hsk used for sale

5 axis machininng center (milling/turning from bar), Under power in our warehouse, MAKE CHIRON, MODEL MILL 800 5 axis, CNC Fanuc 18iMBS (5 simoultaneous axis 1), X, Y, Z (mm) 800 – 500 - 550, Rapids (Highspeed) 60 m/min, Swivelling head CNC controlled (B axis) +/- 100°, Turning spindle Peiseler, Milling spindle 12.000 giri / 140 Nm (v nota 2), Tools 65, Tool type HSK-A 63 DIN 69893, Tool-change time 1,5 sec (v nota 3), Table 1400x500, Max table load 1200 kgs, Coolant through spindle 70 bar (see note 4), CNC controlled clamping/rotating unit for 6th face machining (v. nota 5), Pressurised linear encoders, Swarf conveyor, Renishaw-ready, Y.O.M. 2006, Weight 7500 kgs, Turning package, Max dia 65mm, RPM: 15 / 4500, Max 42,5 KW / 90 Nm., Hydraulic clamping 800 Nm., Bar loader ILS-RBK- 10012 65, Diameters min/max 5/65 mm L= 600-1200 mm, Highspeed (2), 60m/min., Spindle 20-12.000 min.â ...

max. swing over bed: 260 mm max. turning diameter: 315 mm control: SIEMENS 840D spindle bore: 50 mm spindle diameter in front bearing: 100 mm Torque: 460 Nm chucking diameter: 200 / 250 mm with 1-bed slide: number of cross-slides: 1 tool taper: HSK C63 numbers of positions in the tool changer: 12 max. tool diameter: 40 mm Dimensions (L x W x H): 5.500 x 11.600 x 3.300 mm weight of the machine: 12.500 kg 6-axis vertical CNC Turning & Grinding Center | EMAG - VSC 400 DDS Additional equipment: - Robotorsierte Werkstückladeeinheit (AMT Automation with Kuka) The machine is in very good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VSC400DDS | VSC400 DDS | VSC-400 DDS | VSC 400DDS | VSC 400-DDS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 800 mm Table width: 400 mm Longitudinal X: 620 mm Cross Y: 420 mm Vertical Z: 380 mm MACH-id    5300 MAKE       AVIA Poland TYPE         FNF-40C YOP           1998 SPECIFICATIONS X-Axis         620 mm Y-Axis         420 mm Z-Axis         380 mm Table Length          800 mm Table Width            400 mm Table load in kG          300 Kg Spindle taper         40 Mk/Bt/ISO/HSk Spindle speeds       3150 Rpm Feed rate X-Axis        2000 mm/min. Feed rate Y-Axis         2000 mm/min. Feed rate Z-Axis        ...

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Table length: 1000 mm Table width: 600 mm Longitudinal X: 630 mm Cross Y: 560 mm Vertical Z: 560 mm Positions ATC: 24   CNC Brand: Heidenhain CNC Model: TNC 430 SPECIFICATIONS X - Travel  630 mm Y - Travel  560 mm Z - Travel  560 mm Controll  HeidenHain TNC 430 Table Length x Width  1000 x 600 mm Table load in kG  500 Kg Spindle Taper   Sk40 / HSK 63kW power on spindle    9 / 13 kW Spindle speeds / ranges   18.000 Rpm ATC tool changer  12 + 12 = 24 x Coolant true spindle / Bar   17 Bar Bar Number off controlled axis   3 + 1 B Axis

Table length: 0 mm Table width: 0 mm Longitudinal X: 630 mm Cross Y: 560 mm Vertical Z: 560 mm Positions ATC: 0   Positions APC: 0   CNC Brand: Heidenhain CNC Model: TNC 430 SPECIFICATIONS X - Travel  630 mm Y - Travel  560 mm Z - Travel  560 mm Controll  TNC 430 Spindle Taper  Bt 40 Spindle speeds / ranges  20 - 18000 Rpm ATC tool changer  Bt 40 & Hsk 63  

