hyd press used for sale

Two hydraulic valves from Rexroth, two hydraulic pumps and 5 hydraulic cylinders are offered, all new and indispensable as spare parts 1. 2 Stueck Rexroth Valves MNR: R900912485 DBW 10 B2-52/315-6EW230N9K4 FD: 48121 2. Voac Parker Hydraulics made in Sweden Part No. 3708719 Type F11-058-M8-CF-K-000 Ser No. 2000180541 3. Brueninghaus Hydromatik D-72160 Horb A10VSO 71 DR / 31R PPA12N00 FabrNr: 1117486 Bauj. 04/96 DR = 280 bar Vo =71 cm3 n=1500 min 4. 5 unused, two-sided hydraulic cylinders with bearings Type 70/50-280-625 Length from middle hole to middle hole approx. 625mm Total length approx. 750mm Piston diameter 70mm Rod diameter 50mm Piston path 280mm Special price

Hydraulic unit with hydraulic pump BOSCH REXROTH / HYDRONORMA Hydraulic unit Year of construction approx. 1985 Operating pressure: max. 65 bar Volume flow: 20 litres/min. Tank capacity: 110 litres Engine power: 3 kW Engine speed: 1440 rpm. Mains connection: 400 Volt, 50 Hz - 1 piece Hydraulic vane pump MANNESMANN REXROTH, type 1PV2V3-40/25RA01MC63A1 - 1 piece drive motor KATT, type FFN 100L - 1 piece pressure reducing valve BOSCH REXROTH, type DR 8 G433/100 YM - 1 piece return filter - 1 piece 4/2-way manual valve (e.g. for extending and extending a double-acting hydraulic cylinder) - Hydraulic tank with maintenance cover and oil level sight glass Space requirement L x W x H 900 x 550 x 1150 Net weight: 142 kg good condition; used

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 63 t passage width: 1350 mm stroke: 300 mm total power requirement: 16 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 2,0 x 1,8 x 3,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 500 t passage width: 750 mm stroke: 120 mm total power requirement: 57 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6701 Type: 4000 kN Producer: Hydraulico Created: 1977 Parameters: Control system: SIEMENS SIMATIC OP Compressive force: 4000 kN Stroke: 800 mm Table height: 680 mm

Condition: very good Control system: Siemens Technical details : Machine type: SH-200-2.7 x 1.7 Fabrication No.: P/100010 Year: 2005 TOTAL PRESS WEIGHT: 37300 kg Nominal force: 2000 kN Stroke length max.: 900 mm Installation height: 1400 mm Closing speed: 400 mm/s Working speed max.: 84 mm/s Working speed at nominal force: 30 mm/s Tool footprint max.: 2700 x 1500 mm Tool footprint min.: At nominal force: 1600 x 1100 mm Tool height min.: 500 mm Total tool weight max.: 15 000 kg Tool upper part weight max. : 7500 kg Permitted External load : left-right 30 kNm Permitted Except Load : front-rear 15kNm Installed capacity: 87 kW Rated current: 155 A Tension: 400 V Frequency: 50 Hz Hydraulic operating pressure: 289 bar Total amount of oil: 1500 l Type of oil: HLP 46, DIN 51524

YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone

pressure: 100 t throat: 260 mm stroke: 300 mm table-size: 500 x 500 mm ram head dimension: 650 x 500 mm dayligth: 700 mm oil volume: 600 l capacity of ejector in table: 40 t return capacity: 13 t total power requirement: 22 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 2.07 x 2.48 x 3.3 m - Ejector in the table, pressure 40 t, stroke 100 mm - Laterally movable work area protection with ESPE (light barrier) this with cycle operation - Cooling, behind the machine, backwater boiler (beige) air cooler (grey- blue), along with complete piping and control etc. - Press safe for unrestricted manual insertion operation - Documentation in german available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Type: Hydraulic Two-Column Press Manufacturer: HYDROMAK Model: P250T Year of construction: 1974 Condition: very good Offer Type: Used Machine Specifications: Compressive force: 250 t Projection: 620 mm passage Table: 610 x 610 mm Installation height: 385/515 mm Propulsion: 7.5 kW Remark: Two-handed and foot release Weight: 3200 kg The machine is in a very good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

