hydraulic hammer used for sale

Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

pressure: 80 t stroke: 400 mm total power requirement: 4,0 kW : 7,4 mm/s : 11,5 mm/s Heads: 160x95 mm weight of the machine ca.: 725 kg dimensions of the machine ca.: 1560x850x2400 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via lever / manual over hand lever - Pressure gauge via pressure gauge - Material supports per cylinder in the height adjustable - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 400 mm table surface area: 920 x 560 mm dayligth: 900 mm distance between columns: 300 mm Heads: 175x115 mm feed down: 7,6 mm/sec feed up: 13,4 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1600x850x2450 mm Domestic equipments: - Stable welded construction - Pressure cylinder laterally adjustable - Electric control via selector lever / manually via hand lever - Pressure gauge via pressure gauge - Material requirements - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 24 mm -Piston tube outer diameter: Ø 86 mm -Stroke: 290 mm -Number: 2 cylinders available Price: per piece -Weight per piece: 12 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Manufacturer: Lauffer Model: 400 T Year of Manufacture: 1992 Type of Machine: Hydraulic Press - column-guided, but (without die cushion) - contactor control - digital position measuring system, Technical Data - Max. Pressing Force: 4000 kN - Max. Return Force: 340 kN - Ram Stroke: 500 mm - Installation Height (Platen/Ram): 1100 mm - Column Clearance (Front/Side): 1200 mm / - - Table Size: 1200 × 800 mm - T-Slots on Table (DIN 650): 22 H11 mm - Table Height: 850 mm - Ram Surface: 1200 × 800 mm² - T-Slots on Ram (DIN 650): 22 H11 mm - Drive Power: 76 kW - Max. Operating Pressure: 290 bar - Control Pressure: 90 bar - Machine Weight: 23000 kg Find more here - / Contact us at -

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Engine power: 18.4 kW -Speed: 1400 rpm -Max. pressure: 180 bar -Oil cooler -Weight: 450 kg

Refer to code 1173 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Qty. 1 Second-hand extrusion press line – in storage – never installed! Mfc.: Korean Manufacturer Force: 1650 UST Built: 2024 Type: Direct Single Action Horizontal Short Stroke Back Loading Aluminum Hydraulic: Rexroth PLC: Mitsubishi Diameter of billet: 152 mm (6 inch) Length: 400 – 750 mm Size of container: Φ157 mm × 800 mm Size of exit hole: Φ180 × 250 mm Container Size Inner Dia.: 164 mm (6˝) Length: 700 mm Main Ram Stroke: 1200 mm Scope of supply: Loading Lift System Billet Pushing Induction heating Furnace Billet Conveyor for Discharge Billet Feeding into Press Cooling System Hot Saw Run-out Table Double Puller Stretcher Finishing Saw Dies Furnace Aging Furnace

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209

Refer to code 1184 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Veneer jointing guillotine, hydraulic Brand: Casati Type: TO/CC 3600 New machine Technical data: Cutting length: 3.600 mm Daylight opening of the clamping beam: 100 mm Max. rear feed width 800 mm Min. rear feed width 25 mm Hydraulic unit motor power 10 PS Rear feed motor power 0,5 PS Equipped with: - Motordriven feed of the back fence - Cutting edge light - Millimeter counter - Manual and automatic working cycle. The operator can choose between: manual working cycle (separated controls for each phase of the working cycle) or automatic working cycle (one only push-button control for the whole cycle) - hydraulic control valve of speed and pressure of knife beam and clamping beam - central system of lubrication - knife made with special steel - angular fence - Photocells and guards as per EC rules Options for an extra charge - Photo cells and guards ...

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -double pump -Max. pressure: 60/200 bar -Liter flow rate: 6/24 l/min -Motor power: 5.5 kW -Speed: 1445 rpm -Hydraulic valves -Hydraulic tank -Hydraulic filter -Weight: 230 kg

Hydraulic unit, hydraulic pump, hydraulic pump -Spare part E forklift -Power supply: 24 volts -Power: 2.8 kW -Speed: 1600 rpm -Hydraulic tank -Weight: 70 kg

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

32-46-63-80-100 cm3 radial piston hydraulic pumps for sale, new and light used. These pumps are spare parts for plastic injection molding machines that are in stock. Many pumps are fully equipped with proportional valves for control. Each pump is tested and certified. There are also photos of the outside and inside. A personal viewing is also possible on site. Please also take a look at our other advertisements.

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 80 bar -Liter flow rate: 18 l/min -Motor: 2.2 kW 950 rpm -Hydraulic tank: 800/650/H280 mm -Dimensions: 1000/650/H1150 mm -Weight: 400 kg

Rotary feedthrough, rotary valve, rotary distributor -for hydraulics -Number: 2x large opening -Number: 8x control cable, smaller bore -Dimensions: 350 x 400 mm -Weight: 45 kg

Hydraulic motor, oil motor, hydraulic pump Model No.: 013.44186 -Toothed shaft mounting: Ø 44 mm -Dimensions: 470/260/320 mm -Weight: 130 kg

Manufacturer: Translift, Year: ca.1995, Lifting power kg: 800, Length mm: 1300, Width mm: ca.850, Lifting hight approx. mm: ca 800, Total hight mm: 60, Pedal switch: yes, Hand switch: no, Sicherheitsleiste: yes, Carriage: no, Ausparung für Zinkenbreite 200 mm, Year :ca.1995

