hp printer used for sale

Auction-ID: A1-44897-84

4x Blue PLA material Auction-ID: A1-44905-167

The year of build is 2018. The machine is shrink wrapped in a warehouse, so I cannot get to the meter reading. The last one I have is from 2022. We have not used it very much since that date…probably less than 3 rolls of paper. Color 337 B/W 669 Find more here - / Contact us at -

Label printer, barcode printer, printer, logistic labeling system -Labeler Anvos Model PB 101 FlagTag Type: HA101FTS -Barcode printer manufacturer SATO type: CL408e-2A -Max. Print width: 110 mm -Dimensions: 880/560/H1365 mm -Weight: 104kg

Small-character inkjet printer -Machine: is untested and sold as a source of spare parts -Dimensions: 500/600/H1750 mm -Weight: 40 kg

including label rewinder; without pallet; Auction-ID: A1-43992-229

including label rewinder; without pallet; Auction-ID: A1-43992-230

Dim. approx. hxbxd 115x115x70 cm. Auction-ID: A1-44654-34

Dim. approx. hxbxd 40x41x38 cm. Auction-ID: A1-44654-142

Dim. approx. hxbxd 40x41x38 cm. Auction-ID: A1-44654-141

Dim. approx. hxbxd 41x41x54 cm. Auction-ID: A1-44654-143

2013 Stratasys 360mc Great condition It has built in a compressor so no external air supply is needed. It has an external 3phase transformer.

The operating times are specified with 1387 h. However, this is the time that the printer was connected to the network. The pure printing time is 40 h The printer was serviced regularly until last year in March 2022. Technical data Model AGILISTA-3200W Printing material AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) Support material AR-S1 (water soluble support material) Installation space 297 × 210 × 200 mm (A4 size × 200 mm) Resolution 635 × 400 dpi Layer thickness High resolution AR-M2: 15 µm Normal resolution AR-M2: 20µm AR-H1: 20µm AR-G1L/H: 30µm Power supply Supply voltage 100 to 240 VAC, 50/60 Hz Power consumption Max. 750 VA Interface Ethernet 10BASE-T / 100BASE-TX Operation Interactive color touch panel Software Name Mode ...

with accessories, transport case Auction-ID: A1-45526-7

I think the machine dates from the 1990s. The machine was used until last year. It has been replaced by a newer machine. Have a nice day, This is an MPM Corporation screen printing machine. The model is as follows: UP2030. Find more here - / Contact us at -

3D Systems Projet MJP 2500 3D Printer the printer is refurbished with a new print head. This is a 3D Systems MJP 2500 Plus printer. This was overhauled in December 2022. Among other things, a new print head was installed. Since the general overhaul, the printer has run about 100 hours. The unit works perfectly ProJet® MJP 2500 Plus 3D printer system: - Installation space: 294 x 211 x 144 mm in X, Y, Z axis. - Layer thickness: 0.032 mm - Resolution: 800 x 900 x 790 dpi (X-, Y-, Z-axis) - weight: approx. 211 kg - Power supply: 230 V, 16 A, 50 Hz - Data connection: Ethernet TCP-IP, USB port - CE certified Material options - VisiJet® M2 Armor M2G-CL construction material - clear, flexible, ABS-like (HD + UHD) - VisiJet® M2 ProFlex M2G-DUR build material - clear, flexible, polypropylene-like (HD + UHD) - VisiJet® M2R-GRY construction material - opaque, gray, rigid (HD + UH ...

