Hi Revamped: 2015 Strip width: 1500 mm Thickness Entry: 6.0 mm Exit: 0.3 mm Run-out table width: 1600 mm Rolling speed: 600 m/min. Motors Mfc.: Simemotori Fire Protection System Lubrication system

closing pressure: 5980 kN clamping plate: . mm distance between columns: . mm total power requirement: kW weight of the machine ca.: 22,5 t dimensions of the machine ca.: m Spraying machine Manufacturer Acheson, Model DAG 1000 FCT S-B AB, Year of construction 2001, Foundry robot Manufacturer ABB, Model IRB 440F / 45, Control S4C-Plus, Year of construction 2004, trimming Manufacturer rice, Model SEP 7-20, An oven can optionally be purchased Manufacturer Westofen, Model W 80, Capacity 800 kg, Built in 1985 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 6246 : September 2023, Zwischenv : Italien : 3449 € : 300 x (2)2,5 x 32 mm : 33/66 U/Min : 45 ° : 45 ° : rund 102 mm, Quadratprofi : rund 90 mm, Quadratprofil : rund 80 mm, Quadratprofil : 1,5/2 kW : 500 mm : 1050 mm : 990 mm : 135 kg vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equipment saw blade protection material gauge pedestal 1 saw blade operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Igomak, Year: ca. 1970, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Stück/Durchmesser 100 ca, FREE TEXT: Heizplatte Oben/Veröängerte Tisch jede Seite 1000 mm, Year :ca. 1970

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

: gebraucht : 2022 : 6232 : prompt, Zwischenverkauf v : Italien : 4400 € : 1 : 350 mm : 350 x (2)2,5 x 32 mm : 30/60 U/Min : 45 ° : 45 ° : rund 125 mm, Quadratprofi : rund 105 mm, Quadratprofi : rund 70 mm, Quadratprofil : 1,8/2,5 kW : 600 mm : 1220 mm : 1060 mm : 206 kg DEMO MACHINE - MINT CONDITION very robust construction suited to cut metal profiles and solids (steel with resistance up to 70 kg/mm²) vice with quick clamping device and additional clapming strip for reduced cuttinag burr reduction gear and clutch to save the gear and sawing blades coolant equiptment sawing blade protection material stop thermic and magnetic motor protection 90° longitudinal cuts are possible thanks to the rotating vice pedestal 1 saw blade users manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 370 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 100 mm : 180x100 mm Working height: 925 mm saw blade turning speeds: 13 - 73 U/min total power requirement: 3,0 kW weight of the machine ca.: 0,95 t dimensions of the machine ca.: 1,9 x 1,45 x 2,1 m High-performance vertical circle saw, fully automatic hydropneumatic. · Miter left. 60° + right. 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Gear ratio, integrated into a stable cast housing Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts. Also included Quick lateral movement when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip clearin ...

Hoshizaki ice machine with Ice-O-Matic ice bunker, model ice machine: FM-170AKE-N-SB, serial number: H00781B, 220-240 V, 50-60 Hz, 3.5-3.9 A, refrigerant: R134a, dimensions ice machine:700 mm x 500 mm x 780 mm, dimensions ice bunker: 610 mm x 610 mm x 840 mm.

Year of construction 2009 like new condition, has worked only sporadically 1 year, Looks machine like new inside The machine is CNC controlled, for the mechanical structuring of thin-film solar cells. The processing heads move over that with a layer of molybdenum metal or other sputtered Glass, with a format 125 x 65 cm, and create an insulating track by material removal. The CNC control controls the movement of the X-, Y-, Z-, A-, and U-axis. all documents, Control Panel, and control are available Original price: 847.000,00 € The complete unit to build a 75MW of production are available. (1 x laser, 2 x mechanical structuring and setting device for needles) Geamt-new value 2.1 mill euro net

Type: PI 88 Number of needles: 88 Two pressure pump Needle diameter: 4 mm Max product: width 360 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 6.5 kW Machine dimension in cm: Width: 60 Lenght: 210 Height: 190 Delivery time: 30 working days after advanced payment

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IGA2008-AB0A/SL/IG0228 -Weight: 0.3 kg