Manufacturer: Laweco, Type: Hydraulikhubtisch, Year: 1988, Lifting power kg: 7000, Length mm: 3800, Width mm: 2000, Total hight mm: 470, built-on roller conveyor: no, Year :1988

radial piston motor, hydraulic motor, oil motor, hydraulic pump -Shaft mounting: Ø 63 mm -Number: 1x motor available -Price: per piece -Recess recording: 314 mm -Dimensions: 550/460/460 mm -Weight per motor: 190 kg

Hydraulic motor, oil motor, hydraulic pump -Model Type: MF100 -Toothed shaft mounting: Ø 40 mm -Quantity: 2 available Price: per piece -Dimensions: 430/240/200 mm -Weight: 50 kg/piece

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

Manufacturer: Hydraulikhubtisch, Year: ca.1995, Lifting power kg: 2000, Length mm: 3200, Width mm: 1400, Lifting hight approx. mm: 1800, Total hight mm: ca 450, Hand switch: yes, Year :ca.1995

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca 2000, Length mm: 1.400, Width mm: 1.200, Total hight mm: 770, built-on roller conveyor: yes, FREE TEXT: 2 Stck vorhanden,

Hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 63 bar -Liter flow rate: 4 l/min -Drive: 0.75 kW -Hydraulic tank -Hydraulic valve - Additionally: Hand hydraulic pump -Weight: 110 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 40 bar -Liter flow rate: 15 l/min -Drive: 0.55 kW 1400 rpm -Hydraulic tank -Foot switch -Weight: 100 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 50 mm -Piston rod: 36 mm -Stroke: 580 mm -Total length when retracted: 820 mm -Total length extended: 1400 mm -Piston rod thread -Ideal for building a hydraulic press - universally applicable -Dimensions: 1040/220/H200 mm -Weight: 30 kg

Hydraulic press, single-column high-speed press, C-column press, oil-hydraulic press - Pressing force of the ram: approx. 35 tons -Clamping table: 500 x 470 mm -Insertion height: 650 mm -Insertion width: 275 mm -Dimensions: 1300/900/H3200 mm -The machine can be dismantled to a height of: 2700 mm -Weight: approx. 1500 kg

Manufacturer: Gruse Maschinenbau, Type: ELS 1-10-6-G-SO, Year: 2013, Lifting power kg: 1000, Length mm: 1500, Width mm: 1000, Lifting hight approx. mm: ca.1000, Total hight mm: 230, Safety strip: yes, Carriage: no, Total power kW: 2,3, Wight approx. kg: 870, CE-Sign: yes, FREE TEXT: Gabelstapler ausparung/Handbedienpaneel, Year :2013

Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Wight approx. kg: ca 1800, Year :1993

Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools Quantity: 4 pieces -Clamping height: 95 mm Price: for 4 pieces -Weight: 10 kg

Manufacturer: Laweco, Type: Hubtisch, Year: 1993, Lifting power kg: 1.000, Length mm: 3.100, Width mm: 1.000, Lifting hight approx. mm: ca 1.500, Total hight mm: ca 500, built-on roller conveyor: yes, Year :1993

Manufacturer: Unbekannt, Year: ca.1990, Lifting power kg: ca.3000, Length mm: 5000, Width mm: 1200, Lifting hight approx. mm: ca.1200, Total hight mm: 400, Safety strip: yes, FREE TEXT: Maschine wird gereinigt Lackiert Steuerung erneuert, Year :ca.1990

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar

Manufacturer: Hydraulikhubtisch, Lifting power kg: ca.3000, Length mm: 2800, Width mm: 2000, Total hight mm: 700, built-on roller conveyor: yes,

Manufacturer: Trepel, Type: Hydraulikhubtisch, Year: 1972, Lifting power kg: 1000, Length mm: 2900, Width mm: 1700, Total hight mm: 300, Carriage: yes, built-on roller conveyor: no, FREE TEXT: ohne Schaltschrang inkl Hydraulistation, Year :1972

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: approx. 150 bar -Liter flow rate: approx. 30 l/min -Drive: 3 kW 1400 rpm -Dimensions: 520/360/H340 mm -Weight: 65 kg

Hydraulic pressure switch -Type: TGL10952 -Adjustable: from 0 to 320 bar -Price: per piece -Number: 9 available -Weight: 0.5 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston diameter: approx. 90 mm -Piston rod: Ø 50 mm -Stroke: 260 mm - universally applicable: can be used -Dimensions: 660/180/H100 mm -Weight: 28 kg

Double hydraulic pump, oil pump, gear pump -Shaft mounting: Ø 21.5 mm -Number: 3x hydraulic pumps available -Price: per piece -Dimensions: 270/120/110 mm -Weight: 6.7 kg

Manufacturer: Scherenhubrollenbahn, Year: ca 2001, Length mm: 4800, Width mm: 710, Total hight mm: 260, Hand switch: yes, Safety strip: yes, Carriage: no, built-on roller conveyor: yes, FREE TEXT: Rollenteilung 80 40 Rolle, Year :ca 2001

Manufacturer: Istel, Type: Hebevorrichtung Motorisch, Lifting power kg: ca.200, Length mm: 1600, Width mm: 790, Lifting hight approx. mm: 1100, Total hight mm: 250, Hand switch: yes, Safety strip: no, Total power kW: 1,1, CE-Sign: no,