1534 offers

maximum number of results exceeded > 1000
please refine your search

Category: 901: tractors
New in: 2008
Price: request quote
Location: Land-de DE 24941 Flensburg, Wieselhof 29
Seller: JODAU - Kommunaltechnik

ISEKI TXG 23 A, compact tractor with choiceable four-wheel drive, 17.5 kw / 23 HP 3 cyl.-diesel engine water cooled, displacement 1123 cm, hydrostatic drive 2 levels up to 15 km/h with Einpedalpedienung, differential lock, PTO front, center, rear, front power lift with mounting triangle front and rear three point linkage cat. I, hydraulic control unit (cross trigger) - 2 hydraulic connections front and 2 Hydra ulk connections rear, power steering. Registration documents included. Attachments are available. - JODAU local, environmental & green care technology - Pre-owned equipment & sports square care, garden & landscape construction, cemetery technology & winter maintenance, reversing op ...

Category: 103: milling machines
New in: 2002
Price: request quote
Location: ab Werksstandort,unter Strom
Seller: Kemmerich Werkzeugmaschinen GmbH

x-travel: 6500 mm y-travel: 1600 mm z-travel: 1200 mm table speed - backwards: 0 m/min spindle taper ISO: 50 turning speeds: 4000 U/min Feed: 5000 mm/min Rapid movement: 15000 mm/min control: Siemens Sinumerik 840 D Tool changer: 100 Cooling through the spindle: 20 bar coolant: table surface area: 8000 x 1100 mm spindle motor: 28 kW total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m equipped with: - CNC control Siemens 840 D - Orthogonal milling head DAndrea type H 41 - 100-fold tool changer (ISO 50) - Handwheel - IKZ with paper tape filter - NC turning clamp with through hole - Four-jaw chuck - Hydraulic tailstock - 2 self-centering steady rests  ...

Category: 107: sheet metal working
New in: 2006
Price: request quote
Location: Land-at AT 4664 Laakirchen, Gewerbegebiet Süd 6
Seller: ZIEGLER Maschinen & Werkzeuge

-the welded frame in Mono-block design ensures a good stiffness and high accuracy of the machine -Roller guide with 3-point support and an imported ad of with a Handwheel adjustable cutting Cone -the simplified setting of the cutting gap by moving blade carrier and Mono-block knife leads to an improvement of the quality -Since the machine with a synchronous control system with cylinders connected in series, you get a very uniform gravity. It's very simple. the cutting angle by controlling the flow to the cylinders connected in series on the different cutting thicknesses set -a Backgauge with drive and display facilitates the setting using a lamp to indicate the cutting line, the custome ...

Category: 101: boring mills and machining centers
New in: new
Price: 27.200 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 6 mm : 3.100 mm : 1,5 ° : 1.000 motorisch mm : 15 kW : 4.180 mm : 2.400 mm : 2.000 mm : 7.650 kg swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port motorized back gauge 1000 mm on ball screws, folding upwards clear control panel mounted on moveable arm  hydraulic hold down pistons are arranged close to the cutting edge  foot switch  central, manual blade gap adjustment  cutting line illumination  broad table with balls piece counter single and continous stoke fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale, T-slot and tilting cam  2 supporting arms 1.000 mm with T-slot simple replacement a ...

Category: 709: other food machines
New in: 1984
Price: 22.150 €
Location: Land-de DE 97753 Karlstadt-Karlburg (bei Würzburg), Industriegebiet Hessheimer Weg 3-7
Seller: Eurolux GmbH & Co.KG

Layers of filter plate filter SEITZ with hydraulic pressure motor Type. 60B 100 SEITZ OF ONLY NOLL Serial No.: 80035 Year of construction: 1984 The dimensions and weight: Height: 1220 mm Length: 4050 mm Width: 830 mm Weight: kg filter plates: 99 x filter plates & 2 x end plates made of stainless steel approx. 600 x 600 mm thickness: 10 mm

Category: 105: saws
New in: used
Price: used machinery auction RESALE 400 €
Location: Land-ch CH Switzerland, 8340 Hinwil
Seller: Surplex GmbH

Weight approx.: 600 kg Dimensions (l x w x h) approx.: 2400 x 2000 x 1400 mm Description: saw blade machining, saw blade dimensions 450 x 35 x 2,0 mm, feed hydraulic clamp, motor 380 V, 2.7/3.5 HP, saw height approx. 250 mm max., bracket opening max 490 mm, feed approx. 800 mm

Category: 102: lathes
New in: 1987
Price: request quote
Location: Land-de DE 58540 Meinerzhagen, Eseloher Weg 10
Seller: turn-tec Produktion & Service GmbH

Schütte multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 ...

