137,648 used machines on RESALE, but how to find them? Machine Search
Key data: 150 kg, 480 mm, 375 mm
Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg
Inv. Num. : 8407 Type: MB 4134 Producer:- Generated: Parameters: Stroke: 625 mm Maximum stroke rate: 150 1/min Ram weight: 250 kg Anvil weight: 2800 kg Machine length: 2615 mm Machine width: 1180 mm Machine weight: 7850 kg
pressure: . t stroke: . mm total power requirement: . kW weight of the machine ca.: 3 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ram weight: 100kg. Including anvil block, anvil, standard dies and motor. Total weight: approx. 3400kg including anvil block. The machine was purchased in working condition in 2019 and has not been operated since. The hammer has very good compression and is in good condition. Low operating hours, no continuous operation. The sliding surfaces of the ram are greased. Documentation available. An on-site inspection is possible.
Used Auction-ID: A1-50849-618
1 pallet with various designs of (chopping) hammers Auction-ID: A1-50656-203
6,800 litre, Stock number: T3984, Litre: 6800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Lying: 4 pcs. legs, End bottoms: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: 650 x 850 mm, Agitator: Yes, Agitator type: Paddle agitator, Working temperature: 0/150° C, Working pressure double jacket: 3.5 bar, Inner diameter: Ø 1900 mm, Total height: H 2400 mm
750 litre, Stock number: T3987, Litre: 750, Material: Stainless steel AISI 304, In stock: Yes, Item: Transportation tank, Amount in stock: 9 pcs., Standing: On 4 pcs. legs with truck grip, Top: Conical, Bottom: Conical, Tank cover: On the top, Ø 400 mm, Inner diameter: Ø 940 mm, Total height: H 1680 mm
10,000 litre, Stock number: T3067, Litre: 10000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, closed, Bottom: Dished, Tank cover: In the side, bolted, Ø 400 mm, Working pressure: 3 Ato, Inner diameter: Ø 1900 mm, Total height: H 4150 mm
700 litre, Stock number: T2962, Litre: 700, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Flange for agitator at the top, Working pressure: 3 ATO, Inner diameter: Ø 790 mm, Outer diameter: D 950 mm, Total height: H 2215 mm
JCB 1700W Demolition Hammer | 21-DH1700 Auction-ID: A1-40900-544
diameter: 400 mm workpiece length: 8000 / 9700 mm number of blows: 4 Forging power: 3600 (4x 900) kN no. of strokes: 270 Hub/min length: Hammer 610 mm Material Inlet Diameter: round: 400/ Square 320 mm Control: GFM CNC total power requirement: 1600 kW weight of the machine ca.: 493 t dimensions of the machine ca.: 44 x 20,5 m The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipulator A - stroke: 7140mm -- Manipulator B - stroke: 9940mm -- Maximum diameter in the manipulator: 400 mm -- High travelling speed of the manipulator: 500 mm/sec. -- Feed speed of the manipulator: 10 - 200 mm/sec. infinitely variable - Loading/unloading: -- Loader: max. load capacity: 2500 kg --- max. workpiece length: 3000 mm --- Minimum workpiece length: 15 ...
diameter: 130 mm workpiece length: 4000 mm number of blows: 4 Forging power: 1600 per Hammer kN no. of strokes: 620 Hub/min length: Hammer 270 mm Material Inlet Diameter: round: 130 / Square 115 mm total power requirement: 280 kW weight of the machine ca.: t dimensions of the machine ca.: 24,7 x 16 m The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Manipulator feeding speed: 15 - 200 mm/sec. infinitely variable - Loading / Unloading Devices -- Bar Loader: max. load capacity: 300 kg -- max. work piece length: 2.100 mm -- min. work piece length: 00 mm -- Bar Unloader: max. load capacity: 300 kg -- max. work piece length: 4.000 mm -- min. work piece length: 500 mm - Electrics with Controls and Pulpits - Hydraulics and Pneumatics Curre ...
Plot has been tested for operation Auction-ID: A1-40164-49
Plot has been tested for operation Auction-ID: A1-40164-285
Plot has been tested for operation Auction-ID: A1-40164-24
Plot has been tested for operation Auction-ID: A1-40164-62
Plot has been tested for operation Auction-ID: A1-40164-66
Plot has been tested for operation Auction-ID: A1-40164-280
Plot has been tested for operation Auction-ID: A1-40164-29
Plot has been tested for operation Auction-ID: A1-40164-63
Plot has been tested for operation Auction-ID: A1-40164-25
Plot has been tested for operation Auction-ID: A1-40164-27
Plot has been tested for operation Auction-ID: A1-40164-64
Plot has been tested for operation Auction-ID: A1-40164-65
A single-blow PS hammer produces a high impact force thanks to a single blow between the inner piston and the metal base welded to the walls of silos and hoppers. This action is effective when moving powder, which tends to compact under pressure or stick to walls, as well as most granular materials and bulk materials. For this reason, the PS series is the ideal solution for bridge and rat hole problems. Technical data sheet: Compact design with integrated valve. Outstanding performance Easy installation Suitable for operation in hazardous areas Discontinuous duty cycle Noise level 125 dB Temperature -20 °C / 80 °C Operating pressure: 3-6 bar (44-87 PSI). Direct effect on the product. It does not create tension in the structure.
21033665 Offer includes 1 piece, the other items visible in the photos are not part of the offer Auction-ID: A7-51314-205
16006052 Used and unchecked Auction-ID: A7-51315-186
19049531 Auction-ID: A7-51315-27
17004839 Used and unchecked Auction-ID: A7-51315-428
length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
10 € 
