hydro power used for sale

Hydraulic unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic unit Year of construction approx. 1985 Operating pressure: max. 65 bar Volume flow: 20 litres/min. Tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece Hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and extending a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 Net weight: 142 kg good condition; used

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Ref.-No. 00624 Designation of the system of double-track timing belt conveyor with needle prederer Manufacturer Hydroautomation Model custom made needle engraving device suitable for rectangular pipes Built-in Markator Engraving Device Built 06/2017 In a conveyor belt, the following components are to be labelled with a needle preder from the company Markator. Before labeling, the part length is checked using an analog scale. Nio tested components are not labeled and must be removed manually Tubes ⃣ 35x20x1,25mm 35x25x1.25mm Length of pipes 380 ... 410mm Clock Approx. 12 seconds / tube Labeling time about 8 seconds / pipe Transport height 900x1050mm Conveyor length Ca 2500mm (approx. 45 components) Double-track timing belt conveyor with length test and marking station Length testing Labelling station Pneumatic lifter Manual adjustment Needle-pregnating c ...

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

Two hydraulic valves from Rexroth, two hydraulic pumps and 5 hydraulic cylinders are offered, all new and indispensable as spare parts 1. 2 Stueck Rexroth Valves MNR: R900912485 DBW 10 B2-52/315-6EW230N9K4 FD: 48121 2. Voac Parker Hydraulics made in Sweden Part No. 3708719 Type F11-058-M8-CF-K-000 Ser No. 2000180541 3. Brueninghaus Hydromatik D-72160 Horb A10VSO 71 DR / 31R PPA12N00 FabrNr: 1117486 Bauj. 04/96 DR = 280 bar Vo =71 cm3 n=1500 min 4. 5 unused, two-sided hydraulic cylinders with bearings Type 70/50-280-625 Length from middle hole to middle hole approx. 625mm Total length approx. 750mm Piston diameter 70mm Rod diameter 50mm Piston path 280mm Special price

Pump T&YC-014-1R00-B1-FP-46.0,18,5kW,60 l/min,Pmax 160 bar, Tank volume 30 liters

Roller spreader for rear mounting, drive via a 12 volt electric motor with overload protection (8 A). Container contents 120 ltr. , cam roller with interchangeable, asymetric cams (suitable for sand, salt and shards or granules)Roll width 125 cm, stirring shaft to prevent lump and bridge formation, low-wear 10-stage scattering volume regulation by adjustable spring bottom with rubber apron. With grating for accident protection and cable remote control (start/stop). Without growers! Scattering length salt approx. 5-6 km, sand approx. 1 km (manufacturer specifications) Built in 2012, unused, technically and visually as new condition, here and there paint somewhat repelled. Other roller spreaders, also trailers, self-loaders, drive hydraulic, PTO shaft or wheel stock. Winter service technology of all kinds, also slingshot spreaders, snow shields, snow blowers, tractors and used compon ...

pasteurizer for cream efficiency: 7500 l/h GEA plate heat exchanger valves and pumps : ALva Laval flow meters -Endress + Hauser Offer details and photos will be sent to the email.

Hydraulic Pump available for sale. Make: Hydrostar Type: SPV9M Serial Number: 2903900/R PN: 12.5 Vgn: 147.6 Nn: 1450 Made in Poland

used , ready for use Hydraulic unit was feed of a planing machine 200 m/min Electric motor 37 kW Flow rate 105 l/min Operating pressure 420 bar Oil tank 60 litres

Number of clamping stations: 0   Number of working units: 0   Total power: 0 kW (1) horizontal or (2) vertical Position workpiece stations: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Technical data Number of positions: 16 Number of positions with indexationNumber of posit: 8 Number of working positions: 24 Tool lenght: max: 150 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 6500 kg Overall dimensions machine: Length: 9800 mm Width: 4000 mm Height: 2900 mm Various accessories: Positions CNC: 2 pce Oil mist extractor: ELBARON Bar loader number of bars

Number of working units: 0   Total power: 0 kW Type: 0   CNC Brand: 0 CNC Model: 0 Technical data Voltage 50 Hz 3x: 380 Volt Spindle motor: 40 kW Machine´s weight about: 6200 kg Weight of the control about: 600 kg Overall dimensions machine: Length: 10606 mm Width: 4120 mm Height: 3400 mm

feed pressure: / bar liter capacity: / l power capacity: 55 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic pump for centrifuge

engine: 220/380/420 V ampere: 4.75/2.75 A motor speeds:: 1420 U/min. engine output: 1,1 kW weight: 100 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Design: Machine base and plinth integrated in a steel housing, composit concrete interior, Steel sleeves on the floor for fixing Table: welded steel plate structure Manufacturer: Framag hydropol Model: 7447 Overall dimensions: 3700x3200x3600mm Weight: 22000kg

There are two basins available, dimensions basin 1/ 2: 1600x1300x100/ 1000x1100x1000mm, each with a Pump HYDROSTAL.

