hyd press used for sale

Pressure reducing valve, hydraulic valve ORSTA 06-20.01/0 TGL 26234/20 Dimensions: 100 x 35 x 35 mm

Pressure reducing valve, hydraulic valve ORSTA AS 16-2-01 TGL 10950 Nominal pressure: 16 MPa Dimensions: 220 x 130 x 70 mm

Pressure Relief Valve, Hydraulic Valve ORSTA CNS 10-2-02 TGL 10947 Nominal pressure: 16 MPa New ! Dimensions: 105 x 35 x 35 mm

Pressure Switch ORSTA D5 CO 1 ( D5CO1 ) TGL 10952 Pn 32 MPa Dimensions: 195 x 90 x 65 mm

Pressure Relief Valve, Hydraulic Valve ORSTA 06-2.02.01 TGL 26233 / 20 used, tested ! Dimensions: 110 x 34 x 34 mm

Pressure Relief Valve ORSTA CUS 10-2-02 ( CUS10-2-02 ) P= 16 MN/m² TGL 10947 Dimensions: 150 x 75 x 36 mm

Pressure Relief Valve, Hydraulic Valve ORSTA BDS 16-3-04.01 ( BDS16-3-04.01 ) TGL 10947 Nominal pressure: 16 MPa Nominal diameter: 16 mm used, tested ! Dimensions: 215 x 68 x 68 mm

Pressure reducing valve, hydraulic valve ORSTA AH 10-1-01 ( AH10-1-01 ) TGL 10950 Nominal pressure: 16 MPa (160 bar) New ! Dimensions: 230 x 130 x 70 mm

Pressure reducing valve with valve daisy chaining unit, hydraulic valve ORSTA 10-2.0.02 TGL 26234/20 10-11 TGL 262263/30 Nominal pressure: 32 MPa New ! Dimensions: 90 x 70 x 150 mm

Pressure Gauge Selector, Multi-Stage Gauge Insulator HYDAC, FLUTEC MSL2F2.0/100/1450/ 6 levels New ! Dimensions: 130 x 120 x 120 mm

Main Control Pressure Relief Valve ORSTA 10-10 TGL 26238/60 ( TGL26238/60 ) Pn 32 MPa with pressure relief valve 10-3.02.09 TGL 26233 New ! Dimensions: 145 x 80 x 60 mm

Pressure Relief Valve ORSTA 10-2.0.01 TGL 26263/30 Pn 32 MN/m² New ! Dimensions: 90 x 70 x 145 mm

Pressure Reducing Valve, Hydraulic Valve ORSTA 10-4.0.02 TGL 26234 / 20 with valve interlinking unit 10 - 02 TGL 26263 / 20 New ! Dimensions: 85 x 155 x 60 mm

Pressure Switch ORSTA D5 CO 2 HNN012.016 ( D5CO2HNN012.016 ) New ! Dimensions: 70 x 85 x 170 mm

Pressure Gauge Selector, Multi-Stage Gauge Insulator HYDAC, FLUTEC MSL2A2.0/100/1450/ 6 steps used ! Dimensions: 150 x 120 x 120 mm

Pressure Relief Valve, Hydraulic Valve ORSTA HYDRAULIK 10-3.02.09 TGL 26233 / 20 New ! Dimensions: 100 x 44 x 44 mm

Pressure Relief Valve, Hydraulic Valve ORSTA HYDRAULIK 06-3.92.09 TGL 26233 / 20 New ! Dimensions: 90 x 34 x 34 mm

Pressure relief valve, hydraulic valve, with control knob and lock ORSTA HYDRAULIK 04-4.01.02 TGL 26233 / 20 New ! Dimensions: 90 x 36 x 36 mm

Pressure Switch ORSTA D5 CO 2 ( D5CO2 ) TGL10952 PN32 New ! Dimensions: 180 x 65 x 70 mm

Pressure Relief Valve, Hydraulic Valve, Direct-Operated ORSTA CNS 16-1-02 ( CNS16-1-02 ) TGL 10947 Pressure Rating: 16 MPa (160 bar) New ! Dimensions: 155 x 80 x 40 mm

Pressure Relief Valve, Hydraulic Valve, Direct-Operated ORSTA CDS 16-2-02 ( CDS16-2-02 ) TGL 10947 Nominal Pressure: 16 MPa (160 bar) New ! Dimensions: 155 x 80 x 40 mm

Pressure relief valve, hydraulic valve, direct-operated ORSTA CNS 10-2-02 ( CNS10-2-02 ) TGL 10947 Nominal pressure: 16 MPa (160 bar) New ! Dimensions: 105 x 35 x 35 mm

Pressure Switches ORSTA D5 CO 1 ( D5CO1 ) TGL10952 PN32 IP54 New ! Dimensions: 180 x 70 x 62 mm

Pressure Relief Valve, Hydraulic Valve, Direct-Operated ORSTA BDS 16-2-04 ( BDS16-2-04 ) TGL 10947 TGL 10647 Pressure Rating: 16 MPa (160 bar) New ! Dimensions: 220 x 70 x 90 mm

Pressure relief valve, hydraulic valve, direct-operated ORSTA HYDRAULIK 06-1.11 TGL 26233 / 20 TGL 26243 / 20 Nominal pressure: 32 MPa (320 bar) operating head with lock ! New ! Dimensions: 105 x 45 x 45 mm

Pressure relief valve, hydraulic valve, direct-operated ORSTA HYDRAULIK 04-1.31.01 TGL 26233 / 20 04-01 TGL 26263 / 20 Nominal pressure: 32 MPa (320 bar) New ! Dimensions: 130 x 45 x 35 mm