Category: 502: presses
New in: 1990
Price: 69.500 €
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 100 Year of construction 1990 Hours of operation 24,319 hours Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 750 x 1,100 mm, length variable Driving motor 2 x 30 kW Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm up to 12 tons/h bulk weight of 50 kg/cbm up to 25 tons/h bulk weight of 100 kg/cbm up to 47 tons/h Bale weight 550 up to 850 kg, depends on material Volume hydraulic oil tank 1,200 l Transport dimensions only baler 11,750 x 2,250 x 3,150 mm (l x w x h) Machine weight baler approx.  ...

Category: 102: lathes
New in: 1987
Price: request quote
Location: Land-de DE 58540 Meinerzhagen, Eseloher Weg 10
Seller: turn-tec Produktion & Service GmbH

Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The  ...

Category: 502: presses
New in: 2016
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer HSM Typ VK 4812 P Year of construction 2016 Hours of operation 1,937 hours Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 24,5 sec. Theoretic throughput rate 151 m³/hour Bale size 1,100 x 750 x 600 up to 1,200mm Driving motor 15 kW Connected load 17 kW rated current 36 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 3 tons/hour bulk weight of 50 kg/cbm up to 7,5 tons/hour Bale weight up to 550 kg, depends on material SPS controller (manuf., type) Siemens Operating panel (manuf., type) Siemens HMI Touch Panel Filling quantity hydraulic ...

Category: 101: boring mills and machining centers
New in: 1998
Price: request quote
Location: Land-de DE 57334 Bad Laasphe, Siegener Str. 133
Seller: RM-Industrieservice Lager und Büro

Hydraulic plate shears Manufacturer: HM Sweden Type: 2000 Year of construction: 1998 Bekv2wmbof Table size 2200 x 300 mm Height 1000 mm Maximum sheet thickness 2,5 mm Continuous retainer Hydraulic motor 3,0 KW Speed hydraulic motor 2880 RPM. Backgauge 630 mm hand Control Panel with emergency stop

Category: 502: presses
New in: 1997
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Bollegraaf Typ HBC 80 AK Year of construction 1997 Stand 02/2019 operating hours counter 42,555 hours, the counter was probably replaced, the machine has run more hours, exact status not known. Press power main press 78 tons Press power of pre-press 45 tons Feed channel 1,500 x 1,100 mm Filling volume 2.9 m³ Theoretic cycle time 22 sec. Throughput rate under operating conditions 300 up to 450 m³/hour Bale size 1,100 x 720 mm, length variable Driving motor 45 kW Tying system 5-fold vertical, 3-fold horizontal, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 10 tons/hour bulk weight of 50 kg/cbm approx. 18 tons/hour bulk weight of 100 k ...

Category: 1518: other lifts or indoor vehicles
New in: used
Price: 300 €
Location: Land-lt LT LT-55 Jonava, Fabriko g. 3a
Seller: MEDIENOS STAKLES, UAB

Type 8X20-11/8 Dimensions of platform 1800?1200 mm Max. loading 2000 kg Lifting height 1100 mm Lifting time 38 s Motor power 1,43 kW Voltage 400 V (50 Hz) Made in Sweden Transport dimensions 1800x1200x300 mm Weight 390 kg

Category: 502: presses
New in: 2001
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Paal Typ Konti MK 325 D-SO Year of construction 2001 Hours of operation 28,898 hours, stand January 2019 Press power main press 94 tons Feed channel 2,000 x 1,020 mm Filling volume 2,15 m³ Theoretic throughput rate 825 m³/h Throughput rate under operating conditions 400 m³/h Bale size 1,100 x 750 mm, length variable Driving motor 2 x 45 kW Ruffler 15 kW Connected load 128 kW Rated current 240 A Tying system 4 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 14 tons/h bulk weight of 50 kg/cbm approx. 27 tons/h bulk weight of 100 kg/cbm approx. 38 tons/h Bale weight 525 up to 800 kg, depends on bale length and material Vol ...