5-axis machining center with 2-fold pallet changer Travel x/ y/ z = 600/ 770/ 675 mm Swivel/rotary table (A/B axis) Pallet changer 2-fold Pallet size 400x400 mm Spindle speed up to 16,000 1/min Spindle power 160/ 223 Nm Tool magazine 34-fold + additional magazine 99 tool positions Tool holder HSK 63 - Control Siemens 840D sl - Additional magazine TM99 - Automatic opening/closing for manual loading and unloading - Pallets with fluid connections (coupling connections) - Electromechanical tool length device - Infrared probe Renishaw - Internal coolant supply, infinitely variable up to 38 bar - Handheld control unit - Workspace extraction - Remote machine diagnostics - Brankamp machine protection system - Hydraulic clamping of the workpieces on the pallet

Table length: 1230 mm Table width: 410 mm Longitudinal X: 700 mm Cross Y: 315 mm Vertical Z: 540 mm CNC Brand: Heidenhain CNC Model: TNC 426 Make Fehlmann 82Type82 CNC HF Year 1998 Heidenhain TNC 426 Table length (mm) X = 700 Table width (mm) Y = 315 Longitudinal  X (mm) Z = 540 Cross Y (mm) Hsk 50 / 30.000 Vertical Z (mm) Table 1230 x 410 Rapid = 15.000 mm Large tooling 4e axis with tilting !  

CNC,5 Axis JOBS,Linx Compact + Heidenhain TNC 530 HSCI Year of construction: 2013 X-2000 Speed up to 60m/min , Force (N) 9000 Acceleration 4,5 m/sec2 Y-3000 Speed up to 60m/min , Force (N) 9000 Acceleration 6.0 m/sec2 Z-1250 Speed up to 60m/min , Force (N) 9000 acceleration 7,2 m/sec2 C - +/- 200 straight , torque 1200Nm ,max. torque with clamped axle 5000 Nm A - -120/+95 Torque 1200Nm ,Maximum torque with clamped axis 5000NM Speed: 15,000 rpm Cone according to HSK-A-100 Weight : 70000 kg Tool magazine type chain 32 tool positions, Max tool weight 15kg for more info, please call or write e-mail. Machine is immediately available and if you are seriously interested, you can inspect it under power An invoice with VAT will be issued

SPECIFICATIONS: Machining center with grid table Working range X mm: 4300 Working range Y mm: 2200 Working range Z mm: 170 Milling unit - Electrospindle HSK F63, KW 13.2 Drill head type BH10 vertical/horizontal 2 vacuum pumps, each 250 m3 Automatic loading and unloading system Scissor lift Length unloading carpet mm: 4.940 Automatic unloading Automatic lubrication system Additional workstation for displaying and printing labels Revolver tool magazine with 16 positions

Double-spindle machining center with swivel axis One side 5.axes with swivel bridge and rotary tables. One side 4th axis, without swing bridge, 5th axis prepared. Workspace x-axis 400 mm y-axis (tool change position) 450 (700) mm z-axis 400 mm Swivel beam/counter bearing with face toothing ----- Number of spindles 2 Spindle spacing 400 mm Spindle speeds up to 17,500 rpm Power 40/ 100% ED 25/ 18 KW ----- Feed/rapid traverse 50,000 mm/min Tool magazine 2 x 60 tool slots Tool holder HSK 63 Equipment: - Expansion of the tool magazine to 2 x 60 tool positions per spindle - Oil distributor for NC rotary table - 5.Axis for one side - Extension of machine hydraulics - Increased clamping pressure to 250 bar - Connection to central coolant system - IKZ 70 bar - Automatic loading door - Pneumatic support control - Flushing package - Tool life monitoring -Probe - Art ...

