i cold used for sale

Wallace Micro Indentation Tester

IRHD Wallace Hardness Tester

Francis Shaw KO Intermix Year: Jan 1987 Approx. mixing capacity 1.8 litres Mawdsley DC motor, shunt wound, serial no. 180T827, 30kW, 460 volts, 74 amps, 1800rpm, continuous rating Apex Denison Hydraulic Pump Holroyd Gearbox Barco Rotary Joints Fortress Interlock system Water steam inlet Water steam drain Mixing Chamber Rotors Plunger Drop Door Grease points With Hopper Thorn EMI electronic star drive; 415 volts, 3 wire, 50 cycles, 54kva, November 1987 Operator Panel consisting of rotor speed, main motor current process timer, mix temperature Complete with control panel

Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate

Inv. Num. : 7836 Type: A26 Speedy Producer: IEMCA Created: 2016 Parameters: Side length: 3000 mm Length: 2370 mm Width: 1105 mm Height: 1890 mm Weight: 1850 kg Equipment: Automatic feeder SMART 320

Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible

Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data: Frame width (NB): 900 mm Frame width with Bearing cover: 950mm Frame width with Bearing cover and Motor: 1250 mm belt width (GuB): 800 mm height (BH): 250 mm Inner radius (IR): 900 mm Conveying angle: 45° degrees conveying speed (v m/s): 0,42-1,50 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2022 Height Sideguides: 200 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2022 condition: new Nominal / inner radius in mm: 900 Nominal / outside width in mm: 950 Belt width in mm: 800 angle: 45° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: freely adjustable scope of delivery: including side guid ...

Used bulk cartoner made by IMA model CP6. New 2013. Upgraded to the requirements of serialization of pharmaceutical products.

Motorized feeder for twin-shaft multi-blade saws: - length about 5.5 m, width of roller conveyors 550 mm - variable speed of the rollers from the control panel - 1 motorized upper wheel with pneumatic pressure - 2 side wheels with idle alignment and pneumatic pressure - supplied with inclined belt for unloading waste at the entrance, Suitable for working in line after an automatic cut-off machine Visible, installed and in operation until August 2025. Delivery availability from September 2025.

Fully functional Index Lathe Location of the machines: 76661 Philippsburg The machines can be viewed on site at any time. They are in our warehouse and work perfectly. You can make an appointment for a viewing at any time before bidding on +49 (0) 72 55 / 39 73 337. We would love to hear from you.

Transnorm belt curve conveyor left GKF 90°-600-400-IR1000 - NEW RA2307 Technical data: Frame width (NB): 600 mm Frame width with Bearing cover and motor: 850 mm belt width (GuB): 400 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 1000 mm Conveying angle: 90° degrees Conveying speed (v m/s): 1,0m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,75 / S1 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Frequency converter for stepless speed control Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1000 Nominal / outside width in mm: 600 Belt width in mm: 400 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,75/S1 Conveyor speed m / s: 1,0 scope of ...

coolant capacity: 20 m3l/h Headroom: 20 m operating pressure: 2 bar voltage: 380/660 V / 60 Hz motor type: LA 3166 motor speed: 1460 U/min Motor Capacity: 15 kW weight: 250 kg normal priming centrifugal pump, Housing and impeller made of stainless steel, Flange connections, Fabr. no. 22/00-125616 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-speed labeller for 2.25 ml Ypsomate Autoinjectors. The machine line consists of an automatic pallet management system for the autoinjectors packed on pallets in trays: a) Integrated Full Tray De-Palletizing with a first FANUC robot, which places the trays on a conveyor belt. On the same machine, the empty pallets are palletized with empty trays by a second FANUC robot. b) Machine where via the conveyor belt, trays transported with autoinjectors arrive at the next FANUC robot. This robot will pick up the autoinjectors in the laying position from the trays and put them upright into the feeder to machine c). The emptied trays will be transported back to machine a), where they will be picked up and put onto an empty pallet. c) Fully autom. rotary labelling machine IMA, type Sensitive Roto 720. Machine with two label dispensers for faster reel change (no downtime). Outp ...

LOGOPAK CARTON LABELLER, MODEL 410 III TB Year of construction: 2012 Labeler with fast and efficient real-time printing. Direct thermal or thermal transfer printing. LABEL FEATURES outer diameter: 350 mm running length: 600 m label roll width: 165 mm label dimensions: up to A5 print resolution: 203-300 dpi production: up to 120 labels/m

Offer 14044 Specifications: - 2-fold side edge belt sanding device - Sanding belt dimensions approx. 620 x 20 mm - Grinding equipment adjustable by handwheel - Support belt motor-driven - Support band dimensions approx. 2050 x 350 mm - Tilt-adjustable support strap - Table height approx. 950 mm -Mot. Grinding dust extraction - Drive 400 V - Space requirement approx. W 1100 x H 1450 x D 950 mm - Weight approx. 200 kg

IMEAS grinding cabin RCI/160 - RCS.2T/160 consisting of a lower and an upper satin finishing machine with two rollers.