DTG PRINTER Kornit storm HD6 YEAR 2017 MADE IN ISRAEL EQUIPMENT: TEXTILE DIGITAL PRINTER MODEL: STORM HEXA SERIES LOCATION: (Mexico City) Specifications DTG T-Shirt Printing Machine Prints one t-shirt in approximately 40 to 60 seconds Features 2 pallets for nearly simultaneous printing Equipped with 2 control monitors Requires a two-phase plug Initial setup assistance for printing Does not come with inks or spare parts Printing time per t-shirt: 60 to 90 seconds Is already packed and stored Find more here - / Contact us at -

Auction-ID: A1-45411-564

2021 Videojet 1520 TubeWriter 360 and Videojet 1520 Labels can be damaged or even peel off altogether when exposed to storage conditions or machinery, disrupting experiments when unidentifiable samples need to be replaced. Any tube, any vial, any size: The TubeWriter 360 prints on anything that fits underneath the inkjet printhead, including the side or top of any tube, vial, histology cassette, microscope slide, cryovial and much more with clear labels that ensure you ensure that they are easy to identify and reduce the risk of confusion. This machine, after installation, was only used for training purposes and never for operational purposes. So it can be seen as a brand new machine. The photo below shows different molds/holders that may contain different materials that you want to label. Find more here - / Contact us at -

Essemtec SP600 SMT stencil printer Find more here - / Contact us at -

Manufacturer: Canon Model: VP i300 Rev Model: Version 4.5.2.0 Year of Manufacture: 2020 Find more here - / Contact us at -

Manufacturer: EKRA Model: X4 PROF Weight: 920 kg Year of Manufacture: 2008 Nominal Voltage: 230 V AC Frequency: 50/60 Hz Working Voltage: 24 V DC Number of Phases: 1 Power: 1.2 kW Circuit Breakers: 16 A Pressure: 6 bar Maintenance status: Machine is not currently serviced, but is fully functional Operating hours: unfortunately no counter in the system; machine has been running on average in 1-shift operation since the beginning of 2008 Accessories: 2x squeegee 220mm, 65°; 2x squeegee 350mm, 65°; 2x squeegee 350mm, 45°; 2x squeegee 450mm, 65°; 2 support plates 275mm Documentation: complete system manual in paper form Operating system: WIN XP Software version: SCBDRV V6.11-2 Find more here - / Contact us at -

TRUMPF TruPrint 3000 3D Printers GENERAL Project No.: 905844 Quantity: 1 pcs. Manufacturer: TRUMPF Type: TruPrint 3000 Year of Make: 2016 Condition: Used machine Approx (hrs): 3571 DESCRIPTION LASER Laser power Preheating substrate plate 200 degrees Diameter buildable area 300 mm Overall height 400 mm 2 pcs. removable construction and storage cylinders Adjustable layer thickness 20-150/1000 mm GENERAL TECHNICAL DATA Mains fuse 32 A Machine dimensions (LxWxH) approx. 3385 x 1750 x 2070 mm Machine weight approx. 4300 kg NOTE Suitable for stainless steels, tool steels, aluminum, nickel-based or titanium alloys We have described the named product with the greatest possible care. However, since this does not come from our production, the data mentioned and the equipment details may differ. We therefore ask you to consider the description as non- ...

description: For printing of labels, bottles, packaging etc: prints only in black colors, incl. frame Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Important information on the auction and processing: Pick-up is only possible after prior written appointment. Only the item designated in the heading (only the machine) is for sale. Objects, attachments, tools, pallets, shelves or other materials visible in the photos are not part of the auction unless they are expressly mentioned in writing in the item description. All dimensions, weights, technical data and operating hours are approximate indications. No guarantee is given for correctness and completeness. Deviations are reserved. A forklift (1.6 t) is available by arrangement. There is no entitlement to free loading assistance, unless it is not time-consuming. In the event of extraordinary or disproportionate effort, we reserve the right to charge separately for any additional expenses incurred. The buyer is solely responsible for dismantling, loading and transporting. Mining is ...

Hollanders - ColorEdge 230 Precision cutting system for textile applications The ColorEdge 230 from Hollanders is a professional cutting system specially developed for the precise cutting precise cutting of textile materials. With a working width of 230 cm, This machine is ideal for roll-to-roll applications and guarantees clean, precise cuts, that meet the highest demands. Technical highlights: - Working width: Up to 230 cm. - Cutting technology: High-precision roll-to-roll cutting for even and accurate results. results. - Material compatibility: Suitable for a wide range of textiles (e.g. polyester). - Operation: Simple and efficient processing for maximum productivity. - Construction: Robust, durable design for continuous professional use. - Dimensions & weight approx. 320 x 200 x 130 cm (WxHxD), approx. 800-850 kg Spare parts renewed - PVC transport rollers (11/2023)  ...

