hsk used for sale

Recording HSK F63 for WEEKE max. drive speed 10,000 rpm Gear ratio 1:1.48 max. output speed 15,000 rpm for collet ER 32

Edge height max. 65 mm Edge thickness max. 20 mm Strip cross-section max. 20 x 55 mm Fixed workpiece protrusion in post-processing incl. Edge material 38 mm (max. edge thickness 8 mm) In the case of strips or edge thickness > 8 mm, the output is in of post-processing 30 mm + strip thickness Post-processing is then only possible with the following units: possible: cross-cut and milling unit 08.055 and grinding unit Feed speed 6 - 30 m/min. Roller support rail extendable up to 700 mm Machine length 9,300 mm IMATRONIC 121/01 with system software for operating the Edge banding machine Compact PC in industrial design Electronic height adjustment of the upper pressure Inlet ruler axis-controlled Milling unit 08.376 with 2 motors of 4.5 kW each, in the Working in sync or counter rotation Infrared emitters for workpiece edge preheating Gluing unit 283.151 ...

Cutter mandrel, tool holder SECO, EPB E9306557104012 Tool holder: Ø 40 mm, length: 40 mm, wedge width: 10 mm Cantilever length ( A-dimension ): 180 mm mount: HSK - A100 New ! Dimensions (cutter mandrel): 280 x Ø 100 mm Dimensions ( packaging ): 330 x 110 x 110 mm

3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...

General: Year of construction: 2004 Travel: X 420 mm, Y 350 mm, Z: 200 mm Spindle speed 6,000 – 40,000 rpm Tool changer 16-fold Tool holder HSK-E25 Weight 5,800 kg Other equipment and included accessories: Blum automatic tool length measuring system Oil mist extraction Tool shrink machine Various tool holders

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: Sinumerik 840 D b-axis: 360 ° turning speeds: 16.000 U/min rapid traverse: 60 m/min tool taper: HSK 63 tool magazin:: 144 Plätze total power requirement: weight of the machine ca.: 17 t dimensions of the machine ca.: 7,4 x 3,35 x 3,7 m Pallet changing device: 180 ° NC rotary table Set-up station Full-space enclosure with workspace rinsing and manual rinsing gun Coolant system with IKZ Coolant pump 20-70 bar Coil suction filter 50mü Double chamber filter 60mü for internal coolant supply incl. prewarning Chip conveyor in scraper belt design Renishaw measuring system with probe Tool breakage control parallel to machining time (mech. probe) in tool magazine Incl. fixtures / clamping angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lock case milling unit 2 outputs Recording HSK F63 for WEEKE Max. drive speed 10,000 rpm Gear ratio 1:1.48 Max. output speed 15,000 rpm Lock case cutter holder for collet ER 32 Faceplate cutter holder for collet ER 16

Year of construction: 2006 Control Heidenhain iTNC 530 Speed [rpm] 18000 Travel X/Y/Z [mm] 1150/710/710 Tool Aufn. HSK63 Spindle: Motor spindle technology Speed 18,000 rpm Power: 28 kW Torque 121 Nm Tool holder HSK-A63 NC swivel head: B-axis 0.001° Swivel range -120°/+30° NC rotary table: C-axis 0.001° Clamping surface ø800 mm General: Tool magazine 2x 16 stations Rapid traverse in X/Y/Z 30 m/min Rigid table clamping surface 1,500 x 795 mm Table load (max.) 800 kg Equipment/accessories: Displacement measuring system directly in X/Y/Z (glass scales) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure, 40 bar Workpiece Measurement Preparation Infrared Probe, m&h Tool breakage control Brankamp Oil mist extraction Electrostatic separator Set-up operation mode 4 Other accessories: various tool holders, ...

