136,299 used machines on RESALE, but how to find them? Machine Search
length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Hyundai Demolition Hammer 1300W 20 Joule with 2 chisels Auction-ID: A1-40896-75
JCB 1700W Demolition Hammer | 21-DH1700 Auction-ID: A1-40896-1031
Hyundai Demolition Hammer 1300W 20 Joule with 2 chisels Auction-ID: A1-40896-344
Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg
Auction-ID: A1-49612-4
Auction-ID: A1-49612-8
Auction-ID: A1-49612-27
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t
Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t
Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t
Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg
Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, Rotary hammer type DH 25V with transport case -Nominal power input: 600 W -Drilling/Percussion drilling -Speed: 0 - 800 rpm -Drilling capacity: Steel 13 mm / Concrete 25 mm -Case dimensions: 445/340/H170 mm -Weight: 10.3 kg
CONTROLS PLC SIEMENS S7 300 FEEDSTOCK TUBE external diameter min.: 20 mm external diameter max.: 70 mm wall thickness min.: 1 mm wall thickness max.: 6.5 mm MACHINE CHARACTERISTICS SWAGING force: 630 kN stroke rate (max.): 630 /min ELECTRICAL SPECIFICATIONS total power consumption: 40 kW Tube pointing machine HAGINGER AHM 63 with slide feeder S - Material: Steel tubes with a strength of 800 N/sqmm - Max. forming force: 4 x 630 kN - Drive motor power: 30 kW
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg
Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg
Overall length 110 cm, diameter 13 cm, pointed chisel suitable for hammer HS1500 or HS1600, Year of construction: 1
loading area: mit Untergestell weight: 125 kg length: 900 mm height: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
length: 620 mm width: 130 mm height: 300 mm weight: 88 kg : Antik Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: Krups A100 : . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fine impact mill, hammer mill, pin mill, pulverizer, auxiliary mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator, plastic shredder, crusher, plastic rolling mill, plastic cutting mill -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg
maximum number of results exceeded
please refine your search
45 € 