Vertical machining center DMU 60 :::TECHNICAL SPECIFICATIONS::: CNC Model: Heidenhain CNC version: iTNC 530 Tool connection: HSK 63 Spindle power: 12Kw Number of Spindle Revolutions: 12000 Number of tools: 24 ( 12 x 2 ) X Axis Travel: 630mm Y Axis Travel: 560mm Z Axis Travel: 560mm Rapid linear axis feeds X Y Z: 20m/min Table dimensions: 1000 x 600mm Table capacity: 500Kg Guides: roller High refrigerant pressure: yes Chip evacuator: carpet operated :::D IMENSIONS AND WEIGHT::: Length: 3500mm Width: 2700mm Height: 2210mm Weight: 6500Kg

min/max distance from spindle to table: 250 gt; 800 mm X-axis: 1200 mm Y-axis: 1000 mm Z-axis: 550 mm Table dimensions: 1400 x 1000 mm Max weight on the table: 2 ton Admission in spindle (ISO): HSK 63A Power on the spindle: 15 kW Control : Siemens Sinumerik Toolchanger: yes Number of toolholders: 60 positions Number of rotations: 10 > 15 000 rpm Length: 4560 mm Depth: 3955 mm Height: 3132 mm Weight: 12 ton

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

x-travel: 3800 mm y-travel: 2000 mm z-travel: 670 mm Control: Siemens type: 840 D sl surface area: 3000x1800 mm milling spindle: 120 KW turning speeds: 30.000 U/min tool holder: HSK 63 Tool changer: 124 Pos c-axis: angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² //  ...

Machining center horizontal MAKINO MAG 1 Manufacturer: Makino YEAR: 2015 Control Fanuc Clamping table surface ... 800x800mm Axis X ... 1520mm Axis Y ... 1100mm Axis Z ... 1350mm Spindle speed... 500-33000 rpm. controlled axes ... 5 cooling HSK - F80 workpiece height ... 1500mm workpiece weight ... 1300kg workpiece diameter ... 1500mm Axis A ... 110° Axis B ... 360° The machine is in good condition, possible to test under power.

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Suitable for dressing and profiling diamond and CBN grinding wheels., Accessories: Total enclosure, Rush camera system with high-resolution B / W camera (15x, 30x, 60x zoom), autom. Zoom control, video overlay (CAD drawing on live image) with 22 LCD monitor and Ruvision software, On-board PC with Windows and 17 monitor, Glass scale on the linear axes X and Z, 2 machine lights 12 V, Cooling system 30 Liter tank, Automatic delivery and tilting via servomotors, control panel with touch, Automatically starting position at the end of the work process, Central lubrication, Mist extractor., Specifications: Grinding wheel holder HSK 50 E, diamond grinding wheel diameter 50 - 250 mm, max. grinding wheel width 70 mm, grinding wheel bore diameter 20 mm, speed of the diamond / CBN wheel spindle stepless adjustable 100 - 1000 rpm, connected load of the motor of the grinding wheel 1,75 kW, grinding wh ...

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 3Longitudinal stroke1200 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

Matec 50 HV/NC 5-Axis (Traveling Column) CNC Vertical Machining Center Table size 1150 x 510 mm. NC rotary table (integrated) 1000 mm Travel X-axis 4000 mm. Travel Y-axis 1000 mm. Travel Z-axis 1300 mm. Number of tool places 48 pieces. Maximum speed of the working spindle 8,000 rpm. Tool holder HSK 100 A CNC control Heidenhain i TNC 530 If you have any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

GeneralTwo spindle turning/milling centre with - Main and counter spindle; Control: CELOS with Siemens 840D sl Operate Tool holder 2Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)10 kWTurning-milling spindleSpindle taperHSK-A 63 Spindle speed-12000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% DC)85 NmTorque (40% DC)120 Nmlocking moment1000 NmSwivelling range+/-110 degreeTool magazineNumber of tools24 Max. tool length230 mmMax. tool diameter80 mmMax. tool weight7 KgSlide 3Longitudinal stroke1200 mmSlide 2Longitudinal stroke1200 mmTransverse stroke195 mmSlide 1Longitudinal stroke1200 mmTransverse stroke490 mmY axis, vertical+/- 100 mmHeadstock, rightClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWDri ...

