135,199 used machines on RESALE, but how to find them? Machine Search
automatic baler Manufacturer: UNOTECH Type: UPAMAT 130 H5 Year of construction 2025 Operating hours: approx. 1,300 h Technical data: Press force: 1,200 kN / 315 bar Specific pressing pressure: 10.00 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 1,100 x 1,100 mm (H x W) Bale weight: 800 - 1,100 kg (depending on material and bale length) Binding: 5 times horizontally seen in the direction of pressing on the right side Drive power: 1 x 75 kW Oil tank volume: 2,400 litres incl. oil drip pan and leak oil warning device Volume output: - at idle approx. 920 m³/h - Under operating conditions: approx. 410 m³/h Weight output depending on the bulk material: - For 20 to 30 kg/m³ bulk density: approx. 12 t/h - For 30 to 50 kg/m³ bulk density: approx. 20 t/h - At 60 kg/m³ bulk density approx. 24 t/h - At ...
Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14"–26" Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24" printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening The Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and p ...
Press brake manufactured in 2007. This Gade PS-C 3120 features a pressing force of 120 tons and a bending length of 3,000 mm. If you are looking to get high-quality bending capabilities, consider the Gade PS-C 3120 machine we have for sale. Contact us for further details.
AZIMUTH H612 clinching press was built in 2021 in Canada by Azimuth Press. The machine is used for the mechanical joining of components made of thin sheet metal, providing an alternative to spot welding. Clinching enables the creation of a durable joint without the need for screws or rivets, while preserving the material’s anti-corrosion coating. As a result, the H612 clinching machine is suitable for the production of ventilation ducts and other components of ventilation systems. The AZIMUTH H612 is designed for machining mild steel with a thickness between 0,3 mm and 1,2 mm. The process begins by placing the sheet metal between the punch and the die. The punch applies pressure to the material, causing localised deformation. Under the pressure, the sheet metal is displaced and formed within the die, creating a characteristic mechanical interlock between the two layers. Once the pun ...
Pressure Switch ORSTA D5 CO 3 ( D5CO3 ) TGL 10952 New ! Dimensions: 180 x 65 x 75 mm
For sale is a fully operational, industrial-grade Lindemann SAS 1000 three-dimensional baler, offering reliable performance for scrap metal processing applications. Key Technical Specifications: Type: Lindemann SAS 1000 (Three-dimensional baler) Year of Manufacture: 1993 Drive System: 2 x 90 kW electric motors Cycle Time: 30 seconds Bale Size: 30 x 30 cm Control System: Modern touchscreen display Condition and Logistics Options: The machine is in fully working condition and was carefully dismantled solely due to relocation. We offer flexible delivery and handover options tailored to your needs: Standard Option: Provided in its current condition, loaded onto the buyer’s truck. Turnkey Option: Upon request, we can handle transport, professional assembly, and commissioning at the buyer’s site.
Pressure relief valve, hydraulic valve ORSTA CDS 16 - 2 - 02 TGL 10947 used, tested ! Dimensions: 170 x 80 x 45 mm
Technical data press: Manufacturer Paal (Kadant Paal) Type Konti 600 Year of construction 2008 Total operating hours: 23,020 hours Effective operating hours 1st pump: 10,719 hours, as of August 2026 Effective operating hours 2nd pump: 10718 hours, as of August 2026 Effective operating hours 3rd pump: 9,766 hours, as of August 2026 Number of bales pressed 183,075 bales, as of August 2026 Press force main press 158 t Specific pressing force 12.83 N/cm² Filling volume 3.45 m³ Theor. Throughput capacity approx. 1,266 m³/h Throughput under operating conditions approx. 805 m³/h Bale dimensions 1,100 x 1,100 mm, length variable Drive power 2 x 75 kW Total connected load, 135 kW Bonding 5-fold vertical, fully automatic throughput capacities with a Bulk density of 35 kg/cbm approx. 28.2 t//h Bulk density of 60 kg/cbm approx. 45.6 t/h Bulk density of 100 kg/cbm approx. ...
