hot water used for sale

- Standard model - Opening width: 120 cm - Lifting capacity: 600 kg

- Standard model - max. opening: 120 cm - Load capacity: 600 kg

Max paper size 800 x 1280 mm Max weight 860 kgs Power 1,5 KW.

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 400 mm Table width: 200 mm Table load max.: 150 kg Execution: hydraulic Max. distance from table to spindle-centreline: 415 mm Longitudinal travel (X-axis): 420 mm Transversal travel (y axis): 192 mm Table speeds: stepless from: 2 m/min up to: 28 m/min Automatic vertical feed: Vertical rapid traverse: 0.18 m/min Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Wheel int. diameter: 51 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 2.2 kW Total power required: 6.1 HP Machine´s weight about: 1050 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2250 mm Dimensions electric cabinet: Length: 800 mm Width: 300 mm Height: 1450 mm Various accessories: Electrical mag ...

HBM Hottinger Baldwin Metrology; VKK2; 1996; 4 sensors each up to 2000kg; Stainless steel housing; with central detection unit terminal box; with 4 inputs and 2 outputs; designed for sourdough boiler 5000kg (Electronic scale; weighing system; without evaluation unit!)

Magnetic chuck diameter: 0 mm Grinding height: 530 mm Grinding wheel diameter: 0 mm SPECIFICATIONS Controll   ConventioneL Vario Cylindical / Surface / Other    Surface grinder X - Travel   1000 mm Y - Travel   500 mm Z - Travel   530 mm Electro magnetic table   1000 x 500 mm Work piece weight    1500 Kg DIMENSIONS Length   4000 mm Width   2300 mm Height   2450 mm  

Stack turner Hotung Mini ET; good condition; cleaned and tested; Format 950x660mm; Load capacity 750kg; Max. Stack height 1210mm. Pile turner Hotung Mini ET; good condition; cleaned and checked; Format 950x660mm; lifing capacity 750kg; max.pile hight 1210mm.

- CC controller Siemens 840 D - Year of construction 2002 Specification - Tip width: 600 mm - Tip height: 180 mm grinding Ø: 355 mm Z-axis speed: 15 m/min - min. Z-axis speed: 0.01 m/min - Axis resolution Z-axis: 0.5 μm X-axis speed: 10 m/min - min. X-axis speed: 0.01 m/min - Axis resolution X-axis: 0.5 μm - Grinding wheel left side (Øa x w x Øi): 500 x 80 x 203 mm - Grinding wheel circumference speed: 45 m/s - Power external grinding spindle drive: 10 kW - Speed workpiece spindle: 0 - 1000 m/min - Conical bore workpiece headstock: MK5 - Conical bore tailstock grain tip: MK4 - Cylindricity adjustment: +10° / - 4° - Total connected load: 28 kW - Operating voltage: 3x 400 V / 50 Hz - Total weight of the machine: 5800 kg - Operating sound level: 70 dB(A) according to EN 31201

Grinding length: 1000 mm Grinding width: 500 mm Grinding height: 500 mm Wheel diameter: 400 mm Spindle power: 16 kW X - Travel:              1000mm Y - Travel:              500mm Z - Travel:              500mm Table Length:            1000mm Table Width:             500mm Table load:              500 Feed rate X-Axis:        28000mm/min. Feed rate Z-Axis:        1000mm/min. Grinding stone dimensions:400 x 100 x 127mm Power:                   16kW Speeds:                  1400Rpm Feed rate Y-Axis:        10000mm/min. Lengt ...

technical details: - Thermal press for printing textiles (T-shirt, caps, towels, carrier bags, etc.) - Contact surface: 38 x 38 cm - Power: 1,750 W - Voltage: 230 V - Current: 7.5 A - Frequency: 50/60 Hz Shipping is of course possible. Shipping is plus freight and packaging costs, depending on size and weight. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Weight: 1.05t, with documentation, an inspection is possible.

