hydraulic hammer used for sale

Hydraulic hammer / hydraulic-Meisel attachment used. For bobcat, mini excavator and small wheel loader with holder on fork carrier. Manufacturer/Type: unknown Holder approx. H-400 mm, W-1114 mm Meisel-A approx. 70 mm Meisel length approx. 400 mm Pressure: 400/850 PSI Total approx. 1160 x 1000 x 800 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Internal gear pump Manufacturer of Bucher Hydraulics Type QT52-050/51-100 L 252-5 HPN 692337 PD 180/100 bar VG 050/100 cm³/rotation Nr 37381094 Used

Hemco hydraulic tracing lathe Hopper feed very good condition...$7,900 obo Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Hydraulic Connections Fittings in Original Packaging Best Quality Made in Germany, Italy Price: â?¬ 2,00 / kg

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Hydraulic Cylinder EATON, HYDRO-LINE HR5F-2X4-N 1-2-N-V-V-1-1 HAHA2X4-N-Br / 02KR J081 210037 rod diameter: Ø 25 mm stroke: 100 mm pmax: 100 bar New !' Dimensions: 310 x 105 x 65 mm

Manufacturer : Schnupp Type of machine : Hydraulic Press Capacity: 2,500 tons Technical details in picture Find more here - / Contact us at -

DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw

DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw, Special Features: Interesting prices for these IT shredders, starting from 135 k€ for a hydraulic machine

Bespoke built Hydraulic press for the manufacture of airplane seat back Force: 100 ton Table size 2000mm x 2000mm Platens drilled for oil heating Run out table Omron PLC Cylinder in need for repair, oil heater not included

Hi, I offer you Hydraulic power pack-three engines 90 KW each -oil tank 4500l, -Each engine drives two hydraulic pump gear -Pump Model 45V60A Power supply power to the extruder scrap shears in the set are three Dimensions chydrauliczne 160x190 coolers coolers 3 x -cooling connection 100 mm -power connection 80 mm Very Good Condition Net price: 59900 $-€14000 contact: + 48 600-517-834

1250 MT Presezzi Brass Rod Oil Hydraulic Extrusion Press Line w/ OCN Handling System (New 2009) MANUFACTURER – PRESEZZI YEAR – 2009 SERIAL NUMBER – 2671-2009 PRESS TONNAGE – 1250 MT WORKING PRESSURE – 260 BAR BILLET DIAMETER – 145MM BILLET LENGTH MAX – 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE – 260 BAR RAM DIAMETER – 760MM POWER – 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM THRUST FORCE DURING EXTRUSION – 107 TON THRUST FORCE DURING RETURN – 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE – 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) OPERATING PRESSURE – 260 BAR BORE – 160MM ROD DIAMETER – 100MM SEALING FORCE AT 300 BAR – 107 TON OPENING FORCE AT 280 BAR – 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE – 26 ...

diameter of piston: 0 0 stroke length max.: 0 0 2 boards with hydraulic and pneumatic spareparts from Rexroth, Parker, Vickers, Festo, Wabco and Orsta! Without board, only sparepars! partially unused! Detailed pictures can be supplied. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cardboard press, paper press Horizontal version bale size 60x70x70 cm with cutting device Make HSM 14 to Presskraft older model year unknown. Very comfortable due to Insertion shaft and cutting device. The finished bale can be placed directly on a Pallet can be pushed out. Has a large hydraulic agregat runs very fast and quiet. Sale without guarantee/liability or warranty for VB 3.600,--€ plus VAT VAT. Peter Knam Sweden 7 D-88085 Langenargen peterknam.de 07543/4242

Available in stock 1 x Used Rehobot Hydraulics 1000 bar Two stage Hand Pump Type PHS-374.36. The equipment is used but in good working conditions.

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Properties: Cjt9y9ndu0 Condition: fully functional, with traces of use Color: Orange Material: Steel Ideal for fast material transport Expertly dismantled and packed Specifications: Dimensions of the belt conveyor Total length extended: 9820 mm Total length retracted: 4350 mm Conveying length: 9400 mm Total width incl. control cabinet: 1600 mm Total width without control cabinet: 1200 mm Conveying width/ belt width: 785 mm Type of strap: smooth Height incl. motor: 260mm Net weight: 5000 kg Conveying height incl. feet: 820 mm Drive: Motor Motor included Control cabinet included Telescopic belt conveyors Due to the excellent workmanship of the roller conveyor curve, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading you ...

