hydraulic motor used for sale

3 Phase brushless servomotor Never used! For all technical data please see pictures

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

Geared motor 2.2 kW gear motor 2.2 kW

Electric motor manufacturer Schorch GmbH, Moenchen Gladbach , unused! Three-phase motor with Kaefiglaeufer type KA7 160KW at 500 volts Design: IM B3 with relubrication device; Brass massive 160kw at 500Volt 50 HZ 1485 rpm 120KW at 400Volt 50 HZ 1485 rpm Weight 1.25t Built in 1992 It is a reserve engine that has never been in use. Mass approx.: Total length 1,260mm Zwpaya2p Total width 670mm Total height incl. foot 860mm Length stand 690mm Wide stand 610mm Shaft diameter 90mm Length of the shaft 170mm Wedge width approx. 25mm Connection box at the top Weight 1250kg Other motors available in 500V output. These can also be used in the 400 volt grid or with a transformer / transformer. Trafos can also be found here. 1. Electric motor manufacturer ABB 500 V 50Hz 75kw 112A Cosfi 0.82 992rpm 830kg 2. Electric motor Siemens 500 V 50Hz 132kw 178A Cosfi 0.90 2.982rpm 77 ...

Flat gear brake motor Gear motor Manufacturer: DEMAG Type: KBA112 B12/4 / KBA112B12 / 4 Detailed information on the manufacturers page, see pictures. Condition: New, can have traces of camp, comes from stock. Scope of delivery: see the pictures.

E engine durchfl. Water cooled Three-phase asynchronous motor Manufacturer: ELIN Model: MKH-435 K04 Z9Z Performance: 315kw Supply: 400 V Revolutions: 1336/min Weight: 1700kg NEW, original box, unused from old stock for further details please refer to the pictures.

see photos, 2 stubs

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.

Wire belt with variable speed gear motor - Length: 3200 mm - Width: 600 mm - Splitting 12,7 mm

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 3 amp and 10 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

Universal electronic controller, universal amplitude control, universal thyristor control for electromagnetic vibrators. 10 amp-25 amp Automatic scope 220-380 volts. Potentiometer / or 0-10 Volt adjustable amplitude range continuous setting range from 0 to Max. gently start PLC or PC control possible.

90 KW / 50 Hz.

Perske 10DW 12/10 DA 12/2 Frequency converter Drive motor: Type: DA 12/2 8KW 400V 50 HZ S1 IP 54 Circuit: Triangle 2910 RPM Coil: 7.5 A 380 V excitation voltage excitation 50 HZ excitation frequency donation page: Type: 10DW 12/10 10 kVA power 35 A of output current 300 Hz output frequency output voltage of 165 V speed: 12000 U/1 18,000 U/1 G & 2768-M3520

M. No: 01/6675917

OSTAS SWAGING MACHINE TYPE KMRP 2.5 -Capaciteit 2.5 mm -Roll met 4 sets -Voetbediening -Remmotor -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

2 pcs motors.: DIN EN 60034-1 Type: K21R 200 L6-4 L TWS 9 / 26.9 kW 400 V 19.5 / 49 amps 985/1470 U / min 200 Kg Year: 04 Wave Pully recording: 55 mm Pully diameter: 255 mm 1 pcs motor: DIN EN 60034-1 Type: K21R 225 S6-4 L TWS HW 12/34 kW 400 V 26/66 amp 982/1475 U / min 270 Kg Year: 04 Wave Pully recording: 60 mm Pully diameter: 255 mm

Qty. 4 Second-hand DC motors Mfc.: ABB Type: DMI400R-DC motor Built: 2009 Power: 1250 kW-815 V-1591 Amps.- 1500 RPM

OSTAS SWAGING MACHINE TYPE KMRH 4.0 -Capaciteit 4 mm -Rol hydraulic verstelling -Voetbediening -Remmotor -Roll met 4 sets -Noodstop -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Technical data: Drive motors/ motors Number: 6 pieces available Manufacturer: Spörk Condition: good (used) Power: see type plate/ motor data <b>Tailor-made solutions for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, slanted rollers or telescopic phones for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, the craft sector and the electronics industry. Together, we will work out ways to optimize your flow and material flow cost-effectively and susta ...

DATA ON THE MACHINE Machine type: Permanent magnet - DC servo motor Manufacturer: INDRAMAT Model: MDC 10.40C / MMA-0 / S06 Condition: ready for use (used) Price 550 â?¬ FP net plus 19% VAT Location Warstein , Germany Reference M-MAH-1119-9 Description We offer you a used DC servo motor from the manufacturer Indramat suitable for e.g. MAHO MH700 X or Y axis Worked flawlessly up to the removal Our offer is aimed at persons who are covered within the meaning of the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details in order to receive an offer with our Terms and Conditions of Payment. Mistakes in the descriptions and offers are reserved!

Electric motor with flange, IE2-WE1R 132SX2 TPM HW, 7,5 KW, 2925 rpm, VEM, new -65% Special price (The current new price in the market is € 1740 excl. VAT) If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. - 400 / 690 V - 2925 rpm - 7,5 KW - 74 kg - shaft diameter 38 mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Factory-powered LuefterMotor Umwaelzmotor for Unitherm am Lager! Immediately available! with performance; Immediately available

Electric motor with foot, IE2-WE1R 132S 2 TPM HW, 5.5 KW, 2915 rpm, VEM, new -70% Special (The current new price on the market is € 1990 excl. VAT) If you have a UID number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging. - 400 / 690 V - 2915 rpm - 5.5 KW - 57 kg - Shaft diameter 38 mm Functional guarantee! We cannot provide a conventional warranty and warranty for second-hand parts. However, we give you a functional guarantee. If the device does not work within 6 months of purchase, you can return the goods and we will refund the purchase price.