HR 2K inkjet printer barcode labeling RA2309 Printer manufacturer: REA-JET Printer type HR Operation: Control unit with control panel Print type: Inkjet printer interfaces: Eternet Stainless steel control unit in IP65 design Full-color graphic display, diagonal of 14.4 cm (5.7 inches) Graphic user guidance in many languages Support for True Type Fonts (TTF) and Unicode character set Operation: ten-key keypad, cursor block, push and turn operation REA JET HR 2K (with 2 writing heads, up to 25.4 mm writing height) Maximum speed of the system: 762m/min at 60 dpi resolution. 142m/min at 300 dpi. Maximum is 600 dpi. Condition: Worked until dismantling, we have no cartridges available for prior testing. Electrically everything seems to work perfectly (see photos) Abrasion on the rotary encoder (see photo) and USB cover is missing (see foro). Prices net plus VAT ex central warehouse Dr. Sonn ...

Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: ...

Legi-Air 4040Z with Zebra110pax4 label printer and pneumatic stamp. RA1933 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status indicator and buttons Print type: thermal transfer printing or direct thermal printing selectable Interfaces: RS 232 Seriel, IEEE 1284 Print media: standard media, tags and RFID media (reading and coding of RFIF labels) label length min: 12,7mm width print media: 16-114mm ribbon width: 25,4-107mm Ribbon length max: 900m Roll size diameter core: 25,4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) dot size 0,125mm x 0,125mm Print speed: 12 inch/second Features: Breite Druckmedium: 16-114mm Breite Farbband: 25,4-107mm Maximale Länge Farbband: 900m Punktgröße: 0,125mm 0,125mm Druckgeschwindigkeit: 12 \/s, 304,8 mm/s Druckertyp: 110Pax4 Druckmedien: Standart, Anhänger und RFID-Etiketten

Manufacturer: Durst Model: P10 200 Year of Manufacture: 2015 Condition: Used. Good . Find more here - / Contact us at -

Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible.

Printing speed: 325m/min, machine dimensions X/Y/Z: 450mm/360mm/530mm, weight: approx. 25kg, operating hours: 4143h. Documentation available. On-site inspection is possible. Expected to be available from August 2025.

Manufacturer: DEK Model: HORIZON 03i Year of Manufacture: 2009 Voltage: 230V Current (Full Load): 6A Frequency: 50/60 Hz Phase: 1Ø Compressed Air Pressure: 5–8 Bar Short Circuit Current Rating: 2kA RMS symmetrical, 240V maximum Find more here - / Contact us at -

Hitachi Inkjet Printer, used units. Interesting may look with Ms Lai KW at 011-28357830.

STORK PEGASUS ROTARY SCREEN PRINTER STORK PEGASUS ROTARY SCREEN PRINTER. TYPE 3200/24/20 .Year 2001 20 colours installed on a 24 position print block. Max printing width 3200mm Repeat sizes 640/914mm . Magnet System print paste application. Comprising : High entry with fabric guide rollers E+L KF 2020 edge guiders ,dust extraction unit. Reconditioned and upgraded January, 2024 Fabric passage onto a Curved Plate with Thermoplast , Wet Gluing.Belt Washing. STORK APOLLO Dryer ,Type 3200. 2 compartments ,Gas heated with support conveyor. Ext with fabric take off rollers and plaiter. Find more here - / Contact us at -

Age 1999, Consisting of:, Elevator Tray Feeder, Cross Conveyor feeder, Universal screw Denester, ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray., Max. Cup dia.130 mm, Min. Cup dia. 60 mm, Max. Height of Cups 150 mm, Min. height of cups 35 mm, Max. Printing Length : 362 mm, Taper 2 - 10 degs, Max. speed depending on size & shape of Cups: 36,000/ hr, Siemens S5 PLC Controls, Siemens CORTOS OP25 display with Touch-pad Controls., Max Height of Cups: 150 mm, Min height of cups: 35 mm, Max Printing Length: 362 mm, Taper: 2 – 10 degs, Max. Cup dia: 130 mm, Min. Cup dia: 60 mm, Max speed depending on size & shape of Cups: 36,000/ hr