GEIBEL UND HOTZ FS 420 SC surface grinding machine manufactured in 2006 in Germany, is designed for single or serial grinding of workpieces. The machine, distinguished by its high performance and reliability, machines workpieces with a maximum weight of 150 kg with the circumference of grinding discs on a magnetic plate with holding force control and demagnetisation function. During the process, special sensors ensure that the grinding wheel is properly balanced, guaranteeing the highest precision and quality of machining. The GEIBEL & HOTZ FS 420 SC magnetic grinding machine uses an energy-efficient hydraulic system to drive the work table, which provides the exact oil flow required to move the table. The pump is equipped with special filters to remove ferromagnetic impurities and non-magnetic substances from the coolant, resulting in safe and trouble-free operation of the grinding m ...

Transport trolleys, platform trolleys, transport trolleys, wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers -Manufacturer: Hota complete tire for strollers / bicycle trailers / scooters unused -Tires: 12 1/2 x 2 1/4 (57-203) -Rim: without bearings, inside O 25 mm -Quantity: 25 pieces -Price per piece -Weight: 1 kg / piece

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: G06 Item No.: 268471 -Power: 800W 230V -Number: 3x elements available -Price per piece -Dimensions cartridge: O 8 x 295 mm -Weight: 0.1kg/pcs

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: E03 Item No.: 140466 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 350 mm -Weight: 0.1kg/pcs

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: A06 Item No.: 246366 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 285 mm -Weight: 0.1kg/pcs

Hotmobil MKZ 48 chiller air-cooled 96.9 kW Manufacturer: Hotmobil MKZ 48 Type: Mobile refrigeration unit Air-cooled Power: 96.9 kW Weight: 1300 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 17 kW control: Siemens 840D total power requirement: 45 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3x3x2,2 m - max. grinding area Ø 800 x 500 mm, - Magnetic discs Ø 800 mm, - Table load max. 1,000 kg, - max. sanding spindle speed 3,150 1/min, - max. transverse movement 600 mm, - Cup wheel Ø max. 300 mm, - max. width 80 mm, mounting hole 127 mm, - control, Siemens, with - filter unit, Knoll, type HL250/2000, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 500 mm workpiece height: 425 mm Control: total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 1000 mm grinding width: 500 mm workpiece height: 425 mm Control: total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 500 mm workpiece height: 425 mm total power requirement: 15 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: 3pc HOTTINGER 5kHz Trägfrekvenz Measuring Amplifier in Lot (5kHz) Clean Items, Only Partially Tested (without Sensors) See the Pics. This old electronic is very reliable. Please find more details in the attached PDF. Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 50 kg

Key data: 600 mm, 450 mm

CNC surface grinding machine Geibel&Hotz FS640 Z-CB Year of construction 2021 Specifications: Sanding surface (in mm): 600 x 450 Sanding area (in mm): 600 x 400 x 375 Table load max.: 600 kg Grinding spindle motor: 3.7 kW Grinding wheel, standard (in mm): 300 x 50 x 76.2 Fork funnel with 2 shaped diamonds Folding dresser Universal paper filter machine UPF 140 / 20 Cleaning pump Compact air purification device 2nd LED machine light at the top right 6 x Grinding wheel holder flat cone Pre-installation of mobile balancing device Mobile Balancer Grinding spindle motor 7 / kW Control cabinet air conditioner Oil filling The machine has a toothed belt drive in the longitudinal axis Price net free loading from location.

internal diameter: 800 mm grinding depth: 500 mm swing diameter: 1000 mm grinding head - power requirement: 17 kW control: Siemens 840D Magnetic plate diameter: 800 mm table load capacity - central/maximum: 1200 kg spindle speed max.: 3150 U/min Cross movement max.: 600 mm cup wheel diameter: 300 mm total power requirement: 45 kW weight of the machine ca.: 9,5 t dimensions of the machine ca.: 3 x 3 x 2,2 m Equipment/Accessories: - various grinding spindles and grinding wheels - CBN dressing roll equipment - filter system, make Knoll, type HL250/2000 - documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 600 mm, 350 mm

Disc mounted with residual diameter 240mm and 40mm width Length approx. 4500 mm Width approx. 3000 mm Height approx. 2100 mm Weight approx. 2600 kg Very neat condition! The machine was in a training workshop.