Category: 901: tractors
New in: used
Price: request quote
Location: Land-at AT Texing
Seller: Karner & Dechow Industrie-Auktionen Ges.m.b.H.

last off Code: DL-367DR registration: 25.04.2014 elapsed. Hours of operation: 500,6 performance: 74, 9kW displacement: 4. 400ccm test badge: 4/2017 drive type: diesel maximum speed: Motornr.: Perkins 4-cylinder, turbo-diesel 4.4 l type, variant, version: T-L1/T1 003SP / - FIN: 10STG00495 equity / total weight: 3.843/6.000kg Facilities: 4 course, div. control panels, air conditioning, front and rear license Launcher, additional lighting, tray plateau, div. storage compartments, front hydraulic Lesnik PREDNJA HIDRAVLIKA SHL 24, year 2014, Powershiftgetriebe with load speed, power shuttle on the steering wheel is switchable, 32/32-speed transmission 3 DW rule hydraulic control units in the re ...

Category: 502: presses
New in: 2007
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Typ Konti 425 E Year of construction 2007 Hours of operation 33,959 hours Press power 100 tons (120 tons at 300 bar) Specific press capacity 121,1 tons/m² Feed channel 2,000 x 1,020 mm (l x w) Throughput rate under operating conditions 375 m³/hour Theoretic throughput rate 780 m³/hour Bale size 1,100 x 750 mm (w x h) Driving motor 2 x 45 kW Connected load 108 kW Rated current 210 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 35 kg/cbm approx. 13 tons/hour bulk weight of 60 kg/cbm approx. 22 tons/hour bulk weight of 100 kg/cbm approx. 35 tons/hour Bale weight 550 up to 750 kg, depends on material Volume hydraulic oil tank 3,100 l SPS  ...

Category: 708: refrigeration engineering
New in: used
Price: request quote
Location: Land-fi FI 00980 Helsinki, Itakatu 1-5, 3rd Floor
Seller: JADE Trading OY

Ammonia Liquid Chiller GEA Grasso VP 1300 CAPACITY CONTROL All screw compressors used in the package series are fitted with a continuous capacity control with a range of 10 - 100%. The capacity is adjusted by shortening the compressor stroke. The defining factor for the compression process is the effective rotor length; this is altered by a hydraulically operated control slide (mounted below the rotors). As a standard, each Grasso liquid chiller FX PP, LP, VP comprises a low-voltage switchgear installation (IP54) with integral freely programmable logic controller (PLC) GSC. The software functions and the assignment of inputs/outputs of the GSC control are described separately. ...

Category: 502: presses
New in: 2003
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 140 Year of construction 2003 Working hours 39,542 h Press power main press 140 tons Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h) length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2,300 l Baler dimensions built up with hopper approx. 13,200 x 2,750 x 5,020 mm (l x w x h) Transport dimens ...

Category: 105: saws
New in: 2008
Price: request quote
Location: Land-de DE 34134 Kassel, Silberbornstr. 2 c
Seller: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. Band saw machine make KNUTH ABS model 450 B. No.: 147051 year of production 2008 Cutting power: around 450 mm square 450 x 450 mm Stepless cutting speed 20-100 m / min How to contact with length stop 500 mm Band size 6000 x 41 x 1,3 mm Main engine power up to 3 kW Hydraulic 1,1 kW Feed motor 0,25 kW Coolant pump 0.12 kW External dimensions: Width 3400 mm Depth 1500 mm Height 1900 mm Weight approx. 1800 kg With: Highway 2500 mm Roll feed

Category: 502: presses
New in: 2010
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Bollegraaf Typ HBC 80 K Year of construction 2010 Hours of operation 33,931 hours Press power main press 86 tons by 275 bar Press power of pre-press max. 42 tons Feed channel 1,485 x 1,100 mm Filling volume 2.9 m³ Theoretic cycle time 22 sec. Theoretic throughput capacity up to 450 m³/hour Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical, 3-fold horizontal, fully automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 13 tons/hour bulk weight of 50 kg/cbm approx. 20 tons/hour bulk weight of 100 kg/cbm approx. 30 tons/hour Throughput rate with ruffler approx. 20 tons/hour Bale weight 550 ...