Type: PI 21 Number of needles: 21 Needle diameter: 4 mm Max product: width 250 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 70 Lenght: 140 Height: 176 Delivery time: 30 working days after advanced payment

Refer to code 1054 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IF5219 (IFB3002-AP0G) -Number: 2x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IIA3010-BPKG -Number: 4x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IGA2008-FRKG/IG5596 -Number: 4x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: ITB 3001-BPOG -Number: 4x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IF5329 (IFA-3004-BPKG) -Number: 4x available -Price: per piece -Weight: 0.3 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IF5345 (IF-3004-BPKG) -Number: 4x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -M50 x 1.5 -Type: IN 50 60 40 -Number: 2x available -Price: per piece -Weight: 300 g

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IFA3002-BPKG/US-100-DPS -Weight: 30 g

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IEA2002-FROG/US-100-IRF -Weight: 25 g

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IGA2008-FRKG/US-100-IRF -Weight: 60 g

Description

Description

On and including 5 pallets

On and including 5 pallets

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IFC204 (IFB3004BBPKG/M/US-104-DPS) -Number: 13x available -Price: per piece -Weight: 0.1 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IIB 3015-BPKG -Number: 5x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IN5129 IN-3004-BPKG -Number: 2x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IF5252 IFB3004-BNOG -Number: 2x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IGA3008-APKG -Number: 3x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM -Product type: IIA3015-BPKG -Number: 3x available -Price: per piece -Weight: 0.2 kg

Inductive sensor, electronics sensor -Manufacturer: IFM, inductive sensor -Type: IGM207 -Number: 2x sensors available -Price: per piece -Dimension rolled up: 150/150/H20 mm -Weight: 0.3 kg/piece

proximity switch -Manufacturer: IPF Electronic -Product type: IN 40 60 40 -Number: 37x available -Price: per piece -Weight: 300 g

Inductive sensor, electronics sensor -Manufacturer: IFM -Type: IF5227 IFB3002-BPKG/MS -Connector: M12 x 1 -Switching distance: 2 mm -Number: 2x available -Price: per piece -Weight: 10 g

Inductive sensor, electronics sensor -Connector: M8 x 1 -Connection: 10-30 V DC -45 mm: long -Switching distance: 3 mm -Number: 2 pieces -Price: complete -Weight: 30 g

General SKU430T1359 LocationBarneveld MakeIKA werke GmbH TypeMHD 2000/5-ATEX No.07-6301 Year of construction2007 Main Features MaterialStainless steel Motor5.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia:60x15mm InletDN50 OutletDN32 Number of stages:1 Capacity700l/h With jacketcheck With mechanical sealcheck Motor5,5kW, 400/690Volt, 2880rpm (EX) Rotor speed6000rpm With vesselcheck Capacity100ltr Vessel sizesDia: 500x450mm MaterialStainless steel 1.4404 (316L) Information Mounted on framecheck Total height2,5m Weight550kg CEcheck Floorspace1,65x1,1m ATEX compatiblecheck Extra SpecificationsThis IKA Werke is equipped with additional items. A barrel of the brand AZO for mounting on top of the IKA Werke. Type: V150 Serial number: 15565-01-2007 Working pressure -1- 3.5 bar Test pressure: 5 bar Operating temperature:  ...

General SKU286U528 LocationBarneveld MakeIka-labortechnik TypeSuper dispax SD41 Year of constructionUnknown Main Features MaterialStainless steel Motor1.5 KW Rotor30 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 30x15mm InletDia. 15mm OutletDia. 15mm Number of stages:1 With mechanical sealcheck Motor1,5 kW, 220/380Volt, 2840rpm With frequency controllercheck Rotor speed4000-13000 rpm With vesselcheck Capacity±8Ltr. Vessel sizesDia200x300mm With jacketcheck MaterialStainless steel 1.4301 (304) Information Mounted on framecheck With switchcheck With switchgearcheck(as is) Weight80 kg Floorspace0,49x0,40 m Total height0,75 m Extra SpecificationsWith Janke &: Kunkel speed control, type DS2SO, 1500 watt, 220-240 voltInline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth ...