Various turning tools Kennametal, Widia and others Prices on request. Complete package or individually. Other items available on request. A total of 13 lattice box tools through company liquidation. All new and unused. Estimated about 10 tons of mass. Mainly Kennametal, Widia, as well as HSK mounts (approx. 300) and various milling heads (approx. 300).

x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm Tool changer: 30 Feed: 20-15000 mm/min Rapid movement: 40000 mm/min spindle taper: HSK 63 Cooling through the spindle: 17 bar spindle turning speed range: 12000 U/min rotary table dia.: 800 mm : CNC milling-head swivable +/-: CNC Control: Heidenhain total power requirement: kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3100 mm, 2205 mm, 170 mm

BIESSE ROVER K FT machining center Manufacturer: BIESSE Model: ROVER K FT Year of production 2017 Additional information: Electrospindle: 1 pc. Main engine: 9 kW Tool magazine: 14 positions Vertical drills: 10 pcs. Machine table: raster Software: BIESSE B_SOLID Number of revolutions: max. 24,000 rpm Handles: HSK-F63 The machine is in very good technical condition. You can see it at work. If you are interested, I will send you the price, additional technical data and photos.

Key data: 1050 mm, 800 mm, 550 mm

Machine Details Stock-No. 1105-03912 Type of machine milling machining centers - vertical Make DMG Type DMC 105 V Linear Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis free on truck Price Technical details travel -x axis 1050 mm Travel -y axis 800 mm Travel -Z AXIS 560 mm control Heidenhain ITNC 530 turning speed range - power take off spindle 18000 rpm Additional information 3 axis - DMG DMC 105 V Linear - Chip conveyor - -30-position pick-up changer with round magazine 18000 RPM HSK 63 BUTTON

Code: 0094 Brand: SCM Model: RECORD 110/S - CE Standard CNC working centre for doors, windows, furniture, arches and various - CE Standard - Year 2006 Technical data: X axis stroke mm 2990 - Speed 60 M/S Y axis stroke mm 1720 - Speed 45 M/S Z axis stroke mm 400 - Speed 25 M/S Working range X mm 3500 Working range Y mm 1815 Workpiece passage mm 155 Electrospindle Kw 7,5 18000 rpm Tool attachment HSK 63 Automatic tool changer with 12-position "RAPID 12" UNIVERSAL K2 power unit fixed for horizontal working Bar table with suction cups : N° 6 TV tables with displays N° 2 workpiece loading aid lifters Vacuum pump 250 m³/h (5,5 Kw) Conveyor on electrospindle to eliminate chipboards and dust XYLOG operator interface CNC managed by PC with WINDOWS interface Suction N° 2 mouths diameter mm 150 Compressed air 7/8 bar Machine overall dimensions: Length mm 3710 - Widt ...

Machining center Mikron VCP 1350 :::SPECIFICATIONS::: CNC Model: Heidenhain - CNC version: TNC 426 - Tool connection: HSK 63 - Spindle power: 27Kw Number of spindle revolutions: 24000 - Number of tools: 46 - X Axis Stroke: 1350mm - Y Axis Stroke: 900mm - Z Axis Stroke: 750mm Rapid feed linear axes X Y Z: 30m/min Guides: roller Tilting rotary table: yes Round table type: continuous Table size: 800mm Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 4130mm Width: 3680mm Height: 3150mm Weight: 10100Kg

Key data: 1300 mm, 600 mm, 700 mm

Matec 30 L, Year of construction 2010, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,

Key data: 1300 mm, 600 mm, 700 mm

Matec 30 L, Year of construction 2011, Control Heidenhain iTNC 530, travel X/Y/Z1300/600/700 mm, spindle speed up to 12,000 rpm, Recording HSK 63 - A, Elketr. Handwheel IKZ 20 bar, paper tape filters, Ww 80 fold, Full cladding working chamber, you. Measuring systems, Conveyor bellows with steel slats, 3D probes, Laser measuring device,

x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Control: Sinumerik 840D weight of the machine ca.: 12 t 1 horizontal machining centre Make: HECKERT type: CWK 400D year 2001 serial no. 18445, control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 650 x 650 x 650 mm 2-fold pallet changer pallet size 400 x 400 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 57,806 Spindle hours 1.970 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, preparation for infrared probe, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 600 mm z-travel: 805 mm Control: Sinumerik 840D weight of the machine ca.: 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 500 mm, 250 mm, 400 mm