Description: High-quality Precision Rotary Table Grinding Machine with a grinding range of 800 mm and a table load of up to 1000 kg. Control system and Machine number Control system: SIEMENS , Machine number: 10 3419 0709 Working area Max. grinding area: Ø 800 x 500 mm Magnetic disc diameter: 800 mm Max. table load: 1000 kg Traverse paths and Speeds Max. grinding spindle speed: 3150 rpm Table speed: 0 - 50 rpm Max. transverse movement: 600 mm Transverse and vertical speed: 5 - 4000 mm/min Grinding medium data Standard cup grinding wheel (Øoutside x w x Øinside): 300 x 80 x 127 mm Standard grinding disc holder , Grinding wheel bore: 127 mm Clamping width: 25 - 40 mm Flange diameter: 175 mm Please take a look at the technical data and the layout plan s in the PDF file. grinding depth: 500 mm, grinding spindle speed: 3,150 rpm, control: SIEMENS, a ...

grinding diameter:355 mm grinding length:600 mm centre height:180 mm total power requirement:30 kW weight of the machine ca.:7 t max. workpiece weight:150 kg workpiece spindle stepless:0-1000 U/min CNC precision cylindrical grinding machine with mobile switching and control panel, general retrofit 1 measuring device Marposs P5 1 attached industrial filter 1 2-way robot portal robot for automatic loading

grinding length:1500 mm grinding width:700 mm workpiece height:580 mm table load capacity:2380 kp table speed -stepless-:5 - 35 m/min grinding wheel dia. x width:500 x 100 x 203 mm grinding wheel motor:18 kW speeds::stufenlos elektronisch total power requirement:35 kW weight of the machine ca.:12 t dimensions of the machine ca.:5,3 x 2,9 x 3,8 (3,18) m surface grinding machine, paper-filter, DRO 3 axis, automatic infeed, el.handwheel, full cabin

grinding length: 800 mm grinding width: 400 mm workpiece height: 375 mm table surface area: 840 x 400 mm table speeds: 0,005 - 35 m/min spindle speeds (infinitely variable): 1000 - 3000 U/min grinding wheel motor: 3,7 kW grinding wheel size: 300 x 50 x 76,2 mm cross adjustment: 100 - 1250 mm/min rapid traverse vertical: 180 mm/min table load: max. 700 kg distance spindle center to table: max. 525 mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions of machine L x W x H: 3,14 x 1,78 x 2,50 m Accessories: magnetic plate 800 x 400 mm, grinding wheel with flange, wheel dressing attachment, wet grinding attachment with paper band filter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

Nordson FoamMelt 180 Hot Melt Machine, Hot Melt Gluer, Hot Melt Gluer H=155 cm, W=80 cm, D=80 cm Price: 7990,00 € VB plus 19% VAT. Manafacture: Nordson Model: FM 180 Year of construction: 1996 1 adjustable gear pump for even adhesive discharge Hose connections: 2 outlets, 2 returns) Hoses: 2 pcs. Tank volume: approx. 30 litres Sale only to commercial customers. In Nordson FoamMelt devices, the hot melt adhesive is foamed with inert gas (nitrogen). The larger volume results in material savings of up to 50%. During adhesive discharge, a foamed adhesive bead is created. In our opinion, the device is ideally suited to achieve significant savings in material costs for the bonding of cardboard packaging, folding cartons, etc., where it is irrelevant that the bead occasionally contains a small, visible bubble when the adhesive is discharged. The device can also be us ...

Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler contains a durable, electronically controlled, water cooled moving grate which is designed to burn from wood pellets to wood chips and waste wood. The plant was installed in year 2012 and it has been running with wood pellets till December 2022. It is complete, good condition plant with concrete element building, two large pellet silos and a hot water accumulator tank for heat load balancing. These items will be optionally available for those who are interested in them. It has load controlled primary and secondary air combustion fans as well as speed-controlled exhaust gas fan which ensures high efficiency combustion and low electric power consumption. Two step combustion is designed for low NOx emissions. The durable triple layered ceramic and steel combustion chamber includes flexible dilation joints ...

Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...

Cryovac STE96-600 hot water shrink tunnel Serial: SN00422 2014, Stainless hot water shrink tunnel, steam, belt dimensions 1300mm x 600mm, max product height 220mm, HMI touch screen control, 3Ph

for the storage of hot water / firefighting water. Dimensions: 2.50 m = D - L = approx. 10.70 m The container is used, empty inside and professionally cleaned and is outside with a coat of bitumen / bitumen insulation provided. Light insulation damage caused by construction and transport may be available at the reservoir. Price from Söhrewald - free of charge-

Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.

Cat.-Nr. 11-370-2 new double jacket and insulated Volume: 2400 Litres - Parts in touch with product in AISI 316 – other parts in AISI 304 without Heating Jacket Material: Parts that come in touch with the product in V4A (AISI 316) – other parts in V2A (AISI 304) Max.Working Pressure. 0,49 bar Surface fully pickled, passivated and neutralised Insulation with Mineral Wool for Hot Water Tanks Thickness = 80 mm Standard Equipment: Manhole on the top Air Release and Pressure Valve in PVC Manhole inside oval 400 x 350 and Manhole outside rectangular for insulation jacket Sample Valve Level Indicator 24 mm Ladder Support Outlet Discharge with Outlet Pipe DN 50 Digital Thermometer Clear Outlet DN 50 Transport Hooks with Insert Heating Element 230/400V, 7,5 kW Diameter: 1350 mm Height: 3130 mm Cyl. Height: 2160 mm F ...

Cat. No. 11-3170 New without heating jacket - round standing on feet Medium-contact parts V4A (AISI 316) with electric screw-in heating 230/400 V, 7.5 kW Standard: Material: medium-contact parts V4A (AISI 316) - otherwise V2A (AISI 304) Operating pressure max 0.49 bar Container completely stained, passivated and neutralized Insulation made of mineral wool for hot water tanks thickness = 80 mm Standard: Manhole top DN 400 Ventilation and vent valve made of PVC Manhole inside oval 440 x 350 and manhole 500 x 430 outside rectangular for insulated container Test tap Stand display 24 mm Ladder bracket Residual drain with forward-drawn outlet pipe DN 50 with disc valve DN 50 with lid Digital thermometers Clear drain DN 50 with disc valve with lid Transport eyelets with electric screw-in heating, 230/400V, 7.5 kW Cat. No. Contents  ...

Hot water high pressure device, 210 bar, 960 L / h, detergent tank, high pressure hose 10 m, gun, double spray Lance.

Hot water pump, centrifugal pump, chemical pump SVANEHOJ IFV 100 B - TL Q: 77.4 m3/ h engine: 3 kW 380 / 660 V IP55

Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.

Hot runner control unit - Feller Engineering MCS (2 pcs.) Year of construction: Description: 24 hot zones with cabling Price: On request

Cooling output: 420kW, connected load: 7.1kVA, weight: 4.9t, with Cooling Tower Baltimore Aircoil International TXV 237R and Desalination Control System Chemie + Wasser Lohbeck DS6, with documentation, an inspection is possible.

Heat-Recovery system (storage tank 1000ltr with internal heat exchanger) -for drinking water -function Qü = ca. 7 kW (inox-screw-heat exchanger-activity 7 kW) - refrigerant- access/discharge 77°C / 50°C - drinking water- access/discharge 40°C / 50°C (complete from 10°C to 50°C- at small drinking water-need is the gotten energy automatic for heating transfer) -for heating-function Qc = 31 kW + 9 kW =40kW Energy buffer storage 1000/800 volume: 1.000 ltr diameter: 800 mm diameter with insulation: 960 mm storage height: 2.290 mm total height: 2.590 mm

Metalref boiler Model BRIK FIRE at wooden wastes Max operating temperature 90° Potential yield 78,000 Kcal/h Outbreak potential 95,000 Kcal/h Main fuel Chips/Sawdust Complete with automatic hydraulic feeder

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...