Krauss Maffei No. 6445689 45 kW

Various Ruettel motors vibration motors Weight from 10kg to 80kg/stueck Three-phase current 500Volt; Unused Special price

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: M7odp Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 Speedometer ATTENTION But the connector (Tacho - motor) is missing Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 2 pieces are available The motors are all in a comparable state - the attached images are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8160

Key data: 31 , 2800

DC motor with brake 31.5 kW Mannesmann DEMAG GCH 140 D2/1105 used, from spare parts warehouse 1x Mannesmann Demag GCH 140 D2/1105 DC motor with brake and speedometer specifications: Type: GCH 140 D2/1105 375 V 31.5 kW 2800 rpm Brake: 19 - 30 Nm - please ask before purchase with Huebner TDP 0.2 T-4 speedometer Wave length: 45 mm Shaft diameter: 32 mm Space requirement LxWxH: approx. 950 x 350 x 350 mm A total of 6 pieces are available The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8159

DC motor with brake 31.5 kW Mannesmann DEMAG GCM 200 D2/0905 used, from spare parts warehouse 1x Mannesmann Demag GCM 200 D2/0905 DC motor with brake specifications: Type: GCM 200 D2/09005 365 V 31.5 kW 95.00 A 1800 rpm 60% ED Brake: 300.0 Nm Wave length: 115 mm Shaft diameter: 55 mm Space requirement LxWxH: approx. 1350 x 500 x 500 mm A total of 9 pieces are available - but not everyone is equipped with a speedometer (5 pieces available) please ask before purchase! The motors are all in a comparable condition - the images used are nevertheless explicitly only an example. Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8158

Loading capacity: max. 300 Kg. Coil outsite diam.: max. 1.000 mm Coil inside diam. 240 - 560 mm Coil width: max. 180 mm; good

Loading capacity: max. 2.000 Kg. Coil Inside diam. max. 1.000 mm Coil Outside diam. max. 1.200 mm Coil width: max. 500 mm; ready for operation

22/33 kW, AC-Servomotor 2AD132D-B35OB2-AS03-A2N1 2piece Bosch Rexroth

Various electric and geared motors SIEMENS, SEW, BAUER, DEMAG etc. , see pictures, extra list on request.

Flange motor - 11 kW - 1440 rpm - 4 pieces More: Electric motor 37 kW Flange motor 55 kW, B250M/4L240 See pictures

1 pallet with various geared motors - see picture type BG10-11/D06LA4-TF BAUER Danfoss BG10-11/D06LA4-TF Gearboxnord SK33F-90L/4Bre16 (2 stu)

Output: 37 kW Speed: 1480 Axle diameter: 60 mm Shaft height: 230 mm 380 V

Technical data: -Material thickness 1.25 mm -maximum throat depth 180 mm -Roller Center distance 63 mm -maximum thickness at 40 kg / mm² strength 1.25 mm -Working speed approx. 6 + 12 m / min -Drive: 400 V / 0.7 / 0,85 kW - space requirement approx. B 550 x H 1250 X 1000 mm -Weight approx. 120 kg -with: - E - foot switch

RECON Bosch Starter for MWM 620 V12 Part number: 0116 2640 / 1204 1381 Bosch number: 0 001 510-003 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

RECON Bosch Starter for MWM TCD 2016 V12 Part number: 0117 8721 Bosch number: 0 001 417-058 ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

E-motor, 220 kW, 745 RPM

Attention Clearance Sale We need space, therefore we offer an price of 0,7 € / kg We have many used electric motors from different sice an manufaktors for sale. Condition of the electric motors is seen on the pictures. We sell this units only to dealers for export without warranty.

New lift elevator motor because a insolvency to a special price - Manufacturer: LOGOS Innovationen GmbH - Type LDS-320 - Asynchronous motor 15KW Manufacturer EMOD - Belt drive 4 belts - Speed 1m / s - Suspension 2: 1 - Payload 1250 Kg - 2 magnetic brakes from Mayr 2x550Nm braking force - including test protocol

OSTAS SWAGING MACHINE TYPE KMRP 1.8 -Capaciteit 1.8 mm -Verschillende sets roll met -Voetbediening -Remmotor -Noodstop -400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Manufacturer: Sick Stegmann Motor feedback Hiperface Sin / Cos periods 4096 Umd - New Type: SCM70-HYA0-K01, Attention! We have the best prices on the market and many other parts from Sick Stegmann. Buy more than 1 piece, there is still a great discount. New! The part was bought from a spare parts warehouse of a company and is completely new. We give you a functional guarantee for 6 months. Should the unit fail, we will replace it with a new one or refund the purchase price.

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1

N: 49351 Type: WAV 550 B building year: 1982 ratio: 5,158:1

Drum motors for conveyor belt drives according to the list in photo The motors are in good condition, ready for operation Flat rate for all engines EUR 3800.00 Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

One servo motor for each X/Z/A/ and C-Axis