pressure:400 t distance between columns:3250 mm distance table/ram, max. stroke up, adjustment up:1000 mm stroke:800 mm table surface area:3250 x 1400 mm table height over floor:1250 mm die cushion capacity:170 t die cushion stroke:200 mm die cushion area:1800 x 1000 mm distance between cutting impact cushioning:2610 mm side window:800 mm ram surface:3250 x 1400 mm return capacity:51 t speed down:300 mm/s speed up:300 mm/s working speed:16 - 33 mm/s quantity of oil:2900 l power requirement:100,0 kW weight:70,0 t Dimensions (WxDxH):4,9 x 3,1 x 7,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 cutting impact absorption:hydraulic

pressure:125 t distance between columns:2100 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table area:2230 x 1300 mm die cushion pressure in table:63 t die cushion stroke in table:60 mm surface of drawing cushion:1000 x 900 mm table height above floor:1050 mm side window:1000 mm ram surface:2100 x 1000 mm speed down:50 mm/s speed up:50 mm/s working speed:10 mm/s oil volume:410 l height above floor:5,95 mm power requirement:22,0 kW Weight:31,0 t Dimensions (WxDxH):3,1 x 1,7 x 5,95 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic foundation pit:not necessary

pressure:200 t distance between columns:1400 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:1300 x 1100 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:150 mm die cushion area:700 x 700 mm capacity of ejector in ram:10 t ejector stroke in ram:50 mm table height over floor:930 mm side window:770 mm ram surface:1300 x 1100 mm speed down:400 mm/s speed up:410 mm/s working speed:20 - 50 mm/s return capacity:30 t oil volume:1350 l power requirement:70,0 kW weight:23,0 t dimensions (WxDxH):4,5 x 3,0 x 3,5 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic ejector in ram:hydraulic foundation pit:not necessary

PRESS DESIGN   drive system: hydraulic   frame design: C-frame, single sided PRESS FORCES   total force (nominal): 12 to SLIDE   stroke: 200 mm ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 1000 kg

Hydraulic Connections Fittings in Original Packaging Best Quality Made in Germany, Italy Price: â?¬ 2,00 / kg

Description: Technical details: delivery pressure 280 bar, tank volume 100 l, total power requirement 3 kW, machine weight approx. 200 kg, additional information: Bosch Rexroth hydraulic pump, areas of application, industrial hydraulics, mobile hydraulics, process technology, vehicle construction weight approx.: 200 kg, Approx. Onsite Dimension. (l x w x h): 1,250 x 1,050 x 1,150 mm

Hydraulic unit incl. wiring diagram Manufacturer: Aros Hydraulik GmbH Type: HE160-Z21/V5, 5-VAD22/V5, 5-B3/120-LV6P-so. Engines: Manufacturer: Asea motor Type: MBT 132s Power: 5.5 kW Frequency: 3 ~ / 50 Hz Manufacturer: Dietz-motoren GmbH & co. KG Type: 4001540 441883 Power: 5.5 kW Voltage: 380 V Current strength: 11,8 A Valve block: Manufacturer: Lenze Type: 14 128 10 1 0 S 0 Pump: Manufacturer: Sauer / Daikin Type: J V15SA4CRX85 Maximum pressure: 250 bar Filter: Manufacturer: Argo filter Type: HD 046 056 Capacity: 35 l / min Pressure: 210 bar max. New price: approx. 7900

Internal gear pump Manufacturer of Bucher Hydraulics Type QT52-050/51-100 L 252-5 HPN 692337 PD 180/100 bar VG 050/100 cm³/rotation Nr 37381094 Used

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price

Filter device for hydraulic oil Oil pump, Oil filter, Brand: Hydraulic equipment Vertriebsgesellschagt mbH Other details: Please see photos All information without guarantee

Pump T&YC-014-1R00-B1-FP-46.0,18,5kW,60 l/min,Pmax 160 bar, Tank volume 30 liters

