hydr pressbrake used for sale

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Manufacturer: Hebebühne, Lifting power kg: 3000, Length mm: 4000, Width mm: 1250, Total hight mm: ca.400, Safety strip: yes, built-on roller conveyor: no, Total power kW: ca.3,

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Hydraulic pump: Type 0510 525 311 -Motor: emod 5.5 kW 2870 rpm -Dimensions: 630/320/H280 mm -Weight: 49.1 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer Sundstrand, hydraulic unit -Hydraulic pump: type TFP100/3.8 D CO 01 LAB F/40 -Motor: Dietz 1.5 kW 2850 rpm -Dimensions: 400/220/H165 mm -Weight: 15.5 kg

Hydraulic power unit with pressure accumulator

Manufacturer: Beyeler Model: CC 5150X25 E Year of Manufacture: 1980 Type of Machine: Hydraulic Guillotine Shear Material Thickness Capacity: 25 mm Weight: ~48,000 kg Dimensions (LxWxH): 6.5 m x 4 m x 3.5 m Find more here - / Contact us at -

CONTROLS   PC controller BECKHOFF C 6140 PRESS DESIGN   drive system: hydraulic   frame design: H-frame, monoblock   quick die change system: yes   feedstock transport direction: left to right SLIDE   total force (nominal): 410 to   stroke: 200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 200 mm/s   working velocity min.: 8 mm/s   working velocity max.: 80 mm/s   return velocity max.: 150 mm/s COUNTER RAM   nominal force: 120 to   stroke: 40 mm V-RING   nominal force: 250 to   stroke: 40 mm TOOL DIMENSIONS   lower table (left-right): 820 mm   lower table (front-back): 1250 mm   upper table (left-right): 820 mm   upper table (front-back): 1250 mm   shut height max.: 410 mm STRIP-FE ...

Haco HSL 4100 x 12 mm Cutting length: 4100 mm Max sheet thickness st 45: 12 mm Strokes/min: 7 > 11 str/min Adjustable cuttingedge: 0,5 > 3° Length: 4900 mm Depth: 2180 mm Height: 2250 mm Weight: 11 ton Number of sheet holders: 23x

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Bosch, hydraulic unit -Engine: 11.1 kW 2760 rpm -Individual components: see photos -Dimensions: 1010/480/H1050 mm -Weight: 263 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Danfoss, hydraulic motor -Type: OMP 50 151-0020 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 12x aggregate available -Price: per piece -Dimensions: 190/130/H125 mm -Weight: 5.9 kg

Manufacturer: NEFF Model: 4SP 160 Year of Manufacture: 2011 Operating Hours: 25 aprox Type of Machine: Hydraulic Press Weight: 7000 kg Condition: Used Control System: Siemens S7 (PLC) Technical Specifications - Press Force: 1600 kN (adjustable from 160–1600 kN) - Return Force: Approx. 160 kN - Stroke (Hub): 500 mm - Table Size (W x D): 2000 x 800 mm - Ram Size (W x D): 2000 x 800 mm - Clear Height (Ram Up): 700 mm - Max. Daylight (Open Height): 2850 mm - Table Height Above Floor: 800 mm - Clearance Between Columns (W x D): 1600 x 410 mm - Installation Space (W x D x H): 2000 x 800 x 700 mm Electrical System - Operating Voltage: 400V AC - Control Voltage: 24V DC - Valve Voltage: 24V DC - Frequency: 50 Hz - Voltage Fluctuation Tolerance: ±5% - Max. Ambient Temp: 35°C Find more here - / Contact us at -

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Hydraulic unit type CB140 H 116 -Pressure: up to 150 bar -Flow rate: 6 l/min -Hydraulic tank: with level indicator -Individual components: see photos -Dimensions: 700/400/H710 mm -Weight: 125 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