Warehouse number: 3686 PROCESSING Manufacturer: Takumi , Type: B8 Machine NO.: P0127, Year of construction: 2002 Specifications: Table size 1320 x 800 mm Longitudinal movement (X) 1200 mm Transverse movement (Y) 800 mm Vertical movement (Z) 500 mm Spindle speeds 20,000 rpm Spindle motor 15 Kw Tool changer 20 places Tool holder HSK-60A Rapid traverse XYZ 30 m/min Control Siemens 840D Fabr. Controlled in axes 3 Portal Type Accessories: Cooling water system. Length: 3550 mm, Høhe: 2770 mm, Width: 2260 mm, Weight: 6.850 kg

Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on reques ...

x-travel: 1000 mm y-travel: 800 mm z-travel: 900 mm control: HEIDENHAIN type: TNC 530 itnc mm rotary table dia.: 600 mm spindle taper: HSK 63 turning speeds: 18000 U/min workpiece weight: 3000 kg Tool changer: 30 Pos. : table - swivable: Grad total power requirement: . kW weight of the machine ca.: 12 t dimensions of the machine ca.: . m DEPO DYNAMIC 1009 • X axis (milling unit/cross slide move across): 1,000 mm • Y-axis (crossbar moves lengthways): 900 (+170) mm • Z-axis (milling unit moves vertically): 600 mm • Feed / rapid traverse X, Y and Z axis: 40,000 mm/min • Acceleration X, Y and Z axis: 5 m/s2 • Workpiece carrier – clamping surface (X/Y): 1,200 x 1,000 mm • Distance spindle nose / clamping surface: max. 750 mm • Main spindle 80 Nm, 30 KW (S1 / 100% duty cycle) - Electronic hand wheel • Chip disposal • Air supply through the inner spindle (ILZ) • Workroo ...

Year of construction 2007 Control Siemens 840D Rotational diameter. [mm] 640 Turning length [mm] 1500 Main Spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Counter spindle: Motor Spindle Technology Speed 5,000 rpm Power 35 kW Torque 370 Nm C-axis 0.001° Bar passage 65 mm Workpiece clamping 3-jaw chuck, Schunk ROTA NCF plus 315-104 Travel in Z 1,500 mm Tool carrier I (X/Y/Z/B): Technology Milling spindle on cross slide Speed 12,000 rpm Power 22 kW Torque 100 Nm Tool holder HSK-A63 Travel X/Y/Z 550/220/1,585 mm Rapid traverse in X/Y/Z 40/24/70 m/min B-axis 240° Tool carrier II (X/Z): Technology Star turret with 12 stations Tool holders VDI40 Tool drive 4,000 rpm, 10.7 kW, 32 Nm Travel in X/Z 225/1,400 mm Rapid traverse in X/R  ...

HAMUEL HSTM 1500 Used 5-axis vertical machining center Make: HAMUEL Model: HSTM 1500 YEAR 2009 X-AXIS TRAVEL 1930 mm Y-AXIS TRAVEL 400 mm Z-AXIS TRAVEL 570 mm RAPID FEEDS X-Y-Z 40 – 40 – 40 m/min SPINDLE 16000 rpm; 54 kW; 136 Nm; HSK 63 B-AXIS ±95 ° MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 24 POS CONTROL UNIT SIEMENS 840 D WORKING HOURS 9800 WEIGHT 25000 Kg OVERALL DIMENSIONS 6400 x 2800 x 3000 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; USB PORT ; RENISHAW TOUCH PROBE NOTE MAX PIECE DIMENSIONS: 1750X360 mm; MAX ADMITTED LOAD: 200 Kg; A/C AXIS CONTINUOUS POSITIONER; POSITIONERS: 180 rpm

