hydraulic hammer used for sale

This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44803-228

This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.

This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.

This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details.

This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2003. This Krauss Maffei KM125-520C2 features a clamping force of 1250 kN and an opening stroke of 900 mm. It has a screw diameter option of 35 / 40 / 45 mm and a shot volume of approximately 156 / 204 / 258 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM125-520C2 machine we have for sale. Contact us for further details.

This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine.

This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine.

Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for 0 pipes. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 1000 x 1400 mm Weight: 310 kg Auction-ID: A7-44803-26

This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine.

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. Its equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine.

Hydraulic press for crimping hydraulic hoses, equipped with all the necessary dies for 0 hoses. 5 to 50 mm, never used 0 hours, packed in wooden crate Overall dimensions: 1000 x 800 x 1000 mm Weight: 270 kg Auction-ID: A7-44803-60

This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine.

: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 € : 436.8 € : 150 to : 1520 mm : 300 mm : hydraulisch : 11 kW : 2630 mm : 1000 mm : 2450 mm : 3270 kg : 610 mm : 1520 mm : 5 mm/s : 9 mm/s : 10 mm : 100 mm : 190 mm 2 guidings big upper tool holder and table witht-slots upper and lower pressbrake tool manometer rapid down move with automtic changeto working speed piston stops in every position 2 hand panel and foot pedal height adjustable table user manual in Germanand English according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information.

Key data: 200 t

Capacity: 2000kN Year: 2017 Serial: 17X00095 Max Daylight: 1700mm Stroke: 1200mm Max Tooling Base Size: 2500x1500mm Max Advance Speed: 200 mm/s Electrical Supply: 415 Volts Phase: 3 Motor Rating: 50kW Continuous Approx. Net Weight: 25,000kg Max. Top Tool Weight: 10,000kg

A hydraulic transfer molding press Lauffer is available. Press force: 125t, power: 15kW, hydraulic oil volume: 300l, machine dimensions X/Y/Z: approx. 2200mm/1400mm/3000mm, weight: approx. 6500kg. An on-site inspection is possible.

Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15 TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations.

Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 3 units available, consider the opportunity to buy this Krauss Maffei 35-180 CX hydraulic injection moulding machine. Contact us for further details.

LASCO TSP 160 S forging press was built in Germany by Langenstein & Schemann A.G. (Lasco Umformtechnik GmbH). The machine has been continuously maintained and upgraded throughout its service life. In 2019, a major upgrade was carried out, which included replacing the seals, upgrading the control system, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The LASCO TSP 160 S is an extremely versatile hydraulic press designed for the production of extremely precise, repeatable and yet complex parts. It is ideal for forges and industrial plants that require high press forces and high repeatability of the manufactured parts. Its main purpose is die forging, metal stamping and metal forming, especially hot forming of steel or aluminium workpieces. It also enables punching, calibration of forgings, trimming and blanking of workpieces after the forgin ...

Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details.

Scissors

Conditie Old Stock Version 1 inch BSP Boring in mm 200 mm Stroke in mm 500 mm Shaft 75 mm Length retracted H.o.H. in mm 1010 mm Length from H.O.H. in mm 1510 mm Pressure in bar 200 bar Strength, kilo at 200 bar 60 ton Length 110cm Width 30cm Height 30cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)

Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible.

Scissors

Scissors

Haco PPES 110 ton x 4100 mm CNC Capacity: 110 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 11 mm/sec Returning speed: 100 mm/sec Electric motor (power): 11,4 kW Length: 4210 mm Depth: 1500 mm Height: 2530 mm Weight: 11 ton

12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

Scissors

9 assen: Y1 / Y2 / X / R / Z / V / X1 / X2 / X3 3 CNC-gestuurde frontplaatsteunen Capacity: 2000 ton x 14 meter Backgauge: CNC Control: 2D Touch Passage between uprights: 12470 mm Max stroke: 900 mm Max distance between table -- ram: 1600 mm Depth of throat: 1255 mm Table width: 800 mm Locking speed: 77 mm/sec Working speed: 9 mm/sec Returning speed: 85 mm/sec Electric motor (power): 2x 90 kW Length: 16835 mm Depth: 5695 mm Height: 6750 mm (above floorlevel) Weight: 370 ton Capacity: 2000 ton Bending length: 14 000 mm

Hydraulic injection moulding machine manufactured in 2014. This Arburg 470 H 1000-170 features a closing force of 100 tons and a screw diameter of 15/25 mm. It includes a selection unit and a single platen design, with a beam spacing of 470 x 470 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 470 H 1000-170 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 1999. This Engel ES 16050/1100 DUO features a clamping force of 1100 T and a screw diameter of 150 mm. It has an opening stroke of 1800 mm and a total weight of 77,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel ES 16050/1100 DUO machine we have for sale. Contact us for further details.

Hydraulic and pneumatic sole attaching press. Auction-ID: A7-45167-5

3 assen: Y1 / Y2 / X Handmatige bombeertafel De achterkant van de machine is gesloten. Capacity: 175 ton x 3600 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Locking speed: 80 mm/sec Working speed: 9 mm/sec Returning speed: 95 mm/sec Electric motor (power): 15 kW Length: 3880 mm Depth: 1750 mm Height: 2750 mm Weight: 13,4 ton

Key data: 2540 mm, 6 mm

Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with display Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 5500 kg

Machine used for creating decorative or functional creases on the shoe upper. Auction-ID: A7-45167-20

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm -Pipe: Outer diameter mm -Stroke: 250 mm -Total length when retracted: 500 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Quantity: 8 pieces -Dimensions: 500/200/H135 mm -Weight: 19 kg/piece

A completely renewed and overhauled Oevermann press is available. Press force: 150t, reach: 400mm, stroke: 400mm, installation height: 600mm, table dimensions X/Y: 1200mm/710mm, drive power: 37kW, weight: approx. 9500kg. The following areas have been renewed and overhauled: hydraulics, components, tank, lines and safety devices. The control system has been completely newly installed. Documentation available. An on-site inspection is possible.

hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: GSL (German Standard Lift),,Hydraulic cylinder single-acting stroke 25 mm -Type: E0400180H20025 E0400180H2/0025 -Cylinder: Ø 40 mm -Piston rod: Ø 18 mm / M10 -Pipe: outside diameter 50 mm -Total length retracted: 240 mm -Hole: Hole Ø 20 mm -Number: 6x cylinders available -Price: per piece -Dimensions: 240/50/H68 mm -Weight: 2.4 kg/piece

Key data: 200 t, 80 mm

Inv. Num. : 9036 Type: 200 T Producer: ROSS Created: 2003 Parameters: Control system: DIMECO MCU 24 Compressive force: 200 t Table length: 2100 mm Table width: 1000 mm Stroke: 80 mm Adjusting the ram: 150 mm Machine weight: 36700 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 45 mm -Stroke: 170 mm -Total length: retracted 580 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Number: 2 pieces -Price: per piece -Dimension: 580/95/H125 mm -Weight: 16.9 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Stroke: 385 mm -Total length: retracted 675 mm -Mount: Bore Ø 40 mm -Ideal for building a hydraulic press -Quantity: 16 pieces -Price: per piece -Dimensions: 675/145/H270 mm -Weight: 41 kg/piece