Category: 1110: drive motors
New in: used
Price: 550 €
Location: Land-de DE 72555 Metzingen Mühlstr 16
Seller: Herr thienlan

Unused aggregate Hawe HK 448 LD / 1M H 2.2kW 100 l 4 are available. 2 are damage caused by transportation. But works.

Category: 502: presses
New in: 1998
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer HSM Type VK 75 / 1600 Year of construction 1998 Hours of operation 54,412 hours Press power main press 75 tons Specific press capacity 99,2 N/cm² Feed channel 720 x 1,600 mm (w x l) Capacity per cycle time 1,21 m³ Theoretic cycle time 14,4 sec. Theoretic throughput rate 339 m³/h Bale size 720 x 1,050 x 600 up to 1,200 mm (w x h x l) Driving motor 55 kW, 500V, 50 Hz, 79 A Connected load 64 kW, 500 V, 98 A Tying system 5-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6,8 tons/h bulk weight of 50 kg/cbm up to 16,9 tons/h Bale weight up to 620 kg/bale, depends on material Volume hydraulic oil tank 1,250 l SPS controller (manuf., type) Siemens ...

Category: 106: presses
New in: 1981
Price: request quote
Location: Land-sk SK 91101 Trencin, Gen. M.R. Stefanika 69
Seller: BASTA machinery

Hydraulic press Fritz Muller ZE600 Germany Power in tons: 600 tn Ram stroke: 900 mm; Motor power: 90 kW; Table dimensions: 2000mm x 1600mm Length x width x height 2700 mm × 4800 mm × 8000 mm; Weight 88000 kg;

Category: 502: presses
New in: 2003
Price: 29.500 €
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer HSM Type VK 4012 Year of construction 2003 Hours of operation 18,158 hours Quantity of pressed bales 71,479 bales Press power main press 45 tons Specific press capacity 69,4 N/cm² Feed channel 820 x 1,250 mm (w x l) Capacity per cycle time 0,81 m³ Theoretic cycle time 17 sec. Theoretic throughput rate 174 m³/h Bale size 900 x 720 x 600 up to 1,200 mm (w x h x l) Driving motor 15 kW Connected load 18 kW, 500 V, 50 Hz, 30 A Tying system 3-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 3,5 tons/h bulk weight of 50 kg/cbm up to 8,7 tons/h Bale weight up to 400 kg/bale, depends on material Volume hydraulic oil tank 300 l SPS controller (manuf. ...

Category: 206: presses
New in: used
Price: 800 €
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0563 Brand: ORMAMACCHINE Model: P/2 Hydraulic cold press Platens dimensions mm 2500 x 1200 N° 2 hydraulic pistons Total thrust 10 ton Max opening mm 500 Motor Hp 1 Overall dimensions : mm 2600 x 1250 x 2100 h Weight kg 850

Category: 502: presses
New in: 2009
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Europress Typ 6500 V5 H3 Year of construction 2009 Hours of operation 15,334 hours, stand January Quantity of pressed bales 138,097 bales, stand January Press power main press 120 tons Specific press capacity 142 kg/cm² Feed channel 1,650 x 1,100 mm (l x w) Filling volume 3 m³ Capacity per cycle time 1,58 m³ Bale size 730 x 1,100 length variable Driving motor 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Connected load 83 kW current consumption 150 A Tying system 5-fold vertical, 3-fold horizontal, fully automatic (the uppermost horizontal needle channel is blocked) Bale weight 450 to 900 kg, depending on bale length and material Volume hydraulic ...

Category: 206: presses
New in: 1990
Price: request quote
Location: Land-de DE 40549 Düsseldorf, Monschauer Str. 2
Seller: Maschinen-Kaul GmbH & Co.KG

Technical data: Motor kW 6,6 Compressed air connection up to 10 bar Feature: hydraulic / pneumatic Function (automated): -Clock-controlled transport waiting station -opto Electr. Level detection in the course at simultaneous MaÃ? transfer and size adjustment of the crimping station -Eintrasport, PreÃ? cycle including "Open press" -Transport and removal device

Category: 502: presses
New in: 2003
Price: request quote
Location: Land-nl Netherlands, 9679 Scheemda
Seller: OBM Recycling Machinery B.V.