Used 5-axis bridge-type machining center ROEDERS PXP601DSH (A3750) Condition: USED YEAR 2014 X-AXIS TRAVEL 540 mm Y-AXIS TRAVEL 635 mm Z-AXIS TRAVEL 400 mm DISTANCE SPINDLE NOSE-TABLE 50-555 mm RAPID FEEDS X-Y-Z 60 m/min SPINDLE 42000 rpm; 14 kW; HSK E40 A-AXIS ± 115 ° TABLE SIZE 340 x 340 mm MAX ADMITTED LOAD 200 Kg TOOL MAGAZINE CHAIN-TYPE ; 96 POS MAX TOOL DIAMETER 16 mm CONTROL UNIT ROEDERS RMS6X.xx4 WEIGHT 10000 Kg OVERALL DIMENSIONS 2885 x 2760 x 3050 mm ACCESSORIES SWARF CONVEYOR ; PAPER FILTER ; SPINDLE COOLING SYSTEM ; EXHAUST SYSTEM NOTE AXES WITH LINEAR MOTOR

Machining center bridge-type 5-axis FAMU Active Five 2000 Make: FAMU Model: Active Five 2000 YEAR 2008 X-AXIS TRAVEL 2000 mm Y-AXIS TRAVEL 1800 mm Z-AXIS TRAVEL 850 mm RAPID FEEDS X-Y-Z 30 m/min SPINDLE 0 – 22000 rpm; 30 kW; HSK A63 TABLE SIZE 2100 x 1000 mm MAX ADMITTED LOAD 3000 Kg HIGH PRESSURE COOLANT 50 Bar TOOL MAGAZINE CHAIN-TYPE ; 30 POS CONTROL UNIT HEIDENHAIN iTNC 530 WEIGHT 19500 Kg OVERALL DIMENSIONS 5850 x 3880 x 3860 mm ACCESSORIES PORTABLE HANDWHEEL ; SWARF CONVEYOR ; LINEAR SCALES NOTE TOTAL RETROFIT ON CONTINUOUS POSITIONING A and B-AXIS HEAD AND ON ELECTRO SPINDLE (YEAR 2021)

JOBS Linx Compact portal milling machine Electrospindle 250-18000 rpm-40Kw HSK-A-63 attachment Fork head X and Y axes driven by linear motors CNC Fidia C20 Tool magazine 24 positions Dimensions 6000 X 7000 height 5600 Year 2001

4. Axis incl. control for: milling, grinding, testing/measuring; Engrave IDEAL also for "machines in training" Specifications: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial runout: 0.006 (optional: 0.003 mm or 0.002 mm) Transport load max.: (limited by motor) without support: 40 kg (only if turntable is screwed down) with support: 80 kg Total weight, approx.: 25 kg Execution: - Stepper motor - motor-dependent, backlash-free timing belt drive including correct preload - With automatic spindle clamping with 6bar compressed air - Fully sealed IP 67 - Sensors with light-emitting diodes, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnostics - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis)  ...

DMG DMC 160U DUOBLOCK WITH 6 PALLET CHANGER Manufacturer DMG Model DMC 160U duoBLOCK Year 2008 CNC SIEMENS 8400 Powerline 3D Table Rotary pallet changer INCLUDED Rotary pallet storage RS4 – 4 pallets + 2 pallets in machine INCLUDED Total pallets 6 Pallet surface 1.250×1.000 mm. T Slots DIN 55201-A2 Table turning range (C Axis) 0,001 º (Continuous) Travels and feeds Longitudinal travel (X Axis) 1.600 mm. Cross travel (Y Axis) 1.250 mm Vertical travel (Z Axis) 1.000 mm. Main Spindle Automatic swivel milling head 0.001 º (Continuous) Rapid Traverse 60.000 mm/min Spindle taper HSK-A 63 DIN 69893 Spindle speed 20-30.000 rpm Main spindle power 85/65 kW Main spindle torque 40/32 Nm Automatic tool changer Type Horizontal double gripper ATC positions 120 Equipment Internal Coolant 50 bar INCLUDED Coolant deposit capacity 980 l. Oil and emulsion mist separ ...