Pressure reducing valve, hydraulic valve, with intermediate plate ORSTA 06-2.0.01 TGL 26234/20 Nominal pressure: 32 MPa (320 bar) used ! Dimensions: 170 x 45 x 50 mm

Pressure switch with intermediate plate ORSTA D5 CO 2 ( D5CO2 ) TGL10952 switching pressure setting range: 1 - 10 MPa (10 - 100 bar) Nominal pressure: 32 MPa (320 bar) IP54 used, tested ! Dimensions: 225 x 65 x 65 mm

Pressure relief valve, hydraulic valve, directly operated ORSTA HYDRAULIK 06-1.12.01 TGL 26233 / 20 Nominal pressure: 32 MPa (320 bar) used, tested ! Dimensions: 155 x 35 x 35 mm

Pressure Relief Valve, Hydraulic Valve ORSTA HYDRAULIK CNS16 HNN012.021/5 Nominal pressure: 16 MPa (160 bar) used ! Dimensions: 170 x 95 x 45 mm

Pressure Switch ORSTA D5 CO 3 ( D5CO3 ) TGL10952 PN32 IP54 New ! Dimensions: 180 x 70 x 62 mm

L-profile: 120 x 120 x 10 mm flat steel: 300 x 15 mm round/square steel: 40 mm punching: dia 28 x 13 mm U/I-profile: 100 mm

Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 0 kg Total power requirement: 2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE) – 22-45 RAM ADJUSTMENT RANGE – 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) – 865MM SIZE OF TOOL MOUNTING PLATE – 1000MM X 1000MM MAIN PRESS MOTOR – 59 KW MAIN MOTOR RAM ADJUSTMENT – 2.2 KW CUSHION FORCE – 70 TON (700 KN) CUSHION STROKE – 40 – 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS VIRTUAL WALK Combination Lot of the following: Lot No. O233 MAESTRI Gas  ...

Pressure reducer, pressure regulator, bladder accumulator, high pressure bladder accumulator, hydraulic accumulator, pressure accumulator, membrane accumulator -Manufacturer: Hydac, pressure accumulator from CNC machining center MAHO MH 800C -Type: SBO140-1.4E1/112U-140FT080 -Operating pressure: max. 140 bar -Quantity: 2x pressure storage available -Price per piece -Dimensions: Ø 145 x 205 mm -Weight: 3.7 kg

Profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press -Bending/straightening press: hydraulic profile bending machine -Base: solid construction, mobile -Hydraulic unit: unfortunately without type designation -Piston rod: Ø 55 mm / stroke: 200 mm -Individual components: see photos -Total dimensions: 1180/1060/H1000 mm -Weight: 445 kg

Manufacturer: Hydrap Model: HPSK 80 Year of Manufacture: 1994 Type of Machine : Hydraulic Press Condition: Used Operating hours: 27,436 h Press Performance - Nominal force: 800 kN - Maximum ram stroke: 300 mm - Overrun distance: 30 mm - Overrun time: 120 ms - Safety distance: 196 mm - Drive type: Hydraulic - Press orientation: Vertical - Number of cylinders: 1 - Cylinder diameter: 210 mm Working Area - Throat depth to ram centre: 250 mm - Minimum daylight table to ram: 500 mm - Clamping table length: 700 mm - Clamping table width: 500 mm - T-slots to DIN: 650 mm - Slot width: 22 mm - Slot arrangement: Diagonal - Clamping plate thickness: 150 mm Electrical Data - Voltage: 400 V - Frequency: 50 Hz - Current type: DC - Drive power: 22 kW - Rated current: 45 A - Mechanical Data - Weight: 6.5 tonnes - Oil viscosity: HLP 46 - Oil quantity: 485 litres Find more here - / Contact us  ...

Frame press HESS HYDRO -used-hand-hydraulic, hydraulic cylinders horizontal, hydraulic cylinders vertical---------- Technical data ----------bale width: 4,000 mm, bale height: 2,550 mm, cylinder stroke: 150 mm, engine: 1.1 kW

Hydraulic fork positioner 550-2000 mm Fork positioner hydraulically by 550-2000 mm, Stacker, has been in use at 2.5 to can be mounted but on any truck, mast, front loader, etc, with integral Sideshift. Adapter plate with mount slots for cultivation. Dimensions available upon request. Adapter plate surface area approx. 715 x 650 mm. Valve block hydraulic pump can be supplied. Sale and mistakes are expressly reserved. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

WEINIG HYDROMAT 22 BL Year of construction 1995 with splitting unit (lamellar saw) Feeding (Automatic feeder and pull-out unit!) With safety hood and soundproof cabin! Machine specifications:  - Planning capacity 220 x 120 mm  - Feeding, 8– 80 m/min, motor 18.5 kW Spindle layout:  Bottom-right-left Top - bottom, table rigid Bottom, table rigid, spindle prepared Top - bottom, table rigid, spindle prepared Gap unit, consisting of 1 right and 1 left spindle each 30 kW (4500 rpm) incl. table roll, sliding roller, spray barrier and gap wedge removal 4 roller pull-out Special pressure and fixtures for the production of top layer slats Feeder (all-in) for slats and pull-out tape     

Installation consisting of 2 lifting tables (in the form of a staircase) each with 1,500 kg load capacity, lifting height: 1.2 m each, incl. base for the higher lifting table (1.5 m high), hydraulic unit and control cabinet. Tables can also be used individually.