Manufacturer Avermann Typ Avos BP 1410 S 37-70 Year of construction 2003 Working hours 17,532 h Press power main press 70 tons Specific press capacity 90,9 N/cm² Feed channel 1.400 x 1.000 mm (l x w) Theoretic cycle time 10 sec. Throughput rate 360 cbm/h Bale size 1.100 x 700 mm (w x h) length adjustable Driving motor 37 kW Tying system 4-fold vertical, fully automated Throughput rate max. approx. 15 tons/h Bale weight until 550 kg Baler dimensions built up with hopper approx. 8,390 x 2,355 x 3,780 mm (l x w x h) Transport dimensions only baler approx. 8,390 x 2,355 x 2,800 mm (l x w x h) Machine weight baler approx. 15 tons Comments: The machine was overhauled end of 2018 and tested with ...

Category: 203: planing machines
New in: used
Price: request quote
Location: Land-de DE 40549 Düsseldorf, Monschauer Straße 2
Seller: Maschinen-Kaul GmbH & Co.KG

-Working width 520 mm -Chip depth adjustment through hydraulic. Foot pedal -Aufgabteitsch 1,640 mm -Decrease table 1200 mm -Sturdy dressing stop, adjustable up to 45 ° -Ã? 125 mm Tersa knife shaft for 4 blade -Motor output 5.5 kW -serrated table lips -COVER cutter block guard -Suction nozzle ø 160 mm (suction power needed 25 m³/min be 28 mm W.C.) -Dimension Lxwxh: 2.840x865/1.285x1.060 mm -Weight 950 kg

Category: 502: presses
New in: 2005
Price: 39.500 €
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Avermann Typ AVOS 1810S-90/100 Year of construction 2005 Hours of operation 23,072 h Quantity of pressed bales 16,163 piece Press power main press 100 tons Specific press capacity 121,2 N/cm² Feed channel 1,000 x 1,800 mm Capacity per cycle time 1,35 cm³ Theoretic cycle time 12,5 sec. Bale size 1,100 x 750 mm Driving motor 2 x 45 kW Connected load 130 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12,2 tons/h bulk weight of 50 kg/cbm approx. 16,0 tons/h bulk weight of 100 kg/cbm approx. 23,2 tons/h Bale weight 500 up to 800 kg, depends on material and bale length Volume hydraulic oil tank 2,000 l SPS controller (manuf., ty ...

Category: 201: saws
New in: 1985
Price: request quote
Location: Land-de DE 40549 Düsseldorf, Monschauer Straße 2
Seller: Maschinen-Kaul GmbH & Co.KG

-Be hem length 3,3 m -Motor output 5.5 kW -Parallelogram protection device -Cutting height of 145 mm Saw blades ø 450 mm to 350 mm under the table tweeter -Angle and height adjustment of the saw blade by foot pedal with hydraulic pump -Speed adjustable 2,800/4,000/5,500 rpm, manually via belt apportionment -Suction nozzle ø 140/80 mm -Suction capacity 15 m³/h at 30 mm WS

Category: 502: presses
New in: 1991
Price: request quote
Location: Land-ru RU Russland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 100 Year of construction 1991, 2017 overhauled Hours of operation 40,586 hours Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 750 x 1,100 mm, length variable Driving motor 2 x 30 kW Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 30 kg/cbm up to 12 tons/h bulk weight of 50 kg/cbm up to 25 tons/h bulk weight of 100 kg/cbm up to 47 tons/h Bale weight 550 up to 850 kg, depends on material Volume hydraulic oil tank 1,200 l SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., typ ...

Category: 102: lathes
New in: 2013
Price: request quote
Location: Land-de DE
Seller: RG-Tools GmbH

CNC turning and milling center manufacturers: Okuma type Genos L 300 MYW 500 Control: OSP P300 L year: 2013 Spindle running hours: [h] Turning technical data maximum turning length [mm] 500 Maximum swing over bed [mm] 520 Maximum turning diameter 300 [mm] Y 100 mm Maximum speed [RPM] 3000 Spindle bore 80 mm Elgang [m/min] X 20/Z25 Main spindle spindle motor [kW] 15 Tool locations [piece] 12 Tool system Okuma BMT speed driven WZ, 6000 rpm, power 5, 5 kw Hydraulic power Chuck diameter. 200 mm GegenspindelDrehzahl 6000 rpm,. Hydraulic power Chuck 170 mm additional features chip conveyor Touch-setter Tool holder short Rod feeder Iemca kid 80 length 250-1615 mm, plates f ...