Machine Details Stock-No. 1105-03925 Type of machine milling machining centers - universal Make AKIRA SEIKI Type RMV 250 RT 5 AXIS Year of manufacture 2014 Type of control CNC Storage location FRANCE Country of origin Taiwan Delivery time immediately Freight basis ex stock Dreieich Technical details X-Travel 500 mm Y-Travel 250 mm Z-Travel 400 mm table-size ROUND TABLE 250 mm spindle taper ISO HSK 63 spindle turning speed range 45 - 12000 rpm spindle drive motor 11 kW tool change unit 24 CNC-control FANUC OIMD voltage 380 V max. table load 200 kg Throat 380 mm total power requirement 17 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 3.5x 2.5x 2.60 m Additional information AKIRA SEIKI TYPE RMV 250 RT FROM YEAR 2014 - coolant equipment TROUGHT THE SPINDLE 20 BARS CGIP CO? VOYER 5 AXIS MACHINE IN GOOD CONDITION

Vertical machining center Chiron FZ08W :::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 21M Tool connection: HSK 32 Spindle power: 3,7Kw Number of spindle revolutions: 15000 Number of tools: 12 X Axis Stroke: 300mm Y Axis Stroke: 250mm Z Axis Stroke: 250mm Rapid feeds linear axes X Y Z: 40 40 60m/min Guides: roller Pallet change: yes Pallet size: 550 x 300mm Maximum load allowed: 200Kg Rotopallet: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 2600mm Width: 1400mm Height: 2100mm Weight: 2200Kg

max. wheel diameter: 2800 mm gear width: - mm max. module: 20/30 min. module: Control: Siemens 840 D total power requirement: 40 kW weight of the machine ca.: 50 t dimensions of the machine ca.: 7 x 4,5 x 4,75 m The machine has only a few working hours and is like new. The machine is under power and may be inspected by prior arrangement. CNC control Siemens 840 D Nominal workpiece diameter: 2800 mm Table diameter: 2500 mm Pitch wheel diameter: 2,200 mm Table bore diameter: 800 mm Table bore depth: 875 mm Machine nominal module Hobbing aprrox. 20 mm gear Milling approx.: 30 mm Smallest/largest distance between milling cutter and workpiece axis: 600/1,735 mm Largest axial slide path – special design: 1,000 mm Largest champable hob diameter: 350 mm Largest champable hob length: 375 mm Swivel range of the milling head: + 30/- 45o cutter arbor cone: HSK-B160 (hollow shank taper according t ...

Ref. -No.: 10357 Manufacturer: STARRAG HECKERT Year of construction: 2007 Type of control: CNC Steuerung Control: Sinumerik 840D Country of origin: Schweiz X-Travel: 1200 mm Y-Travel: 950 mm Z-Travel: 1200 mm Work spindle drive power (25% ED): 67 kW Work spindle torque (25% ED): 1508 Nm Tool Taper: HSK-A100 Workpiece interference circle diameter: 1250 mm Tool Piece Magazine With: 80 Pcs./pcs. Tool changer: Werkzeugkettenmagazin Max. Workpiece height: 1200 mm Feed Speeds X/Y/Z Axis: 60000 mm / min Feed Capacities X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 RPM Numbers Of Pallets: 2 Max pallet load: 1500 kg Size Of Pallet: 800 x 630 mm pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Weight Of The Machine Ca.: 25 t

Ref. -No.: 10342 Manufacturer: STARRAG HECKERT Year of construction: 2015 Type of control: CNC Control: Fanuc Series 16i Storage location: Halberstadt Country of origin: Schweiz Serial no.: 12217 X-Travel: 1000 mm Y-Travel: 910 mm Z-Travel: 835 mm Distance spindle center - table: 100 mm Table Dimensions (Lengthxwidth): 630 x 800 mm Table Load: 1250 kg Max. Tool Length: 600 mm Max. Tool Diameter: 500 mm Tool Taper: HSK-A 100 Numbers Of Tools In Magazin: 240 Spindle Speed: 20 - 6000 RPM Feed Capacities X/Y/Z: 20.000 N Rapid Traverse: 40 m / min Internal cooling: 30/40/50 bar External cooling: 2 bar