Machine Details Warehouse number 1105-03697 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 08 S Year of construction 1998 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately - pre-sale Freight base from stock HAGUENAU FRANCE Technical details x-travel 300 mm y-travel 250 mm z-travel 250 mm Total power requirement 8 kW Machine weight approx. 1.8 t Information very well maintained 3 axles BZ CHIRON FZ 08 with FANUC 18 I M - speeds up to 10000 rpm - rapid traverses up to 60 m ! HSK 30

Machine Details Warehouse number 1105-03697 Machine Type Machining Center - Vertical Brand CHIRON Type FZ 08 S Year of construction 1998 Control type CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately - pre-sale Freight base from stock HAGUENAU FRANCE Technical details x-travel 300 mm y-travel 250 mm z-travel 250 mm Total power requirement 8 kW Machine weight approx. 1.8 t Information very well maintained 5 axis BZ CHIRON FZ 08 with FANUC 21 M - speeds up to 10000 rpm - rapid traverses up to 60 m ! HSK 30 integrated with 4/5 axe peiseler SPAENEWANNE

5-Axis Horizontal Machining Center with Pallet changer Mandelli Spark 3500X New in 2018 Siemens Sinumerik 840D control Number of pallets 2 Pallet size 1250 x 1600 mm Pallet load capacity max. 5100 kg 4th axis 0.001° NC rotary table 5th Axis NC-Tilting milling head A-Axis +80° ~ -120° X 3500mm Y 1850mm Z 1800 mm Feeds X,Y,Z up to 20000 mm/min. Rapids X,Y,Z up to 35000 mm/min. Tool taper HSK-A100 Spindle drive motor rating 46/67.7 kW Spindle speeds up to 6000 rpm. Spindle torque max. 1851 Nm 200 station tool magazines. Tool diameter max. 120 mm/425 mm Tool length max. 600 mm Tool weight max. 35 kg Coolant through the spindle 25/40/60 bar Proposal Number MH-6234

Hermle C600 U 5 axis simultaneous machining center The machine can be seen in working condition Simultaneous 16000 cycles Heidenhain tnc 530 control unit Tool measuring Blum laser Automatic renishaw probe measurement Spindle condition is good Kinematics good 15 pieces hsk 63 holders and manus pos software will also be given.

::TECHNICAL SPECIFICATIONS::: CNC Model: Selca CNC Version: 4045R Tool connection: HSK 63 Spindle power: 40Kw Number of spindle revolutions: 18000 Number of tools: 30 X Axis Travel: 1200mm Y Axis Travel: 1000mm Z Axis Travel: 600mm Rapid feed linear axes X Y Z: 60m/min Guides: roller Tilting rotary table: yes Tilting rotary table type: continuous Degrees tilting rotary table: - 30° +100° Table size: 860mm Permissible load on the board: 500Kg High refrigerant pressure: yes System with external tank with filter: yes Chip evacuator: carpet operated Other technical data: Drives: Simodrive 611 base with Selca adjustment boards The machine has been overhauled all axle roller guides, all ball screws and all bearings, axle geometry have been replaced

Description: Lot of toolholders , HSK+C 100,  ,40 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,500 mm

Röders RFM 760 - 2 HSC machining center, Year of construction 2001 / overhauled 2017, Röder's control, Travel X/Y/Z 760/550/400 mm , Spindle speed up to 42,000 rpm, HSK E 40, Table size 860 x 550 mm, Tool changer 28 times, B axis, filter system, Tool laser measurement,