Category: 502: presses
New in: 2006
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Lyndex Typ BIMAX 12/110 Year of construction 2006 Hours of operation 20,661 h, stand Jun Quantity of pressed bales 31,632 piece, stand Jun Press power main press 120 tons Specific press capacity 10 kg/cm² Press power free stamper 24 tons Feed channel 2,000/1,400 x 1,040 mm Bale size 1,100 x 1,100 mm, length variable Driving motor 3 x 45 kW Rated current 260 A Tying system 5 fold vertical, fully automatic Throughput rate at a bulk weight of 20 up tp 30 kg/cbm approx. 10 up to 12 tons/h bulk weight of 50 up to 60 kg/cbm approx. 18 up to 26 tons/h bulk weight of 70 up to 100 kg/cbm approx. 28 up to 40 tons/h Throughput rate with ruffler approx. 10 up to 12 tons/h Bale weight 650 u ...

Category: 105: saws
New in: new
Price: 1.850 €
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

The CY270N is the perfect universal band saw for every metal worker, artisan, or other professionals. -The machine is suitable for the cutting of steel, stainless steel and aluminium profiles. -Blade - page guide each 6-set of ball bearings Blade back Guide set of ball bearings -Manometer for belt tension -Ergonomic handle Electrical Kühlmittellpumpe -Hydrauliches lowering the saw frame (adjustable) -Automatic shut-off -2 reversible saw speeds -with sturdy pedestal DATA Connection voltage 400 V Motor power 1100 W Coolant pump 100 W Weight approx. 190 kg Machine dimensions Lxdxh 1430 x 720 x 1700 mm Cutting speeds 45 + 90 m / min Band saw blade dimensions 2480 x 27 x 0, ...

Category: 502: presses
New in: 2008
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer MACPRESSE Typ 111/1 Year of construction 2008 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Tying system 5 fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Baler dimensions built up with hopper 11,460 x 5,945 x 4,055 mm (L x w x h) Machine weight baler approx. 40 tons Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the ...

Category: 103: milling machines
New in: 1995
Price: request quote
Location: Land-de DE 74626 Bretzfeld, Im Eisenhütle 6
Seller: Schraag Werkzeugmaschinen GmbH

Built in 1995, railway control of HEIDENHAIN TNC 415 with color screen, electronic hand wheel, hydraulic tool clamping, swivelling mechanism for vertical head, steel band cover. Clamping surface angle table 900 460 mm maximum table load of 400 kg Toolholder SK 40 Table way longitudinal X 600 mm Table way vertical Z 420 mm Outrigger way across 400 mm Y Vertical Quill stroke 75 mm Vertical head swivel +/-90 ° Speed range continuously variable/3 speed steps 20-4000 RPM. Feed range X, Y, Z stepless 1.0 - 5000 mm/min. Rapid traverse X, Y 7 m / min. Rapid traverse Z 6 m / min. Drive spindle motor 6,0 kW Weight approx. 2.8 t Accessories: lubrication/coolant system.

Category: 502: presses
New in: 2014
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer HSM Typ VK 4812 P Year of construction 2014 Hours of operation 6,518 hours Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 24,5 sec. Theoretic throughput rate 151 m³/hour Bale size 1,100 x 750 x 600 up to 1,200mm Driving motor 15 kW Connected load 17 kW rated current 36 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 3 tons/hour bulk weight of 50 kg/cbm up to 7,5 tons/hour Bale weight up to 550 kg, depends on material SPS controller (manuf., type) Siemens Operating panel (manuf., type) Siemens HMI Touch Panel Filling quantity hydraulic ...

Category: 1009: excavators
New in: 2011
Price: 27.000 €
Location: Land-uk UK LE10 Wolvey, Cloudsley Bush Lane
Seller: Machinery World LTD

Used 2011 Caterpillar M318D mobile excavator with bucket, quick coupler, blade, check valves, central greasing and aux. hydraulics. Service records are available upon request. EQUIPMENT DETAILS: CONFIGURATION: WEIGHT: 19.4 Tons BUCKET - Bucket: No - Cylinder: ok QUICK COUPLER - Type: Mechanical - Brand / Model: Morin STICK - Stick length: 2.5 m - Steel condition: ok - Welded: ok - Fishplated: ok - Cylinder: ok - Pins & bushings: ok AUXILIARY HYDRAULIC - Number of auxiliary hydraulic lines: 2 BOOM - Boom type: Mono - Steel condition: ok - Welded: ok - Fishplated: ok - Cracked: ok - Cylinder: issue ? Boom is dropping very slowly - Pins & bushings: ok CHECK VALVES - Check valves boom: Yes - Che ...