Rolling mill 800x800 mm, built in 1996 Roller shell thickness 60 mm

hydraulic oil tank, hydraulic oil reservoir, hydraulic tank -Manufacturer: Baumann, hydraulic tank from electric forklift EVS 25/14 -Contents: Ltr. -Dimensions: 380/125/130 mm -Weight: 5 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, hydraulic pump from electric forklift Baumann EVS 25/14 -Type: Char-Lynn 104-1377-006 -Shaft: Ø 31 x 35 mm -Number: 2x hydraulic motor available -Price: per piece -Dimensions: 245/140/120 mm -Weight: 10.5 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 50/50 -Stamp diameter: 112 mm -Pressure: max. 450 bar -Lifting capacity: 50 t -Dimensions: 220/160/H220 mm -Weight: 19 kg

LVD MVB 3100 x 6 mm Cutting length: 3100 mm Max sheet thickness st 45: 6 mm Passage between uprights: 3300 mm Strokes/min: 18 > 60 str/min Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 7,5 kW Weight: 6 ton

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Lukas, single-acting light metal cylinder with spring return stroke 50 mm -Type designation: HP 50/50 -Stamp diameter: 110 mm -Lifting capacity: 50 t -Dimensions: 220/165/H220 mm -Weight: 19.5 kg

Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 0 510 425 009 -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 150/125/H120 mm -Weight: 3.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, travel motor, drive motor -Manufacturer: Bosch, hydraulic pump -Type: 1 517 222 492 -Shaft: Ø 16 / 17 x 8 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 116/90/H120 mm -Weight: 2.7 kg

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: EATON, Char-Lynn hydraulic motor -Type: MAE 140 740-0140-140-007 -Shaft: Ø 31x 50 mm -Dimensions: 260/133/H130 mm -Weight: 13.9 kg

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Passage: Ø 34 mm -Hole: Short cone 6 cone Ø 103-106 mm -Thread: M40 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 195 mm -Weight: 23.7 kg

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: OMP 160 151-0025 6 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 1x unit available -Dimensions: 225/130/H120 mm -Weight: 7.5 kg

Key data: 2000 mm, 3 mm

Cutting length adjustment, foot pedal, without stop Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out (or in the existing state for 3,500 €) Sheet width: 2000 mm Sheet thickness steel: 3.0 mm Colour: white Machine weight: 2500 kg Dimensions: 2800 x 1800 x 1500 mm with cutting gap adjustment Connected voltage: 16 A Hold-down: hydraulic Column projection: 250 mm Projection: 60 mm Fixed cutting angle Machine Number: 2892

Hydraulic motor, oil motor, hydraulic pump -Manufacturer: Parker, hydraulic pump -Type: 730-0080 000-064 -Drive shaft: Ø 22 x 35 mm - universally applicable -Hole: Ø 13 mm / Spacing 106 mm -Dimensions: 233/133/H135 mm -Weight: 13.1 kg

Hydraulic pump, high-pressure pump -Max. pressure: 500 bar -Hydraulic connections: 7 -Pressure gauge up to: 600 bar -Pressure: can be switched on/off via foot switch -Pressure: mechanically adjustable -Motor power: 0.15 kW at 1370 rpm

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic unit: with double pump -Motor: Leroy 3 kW / 60 bar -Hydraulic circuit 1: 9 l/min -Hydraulic circuit 2: 21 l/min -Individual components: see photos -Dimensions: 1320/1000/H835 mm -Weight: 351 kg

Offer 25176 Specifications: - max. working width 2040 mm - max. cutting capacity St 40 5 mm - Cutting gap adjustment - Number of hydraulic hold-downs 11 pcs - Engine backgauge 10 - 700 mm - Front angle stop - Stroke rate depending on cutting angle and cutting length 7 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 840 mm - Space required including back gauge, without front support arms -ca. W 2500 x H 1450 x D 1650 mm - Weight approx. 3500 kg - with: - E-foot switch - Cut line illumination

Max. Press force: 1000kN, max. retraction force: 110kN, max. stroke: 360mm, max. working pressure: 251bar, installation height: 560mm, control panel: Siemens SIMATIC OP27, weight: 7.5t, on-site inspection is possible.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 560 mm -Piston rod: Ø 25 mm -Mounting: Bolt circle Ø 100 x 9 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 790/118/H150 mm -Weight: 11 kg/pc.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 200 mm -Piston rod: Ø 20 mm -Mounting: Bolt circle Ø 85 x 8 mm / see photos -Number: 4 cylinders available -Price: per piece -Dimensions: 440/104/H123 mm -Weight: 8.5 kg/pc.

Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Sauer Sundstrand, hydraulic unit from Atlantic ATS 3006 guillotine shear -Hydraulic pump: double version -Motor: EMI 7.5 kW / 1440 rpm -Dimensions: 790/330/H295 mm -Weight: 83.6 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 130 mm -Piston rod: Ø 37 mm -Hole: Ø 30 mm -Pitch spacing: retracted 425 mm -Number: 2 cylinders available -Price: per piece -Dimensions: Ø 83 x 500 mm -Weight: 9.3 kg/pc.

Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 250 mm -Piston rod: Ø 25 mm -Hole: Ø 25/19 mm -Pitch spacing: retracted 465 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 530/60/H73 mm -Weight: 5.9 kg/pc.

Hydraulic manifold block, hydraulic fitting, hydraulic T-manifold, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Configuration: 7x shut-off valve with hose -Pressure: up to 350 bar -Dimensions: 1085/660/H140 mm -Weight: 28 kg

Hydraulic manifold block, hydraulic fitting, hydraulic T-distributor, hydraulic distributor, e metro fitting -Hydraulic distributor: Hydraulic distributor with 10 stations -Type: 3000-2 1/2-76.1 A3L -Installment: 7x shut-off valve with hose and control valve -Pressure: up to 350 bar -Dimensions: 1055/680/H150 mm -Weight: 31 kg

Single column pneumatic press, hydraulic press PAUL ANTON type PVT 2Pneumatic table press, embossing pressFabr. No. 97148 Year of construction approx. 1980Compressive force: 10 tonProjection: 100 mmPlunger stroke: approx. 25 mmPlunger surface: 32 mmTable size: 250 x 220 mmTable opening: 53 x 53 mmTable height: 1060 mmInstallation height: 155 mm- very stable construction- Hydro-pneumatic press with pressure transmission air on oil- pneumatic foot switch- Plunger with internal thread M12- Metal substructureSpace requirement L x W x H 850 x 620 x 1560 mmWeight

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 24 mm -Piston tube outer diameter: Ø 86 mm -Stroke: 290 mm -Number: 2 cylinders available Price: per piece -Weight per piece: 12 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Piston rod: Ø 50 mm -Piston tube outer diameter: Ø 135 mm -Stroke: 300 mm -Weight: 52 kg

Hydr. Spotting press MILLUTENSIL type BV 25 PMMasch. No. 632 / 25111 Year of construction 1991Clamping force 18 ton. Opening force 15 ton. Table surface 775 x 760 mm Clamping surface of the upper table 900 x 550 mmStand width 900 mmInstallation height max. 750 mmInstallation height min. 230 mmStroke of the upper table 520 mmLifting speed stepless 0 - 1000 mm/min. Hydraulic pressure adjustable 10 - 200 barTool weight on the table max. 2500 kgTool weight on the upper table max. 800 kgTable height

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

hydraulic unit -The hydraulic unit comes from a hydraulic elevator -Design: IM 1209

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm

Hydr. Hacksaw KASTO HBS 210 / 240Masch. No. 1116 145 220 Year of construction 1994Saw range at 90 round 210 mmflat 240 x 190 mmsquare 210 x 210 mmat 45 round 150 mmSaw blade length 400 mmStroke rates 62 / 125 strokes per min. Material support height: 500 mmMotor power: 0.5 / 0.75 kWNerg connection: 400 volts, 50 Hz- Drive motor with 2 speeds- Coolant pump in the machine baseSpace required: L x W x H: 1200 x 500 x 1200 mmWeight: 170 kgGood condition; used

hydraulic unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter output: 21 l/min -Weight: 200 kg