Ref. -No.: 10339 Manufacturer: AGIE CHARMILLES Year of construction: 2008 Type of control: CNC Control: Heidenhain iTNC 530 (2P) Storage location: Halberstadt Country of origin: Schweiz serial number: 107.20.00.040 X-Travel: 650 mm Y-Travel: 600 mm Z-Travel: 500 mm Main spindle drive power: 30/39 kW Main spindle speed range: 20.000 RPM Table Dimensions (Lengthxwidth): 800 x 600 mm Table Load: 500 kg Max. Workpiece Weight: 6,5 kg Tool change time (chip-to-chip): 7 s Max. Tool Length: 300 mm Max. Tool Diameter: 130 mm Tool change time: 1,5 s Workpiece Diameter At Full Load: 80 mm Workpiece Diameter With 2 Vacant Positions: 130 mm T - groove width: 14 mm T - slot spacing: 63 mm Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 60 Tool changer: CT-60 Feed Speeds X/Y/Z Axis: 40/40/30 mm / min Feed Capacities X/Y/Z: 4/4/6 N Further information: Laser tool measuring system Type = BLUM laser syst ...

Ref. -No.: 10335 Manufacturer: HÜLLER HILLE Year of construction: 2008 Type of control: CNC Control: Sinumerik 840D pl Storage location: Halberstadt Country of origin: Germany X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 800 mm B-Axis: 360 ° Machine length: 9500 mm Machine width: 4500 mm Machine Height: 3500 mm Distance spindle center - table: 150 mm Table Dimensions (Lengthxwidth): 500 x 630 mm Table Load: 800 kg Max. Workpiece Weight: 40 kg Max. Tool Length: 650 mm Max. Tool Diameter: 325 mm Workpiece Diameter At Full Load: 100 mm Tool Taper: HSK - 100 Spindle Speed: 0 - 12000 RPM Rapid Traverse: 60 m / min Further information: Coolant system = 1250 l

Manufacturer: Homag, Type: Profi BAZ/20/40/14/3/KA, Year: 2003, Control: Woodwop, Maschinensteuerung: Homag, Programming station office: möglich, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5200, Min.-max. workpiece height in mm: 10-60, C axis: yes, Number of milling spindles vertical: 2, Anzahl Frässpindeln horizontal: no, Milling engine 1 hours power: ca.12, U/min 1) Vertikal: 1500-24000, Milling engine 2 hours power: ca.12, U/min 2) Vertikal: 1500-24000, Number of tool changers: 2 (1 defekt), Tellerwechseler: yes, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: Rollentransport, Traverse table: yes, Stops in the table front: yes, Automatische Beladung: yes, Automatschische Entladung : yes, Vacuum pumps m³/h: 100, Tool clamping system: HSK 63, Saw unit: yes, Radial arm machine: yes, Laser positioning: no, incl. to ...

Manufacturer: Homag, Type: BAZ 20/50/16/V/KA, Year: 2000, Control: NC-83, Software: Woodwop, Barcode: möglich, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 250, C axis: yes, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, rpm 1): 1500-18000, Number of tool changers: 1, Kettenwechsler: yes, Number of tools per tool-magazine: 70, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Number of tables: 8 Traversen, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 140, Saw unit: yes, Edgebanding unit: 360 Grad, Edgeband hight mm: 10-60, Magazine Qty: 6-fach, Radial arm machine: yes, incl. tools: yes, machine ready for demonstration: yes, Automatic setting up table: yes, CE-Sig ...