S. No.: 6173431 Format (cm): 72 Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife Special feature: The machine was modified by GOP, so that 72x102 cm sheets can be cut. Condition: Very good condition / total revised about 1.5 years ago

1X RESERVE KNIFE FOR IDEAL 7225-55 EC3 LT Format (cm): 72

Dionex ICS 2000 Ion Chromatograph

Zeiss Prismo VAST Gold with rotary table Year of manufacture 1999 Retrofit Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Control C98 with control panel BP26_SE Roundtable VAST Gold probe Stylus Changing Magazine 13-Fold Stylus changer plate Pushbutton Accessories Calibration ball Technical documentation Other accessories Workstation with monitor Software Calypso Basic other options of your choice

ENIDINE HD 2.0 x 28 FMP Industrial Shock Absorber / Hydraulic Buffer – Heavy Duty Damper Sell a large ENIDINE/ITT Enidine Industrial Shock Absorber from stock. Data according to nameplate: Manufacturer: ENIDINE / ITT Enidine Type: HD 2.0 x 28 FMP P/N: FMP34530-R Heavy-duty hydraulic shock absorbers / industrial buffers For mechanical engineering, conveyor technology, crane systems, end stops, industrial plants, etc. The shock absorber is in a sturdy wooden box. Condition see pictures. Probably unused stock, but with traces of bearing and dirt. Function was not checked, therefore sold as stock goods/spare part. Important note: Do not open – component is under pressure according to the warning. Price: 500 € VB Pickup only due to size and weight. Private sale / stock liquidation, no guarantee, warranty or return.

specimen dia.: - mm length of specimen: - mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m Volumetric samples - cutter / sample punch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

M. No.: 322 Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Used ISERNHÄGER Sourdough Line ASB 600 RM - 3pcs available - Capacity 600 litres Visits and test runs are possible by arrangement.

koop Krohne Flowmeter Type: Optiflux 2050 DN 150 Serial Number: A 1907142 Order number: 3.0014 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459

IMA CP28BA Min./Max. box size: 220 x 120 x 120 mm / 600 x 400 x 350 mm Overall dimensions (W x D x H): 5000 x 1850 x 1900 mm Speed: 8 cartons/minute Weight: 1500 kg Compressed air: 6 bar Installed power: 2.8 kW Complies with CE standards

1 used ACM STAR 700 Vertical Bandsaw New in 2015, as is where is Including Transportdevice

Format range: max. 1000 mm, min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, 4-point gluing, motorised format adjustment, servo overhaul folding with program memory, Robatec electronic top gluing unit with 4 application heads, disc bottom gluing unit on the left, feeder with vibrator, belt crusher on the right, left up to max. 30 mm, additional central transport, folding floor module A2 with additional upper and lower centre transport, additional central transport in folding station, pneumatic kicker, counter, Bobst CUBE control, camera surveillance, Small box equipment, pneumatic press belt. Overhaul in 2026: cleaned, checked, painted and with new press belts as well as new feeder and transport belts. Other: Machine can be viewed by appointment while running.

Key data: 243 KW, 2200 1/min

We offer completely overhauled Scania DC/DI12-54/56A industrial engines in exchange. These engines have been certified by the Scania Service Partner overhauled with test bench certificate.We sell all engines in exchange.We sell for a surcharge even without returning old parts from the factory zeven/Germany. If you have any questions, please contact: MIW GmbH Engine Repair Plant Nord-West-Ring 8 27404 Zeven Geramny Phone:0049(0) 4281-950583 Mail: infoatmiw-zeven.de

length: 6000 mm width: 2500 mm height: 2700 mm weight of the machine ca.: 7,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capsule attachment for wine bottles. works perfectly.

Offer 24435 Specifications: - Table surface 1700 x 550 mm - Manual travels X / Y 1300 x 500 mm - Drill Fabr. MAXION , Type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drilling spindle holder MK 2 - Drilling spindle stroke with drilling depth fine adjustment 90 mm - PV 12 pneumatic feed unit - Projection 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm -Mot. Drilling unit stroke - Table clamping x + y - Minimum amounts of lubrication - Pneumatic connection 6 bar - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Transnorm belt curve conveyor right GKF 90°-700-500-IR450 - NEW RA2312 Technical data: Frame width (NB): 700 mm Frame width with Bearing cover and motor: 900 mm belt width (GuB): 500 mm height (BH): 220 mm height with motor (MH): 350 mm Inner radius (IR): 450 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0,67m/s Drive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,55 / S1 Year of construction: 2020 Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg Features: Construction year: 2020 condition: new Nominal / inner radius in mm: 450 Nominal / outside width in mm: 700 Belt width in mm: 500 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,67 scope of d ...

General features: Touch screen Multi-step cooking function Even heat distribution with two-way fan Adjustable cooking temperature between 0-300 °C Adjustable cooking time and digital display Door system with sensors Tempered glass Inner glass that can be opened for easy cleaning Stainless steel body Combined oven Dimensions: 990x1330x1240 mm Capacity of trays: 7+2/400x600 mm Electrical power: 15 KW+5.5 KW 380 V Weight: 360 kg Fermentation chamber Dimensions: 990x1330x770 mm Tray capacity: 9/400x600 mm Electric power: 3 KW Weight: 103 kg

Baking oven with fireclay strip Conveyor belt in refractory stone fillets Self-lubricated bearings for simplified maintenance Stainless steel front, sides, top, and interior The Eco button set the oven on standby during work pauses to save energy Digital control bake time and conveyor speed Conveyor Belt Width：800mm Electrical power: 17-34kW External dimensions: 95x145x110cm Maximum operating temperature: up to 450C