hsk used for sale

HSK - Guillotine shears with motor drive: - Engine: Dietz 380-3-50, 2.2 kW - D. Stroke rate 100 p.min - Weight approx. 700 kg - Drive via brake motor - Cutting triggering via movable foot switch - Scissor table with support table widened to approx. 600 mm - Side stop TA 500 with scale - Rear width stop ZA 500 in foldable design - Manual adjustable. For long sheets, stops can be placed upwards. - Fully installed and ready to use Additional: Pneum. Hold

Tool holder, tool holder, milling holder, milling tool -Milling holder: HSK 63 holder, 7 pieces -Type: different versions see photos -Price/tax: complete -Transport dimensions. 470/100/H95mm -Weight: 8.8 kg

Shrink chuck, Shrink chuck KENNAMETAL HSK A100x25x115 HSK100ATT25115M Tool: Ø 25 mm Cantilever length ( A-dimension ): 115 mm Mounting: HSK - A100 New ! Dimensions ( shrink chuck ): 165 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 175 mm

Tool holder KENNAMETAL TH1533413 / HSK100-A Lk-Nr.: 102642147 Tool: Ø 10 mm / 2x 60° indexable plate Cantilever length ( A-dimension ): 162 mm Mount: HSK - A100 New Dimensions ( tool holder ): 215 x Ø 100 mm Dimensions ( packaging ): 130 x 105 x 225 mm

Plug coupling, compressed air safety coupling, 2 pieces BILZ HSK 2 ( HSK2 ) Material: steel nominal diameter: 10 mm width across flats: 36 mm external thread (AG): 1/2 inch ( cylindrical Whitworth pipe thread ), length: 12 mm New ! dimensions ( single coupling ): 82 x 44 x 44 mm

Tool carrier trolley, CNC transport trolley LISTA HSK-A63 48 seats on one floor work surface: 600 x 470 mm working height: 790 mm side work surface: 495 x 305 mm working height: 910 mm lower work surface: 600 x 470 mm working height: 230 mm wheeled, 2 fixed wheels, 2 steerable wheels with parking brake used, tested ! dimensions: 1090 x 520 x 940 mm

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Workshop trolley: stable tool trolley -4 drawers: lockable, see photos for layout -Contents: 25 tool carriers HSK A63/B80 -Total dimensions: 885/555/H995 mm -Weight: 101kg

Description: Gühring HSK 50 tool holders, approx. 58 pcs. Approx. Onsite Dimension. (l x w x h): 600 x 400 x 450 mm, weight approx.: 50 kg

Description: 6 tool holders, brand Freutek, type HSK-63F-ER40, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Description: 6 tool holders, brand Freutek, type HSK-63F-ER40, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Clamping set OTT - JAKOB HSK A100 / B125 95.103.636.5.1 ( 9510363651 ) 182714/1 Thread: M16 x 1.5 New! Dimensions ( clamping set ): 138 x 53 x 53 mm Dimensions ( packaging ): 145 x 80 x 72 mm

Description: 6 tool holders, brand Freutek, type HSK-63F-ER40, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Description: 42 pieces Toolhodler HSK 63 from different manufacturers misc. Interfaces like Shrink fit, collet and Weldon Transportdimensions: 1.200 x 800 x 400 mm, ca. 90 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 70 kg

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 2000 M-No.: 4-02078 000W04206041 Nmax: 9,900 rpm

Homag saw unit Brand: Homag Type: 000W04206041 Year of construction: 1998 SKU:4-060-24-0165 2.056.10.3021 Saw blade: ø180 mm Nmax: 10,000 rpm

Tool carrier, receptacle for milling mandrels, 5 pieces goblet TUL-SYSTEM HSK63 plastic Dimensions( one tool carrier): 240 x 140 x 130 mm used, tested ! Dimensions: 620 x 240 x 130 mm

Tool carrier trolley, CNC transport trolley KELCH TUL-SYSTEM HSK63 96 seats on two floors < br /> Floor 1: Working height: 330 mm, 48 seats Floor 2: Working height: 830 mm, 48 seats per floor 16 plastic tool carriers ( 240 x 140 x 130 mm ) 3 seats each per tool carrier mobile, 2 fixed wheels, 2 steerable wheels with parking brake with cover used, tested ! Dimensions: 1160 x 550 x 1180 mm

Sealing plugs, 6 pieces GÜHRING GM300 4985 63.000 16136705 type of adapter, machine side: HSK63-C used, tested ! Dimensions ( plug ): 65 x 65 x 45 mm Dimensions (packaging): 235 x 150 x 125 mm

Tool holder, tool magazine, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg

Tool magazine, tool holder, tool holder, milling holder, milling tool -1 recording: HSK80 -for tool changers -Shrink chuck collet flat chuck reducing sleeves cutter head shell end mill -Weight: 2 kg

Description: Consisting of 8 pieces Partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 300 x 160 x 200 mm, weight approx.: 20 kg

Description: Consisting of 8 pieces Approx. Onsite Dimension. (l x w x h): 400 x 300 x 50 mm, weight approx.: 20 kg

Description: Consisting of 16 pieces Partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 400 x 300 x 70 mm, weight approx.: 50 kg

Description: Consisting of approx. 40 pieces Partly equipped with cutting tools Approx. Onsite Dimension. (l x w x h): 800 x 600 x 70 mm, weight approx.: 70 kg