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

Workpiece length 2200 mm Workpiece height 1400 mm Vertical pistons Ø70mm Motor power 1.5 kW Made in Denmark Transport dimensions 2900x2500x900 mm Weight 500 kg Price 1250 Eur (EXW Jonava, Lithuania)

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Range of tools is included in the price

Foot valve, foot pedal, 5/2 way valve, solenoid valve, hydraulic valve, oil valve, pressure valve, valve block, control block -Manufacturer: David Brown Hydraulics -Type: C9193430351 -Type: SNF05 137 -Quantity: 1x valve available -Weight: 1.1kg

PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...

Refer to code 1172 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Swivel arm punch Sandt, in good condition, immediately available Robsvvhfuer Sb Nwkju If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

ID3129 MRS 6,8 cbm grapple 6.8 cbm MRS hydraulic grab 6.8 cbm MRS Hydraulic Grab

punching pressure: 28.0 t punching cross-cut in cmm: 31 in 7.0 mm ST throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32.0 ltr. work height max.: 1033 mm total power requirement: 3.0 kW weight of the machine ca.: 553 kg dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amp ...

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector The data for this ad was cre ...

pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working pressure: 300 bar total power requirement: / kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25437 Technical data: - Pressure capacity 500 KN - Stroke infinitely adjustable 10 - 32 mm - Stroke rate 22 - 27 1/min - Projection 510 mm - Installation height 350 mm - Drive 400 V / 4 kW - Holes e.g. up to 27 mm Ø in steel 14 mm - With special punching saddle, e.g. up to 39 mm Ø in steel 9.5 mm - e.g. up to 90 mm Ø in steel 4 mm - Space requirement approx. W 700 x H 1700 x D 1200 mm - Weight approx. 1150 kg - with: - Hydr. Low-Pressure Grain Locator - Long punch holder for punching in sectional steel - Roller conveyor with plier feed control PEHU 101 - Roller conveyor approx. 6000 mm - Footswitch - Emergency stop button

Piston diameter: 500 mm 500-ton hydraulic pressing force 600 stroke 250 bar pressure PLC controlled, dual-screen, with measuring scale

punching force max.: 50 t throat: 510 mm stroke: 32 mm stroke - stepless adjustable: 10 - 32 mm no. of strokes: 35 bei 10 mm Hub/min Working height: 1070 mm daylight: 350 mm table width: 255 mm dimensions: ca. 1080 x 650 x 1680 mm material layer: 630 X 535 weight: ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

Punching force: 300 kN For example, punches a 20 mm hole in 12 mm steel Stroke release via foot switch Support table Range of tools is included in the price

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Large WBL support table with stop cam Stroke release via foot switch Range of tools is included in the price

Lechner IV B Hydraulic Bookbinding Press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Lechner IV B Hydraulic Bookbinding Press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Lechner IV B Hydraulic Bookbinding Press Price: 4000 EUR Download PDF Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Irreplaceable in bookbinding for the production of books, pads, etc. Ask About The Product Name (required) Company name Email (required) Phone Message (required) Newsletter Do not miss the new products in our stock. S ...

Rolong Hydraulic Book Spine Calibration Press - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Rolong Hydraulic Book Spine Calibration Press Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Rolong Hydraulic Book Spine Calibration Press Price: 2000 EUR Download PDF Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland A ...

Horizon APC-T61 Hydraulic guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Horizon APC-T61 Hydraulic guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Horizon APC-T61 Hydraulic guillotine Price: 4000 EUR Download PDF Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory elec ...

Ideal 7260 Hydraulic Paper Guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ideal 7260 Hydraulic Paper Guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ideal 7260 Hydraulic Paper Guillotine Price: 11000 EUR Download PDF Ideal 7260 Hydraulic Paper Guillotine Machine in very good condition, ready for production. This professional cutter is designed for high-performance cutting. This model offers excellent value for money. The guillotine has a 721 mm knife length and is equipped with infrared safety curtains, a hydraulic hold-down device, and an electromechanical cutter b ...

Ideal 5222 Digicut Hydraulic Guillotine - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Ideal 5222 Digicut Hydraulic Guillotine Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Ideal 5222 Digicut Hydraulic Guillotine Price: 5250 EUR Download PDF Ideal 5222 Digicut Hydraulic Guillotine The machine is 100% functional and has been serviced. This model has the most extensive equipment. The machine was purchased from a government office. Technical specifications: Working width: 520mm Stack height: 80mm Minimum remnant: 22mm Maximum distance from the saddle to the knife: 520mm 230V power supply  ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hammer mill Manufacturer: NEUE HERBOLD Type HM 450/300 Working width: 300 mm Rotor width: 450 mm Drive: 18.5 kW -NEW MACHINE- size reduction of brittle plastics like electronic scrap, wood scrap, and organic insulation material.

100 mm diameter pile driver suitable for Hammer HM100