Age 2000, Consisting of:, Elevator Tray Feeder, Cross Conveyor feeder, Universal screw Denester, ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester, 8-mandrel Indexing Turret, with Mandrel Holders for Cups, UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel, Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray., Max. Cup dia.130 mm, Min. Cup dia. 60 mm, Max. Height of Cups 150 mm, Min. height of cups 35 mm, Max. Printing Length : 362 mm, Taper 2 - 10 degs, Max. speed depending on size & shape of Cups: 36,000/ hr, Siemens S5 PLC Controls, Siemens OP25 display with Touch-pad Controls.

Printing technology: piezoelectric inkjet printing, print resolution X/Y: 1440dpi/1440dpi, print area X/Y: 615mm/415mm, machine dimensions X/Y/Z: approx. 1300mm/800mm/500mm, weight: approx. 80kg. The print heads as well as the ink and cleaning hoses must be repaired. Includes software CD and several printing plates/formats. Documentation available. An on-site inspection is possible.

A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible.

An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible.

Age 1995, For sale outside Europe, Automatic Elevator Tray-feeder, Auto-cross conveyor feeder to main Print Unit, Universal screw Denester, ARCOTEC CG30-2 Corona Pretreatment System, 8-mandrel Indexing Turret, with Mandrel Holders for Tubs, 6 x individually hinged dry-offset Print Heads., Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer, 2 x Form Rubber Rollers dia. 71 and 100 mm, 2 x Oscillating rollers, 2 x Idler Rollers, 1 x Ink Transfer roller (Ductor Roller), 1 x Ink Fountain, Ink Washing System on Print Heads, Positive Suction-cup pick & place and Take-off, 2 x Color Base Printer, 6 kW Jumbo UVITERNO UV Curing Tunnel, Counter/ Stacker station, Max. Container dimension 135 x 180 mm, Max. Printing Length 417 mm, Max. Height of Containers 125 mm, Min. height of Containers 30 mm, Max. speed 9000 containe ...

Bluhm Systeme Markoprint Integra One Printing System Markoprint Integra One with HP cartridge technology. The system with its small dimensions of 188 x 80 x 98 mm can be easily installed in or on production plants. The print head reaches top speeds of more than 180 m/min and has IP-65 protection class. The printing system is equipped with a display for data entry as well as changing and checking system settings. Operators can check or change variable print information and settings directly on site on the user-friendly display. Intuitive control is via an i-Logic button. In addition, maintenance statuses can be shown on the display. The Integra One is particularly compact with dimensions of 188 x 80 x 98 mm and was specially developed for system integration. Smart cartridge monitoring Intelligent SmartCard Cartridge Monitoring identifies the current ink type and autom ...

Manufacturer: Prodways Model: ProMaker P1000X Year of Manufacture: 2021 Type of Machine : SLS plastic 3D printer, including nitrogen generator Condition: Used Operational: Yes Included Equipment: - Prodways ProMaker P1000X – SLS Plastic 3D Printer, including nitrogen generator - ProTool BS02 – Unpacking Station - Pallet Truck Overall Width: 1700 mm / 67 in Overall Depth: 1159 mm / 46 in Height: 2008 mm / 79 in Total Weight: 750 kg / 1653 lbs

Manufacturer: ProJet Model: 5500X Year of Manufacture: 2015 Printer Usage : Machine Hours: 1016 hrs, 54 mins, 00 secs Build Hours: 376 hrs, 12 mins, 39 secs Lamp Hours: 134 hrs, 07 mins, 47 secs Support Material Used: 0.10 kg Upper Part Material Used: 0.09 kg Lower Part Material Used: 0.00 kg It comes with a extra build plate, documentation, software and a few extra parts. 3D Systems’ ProJet® 5500X uses proven MultiJet Printing (MJP) technology to build the highest quality, most accurate and toughest multi-material parts available. Print finely detailed parts with varying degrees of flexibility, material transparency and color (black, white, or select shades of grey), all from one 3D printer. The ProJet 5500X features the fastest print speeds, a large build volume, and the most convenient print-to-part process, so it’s easier to create parts with engineered plastic or rub ...