Pressure relief valve, hydraulic valve ORSTA CDS 16-3-02 TGL 10947 Nominal pressure: 16 MN/m² used, tested ! Dimensions: 140 x 45 x 45 mm
Technical data press: Manufacturer: Presto GmbH & Co. KG Type CC 36 M Year of construction 2010 Operating hours 3,641 hours Press force main press 36 t Specific pressing force 467 N/cm² Dimensions of the insertion tray 1,080 x 1100 mm (L x W) Cycle time 34 seconds Filling volume / pressing cycle 0.85 m³ Theor. Throughput capacity 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale dimensions 1100 x 750 mm (W x H), length variable Drive power 15 kW Tying 4-fold vertical, semi-automatic, with polyester plastic yarn throughput capacities with a Bulk density of 35 kg/cbm 1.8 t/hour Bulk density of 60 kg/cbm 2.5 t/hour Bulk density of 100 kg/cbm 3.1 t/hour Transport dimensions excluding press 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight press approx. 4 t Remarks: The press was checked for funct ...
Technical data press: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2010 Operating hours 3,817 hours, as of August 2026 Number of bales pressed 36,001 bales, as of August 2026 Press force main press 1000 kN Specific pressing force 120 N/cm² Press force cutting edges free kick 121 kN Dimensions of the insertion tray 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 110 kW Current consumption, total 213 A Fuse 250 A slow blow Tying 5-fold horizontally, fully automatic throughput capacities with a Bulk density of 20 kg/cbm 12.86 t/hour Bulk density of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depending on t ...
Press station Stahl PS 46 Presstation / Press station Stahl PS 46 Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm
Letter Press Tiegel - DIE Cutter Heidelberg OHT Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1983 - Serial-No. 194543 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame
Antike Stockpresse / Antique Spindle Press Chn. Mansfeld Serial-No. 14101 Pressfläche / Press Area max. 550 x 480mm Presshöhe / Press high max. 660mm Wunderschön verarbeitete antike Stockpresse Beautifully crafted antique Spindle Press
pneumatic Block Gluing Press Wilhelm Leos BLPs pneumatische Blockleimpresse / pneumatic Block Gluing Press Wilhelm Leos BLPs Serial-No. 8487 Pressfläche Breite / Pressarea width max. 420m Einlegetiefe / Insertion Depth max. 500mm Fahrbar auf Rollen / mobile on wheels
Schuppenauslage mit integrierter Presse / Stream delivery with integrated pressing MBO ASP 66 - 2 ME Baujahr / Year 1999 Arbeitsbreite / Working width max. 660mm Geschwindigkeit / Speed min. 30m/min. - max. 160m/min. Stream delivery with integrated pressing rollers
Vertical Press Delivery Heidelberg VSA-66/M.D Vertikale Pressauslage / Vertical Press Delivery Heidelberg VSA-66/M.D Year 2000 - Serial-No. 702101/00-292080 Arbeitsbreite max. 660mm / Working width max. 660mm Markiereinrichtung / Marking Device
Pressure relief valve, hydraulic valve ORSTA CNS 16-2-02 TGL 10947 Nominal pressure: 16 MPa used, tested ! Dimensions: 160 x 80 x 45 mm
Schließrahmen - Frame KSB Letter Press Heidelberg KSB A4 -1 Frame KSB Cylinder
Schließrahmen - Frame SBB Letter Press Heidelberg SBB - 560 x 820mm
Spindelpresse / Spindle Press Tränklein SP Spindle Press Tränklein SP
Schließrahmen - Frame SBG Letter Press Heidelberg SBG A4 -4 Frame SBG Cylinder
Schließrahmen - Frame KS Letter Press Heidelberg KS -8 Frame KS Cylinder
Fully automatic baler Manufacturer: PAAL Type KONTI 325 G/S/k Operating hours: approx. 39,000 h Year of Make: 2012 Technical manufacturer data: Pressing force: 990 kN at 300 bar Specific pressing pressure: 120 N/cm² Drive power: 2 x 55 kW Pump capacity: 2 x 370 l/min. Total connected load: 150 kW / 260 A Volume output at idle: 800 m³/h Volume capacity at 35 kg/m³: 390 m³/h Performance at: 35 kg/m³ bulk density: approx. 13.50 t/h 60 kg/m³ bulk density: approx. 21.5 t/h 100 kg/m³ bulk density: approx. 33 t/h Filling opening: 1,020 x 1,750 mm Bale size: 750 x 1,100 mm Binding: 5-fold vertical + 3-fold horizontal Machine weight: approx. 28 t Bale weights: 525 to 800 kg including: - Free kicks - Wirbulator 15 kW - Automatic 3-fold horizontal tying with 40 kg wire unwinding device - W ...