Several compressors from the manufacturers Hydrovane and Beko are available. The compressors are only sold as a package deal. Individual machines cannot be sold separately.

Wheeled industrial crane with counterweight, max. load capacity: 1t, weight: 650kg, on-site inspection is possible.

Bar feeder LNS Hydrobar Type HYS 6.36HS-4.4 Year of construction 1990 the holes have the following diameters: 45, 41, 36, 30, 25 ,15,5 The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals!

Hydraulic pump HYDRO RENE LEDUC VDP 040.059435 G 350 bar 40 cm3/U max. 2800 rpm New !

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Wood cutter: with ETP Hydro-Grip -Outer: Ø 180 mm -Height: 46 mm -Socket: Ø 40 mm -Number: 2x milling cutters available -Price: per piece -Weight: 10 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -AKE wood router with: AKE Hydro-Grip -Outer: Ø 165 mm -Height: 60 mm -Socket: Ø 40 mm -Mill: 1 -Price: complete -Weight: 8 kg

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve, balancing valve -Manufacturer: TA Hydronics, line regulation valve regulation valve, unused original packaging -Type: STAF-SG DN50 PN25 -Number: 3x valve available -Price per piece -Dimensions cardboard: 220/170/H270 mm -Weight: 6.8 kg/pcs

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Rexroth Hydronorma, hydraulic unit -Hydraulic pump: Rexroth PV2V3-20/25R1MC 40 A1 -Motor: AEG 3 kW / 1420 rpm -Pressure: bars -Flow rate: l/min -Individual components: see photos -Hydraulic tank: tank capacity 120 l, with level indicator -Dimensions: 820/520/H880 mm -Weight: 232 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack, hydraulic station, Injection Molding Machine, Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Machine, Plastic Injection Molding Press -Manufacturer: Rexroth Hydronorma, hydraulic unit from injection molding machine Krauss HS 50 -Pump: Type 1PV2V-16 / 50RA01 MC160A -Motor: Bauknecht 7,5 kW / 1440 U/min -Individual components: see pictures -Dimensions: 790/340 / H400 mm -Weight: 133 kg

hydraulic lockbolt rivet gun, rivet gun, blind rivet gun -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Key data: 11 , 10 , 1360

Good condition, new oil and filter VAT not deductible Please inquire with location and postcode

Description: Fabrication number 2008/24081 , Projection approx. 1500 mm maximum capacity: 500 kg, Approx. Onsite Dimension. (l x w x h): 2,300 x 1,000 x 1,700 mm, weight approx.: 500 kg

Machine Type: Hydraulic Two-Column Press Manufacturer: HYDROMAK Model: P250T Year of construction: 1974 Condition: very good Offer Type: Used Machine Specifications: Compressive force: 250 t Projection: 620 mm passage Table: 610 x 610 mm Installation height: 385/515 mm Propulsion: 7.5 kW Remark: Two-handed and foot release Weight: 3200 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

HYDROIL CHA 80 mandrel bender. This machine has been completely refurbished with change of all hydraulic pipes, pressure gauge, joints and screws + epoxy paint Description: - delivered with 15 complete sets of tools ranging from diameter 17.2mm to diameter 50mm, including certain diameters with 2 different radii (new market value of a single tool: €2,500) - hydraulic clamping vice - hydraulic tightening of the follower guide - hydraulic feedback from the mandrel at the end of bending to facilitate extraction of the tube - mandrel holder rod length 2 meters (so reduced bulk) - possibility of increasing the mast, therefore the working length - maximum capacity: diameter 50mm, thickness 2 mm in steel - maximum bending angle amplitude: 180° - rotation speed of the bending roller: 28°/sec. - torque available at maximum pressure: 654m daN - electric motor: 5.5HP, 1500 rpm - ...

