hydraulic unit used for sale

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...

Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in the field of hematology to optimize reagent logistics in laboratories. The instrument is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a stand-alone device whose components are all housed in a closed housing. The housing features removable, epoxy-coated sheet metal covers. All external connections as well as the ON/OFF switch are located on the back of the device. All components that can be serviced and replaced by the user are accessible through the front door. The  ...

Mini roller cutter Our range now also includes machines for processing residual rolls, for example from paper production, the packaging industry, printing houses, textiles, aluminium rolls, film rolls, etc. These heavy rollers cannot be processed efficiently and safely with the normal cutting systems, but with these special "guillotine" roller cutters this is no longer a problem. The mini roller cutter can be seen here as a standard version. We offer the Mini roller cutter in version G20 / 25 and G30. All data can be customized according to the customer's wishes. (Sensors | Protective grille | Light barriers | colour, etc.) Roll width: max. 700 mm Roller height: max. 800 mm Drive: 5.5 Kw Cutting force: 25 T cylinders Weight: 1200 kg Working cycle: 65 seconds Including automatic return: Important roll cutting width and roll cutting height can be adjusted as desired. Dep ...

Stretch wrapping machine IMA model: MS300AM

Storage number: 3574 miscellaneous Manufacturer: GRUNDFOS , Type: CR2-60A-A-A-AUUE specifications: Rated Flow 2.5 m3/h Volt 380 Engine Power 0.75 Max pressure 16 bar/120 C Bar Pressure height 37.7 m Weight: 15 kg

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk

Storage number: 3572 Various Manufacturer: GRUNDFOS PUMP , Type: CRK 4-100/10 A-W-A-AUUV Specifications: Rated Flow 66.7 l/min Stages impellers 12 pc Volt 380 v Depth of the pump 385 mm Engine Power 2.2 Max Print 8 Bar Weight: 29.6 kg

Pester Pewo pack 450 compact

Second-hand machine type Pester Pewo pack 450 Pester PEWO-Pack 450, built in 2003 only 2700h operating hours For tightening insulating individual and collective containers with PE film in the pharmaceutical cosmetics and food industry The technically high-quality series equipment includes: - compact and stable design in modular design - Control console with 4-line plain text display for the following, piece counter, speed display, hour counter, temperature monitoring, general fault indicator - Wear-free, infinitely adjustable, patented tightening system - Product protection by means of safety monitoring by means of light barriers in the closing area - Film monitoring, advance warning with optical and acoustic display as well as machine stop at the end of the film or film tear - Single aeration - Machine mobile, i.e. it has steering and buck rollers for internal transport, ...

Weibert RLA 125 Clean air extraction system Rated volume flow: 1095 m3/h Minimum volume flow: 884 m3/h Max Vacuum: 2220 Pa Chip collection volume max.: 255 ltr. Engine power: 2.2kW Connection 50Hz: 400V Weight: 194 kg Dimensions in mm: 1100 x 830 x 1650 Suction nozzle diameter: 125 mm Height lower edge suction nozzle to the ground: 850 mm Max sound pressure level 73 db (A) G&STÜ-5131250

Filter bowl, pneumatic filter, filter regulator -Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-CRV -Connection: G1/2 -Pressure: max. 12 bar -Price: per piece -Number: 3 Stück -Dimension box: 280/120/H150 mm -Weight: 0.7 kg/Stück

For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station with level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Used HB-Therm tool temperatureizers, W-90, AW-90, CW-90, SW-90, SW-140 for sale. They have an output of 6-15 kW, for 90-140C of water.

Key data: 95 , 9

Used Tool-Temp tool temperaturelers, TT-156E, TT-157E, TT-162E. They are wet, 95°C, 9-12 kW.

composed of: Cellophanizer Shrink tunnel Conveyor belt and carton reseeers good condition

Fabr. Walter Tip height: 105 mm

RLA 210 Clean air dedusters Metal fan wheel Inspection opening for cleaning the bypass filter manual cleaning Extraction of wood chips Not suitable for grinding dust mobile very quiet High extraction performance with small footprint Suction nozzle 200mm Nominal volume flow 2262 m³/h Volume flow max. 3700 m³/h Negative pressure at Vnenn: 2482 Pa Filter area 22m² Dust class M Residual suction content H3 Chip drum volume: 2x165l LxWXH 1755 x 830 x 1800mm Motor 3kW 400V 50Hz Weight 259kg G&STÜ-5132100

Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug

Angular milling unit suitable for IMA - incompatible with a Weeke plug

Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug

High-frequency ignition device, heating, gas and oil burners, automatic burner control, gas relay, control box -Manufacturer: Satronic, gas burner control unused OVP -Type: DMG 973 Mod.01 -Number: 2x control units available -Price: per piece -Dimension box: 100/80/H65 mm -Weight: 0.2 kg/piece