Pressure Switches ORSTA D5 CO L32 ( D5COL32 ) TGL 10952 Dimensions: 150 x 65 x 65 mm New !
used
5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve, pressure reducing valve -Manufacturer: Parker, pressure reducing valve -Type: PRDM2BB16SVG15 -Pmax: 350 bar -Number: 5x valve available -Price: per piece -Dimensions: 185/40/H50 mm -Weight: 1.5 kg
SANGIACOMO T200 RCE 200T eccentric press was built in 2017 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking, stamping and deep drawing. Its wide range of machining capabilities, combined with a press force of 200 tonnes, makes it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 RCE features an intermediate wheel-pinion gear system. It provides high press force at a reduced nominal speed. As a result, the drive power can be used effectively when operating under high loads. The gears operate in an oil bath, ensuring proper lubrication of the drive components while reducing their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The press also has an overload protection system that protec ...
SANGIACOMO T200 DM-DB 200T eccentric press was built in 2018 in Italy by OFFICINE S. GIACOMO srl. The machine is designed for cold metal forming. It enables operations such as precision blanking and stamping. Its wide range of machining capabilities, combined with a press force of 200 tonnes, make it an excellent choice for the series production of components used in various industries. The SANGIACOMO T200 DM-DB features a drive system based on a flywheel and an eccentric gear, cooperating with two connecting rods. This solution ensures uniform torque transmission, which translates into a smooth working cycle. All drive components are continuously lubricated by a central lubrication system to minimise their wear. The machine’s frame is made of high-quality steel, while the shaft is made of forged alloy steel. The open side wall enables the feeding of material strip. The press has ...
This 6-axis ERMAKSAN Speed-Bend Pro 1270x60 was manufactured in 2021. It features a bending force of 60 t and a bending length of 1270 mm. The CNC-controlled backgauge includes X-axis travel of 500 mm and R-axis travel of 250 mm, ensuring precise operations. If you are looking to get high-quality bending capabilities, consider the ERMAKSAN Speed-Bend Pro 1270x60 press brake we have for sale. Contact us for further details.
Power connection: 20A, frequency: 60Hz, mains voltage: 120VAC, phase: single-phase. An on-site inspection is possible.
Pressure reducing valve, hydraulic valve ORSTA 06-20.01/0 TGL 26234/20 Dimensions: 100 x 35 x 35 mm
High-pressure filter, with electrical maintenance indicator MAHLE PUROLATOR Pi 420 ( PUROLATOR Pi420 ) Pi 4211-13 ( Pi4211-13 ) 77666514 400 bar 110 l/min with used filter cartridge ! Dimensions: 410 x 170 x 100 mm
Pressure reducing valve, hydraulic valve ORSTA AS 16-2-01 TGL 10950 Nominal pressure: 16 MPa Dimensions: 220 x 130 x 70 mm
Control: Cybelec DNC 600S. Inspection by appointment possible.