Description: In various sizes and designs Mainly from the manufacturer SCHUNK and WALTER Consisting of approx. 43 pieces Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 100 kg

Description: Consisting of approx. 20 holders Partly equipped with cutterheads and other non-mounted cutterheads from the manufacturer AVANTEC Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 150 kg

Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Description: 6 tool holders, brand Freutek type HSK63F ER32-80, balanced, up to 25,000 rpm, new packaged, lubricated in sealed bag and single pack. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 500 x 100 x 100 mm, weight approx.: 8 kg

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Description: Professional cone remover for BT-40/HSK63F, allows the disassembly of the cones with precision without damaging the surface and balancing of the cone and tool. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 210 x 120 x 120 mm, weight approx.: 2 kg

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, adapter tool presetting device -Milling holders: Adapter for tool presetting device 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Levy/Price: complete -Total dimensions: 500/300/H170 mm -Weight: 34.4 kg

Package HKS63 Tool Mounts composed of 1 piece Holex HSK 63-M8x101 for screw-in milling cutter 1 piece Holex HSK 63-M12x101 for screw-in milling cutters 1 piece Holex HSK 63-M12-126 for screw-in milling cutters 1 piece HSK 63-M12-132 for screw-in milling cutter 2 pieces Garant HSK-A63-4-80 shrink chuck 1 piece Garant HSK-A63-8-50 for screw-in milling cutter 5 Garant HSK 63 M8-101 for screw-in milling cutters 1 piece Hoffmann HSK-A63-8-65 for Weldon 1 piece Hoffmann HSK-A63-16-80 for Weldon 1 piece Goblet HSK 63x6x65 for Weldon 1 piece Goblet HSK 63x10x65 for Weldon 1 piece Goblet HSK 63x12x80 for Weldon 4 pieces WNT 84 754 622 transverse groove cutter mandrel

Concentricity test mandrel / HSK-A 100 / Art.-No. 4971 / Design: HSK-A shank with 4 equal depth grooves 90° similar to ISO 12164-1/ DIN 69893 • for checking the concentricity of machine spindles Mounting type, machine side HSK-A Variety 4971 Code-No. 300.100 Weight 6.6 kg Total length 399 mm Ø-Outer 100 mm Shaft length 50 mm Holder, machine side HSK-A 100 Length cantilever: 349 mm Body Ø 40 mm Width 29 mm

max. tool diameter: 400 mm : 310 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in  ...

Work spindle, drill spindle, Tool spindle, HSK 40, AD68mm, Mapal, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 40, incl. flinger ring and cover ring, - Length bearing body 129 x D 68mm, 5 roller bearings AD 68 mm, - Incl. Rotex coupling with gear rim drive side for shaft D25 mm, - Overall dimensions: 270 mm x D 68 mm, 5kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we wi ...

Work spindle, drill spindle, Tool spindle, HSK 50, AD80mm, Mapal, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was purchased from a spare parts warehouse of a company, was there for a long time in stock but never in operation and is in a completely mint condition. Work spindle, drilling spindle, tool spindle from Mapal, - tool holder HSK 50, incl. flinger ring and cover ring, - Length bearing body 149 x D 80mm, 5 roller bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm, - Overall dimensions: 305mm x D 80mm, 8kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Howev ...

Working spindle, drilling spindle, tool spindle, HSK 63, AD80mm, Mapal, as good as new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece there is still a great discount. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has been in stock there for some time but has never been in operation and is completely new Working spindle, drilling spindle, tool spindle from Mapal, - Tool holder HSK 63, incl. centrifugal ring and cover ring - Length of bearing body 149 x D 80mm, 5 rolling bearings AD 80mm, - Incl. Rotex coupling with gear rim drive side for shaft D35mm - Overall dimensions: 305mm x D 80mm, 8kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and w ...

High-performance milling spindle, unused                high speed milling spindle, unused   Machine model: MFWS 1709/24/72 VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                                         FS 40-10-30-4- AOW                                                                                B 812LD 9913 - 319416 spindle speed/ infinitely variable: 150... 5300 rpm taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

High-performance milling spindle, unused                high speed milling spindle, unused  high speed milling spindle, unused/new   Machine model: MFWS 1709/24/47/VC HSK-A 63 Fabr.: Arnold Müller GmbH Kirchheim                                                            FS 40-10-30-4- AOW                                                                  B 812LD 1551 - 230 30 84 Speeds/ spindle speed/ infinitely variable: 150... 5300 rpm Wz recording /taper in spindle: SK 40        Power 16 kW Torque: 30 Nm 

Composite systems Bitzer with original capacitors Deep pond / Normal cooling -3x compressor Bitzer HSK 7471-90 -KaeltePower: 435 kW at -10ºC/40ºC R404A 280 kW at -20ºC/40ºC R404A -Volume: 3 x 250 m3/h -Quantity in stock: 1 -With original capacitors -In very good condition Price on request, We have many other cold machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

conus taper: HSK 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

conus taper: HSK 100 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bitzer compressor unit Type: 3 x HSK 8571-140-40P Volume: 3 x 410 m3 Cooling capacity for R404A: 860 kW at -5°C/40°C, 705 kW at -10°C/40°C Cooling capacity for R134A: 540 kW at -5°C/40°C, 440 kW at -10°C/40°C Dimensions: 4100 x 1400 x 2500 mm Reference number: Z25 Pieces in stock: 1 Condition: Used