ID-Nr. 1-056-11-0400

spindle diameter: 90 mm x-travel: 1000 mm y-travel: 1200 mm z-travel: 1200 mm feed movement: 710 mm spindle taper ISO: 40 turning speed range: 8 - 1600 U/min table-size: 1120 x 1000 mm table rotating: 360 ° table load: 2,5 t total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 3,3 x 3 m separate switchboard, rapid feed, some tool holders, without face plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1500 mm control: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mm Table dimensions: 1200 x 1500 mm table load: 5 t spindle turning speed range: 12 - 2300 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2005 mm y-travel: 1860 mm z-axis: 1620 mm w-axis: 706 mm control: Siemens 840 C SW5.1 turning speeds: 2500 U/min surface area: 2500 x 2000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK50 tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 580 mm main drive motor: 45 kW table surface area: 1600x2000 mm table load: 12,5 t Control: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kg total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

?dapter unit flat scraper

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 2000 mm w-axis: 700 mm table load: 10.000 kg Table dimensions: 1600x1800 mm Control: Fanuc 31iMB voltage: 400 V number of spindle speeds: 35-3000 U/min taper ISO: 50 Tool changer: 60 total power requirement: 20/30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc 32iMB spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm Manual Guide i The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 10000 mm y-travel: 3500 mm z-travel: 1000 mm Control: Heidenhain type: TNC 155 workpiece weight: 300 t turning speeds: 1620 U/min spindle taper ISO: 50 One direction thrust bearing: 2 Angle head: 2 power capacity: 76 kW Plate area: 12000x9000 mm rotary table:: Colgar type: TRT1500 mm table surface area: 2000x2500 mm Table load: 20000 kg Travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Plate area: 109 m² Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1500 mm z-travel: 1450 mm table surface area: 1400 x 1600 mm taper ISO: 50 spindle speed:: 2 - 2500 Control: TOSNUC 7-3 total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 6400 mm y-travel: 3900 mm z-travel: 1450 mm turning speeds: 500 U/min power capacity: 52 kW chip conveyor: digital readout: Plate area: 12500x5500 mm Plate area: 7000x3500 mm Plate area: 93 m² total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m florplates are optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Temperature control units GWK central cooling system, project number 21 8729 Designed for: Cooling capacity 300 kW; at max. ambient temperature 32°C and cooling water flow temperature 20°C Composed of: Temperature control unit burner cooling Teco WCC100 / power 13.3 kW, nominal voltage 20.5A Temperature control unit heating roller 1 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 2 Tecma Wi 7.700.150D.150, power 7.5 kW, nominal voltage 15A Temperature control unit heating roller 3 Tecma Wi 7.700.150D.150.D25, power 7.5 kW, nominal voltage 15A Temperature control unit cooling roller 4 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A Temperature control unit cooling roller 5 Teco wd 500.00.32; Power 5.5 kW, rated voltage 11.5A

PROFROID QC MT 100 PK Brand:PROFROID Type:QC MT 100 PK Stock number:M21-1293 Cooling capacity:6.82 kW Application:Cooling Number of fans:2 Refrigerant:R744 (CO2) Voltage:400 Volts Motor power:2x 0,25 kW Dimensions:1200 x 390 x 1430 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please visit also our website: used-refrigeration

PROFROID QC MT 30 PK Brand:PROFROID Type:QC MT 30 PK Stock number:M21-1292 Cooling capacity:2.25 kW Application:Cooling Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 360 x 1028 mm Weight:125 kg Year:2019 New/unused Number in stock:1 piece(s) Price:Quotation request Description: New unused Profroid condensing unit with 1 scroll compressor. Mentioned capacity at an evaporating temperature of -8°C and an ambient temperature of +32°C. Please also visit our website: used-refrigeration

PROFROID QC LT 75 PK Brand:PROFROID Type:QC LT 75 PK Stock number:M21-1291 Cooling capacity:2.04 kW Application:Freezing Number of fans:1 Refrigerant:R744 (CO2) Voltage:230 Volts Motor power:0,25 kW Dimensions:1200 x 690 x 1028 mm Weight:185 kg Year:2018 New/unused Number in stock:1 piece(s) Price: Quotation request Description: New unused Profroid condensing unit with 2 scroll compressors. Mentioned capacity at an evaporating temperature of -32°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Lateral Perforating Unit GTO 46 (EXTRA TOOLS) • incl. numbering shaft • 2 extra perforating knives (unused)

Gluing unit, gluing part, gluing head, heating basin for edge banding, edge banding machine -Manufacturer: Brandt, aggregate from edge banding machine BRANDT KS 25 -Engine. Groschopp 0.25 kW / 2800 rpm -Gearbox: i 12/233 rpm -Dimension total. 560/340/265 mm -Weight: 28 kg

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -Manufacturer: Brandt, components from the BRANDT KM 36 edgebanding machine -Individual components: see photos -Price/Sale: complete -Overall dimensions: 1200/800/H530 mm -Total weight: 122 kg

INTENSIVE Nozzle Filter JC 20/1-2 BS 22.6 Filter Area Attachment filter without funnel 20 baskets ø 160 x 2250, control unit S 6022-220 V Diaphragm and solenoid valves new, filter bags new Housing approx. 1.35 m x 1.35 m x 3 m Space requirement horizontally to change hose approx. 1.8 m

M. No: 32781 Size: 300 x 560 mm Speed: 44.000 c/h