SHW Uniforce 5 Travel • X-axis (bed): 5,000 mm • Z-axis (vertical): 1,000 mm • Y-axis (headstock): 1,300 mm Control • CNC control: Siemens SINUMERIK 840D Universal milling head in orthogonal design • Swivel range milling head holder: 360 x 1 degree • Swivel range milling head: 180 x 1 degree • Tool holder: HSK 100 • Speed range: 22 – 4,000 1/min Year of construction 1998 • 2022 – partial overhaul o Inspection of all components -> replacement if necessary o General overhaul milling head o Geometric acceptance takes place after New machine acceptance protocol Clip •Mounting table: Conveyor • Task length: Coolant device • Paper belt filter system • Container capacity: 800 l Automatic tool changer •Tool magazine with 90 magazine slots Reversible clamping device Rückle PKTW 2 About us: MBM Maschinenservice & G ...

CNC controller: FANUC 31i-B Axes X-axis travel mm: 1.050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0,001º Distance spindle nose - table surface mm: 100-950 Worktable Number of pallets: 2 Table dimensions mm: 630x630 Maximum workpiece size (D x H) mm: ø1.100x1.100 Max. workpiece weight kg: 1.200 APC time s: 15,5 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tool system Tool holder: HSK-A100 Tool magazine slots: 90 Max. Tool Diameter mm: ø250 Max. Tool Length mm: 550 Tool-to-tool time s: 2,4 Chip-to-chip time s: 4,5 Equipment Electronic Handwheel Chip conveyor 3D Renishaw tool probe Rinsing gun Signal lamp High pressure pump Mist collector 4th axis RS 232 interface Internal coolant supply 4x pallets Toolholders are not included Machine running times Spindle Working: 6.026 B ...

Description: Holder HSK 63 With additional sleeves Approx. Onsite Dimension. (l x w x h): 200 x 200 x 100 mm, weight approx.: 5 kg

x-travel:750 mm y-travel:840 mm z-travel:865 mm number of spindles:2 From cylider crank case production 2 spindles HSK-A63 4 axes, A-axis

different tool holders 34 pcs  HSK63       --> 20.- EUR/ pice 120 pcs HSK-A-100   --> 20.- EUR/ pice

X-axis: 1050mm, y-axis: 560mm, z-axis: 520mm, table dimensions: 1200x515mm, max. workpiece weight: 800kg, tool holder: SK40 DIN 69871 / HSK A63, control: Heidenhain iTNC 530, with documentation, an inspection is possible.

CNC machining center including laser edge type BIMA / Gx50 / E / 160 / 630 Specifications: IMA gantry machine in real GANTRY design Processing area: • Length in X direction with all aggregates (mm): 6300 • Width in Y-direction with all aggregates (mm): 1600 • Height in Z-direction with all aggregates (mm): 225 maximum clamping height including clamping device - the maximum workpiece thickness depends on equipment/application • Length in X direction with vertically positioned main spindle and tool diameter 20 mm: 6300 mm • Width in Y-direction with vertically positioned main spindle and tool diameter 20 mm: 2000 mm • Width in Y-direction with edging (mm): 1600 • Length in X-direction Single user processing without gluing (mm): 2 x 3050 • Length in X-direction free space center (mm): 200 • Length in X-direction Single user processing with gluing (mm): 2 x 2 ...

Control: Sinumetrik 840D sl, operating hours: 41528h, spindle running time: 25436h. Shift utilization: 3-shift, orientation: horizontal, dimensions/travel X/Y/Z: 200mm/500mm/425mm. Tool holder/size: HSK-A63, max. spindle speed: 17500 rpm, internal coolant supply available. Tool changer available with 4x46 tool positions and pick-up process. Including: Coolant preparation: Knoll.

X-travel: 500mm, y-travel: 380mm, z-travel: 360mm, main spindle/turning spindle speed: 10,500/ 3000/min, max. axis speed: 60m/min, control: Siemens 840D, with HSK-A63 and collet chuck, some spare parts are also available.