hydraulic hammer used for sale

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...

Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details.

Scissors

Conditie Old Stock Version 1 inch BSP Boring in mm 200 mm Stroke in mm 500 mm Shaft 75 mm Length retracted H.o.H. in mm 1010 mm Length from H.O.H. in mm 1510 mm Pressure in bar 200 bar Strength, kilo at 200 bar 60 ton Length 110cm Width 30cm Height 30cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Scissors

Scissors

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Scissors

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

Hydraulic and pneumatic sole attaching press. Auction-ID: A7-45167-5

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

Machine used for creating decorative or functional creases on the shoe upper. Auction-ID: A7-45167-20

3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

Key data: 2540 mm, 6 mm

Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with display Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 5500 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Pipe: Outer diameter mm -Stroke: 250 mm -Total length when retracted: 500 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 8 pieces -Dimensions: 500/200/H135 mm -Weight: 19 kg/piece

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 45 mm -Stroke: 170 mm -Total length: retracted 580 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Number: 2 pieces -Price: per piece -Dimension: 580/95/H125 mm -Weight: 16.9 kg

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Stroke: 385 mm -Total length: retracted 675 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 16 pieces -Price: per piece -Dimensions: 675/145/H270 mm -Weight: 41 kg/piece

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 855/285/380 mm -Weight: 311 kg/unit

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Manufacturer: Hydac, hydraulic unit S914/1999 22 266 -Motor: ADDA 1.1 kW/1380 rpm -Hydraulic tank: with level indicator -Pressure display: up to 60 bar -Accessories: see pictures -Dimensions: 240/300/H540 mm -Weight: 36 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders, lifting cylinders -Manufacturer: GSL (German Standard Lift), hydraulic cylinder single-acting stroke 20 mm -Type:E0400180H30020 T17 / E0400180H 30020 T19 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 220 mm -Hole: 1x Ø14 mm / 5x Ø15 mm -Number: 6x cylinders available -Price: per piece -Dimensions: Ø 50 x 220 mm -Weight: 2.8 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 250 mm -Total length retracted: 600 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Dimensions: 460/170/H140 mm -Weight: 17.7 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 40 mm, M16 x 2 -Stroke: 940 mm -Total length: retracted 1080 mm -Admission: cylinder: Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Number: 2 pieces -Dimensions: 1080/156/H110 mm -Weight: 24,2 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 304 mm -Total length retracted: 600 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 600/225/H135 mm -Weight: 24 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: stroke 75 mm -Piston rod: Ø 40 mm -Mounting holes: Ø40 x 45 mm / Ø40 x 28 mm -Cylinder: outer Ø 106 mm -Number: 2 cylinders present, rod head: 1 pc. bolted, 1 pc. welded -Price: per piece -Dimensions: 520/145/H110 mm -Weight: 18 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 385 mm -Total length: retracted 683 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 9 pieces -Price: per piece -Dimensions: 683/145/H270 mm -Weight: 41 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 32 mm -Pipe: Outer diameter mm -Stroke: 170 mm -Total length when retracted: 405 mm -Mount: Bore Ø 30 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 3 pieces -Dimensions: 405/110/H100 mm -Weight: 9.3 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from a Dorstener BBM press brake type: APE80-3050 -Piston diameter: approx. 150 mm -Piston rod: Ø 140 mm -Stroke: 200 mm -Admission piston rod: mm -Number: 2x cylinders available -Price: per piece -Dimensions: 400/380/H825 mm/piece -Weight: 270 kg/piece

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Pipe: Ø outer 145 mm -Stroke: 302 mm -Total length: retracted 640 mm -Mount: Bore Ø 40 mm -Quantity: 2 pieces -Price: per piece -Dimensions: 640/145/H210 mm -Weight: 38 kg/piece

Hydraulic cylinders, support cylinders, hydraulic pistons, pressure pistons, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from Fischer DHS 12/3000 guillotine shear -Piston rod: Ø 140 mm -Stroke: 170 mm -Number: 2 cylinders available, 1 left / 1 right -Price: per piece -Dimensions: 270/270/H565 mm -Weight: 326 kg/unit

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system for form folding machine, profiling machine, profiling system, slat production, blinds production -Handover: in the current condition as seen -The punch is without a hydraulic unit but can be supplied at an additional cost -Insert tool -2 punches -both sliding: 500 mm -for small punching jobs -Dimensions: 1230/2020/H1100 mm -Weight: 986 kg

Hydraulic power unit, hydraulic pump, hydraulic test pump -Hydraulic unit with: 1x pump and pressure equalization -1x Hydraulic pumps: of type -1x pump max. pressure: 120 bar -1x pump max. flow rate: 30 l/min -1x Drive: 7.5 kW 1450 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 1010/760/H1325 mm -Weight: 532 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic power unit, double hydraulic pump -Double hydraulic pump: from Battenfeld BA-T2400 injection molding machine -Drive: Siemens type 1LA6 207 30 kW 1465 rpm -Flow rate: l/min -Valves: Voith type DBV40 E25 FYM320 24 / DBV20 E25 FYM320 24 -Filter unit: Hydac -Operating pressure: bar -Dimensions: 1275/620/H500 mm -Weight: 322 kg

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station, injection molding machine, plastic injection molding machine, plastic injection molding press -Manufacturer: Flutec, hydraulic unit from Battenfeld BA 600 CDC injection molding machine -Type: PT-350/4.0/M/ FL086-E -Pump: Brueninghaus type A10VS 0 71 DFR1/31 210 bar -Motor: Brandstetter 11 kW / 1450 rpm -Individual components: see photos -Dimensions: 1130/430/H350 mm -Weight: 152 kg

Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Handover: in the current state as viewed -Use: as a spare part stock -Hydraulic unit: from Gruse lifting table ELT 1.5-10-1 -Motor: HPI 2.3 kW/2750 rpm -Hydraulic pump: HPI A5087577 -Price: per piece -Number: 2 pieces -Dimensions: 550/700/H180 mm -Weight: 39 kg

Pull cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Enerpac, hydraulic cylinder, compressive force 22 tons -Type: RD 2510 C.B4B -Stroke: 245 mm -Cylinder: outer Ø 90 mm -Piston rod: Ø 45 mm -Recordings: Ø32 x 38 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 695/90/H95 mm -Weight: 23.5 kg/pc.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: Hydraulic tilt cylinder stroke 125 mm -Type designation: 58610 L1405 -Piston rod: Ø 30 mm -Hole: Ø40 x 40 mm -Cylinder: outer Ø 83 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 545/140/H83 mm / 550/130/H83 mm -Weight: 9.8 kg / 9.6 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63/86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / Thread Ø28 x 25 mm -Cylinder: outer Ø 75 mm -Mounting: Bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 370/140/H145 mm -Weight: 11 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Parker, hydraulic cylinder, stroke 625 mm -Type: U-3LRS33M -Piston rod: Ø 35 mm -Receiver: Shaft Ø 25 /10 mm -Cylinder: outer Ø 70 mm -Quantity: 2 cylinders available, different mounting plates (see photos) -Price: per piece -Dimensions: 820/76/118 mm / 820/118/118 mm -Weight: 14.8 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -double-acting -Manufacturer: GSL, hydraulic cylinder, tilting cylinder, with control valve, stroke 1590 mm -Type designation: D040025-Z T06 -Piston rod: Ø 25 mm / Mounting Ø 20 mm -Number: 6 cylinders available -Price: per piece -Dimensions: 1895/105/110 mm -Weight: 22.8 kg/pc.