Hydraulic Pump available for sale. Make: Hydrostar Type: SPV9M Serial Number: 2903900/R PN: 12.5 Vgn: 147.6 Nn: 1450 Made in Poland

used , ready for use Hydraulic unit was feed of a planing machine 200 m/min Electric motor 37 kW Flow rate 105 l/min Operating pressure 420 bar Oil tank 60 litres

Manufacturer: Emac - Hydraulics Type: 50565 Manufacturing year: 1986 Overall dimensions: 900 x 600 x 1200 mm Working pressure: 150 bar Electric power: 15 kW

Manufacturer: Bachofen Hydraulik Type: HA26SL-L9,5/230+11,5/5-0LK-DS2-DFE2-M1-NU21-TW2-VB6 ($131756) Overall dimensions: 800 x 700 x 500 mm Operating pressure: 250 bar Oil capacity: 26 L

T6CC Series ; BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Model: T6CC 028 005 3R00 C500 , Code: 024-50550-5, Hydaulıc vane pump. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

T6CC 025 008 3R08 C500, CODE:024-26377-5, Hydraulıc vane pump. BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Model: T6ECM 066 B08 3R00 C1, Code: 024-45220-0, Hydraulıc vane pump BERGEN BRM, WARTSILA, DEUTZ KHD/MWM, MAN B&W, JENBACHER, ABC, PIELSTICK , GUASCOR, MAK, CATERPILLAR, VOLVO, WICHMANN, PUMPS, SACM, SEPERATOR, COMPRESSSOR, FILTER, PUMPS, VACUUM SAVAGE SYSTEM, HEAT EXCHANGER & COOLER. Spares are available and all kinds of spare parts can be given. Please contact us for your questions. EVE International AS E-Posta : info@eveinternational.com.tr Phone : +90 0216 519 2707 Fax : +90 0216 519 2720

Hydraulic pump ORSTA B 25 R ( B25R ) PT 11112 / 04

hydraulic power pack / lifting unit VEB MASCHIENEN- U. GERÄTEBAU BRANDENBURG for pallet truck 121 Brieletta Year: 1983 220 / 380 V Engine: 2,,2 kW IP54 with hydraulic cylinder ORSTA B1 - 50 x 70 / 0 W TGL 21551 load capacity 1000 kp Pn 16 Mpa hub: 700 mm length: 900 mm used, tested ! Dimensions: 540 x 470 x 990 mm

Hydraulic power unit ORSTA 52182 P: 12.5 Mpa (125 bar) Engine: 1.5 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 750 x 400 x 1000 mm

Hydraulic power unit ORSTA B.604.263 Discharge pressure: 63 kp/cm² (61.7 bar) Power: 2.2 kW 2 motors and 2 pumps used, tested ! Dimensions: 1350 x 600 x 980 mm

Hydraulic power unit ORSTA with gear pump C10-2R, TGL 10859 engine: 1.1 kW used, tested ! Dimensions: 750 x 500 x 930 mm

Hydraulic power unit, miniature power unit ORSTA 2.5/16 -0/0 P: 16 Mpa (160 bar) Engine: 1,1 KW 220 / 380 V Tank: 10 l on trolley ! used, tested ! Dimensions: 1000 x 450 x 910 mm

Hydraulic power pack with gate valve ORSTA pump: 16/16-1 TGL 10885 p: 16 Mpa (160 bar) V: 16 cm3/U Engine: 1,1,5 kW 940 rpm 220 / 380 V Tank: 75 l as a spare part for Hohenstein RBT400 ! used, tested ! Dimensions: 920 x 430 x 780 mm

Hydraulic power pack with tank ORSTA TGL 26215 ( TGL26215 ) 160 bar (16 MPa) engine: 2.2 kW 220 / 380 V Tank: 175 l spare part for milling machine AUERBACH FkrSRS 250 CNC-H 646 ! used, checked ! Dimensions: 1660 x 780 x 1400 mm