Category: 502: presses
New in: 2001
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Paal Typ Konti 600 D Year of construction 2001 Hours of operation 26,784 hours, stand January 2019 Press power main press 145 tons Feed channel 2,000 x 1,020 mm Filling volume 3,45 m³ Theoretic throughput rate 1,070 m³/h Throughput rate under operating conditions 540 m³/h Bale size 1,100 x 1,080 mm, length variable Driving motor 3 x 45 kW Ruffler 15 kW Connected load 185 kW Rated current 340 A Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 35 kg/cbm approx. 17 tons/h bulk weight of 60 kg/cbm approx. 30 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight 800 up to 1,250 kg, depends on bale length and material Vo ...

Category: 1009: excavators
New in: 2010
Price: 30.000 €
Location: Land-uk UK LE10 Wolvey, Cloudsley Bush Lane
Seller: Machinery World LTD

2010 TEREX TC125 MAKE & MODEL TEREX TC125 Year 2010 Running hours 1932 Load capacity --- Type tracked excavator Condition USED EQUIPMENT DETAILS: CONFIGURATION: SERIAL NUMBER: TC01250490 WEIGHT: 12.8 Tons BUCKET - Bucket: No - Cylinder: ok QUICK COUPLER - Type: Hydraulic - Brand / Model: Lehnhoff SWE MS08 STICK - Stick length: 2 m - Steel condition: ok - Welded: ok - Fishplated: ok - Cylinder: ok - Pins & bushings: imperfection ? Medium play AUXILIARY HYDRAULIC - Number of auxiliary hydraulic lines: Unit equipped with two aux. hydraulic lines BOOM - Boom type: Swingaway boom - Steel condition: ok - Welded: ok - Fishplated: ok - Cracked: ok - Cylinder: imperfection ? Boom cylinder ...

Category: 502: presses
New in: 2019
Price: request quote
Location: Land-sl SL Slowenien
Seller: OBM Recycling Machinery B.V.

Manufacturer ANIS Trend d.o.o. Type ATS110-75D 60 tons Year of construction 2019 Hours of operation 52 hours Press power main press 59 tons Specific press capacity 71 N/cm² Bale density with material cardboard approx.450 kg/m³ Bale density with material PET- and HDPE bottles approx. 280 up to 320 kg/m³ Feed hopper 1,600 x 1,040 mm Capacity per cycle 2,13 m³ Theoretic cycle time 10,7 sec. Cycle time under operating conditions approx. 20 sec. Theoretic throughput rate 441 m³/hour Throughput rate under operating conditions approx. 235 m³/hour Bale size 1,100 x 770 x 1,200 up to 2,200 mm (w x h x l) Driving motor 45 kW Oil cooler 1,5 kW Oil heater 2,0 kW Main Electric power 400 V / 50 Hz  ...

Category: 206: presses
New in: 1973
Price: request quote
Location: Land-de DE 37242 Bad Sooden-Allendorf, Werrastr. 20
Seller: Wilhelm Bachmann GmbH & Co.KG

Press dimensions 2500 x 1500 mm 2 medium pressure bar hydraulic pressure motorized movable to the right

Category: 502: presses
New in: 2007
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Technical data baler Manufacturer Paal Typ Konti 275 E/K Year of construction 2007 Hours of operation approx. 8,000 hours Press power main press 80 tons at 300 bar Specific press capacity 9,7 kg/cm² Feed channel 1,600 x 1.020 mm (l x w) Throughput capacity under operating conditions 350 m³/hour Bale size 750 x 1,100 mm, length variable Driving motor 75 kW Connected load 99 kW Rated current 180 A Tying system 4-fold vertical, 3-fold horizontal, fully automatic Bale weight up to 750 kg, depends on material Volume hydraulic oil tank 2,100 l SPS controller (manuf., type) Siemens Simatic S7-300 Operating panel (manuf., type) Siemens Multi Panel Transport dimensions only baler 11,152 x 2,152 x 3 ...