Manufacturer: HOMAG Optimat , Type: BOF 32/30/K, Year: 1999, Control: Homatic, Maschinensteuerung: 80, Programming station office: 3600, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 1, Throuh running machine: 2, Feeding speed max m/min: HSK 63, Working range X: 12, Working range Y-axis: 24000, Working range Z: 12, Working range Y-axis: 24000, B-axis: 2, Pendulum processing: 12, Tool adaption system: 2 X 12, Milling engine 1 hours power: 2 X 7, U/min 1) Vertikal: 2 X 6, Milling engine 2 hours power: 2 X 6, Frässpindel horizontal 1 kW: 4, U/min 1) Horizontal: yes, Bohrergetriebe Horizontal: 2 X 120 , Kettenwechsler: no, Working widht max mm: yes, Max. working depth in mm: inkl Werkzeuge und Zubehör, Year :1999

Manufacturer: Biesse, Type: Rover A 1532, Year: 2019, Control: NC BH660, Software: Telesrvice, Working range X: 3140, Working range Y-axis: 1560, Working range Z: 200, C axis: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 13,2, rpm 1): 1000-24000, Tellerwechseler: 8, Pickup Wechlser: 16, Vertical drills-X: 17, Drill vertical Y: 11+6, Horizontal drills-X: 5, Drill horizontal Y: 3, Traverse table: 6, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Year :2019

Manufacturer: IMA H 610 Tandem, Type: BIMA 610/2H/875, Year: 1997, Software: IMAWOOP, Working range X: 5.700, Working range Y-axis: 1.900, Working range Z: 440, C axis: yes, Programming station office: möglich, Work piece width min-max mm: 150 - 1.200, Min.-max. workpiece length in mm: 250 - 5200, Min.-max. workpiece height in mm: 10 - 120, Pendulum processing: yes, Number of milling spindles: 2, Tool adaption system: HSK 63F, Milling engine 1 hours power: 7,5, rpm 1): 1.500 - 18.000, Milling engine 2 hours power: 7,5, rpm 2): 1.500 - 18.000, Vertical drills-X: 2 x 7, Drill vertical Y: 2 x 12, Traverse table: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 200, Saw unit: yes, Edgebanding unit: no, Radial arm machine: yes, Year :1997

Manufacturer: Homag Doppelspindelfräse 4 Achsmaschine, Type: BMG 512, Control: Woodwoop 6.0, Min.-max. workpiece length in mm: 4500, Min.-max. workpiece height in mm: 1600, Aluminium processing: 300, Throuh running machine: yes, Feeding speed max m/min: yes, C axis: 2, B-axis: HSK 63, Pendulum processing: ca.12, Work piece width min-max mm: 1800-24000, Min.-max. workpiece length in mm: ca.12, Horizontal: 1, Number of milling spindles vertical: 14, rpm 1): 9, Milling engine 2 hours power: 6, rpm 2): 2, Number of tool changers: 2, Kettenwechsler: yes, Pickup Wechlser: yes, Working widht max mm: 6, Horizontal drills-X: yes, Belt conveyor: yes, Number of tables: yes, Traverse table: 120, Aluminium sleeking table: Automatisch, roller table: 16, 2 station allocation: yes, Stops in the table rear: yes, Drill vertical: yes, Edgeband hight mm: yes, Magazine Qty: no, Schnittstelle DXF: ink.Werkze ...

Manufacturer: Homag BAZ , Type: 211 Venture 22 L, Year: 2006, Control: Woodwop/Powercontrol PC 85, Software: Softwarepaket AV, Work piece width min-max mm: 4400 X 1550, Feeding speed max m/min: X= 80/Y=80/Z=30, C axis: yes/Schnittstelle Flex 5, Pendulum processing: yes, Work piece width min-max mm: 4400 X 1550, Number of milling spindles: 1, Number of milling spindles vertical: 1, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 12, rpm 1): 1500-24000, Number of tool changers: 1, Tellerwechseler: 1, Pickup Wechlser: Verleimteil/Easy Edge, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 1, Drill horizontal Y: 2, Traverse table: 8 Traversen, 2 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 60, LED-R ...

