hot foil used for sale

Heißfolienprägetiegel / Hot Foil Stamping Tiegel Heidelberg GTP Baujahr / Year 1966 - Serial-No. 63 613 Format / Size min. 85 x 102mm Format / Size max. 340 x 460mm Geschwindigkeit / Speed min. min. 1.500sph - max. 4.000sph Stanzkraft / Punching pressure 60T Gewicht / Weight approx. 2250kg Abmessungen / Dimensions 2,08 x 1,48 x 2,10m Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame

Heißfolienprägemaschine / Hot Foil Stamping GEBA 1/F-2

Dreimesserautomat / Three Knife Trimmer Wohlenberg FA 38 Baujahr / Year 1989 Format / Size max. 315 x 410mm Thicknes max. 100 mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery

Prägepresse / Hot Foil Stamping Press

Converting Line GM 330 FB-D (Hot stamp + Screen print) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Max. web width: 350 mm Min. web width: 50 mm Unwind diameter: max. 700 mm Rewind diameter: max. 600 mm - Vetaphone Corona - BST web edge control Hot foil stamping unit (flatbed) Speed: 6,000 stamps/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with a diameter of 250 mm Substrates: 50-500 μm Board thickness: 5-10 mm; 7 mm is standard Plate pressure: 30 tons Foil feed in transverse and longitudinal directions (rotating tower) Temperature range 80°-130° C Heat-up time approx. 20 min. Screen printing unit Speed 4000 print runs/h or 5-15 m/min. Web width 110 mm - 330 mm Frame size 660 mm x 500 mm Frame type 30 mm x 30 mm aluminum frame Printing area 330 mm (length) x 330 mm (width), Manufacturer: Grafisk Maskinfabrik, Substrates: 50-500 um

M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

with original HDM hot foil stamping device

with original HDM hot foil stamping device

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

R22352/11 SCHWALBACH Cross cutter Model: BS 650 Built: approx. 1995 Working width: 650 mm Fully automatic Cutting length: 4 - 1000 mm Roll diameter: 300 mm max. Material: Soft and hard foils PVC laminated fabric 0.1 - 1mm Dimensions: 1000 x 600 x 1000mm (W x D x H) Available: by arrangement

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

1. STRIP WIDTH: 700-1550 MM, THICKNESS: 0.3-3.0 MM 2. STRIP WIDTH: 650 MM, THICKNESS: 0.1 MM 3. FOIL WIDTH: 650 MM, THICKNESS: 0.1 MM 4. FOIL WIDTH: 680 MM, THICKNESS: 0.06 - 0.200 MM 5. FOIL WIDTH: 650-800 MM, THICKNESS: 0.007 - 0.065 MM

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD

AGFA Soeicherfoliensystem (CR System) ADC Solo MUSICA Computer TFT LCD Monitor Model No. B18XA_Bj. 2001 • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm

Carestream (Kodak) Storage Film System Elite as Spare Parts Dispenser First processing station consisting of computer/monitor/keyboard/mouse and software 2. Workstation 5 Kodak CR cassettes PQ: 35x43 - 2 pcs./ 35x35 - 1 pcs./ 24x30 - 1 pcs./ 18x24 - 1 pcs. Barcode scanner UPS Emergency Power • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technici ...

AGFA Storage Film System (CR) CR 85-X (mammogenic) with: First Processing Station 6 AGFA CR MM 3.0 Mammo cassettes: 18x24 - 2 pcs./ 24x30 - 4 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Konica Minolta Storage Film System (CR) Regius 190 (mammogenic) with: First Processing Station • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

RUIAN KODA MACHINERY ENG-500 foil gloves making machine, manufactured in China in 2020 is dedicated to the production of foil products i.e. breakfast bags or disposable gloves, using interchangeable sealing moulds. The robust steel body of the film glove production line ensures high operating stability, even at maximum production speed. The copper dies included with the machine allow for the production of high-quality disposable gloves with a maximum length of 400 mm and a width of 300 mm. The ENG-500 automatic film glove production line produces up to 500 pieces of this type of item in one minute. The produced gloves are characterised by two thick layers, effectively protecting the hands from viruses and bacteria. The automatic film glove production line is equipped with, among others, an AISET temperature controller, a PLC controller and a 2.2 kW YASKAWA servo drive, which ensure ...

Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rasch Type: RR foiling machines for chocolate eggs with infeed System Year of manufacturing: 1987 pieces: 2 pieces output capacity: up to 150 pieces/min. Format on machine: Double twist Ei/Egg 43x27mm / Kugel/Bowl 30 mm. We offer this machine in 'as is' condition, without warranty excluded Vat, ex Work Germany, unpacked

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.

Used packaging machine by Multivac model R 530. New 2007. Throughput up to 10 bars/min (8 pcs/min). Format Wedges Film machine : - bottom hard width 450 mm, thickness 400 µm - upper soft width 450 mm, thickness 88 µm Included: - templates for product insertion - traverse for printing on packaging with Hitachi printers - spare cutting bar sharpened by Multivac packed in a box - spare sealing plate - spare seal for sealing mould - inserts for changing the depth of the extruded film - basic set of spare parts - documentation and instruction manual Media connection : - current : 400v Rated power 20.5kW Rated current 47A - Air: Pressure min. 6-7 Bar - water: pressure approx. 3 Bar flow rate 2l/min Dimensions: L 9600mm W 1100mm H 2070mm

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

The BTS-MF40 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 40 kg. The baling press impresses with its ease of use, safe operation, it is ideal for small material volume and producing compact and easy-to-handle bales. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 2 Ton Bale weight: up to 40 kg (material depending) Bale size: 600 H (var.) x 535 W x 460 D mm Machine size: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Loading aperture: 522 W x 490 H mm Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for easy  ...

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

M. No.: 0392 Equipment / Additional information: Feeding width (mm): 500 Kw: 7.5 A: 380

AGFA CR System CR 85-X: First Processing Station (Workstation) AGFA CR MD4.0 General cassettes and ADCC HR Kassetten_ different sizes 18x24, 24x30, 35x43 (11 pieces)

Butter Forming & Wrapping Machine Manufacturer: BENHIL Type: 8380 Working hours: 0 since reconditioned Capacity: 40... 90 Pa./min, infinitely adjustable Products: Butter, Margarine etc Choose Format: 250 gr. (100x70x35 mm) Folding: bottom folding Packing material: aluminium foil, parchment paper Dosing: volume doser from 100 .. 300 gr. Dosing precision: +/- 1 % Energy: 380 V/50 Hz; 2,2 KW Weight: 1.600 k

Carestream (Kodak) Storage Tray System (CR System) DirectView CR 500 (untested) First processing station consisting of computer/monitor/keyboard/mouse Diagnostic workstation 4 Kodak CR cassettes • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Delivery, samples and training - included in the price. Category: Meat processing Tag: packaging 1500 euros without VAT

Price in euros without VAT: 5500

A fully equipped line for the production of polypropylene yarn type Technorope 1000/100/PP-300: Manufacturer: Sima Srl Useful width of the cutting head: 1000 mm Capacity: up to 300 kg/h, depending on the type of yarn Twister: 16 (with 16 batteries) Yarn types: from 5000 to 120 000 denies

Manual machine for foiling products in trays For the packaging of food products with CSF placed in plates or on a cardboard or other material, the packaging cuts and sticks when the substrate is lightly pressed on the heating plate! The machine is designed so that there is no need to adjust the temperature of the bonding heater and linear knife. Foil width from 250 – 500 mm. Technical data: Power: 100 watts, heated plate 150 watts Operating temperature: thermo knife 100°С -140 °С, heated plate 90°С -140 °С Productivity: 6 opac. / min. Dimensions: 590 x 700 x 250 mm Weight: 8.5 kg.