Category: 105: saws
New in: new
Price: request quote
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

The CY270N is the perfect universal band saw for every metal worker, artisan, or any other company. -The machine is suitable for the cutting of steel, stainless steel and aluminium profiles. -Blade - page guide each 6-set of ball bearings Blade back Guide set of ball bearings -Manometer for belt tension -Ergonomic handle Electrical Kühlmittellpumpe -Hydrauliches lowering the saw frame (adjustable) -Automatic shut-off -2 reversible saw speeds -with sturdy pedestal DATA Connection voltage 400 V Motor power 1100 W Coolant pump 100 W Weight approx. 190 kg Machine dimensions Lxdxh 1430 x 720 x 1700 mm Cutting speeds 45 + 90 m / min Band saw blade dimensions 2480 x 27 x 0,9  ...

Category: 502: presses
New in: 1997
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Bollegraaf Type HBC 50 AF Year of construction 1997 / 2018 overhauled Hours of operation 31,914 hours Press power main press 55 tons Specific press capacity 6,25 kg/cm² Press power of pre-press 25 tons Feed channel 1,320 x 1,100 mm (l x w) Capacity per cycle time 2,45 cbm Theoretic cycle time 30 sec. Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 45 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx.12 t/h bulk weight of 100 kg/cbm approx. 20 t/h Bale weight 380 up to 750 kg Hydraulicoil 900 l Transport dimensions only baler approx. 9,468 x 2,125 x 2,695 mm (l x w x h) ...

Category: 201: saws
New in: 1982
Price: request quote
Location: Land-de DE 48455 Bad Bentheim, Luxemburger Str. 22
Seller: WMB Werkzeug & Maschinen Börse

Circular sawing machines Fabr. Martin Type T 70 BJ. 1982 with 2.5 m slide Motor 5,5 kW 2800,4000,5500 U/min Saw blade up to 450 mm Hydraulic Schwenkbahr F 45°

Category: 502: presses
New in: 2003
Price: request quote
Location: Land-de DE Deutschland
Seller: OBM Recycling Machinery B.V.

Manufacturer Paal Typ Konti 325 E Year of construction 2003 Press power main press 94 tons Feed channel 1,750 x 1,020 mm Filling volume 2,15 m³ Theoretic throughput rate 660 m³/h Throughput rate under operating conditions 340 m³/h Bale size 1,100 x 750 mm, length variable Driving motor 75 kW Connected load 96 kW Rated current 180 A Tying system 4 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 11,5 tons/h bulk weight of 50 kg/cbm approx. 20 tons/h bulk weight of 100 kg/cbm approx. 32 tons/h Bale weight 525 up to 800 kg, depends on bale length and material Volume hydraulic oil 2,100 l Machine dimensions with feed channel 12,352 x 2,340 x 5,145 mm l x w x ...

Category: 703: meat and fish processing machines
New in: used
Price: 6.500 €
Location: Land-de DE 04158 Leipzig, Bahnhofstr.56
Seller: An-und Verkauf von Fleischereimaschinen

Sold is a Doppelklip 18/15 machine DKF The machine is in good condition, can be visited like -Hydraulic Klipdrucküberwachung, lets you work with highest Klipdrücken-high production reliability -Lever in closed cams minimal noise level -Processing of clips with 18 and 15 Division -Klipcodierung -Connection to all filler types -with cord strap feeder Technical data: -Calibre 35-110 mm diameter -Cadence to 120 port per minute -Motor 2,2 kW -Air pressure 6 bar

Category: 502: presses
New in: 1998
Price: request quote
Location: Land-nl NL Niederlande
Seller: OBM Recycling Machinery B.V.

Manufacturer BOA Typ 182 LB 6P Super Year of construction 1998 Working hours 36,012 h stand April Press power main press 90 tons Press power of pre-press 1 + 2 41,7 / 47,2 tons Feed channel 1,620 x 1,080 mm (l x w) Capacity per cycle time 2,5 cbm Bale size 1,100 x 800 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 130 kW Tying system 4-fold vertical, fully automated Throughput rate at a bulk weight of 20 up to 40 kg/cbm approx. 8 up to 12 tons/h bulk weight of 60 up to 80 kg/cbm approx. 16 up to 22 tons/h bulk weight of 100 up to120 kg/cbm approx. 24 up to 28 tons/h Bale weight approx. 500 up to 600 kg Volume hydraulic tank approx. 1,400 l Baler dimensions built up with ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)