General SKU268M233 LocationBarneveld MakeJanke & Kunkel GmbH & Co. KG Staufen TypeSuper Dispax SD-40 No.257187 Year of constructionunknown Main Features MaterialStainless steel Motor1.5 KW Rotor30 mm Specified Features - Inline mixer Continuous reactor(1x) Rotor sizesdia. 30mm Inletdia. 15mm Outletdia. 15mm Motor1,5 KW, 220/380 Volt MaterialStainless steel Information With switchcheck Floorspace0,6x0,3 M Total height1,1 M Weight60 KGInline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU329S526 LocationBarneveld MakeIndag Maschinenbau GmbH (D) TypeDLM-1/3 HO (S) No.4315 Year of construction2006 Pressure Working pressure6.6 Bar Main Features MaterialStainless steel Motor3 KW Specified Features - Inline mixer Inletdia. 400 mm, dia. 35 mm, Outletdia. 35 mm With jacketcheck Motor3kW 220-240/380-415 Volts With frequency controllercheck Rotor speed400 rpm With vesselcheck Capacity49 Ltr. Vessel sizesdia. 400 x 650 mm With jacket19 Ltr. Max. temperature-10/100 °C MaterialStainless steel 1.4301 (304) Information Mounted on framecheck With switchgearcheck Total height2,5 M Weight450 kg CEcheck Floorspace1,8x0,9 M Extra Specifications With boiler: TWA GmBh &: Co. KG, SN: 015-2006-2542, 49 Ltr., max. working pressure: -0.95/4 bar, max. temperature: -10/100 °C, double-walled: 19 Ltr., max. working pressure: 0/4 bar, max. temperature: - ...

General SKU062F304 LocationBarneveld MakeImcatec TypeIMR-E200 No.0500 Year of construction1992 Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume193 Ltr. Motor31 KW Specified Features - Paddle dryer Turbulent dryercheck Capacity193 Ltr. Trough sizesdia. 600x670mm Inletchecktop connection Dia: 330mm OutletDia: 150mm With jacketcheck 24Ltr. Max. temperature158°C. With mechanical sealcheck Motor21,0/31,0 KW, 380 Volt With lump breakercheck Motor(manufacturer tag is missing) MaterialStainless steel 1.4401 (316) Information Floorspace2,5x2,2m Total height3,0mMinerals & inorganicAPIBiopharmaceuticalDyes & pigmentsAgrochemicalsSolid pharmaceuticsConfectioneryBiotechnologyOther feedAnimal feedOther chemicalStarchFine chemicalsSugarCosmeticsOther pharmaceuticsOintmentsGeneric medicinesPowder ...

General SKUR0855 LocationBarneveld MakeIKA Werke GmbH & Co KG TypeProcess Pilot 2000/4- ATEX No.05-5463 Year of construction2005 Pressure Working pressure5 Bar Main Features MaterialStainless steel Motor2.2 KW Rotor55 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesdia. 55mm Inletdia 25mm Outletdia. 15mm Number of stages:1 Max. temperature145 degr. C With mechanical sealcheck Motor2.2 kW 230/400 Volt (Ex) Rotor speed7900 rpm MaterialStainless steel 1.4571 (316Ti) Information Mounted on framecheck Total height1,1 M Weight220 Kg CEcheck Floorspace0,7x0,4 M ATEX compatiblecheck Extra Specificationswith barrel of approx. 15 liters (without lid) Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Rea ...

Ice cream counter Cold center R 4040 A Connection 230 V, 1.1 kW Used equipment not tested Dimensions approx. 1200 x 700 x 1250 mm, WxDxH

I offer a mercury analyzer for sample analysis: - liquid (tin chloride reduction method), - solids (thermal method). Detection method: non-dispersive, double-beam atomic absorption system with generation of cold mercury vapor. Detection limit: 0.002ng Measuring range: 0 - 1000ng.

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,

Properties < b >: < / b > Roll length: 430 mm Axle length: 470 mm Roll diameter: 50 mm Shaft diameter: 8 mm Material: Steel, galvanised 6-kant: approx. 11 x 11 mm Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to. Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects. Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer y ...