Manufacturer: Biesse, Type: Rover C6.50 Edge, Year: 2011, Control: Biesse, Software: Works, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Working range X: 5.255, Working range Y-axis: 1.963, Working range Z: 350, Pendulum processing: yes, Work piece width min-max mm: 1.535, Min.-max. workpiece length in mm: 4.600, Min.-max. workpiece height in mm: 225, Number of milling spindles: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, Kettenwechsler: 22, Vertical drills-X: 12, Drill vertical Y: 17, Horizontal drills-X: 4, Drill horizontal Y: 2, 2 station allocation: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 9 - 54, Radial arm machine: yes, Waste conveyor belt: yes, Zentralschnierung: yes, Year :2011

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995

Manufacturer: Homag, Type: 4-00570, Tool diameter mm: ca.160, Used: yes, HSK 63: yes, Angle saw: yes, FREE TEXT: Aggregat ohne Hauben mit Tastschuh/ 9000 U/min,

Manufacturer: Weeke, Type: BHC 600 Profiline, Year: 2003, Control: Weeke, Working range X: 9.000, Working range Y-axis: 1.790, Working range Z: 370, C axis: yes, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 7.250, Min.-max. workpiece height in mm: 100, Feeding speed max m/min: 80, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 2, Tellerwechseler: 2, Number of tools per tool-magazine: 8 + 18, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 3, Drill horizontal Y: 3, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Laser positioning: yes, Year :2003

Manufacturer: Biesse, Type: Rover 6.50 5-Achsmaschine conf.2, Year: 2006, Software: Editor 2.2.1.273, Working range X: 4600, Working range Y-axis: 1535, Working range Z: 230, C axis: yes, B-axis: yes, Programming station office: möglich, Number of milling spindles: 1, Milling engine 1 hours power: 12, rpm 1): 1500-2400, Kettenwechsler: yes, Number of tools per tool-magazine: 14, Mitfahrender Werkzeugwechsler: yes, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 120, Rigging support table: yes, Tool clamping system: HSK-63 F, Saw unit: yes, Radial arm machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, machine ready for demonstration: yes, Zentralschnierung: yes, Presentation possible: yes, Year :2006

Manufacturer: Reichenbacher, Year: 2011, Control: Siemens Sinumerik 840 D Solution Line mit NCU 720.2, Software: Frame-Concept, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Min.-max. workpiece height in mm: 10-120, Work piece width min-max mm: 300-1500, Min.-max. workpiece length in mm: 2 X 2200 oder 1 X 4000 X 1600, Number of milling spindles: 2 X 5 Achs, Tool adaption system: HSK 63, Milling engine 1 hours power: 18, rpm 1): 1000-24000, Kettenwechsler: yes, Number of tables: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: yes, Vacuum pumps m³/h: 250, Portal machine: yes, Automatic setting up table: yes, Charging system double-sided: Roboter, Destacking unit: mit Lagerplätzen, Automatic charging: Roboter auf Fahrportal, Presentation possible: yes, FREE TEXT: Bohr undBänder Eindrehstation, Year ...

Manufacturer: Biesse 5 Achsmaschine, Type: Arrow FT-5 Achsmaschine, Year: 2007, Control: XP 600, Working range X: 2 X 1600 , Working range Y-axis: 2600, Working range Z: 300, C axis: yes, B-axis: yes, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): ca. 24000, Number of tools per tool-magazine: 10, Vertical drills-X: 18, Horizontal drills-X: 3, Number of tables: 2, raster table: yes, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 2 X 250, Drill vertical: 3, Saw unit: 120 mm, Portal machine: yes, Werkstückspannsystem: Vakuum, Schnittstelle DXF: yes, Zentralschnierung: yes, Available: sofort, FREE TEXT: Wassergekühlte Spindel, Year :2007

Manufacturer: HomagTürenfertigung mit mit Verleimteil und KUKA Roboter, Type: BOF / BAZ20/50/18/2/D, Year: 2002, Control: Homatic PC 83, Software: Woodwop, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Working range X: 5800, Working range Y-axis: 1600, Working range Z: 160, C axis: 2, Work piece width min-max mm: 1600, Min.-max. workpiece length in mm: 800 - 3500, Min.-max. workpiece height in mm: 12 - 60/120, Number of milling spindles vertical: 2, Tool adaption system: HSK F63, Milling engine 1 hours power: 14,5, rpm 1): 1500 - 18.000, Milling engine 2 hours power: 14,5, rpm 2): 1500 - 18.000, Kettenwechsler: 70, Pickup Wechlser: 6, Number of tools per tool-magazine: 6 + 70+ 20, Mitfahrender Werkzeugwechsler: yes, Belt conveyor: yes, 2 station allocation: yes, Vacuum pumps m³/h: 2 x 66, Rigging supp ...