Hydraulic power unit, mobile, hydraulic cylinder tester ORSTA P: 200 bar Engine: MA 100 L ( MA100L ) 2,2,2 kW 220 / 380 V 3 AC Tank: SKD 40-630 ( SKD40-630 ) TGL 10892 Tank capacity: 40 l used, tested ! Dimensions: 850 x 560 x 1180 mm

Hydraulic power pack with double hydraulic pump and cooling pump ORSTA pump1: 12/20.2-230 Pump2: 6,3/20.0-260 TGL 37069 max. 200 bar (pump) Engine: 1.5 kW 1400 rpm 220 / 380 V Tank: 175 l Cooling pump: CET 3COA2-27 New ! Dimensions: 1350 x 650 x 1200 mm

Hydraulic power unit, hydraulic pressure generator WMW TGL 30-7306 63 - 160 kp/cm² ( approx. 62 - 157 bar ) engine: 0.8 kW 380 V 3 AC 50 Hz usable oil quantity: 8 l used, tested ! Dimensions: 560 x 430 x 420 mm

Hydraulic power pack with gate valve ORSTA pump: 10/16-1 TGL 10885 p: 16 Mpa (160 bar) V: 10 cm3/U Engine: MEZ 1AP100L-6 1,5 kW 935 rpm 220 / 380 V 3AC tank: approx. 75 l used, tested ! Dimensions: 920 x 430 x 930 mm

Hydraulic power pack with tank, universal power pack ORSTA 6.3/16 - 40.0/3-0 ( 6.3/16-40.0/3-0 ) TGL 10897 16 MPa ( 160 bar ) 6,3 dm3/min ( 6.3 l/min ) Engine: MEZ 1AP100L-4S 2,2 kW 1430 rpm 220 / 380 V 3AC Tank: approx. 40 l New ! Dimensions: 750 x 380 x 690 mm

Hydraulic power pack with tank, universal power pack ORSTA, SACHSENHYDRAULIK 56334/02 Hydraulic pump: PZL HYDRAL Type: 4/16.0-210 TGL 37069 16 MPa ( 160 bar ) 4,0 dm3/min ( 4.0 l/min ) Engine: ATB AF 90S/4A-11 1,1 kW 1400 rpm 220 / 380 V 3AC 50 Hz IP54 Tank: max. 42 l New ! with documents ! Dimensions: 760 x 450 x 1200 mm

Hydraulic power pack with tank, universal power pack HYDRAULIK-RING PVS12EH140C1 pd: max. 140 bar Vg: 12 dm3/min ( 12 l/min ) n: max. 1800 rpm Engine: SIEMENS ( without nameplate ) Tank: approx. 100 l spare part and a. for machining center HELLER BEA 05 DC used, tested ! Dimensions: 800 x 380 x 800 mm

Hydraulic power pack with tank, universal power unit IMAV HYDRAULIK GmbH AKD-26-250/4 HS 85467 p: approx. 150 bar Main engine: VEM KMER 132 M4 ACP 7,7,5 kW 1435 rpm 380 / 660 V 3AC 50 Hz auxiliary motor: VEM KMERB 80 G4 / 133 0,75 kW 1380 rpm 220 / 380 V 3AC 50 Hz tank: approx. 250 l used, tested ! Dimensions: 1300 x 750 x 1710 mm

Hydraulic power pack with tank, universal power pack HYDRAULIK-RING A091883 vane pump: PARKER PVS12EH140C2 pd: max. 140 bar Vg: 12 cm3/U n: max. 1800 rpm motor: DIETZ FDR 90L/4P 1,1,5 kW 1430 rpm 220 / 380 V 3AC 50 Hz tank: 63 l used, checked ! Dimensions: 800 x 380 x 800 mm

Hydraulic power unit ORSTA S4/63 P = 63 kp/cm² Q = 4 l/min engine: 0.75 KW 220 / 380 V Tank: 40 l used, tested ! Dimensions: 1000 x 700 x 580 mm

Hydraulic power unit with gate valve ORSTA Pump1: 10/16-1 TGL 10889 Pump2: C2,5-2 L TGL 10885 engine: 1,5 kW 935 rpm 220 / 380 V Tank: 80 l used, tested ! Dimensions: 920 x 520 x 1350 mm