Stratasys Objet24 Specifications Build Volume - 234 × 192 × 148.6 mm (9.21 × 7.55 × 5.85 in) Layer Thickness & Resolution - Layer Thickness: 28 microns (0.028 mm) - XY Resolution: 600 dpi - Z Resolution: 900 dpi Accuracy - ±0.1 mm Materials & Technology - Technology: PolyJet (material jetting with UV curing) - Materials: VeroWhitePlus™ (model), FullCure 705 (support) Printer Size & Weight - Dimensions: 825 × 620 × 590 mm (32.5″ × 24.4″ × 23.2″) - Weight: ~106 kg (234 lbs) Power & Connectivity - Power Requirements: - 100–120 VAC, 50–60 Hz, 7 A - 220–240 VAC, 50–60 Hz, 3.5 A - Network: Ethernet (TCP/IP) Find more here - / Contact us at -

For sale: Plotters, inkjet printers, in need of repair Manufacturer: HP Type: Designjet 500 Print size: A1 Areas of use: CAD plans, posters, architect plans, pictures, etc. Condition: in need of repair, Error code: 21:11 Fixed price: 250 Euro Extras: 15x paper rolls A1 /HP/Rauch. Price 150 euros extra!

LINX Inkjet Printer MIDI 2M, used units. For any inquiries, please contact: 1. email: yytantopglove.com.my 2. Contact Number: i. Mr Aaron: 017-3698203

Manufacturer: Stratasys Model: F370 Year of Manufacture: 2020 Operating hours: 3,493 Construction volume: 355 × 254 × 355 mm Variety of materials: ABS-M30, ASA, PC-ABS, TPU 92A, etc. Reliability: Closed build chamber with controlled temperature User-friendly: touchscreen, easy material handling, automatic calibration Software: GrabCAD Print compatible Power connection: 230 V Condition & Accessories: Very well maintained, no damage Fully functional 2. Material print head for CF material included Various printing materials included (some leftovers, but also originally packaged spools) Find more here - / Contact us at -

A complete 3D metal printing system is available. 1) 3x 3D metal printers Markforged Metal X, year of manufacture: 2021, printing process: Metal FFF, build volume X/Y/Z: 300mm/220mm/180mm, materials: 17-4PH/H13/A2/D2/Inconel 625/Cu, max. part dimensions X/Y/Z: 250mm/183mm/150mm, max. part weight: 10kg, layer height after sintering: 50µm/125µm, machine dimensions X/Y/Z: approx. 600mm/500mm/1150mm, operating hours: approx. 3300h. 2) Sintering furnace Markforged Sinter 2, year of manufacture: 2021, solvent volume: 18356cm³, max. temperature: 1300°C, washing duration: 17h-31h, machine dimensions X/Y/Z: approx. 1200mm/700mm/1500mm, weight: approx. 350kg. 3) Solvent washing table system LÖMI EDA30 M3D, year of manufacture: 2021, batch volume: 16L, max. operating temperature: 120°C, batch chamber dimensions X/Y/Z: 200mm/216mm/380mm, machine dimensions X/Y/Z: approx. 550mm/800mm/1000mm. In ...

3D Printer Stratasys Fortus 380mc (2017) Ideal equipment for companies dedicated to prototyping, tooling manufacturing, and serial production of functional parts. Operating hours: 689 h (very low usage) Technology: FDM Build volume: 355 × 305 × 305 mm Licenses and compatible materials: Nylon 12, PC-ABS, SR110 soluble support Accessories: Cleaning station for SR110 soluble supports 20 build trays Recently renovated parts: pulleys, belts, fittings, guide tubes Drying station with full maintenance (summer 2025) High precision and reliability in industrial environments. Low cost per part for medium and large production runs.