Manufacturer: Biesse Rover A, Type: Rover A, Year: 2008, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 145-3685, Min.-max. workpiece height in mm: 6-80, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 12, U/min 1): 1500-24000, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 7, Drill vertical Y: 8, Horizontal drills-X: 4, Drill horizontal Y: 2, raster table: yes, 2 Platzbelegung: yes, Anschläge im Tisch vorne: yes, Vacuum pumps m³/h: 250, Tool clamping system: HSK F 63, Drill vertical: 15, Saw unit: yes, Year :2008

Manufacturer: Sägeaggregat, Type: für CNC, Werkzeugdurchmesser mm: 180, Bohrung mm: 30, Zustand: gut, HSK 63: yes, pm: 6000,

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

Manufacturer: Homag, Type: KL 10/21/QA, Year: 1999, Program: Homatic, Control: PC 21, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 50, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 65, Min-max feed m/min: 10-30, Axis control: yes, Infeed table: no, Einlauflineal gesteuert: yes, Premilling: yes, Application of separation agent: yes, IR zone: yes, Strip magazin: no, Mitre stations: yes, Pre-milling: yes, Radius milling axis adjustment: yes, Corner tracing type: FK 13, 2 Motoren: 2, Magazin : 2 X 12, with tool holders: HSK, Grooves, slewable-controlled: Freiplatz, Radius scraper: yes, Scraper with axis adjustment: yes, Flat scraper: yes, Corner trace buffing: no, Corner trace buffing: no, Bonding part EVA: 2 Stück, Number of tools per tool-magazine: 2 X 8, Buffing unit: yes, Roller/belt: Riemen, Freiplätze:  ...

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

Manufacturer: IMA, Type: Bima 600, Year: 1993, Control: NUM 760, Working range X: 3000, Working range Y-axis: 1200, Working range Z: 250, C axis: no, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 5, Stops in the table rear: yes, Number of tables: 1, Traverse table: yes(Rolle), Vacuum pumps Qty: 2 X 80, Tool clamping system: vakuum, Year :1993

Manufacturer: Homag , Type: Genius 20/50/16/V/G, Year: 1998, Control: Homatic, Feeding speed max m/min: 80, Working range X: 5600, Working range Y-axis: 1600, Working range Z: 60/120, C axis: yes, B-axis: no, Tool adaption system: HSK F 63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 5, Drill vertical Y: 5, raster table: Glattisch, 2 station allocation: yes, 4 station allocation: yes, Stops in the table front: 14, Stops in the table rear: 3, Vacuum pumps m³/h: 66 + 100, Saw unit: yes, Edgebanding unit: yes, Edgeband hight mm: 40, Marking laser: yes, Year :1998

Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999

Manufacturer: Homag, Type: 20/30/12/G, Year: 1994, Control: Homatic NC 81/Woodwop, Work piece width min-max mm: 130-1200, Min.-max. workpiece length in mm: 250-3000, Min.-max. workpiece height in mm: 40, C axis: yes, Work piece width min-max mm: 130-1200, Min.-max. workpiece length in mm: 250-3000, Min.-max. workpiece height in mm: 40, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 10, Drill vertical Y: 5, Saw unit: yes, Radial arm machine: yes, inkl.Werkzeuge: yes, Year :1994

Manufacturer: Homag, Type: Genius 20/50/14/G, Year: 1996, Control: Homatic, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5300, Min.-max. workpiece height in mm: 40 / 60, C axis: yes, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): 1500 - 18.000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 11, raster table: yes, 2 station allocation: yes, Saw unit: yes, Edgebanding unit: yes, Magazine for edges: 1-fach, Edgeband hight mm: 40, Marking laser: yes, Year :1996