Description: Screw compressor with FriulAir air dryer Brand: HYDROVANE Year built: 2015 Motor: 7.5 kW Speed: 1,465 rpm Max. pressure: 11 Bar Air dryer: Brand: FriulAir Year of construction: 2015 Type: ACT12/AC Volume: Nom. 1,200 l/Min. Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,400 mm, weight approx.: 100 kg

automatic switch plate 1x saw unit with saw, head and saw valve 40/80 1x turning unit with turning valve 30/60 with flange 9x units 30/60 with valve normal and flanges 5x units 20/50 with valve normal and flanges 1x oil distributor WK9; 1x bar feeder 4 meters; 1x chip conveyor VR500; 1x hydraulic unit 1 Knoll oil filter Without collets and ejectors, without platform and without tool monitoring. supplied tooling may differ from the pictures. We can send you more pictures. The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB 32-45/16 CNC Yob: 2013 Electro-hydraulically controlled, fully automatic Extract from offer: Coolant system with chip conveyor and Knoll vacuum rotation filter High pressure pump 50 bar Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice) 1 bar loading magazine type IEMCA: bundle loader (yob. 2011) 1 Sawing unit: Saw blade D250mm 2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 Vertical support 26/80 with 36° angular position 2 drilling head 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. ...

Hydroelectric power station - Power: 1000 KvA composed of: 1 turbine Francis/ useful slope 31.7m, water volume 3'500 l/s, manufacturer; Hugal 1 piece generator power 1'000 KvA 1 piece ball slider

Hydroelectric power station - Power 790 kW composed of: 1 Turbine Pelton / Effective gradient 223m / Water volume 400 l/s / 1 piece generator 1 shut-off device 1 hydraulic power unit 1 piece transformer

Power Distributors VAT not deductible Please inquire with location and postcode

Therapy bathtub, with hydromassage unit/device, stainless steel tub with various water jets, pump, with cold and hot water connection, patient lift, external size 1860x2500x960mm, inner dimension 1800x2340x570mm. New condition.

We have for sale a number of used hydrocyclones from the German manufacturer AKW A+V. Condition: USED Type: RWS 105 Nominal Diameter mm: 50 mm Cut Size dT50,?m: 5-15 Pressure Loss,bar: 1,5 - 3.0 Capacity ,m3/h: 2,4 -7,6 - High pressure resistance, The best operating pressure is much higher than the like products, much easier to reach the better separating effect, good cost performance. - Each type of hydrocyclones has big amount of successful applications, it can ensure that every operating hydrocyclone has the balance feeds. - The involute design from Germany makes the AKW hydrocyclones having better effects of concentration and separation. - Extra long lifetime. - Standardized parts, it is very convenient to change the spare parts.

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500 x 600 inside basket diameter 1.500 mm inside basket height 600 mm

Annular distributors in fully automatic mode allow a homogeneous and equal pressure distribution on every hydrocyclone in operation. Annular distributor for 10 hydrocyclones.

Annular distributors in fully automatic mode allow a homogeneous and equal pressure distribution on every hydrocyclone in operation. Annular distributor for 5 hydrocyclones.

Cyclone / hydro-cyclone Type: 10 INCH C-650 / C650 New from surplus/stock For more information, see pictures!

1 rimless hydro extractor made KRANTZ, type GLEITSCHWINGER 1500x700 Inside drum diameter 1.500 mm, inside drum height 700 mm Machine is special reinforced execution with round base support and 4 Gleitschwinger feet

Rexroth pump combination Hydromatik, R900751978 FD 48922, SY2DFE1-20/071-071 + 00746404 SN 30113831 Stock / stock # 5003

Technical data: -For punching into SCHÃ?CO - profile systems - air consumption per stroke 18 l -Air inlet 8 bar -Space requirement approx. B H 700 x 1250 X 500 mm -Weight approx. 100 kg -with:-foot switch -Original - machine base

Hydrostat / Acid Gearbox SPV23 000 29852

Battenfeld Calzoni Hydromotor MRE5400/5401/33800 A1640538

Hydropower - Power: 240 kW consisting of: 1 piece turbine Pelton/ paygap 225m, water quantity 130 l/s, manufacturer; Escher-Wyss 1 piece generator power 240 kW, manufacturer; Barthold