Pressure Reducing Valve, Direct-Operated, Hydraulic Valve REXROTH DR6DP 3-32/75Y ( DR6DP3-32/75Y ) R900541268 Maximum Secondary Pressure: 75 bar Maximum Operating Pressure: 315 bar New ! Dimensions: 170 x 44 x 42 mm
TECHNICAL CHARACTERISTICS: MODEL SH-250 Power tn 250 Motor power kw 5.5 Piston stroke mm 450 Maximum pressure bar 350 Neckline mm 375 Working speed mm/s 2.2 Approach speed mm/s 9.8 Return speed mm/s 17.5 Guide diameter mm 40 Support table mm 2.200 x 600 Table spacing mm 900 Support blocks mm 120 x 120 x 600 Working height mm 850 Total length mm 2.820 Total width mm 2,000 Total height mm 1.615 Weight kg 8,500 STANDARD DESCRIPTION: Our SH Series Horizontal Ram Hydraulic Press is designed with a range of three different powers ranging from 100 to 250 tons. Horizontal hydraulic presses are specially designed for straightening and bending profiles, bars and beams. The horizontal design of the machine allows us to easily handle large beams and profiles. The horizontal hydraulic press of the latest generation HS series has evolved into a versatility of use ...
TECHNICAL CHARACTERISTICS: Model 60 NC 100 NC 150 NC Power TN 6 10 15 Motor power kw 3 3 4 Adjustable stroke mm 0 – 80 0 – 80 0 – 80 Neckline mm 550 650 450 Working Height mm 1,090 1,180 1,033 Front total mm 610 610 540 Total side mm 780 780 960 Total height mm 1,800 1,900 1,700 Weight kg 550 700 825 STANDARD DESCRIPTION: HIDROGARNE hydraulic inserters are designed for insertion and clinching work, offering robustness, precision and reliability. They are compact and low-occupy, fully hydraulic equipment that guarantees precise insertion at any point of the punch stroke. They allow clinching work to be carried out in thicknesses from 1 to 6 mm and the insertion of any type of insert in materials such as copper, aluminium, carbon steel and stainless steel. They are available in insertion powers of 6, 10 and 15 tonnes. Digital hydraulic inserters are aimed ...
Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate length min 1000mm Plate thickness min 3mm Power supply 2,2kW Drive power height adjustment 0,55 kW With single tempering device STW 180/1-18-30-N1.1
This 3-axis Durma AD-S 40220 press brake was manufactured in 2023. It features a pressing force of 220 metric tons and a bending length of 4050 mm. The machine is equipped with a servo-motor-driven backgauge system and a CNC control unit with a 15 touchscreen. If you are looking to get high-quality bending capabilities, consider the Durma AD-S 40220 press brake we have for sale. Contact us for further details.
Press brake manufactured in 2004. This Salvagnini Performer / P2 features a tool set in good condition considering its age, with one defective threading segment that does not impede production. The upper edge cutter has been replaced. If you are looking to get high-quality bending capabilities, consider the Salvagnini Performer / P2 machine we have for sale. Contact us for further details.
Pressure relief valve, direct controlled, hydraulic valve REXROTH DBDS 6 P 12/200 Setting pressure up to 200 bar Dimensions 145 x 60 x 40 mm
Hydro-electric piston pressure switch REXROTH HE D1 KA 40/100 ( HED1KA40/100 ) max 460 V 15 A Dimensions: 200 x 95 x 45 mm
Pressure Relief Valve, Hydraulic Valve ORSTA CNS 10-2-02 TGL 10947 Nominal pressure: 16 MPa New ! Dimensions: 105 x 35 x 35 mm
Fernvorgest. Pressure reducing valve, hydraulic valve BOSCH 0811 145 004 Pv: 7 - 315 bar Pmax: 315 bar New ! Dimensions: 145 x 90 x 85 mm
Designed to ISO2858 the ECC (close coupled) Plastic Mechanical Seal Pumps are heavy duty pumps.
maximum number of results exceeded
please refine your search
