126,702 used machines on RESALE, but how to find them? Machine Search
Cologne S Smoking Shelter 2165 x 2500 x 2165 mm Whether on company premises, in public places or in private areas - the Cologne S smoking shelter with access on the right is a reliable choice for a practical and versatile shelter with timeless elegance in the outdoor area. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The stable frame construction made of hot-dip galvanized and powder-coated square steel tube guarantees durability and durability. The steel parts are primed and paint-coated (protection class: C4 medium). High-quality wall elements made of toughened safety glass shield against wind and rain. The canopy is designed in such a way that it can easily withstand even very high wind loads and snow loads (wind load zone I-III/snow load 1.9 kN/m²). Whether as a smoking shelter or as a bus shelter - this canop ...
Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!
- 62cm bandwidth - with digital control - Stainless steel scaffolding - can be driven on castors with locking plate
Control unit for W&P Rototherm Sty furnaces -manual control for WP Rototherm rack ovens
Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system
Year: 2021 (brand new machine, immediately available) - stable cast iron construction - hydro-pneumatic controls - adjustable position of the heads - lowered thrust unit (30 mm hoof) - profile supports - scissors stroke: 10.5 mm - working stroke of the clamp: 80 mm - crimping height: 120 mm - crimping point: 30-60 mm
From stock of Marine Consilium Selesmar MM950/A Marine Radar Monitor for sale ! MM950/A 20C ARPA DISPLAY UNIT TYPE 10MC-003 MM950 KEYBOARD UNIT TYPE 10KB-001
Roller conveyor / pulley conveyor curve 90 degrees Manufacturer: Costo Year of Make: 2009 Condition: Used Model: 90 Degree Curve Total width outside: approx. 2250 mm Total width inside: approx. 1140 mm Total width: approx. 800 mm Conveyor width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Stock: 2 pieces Price per piece Condition: fully functional, with signs of wear Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026031202 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, ...
; Gross weight [kg]: 2630; Inspection Date: 2025-12-12; Amount of previous owners: 1; Lift height[mm]: 1000; Maximum lift capacity [kg]: 300
NNP Vibratory conveyor Stainless frame and conveyor, conveyor dimensions 2500mm x 1150mm, height adjustable frame, 3Ph
1 of used motion controller, make Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM-tested OK. PS: we can potentially upload your machine program onto this controller, as well as provide further related troubleshooting and issue-resolving service.
Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...
1 used motion controller, manufacturer Mayr / Pilz / Bielomatik, type Primo Compact P21.104.0, part number 0802645, version: 2.1.2.1 (859). Came from a Bielomatik BW Papersystems machine. OEM tested OK. PS: We may be able to upload your machine program to this controller and provide other related troubleshooting and resolving services.
Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.
CORMAK CK7150LT12x1000 CNC lathe was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. CORMAK CK7 is an extremely versatile machine designed for precision machining of parts made of non-ferrous metals, ferrous metals and non-metals. It is capable of performing operations such as turning of cylindrical, conical and end faces, as well as boring, grooving and threading. Workpieces with a maximum diameter of 500 mm are machined by means of driven tools and a spindle rotating at a maximum speed of 3000 rpm. The machine’s compact design ensures a high degree of stability during even the most intensive challenges, as well as facilitating daily operation and maintenance. All this makes the offered CORMAK CK7150 LT12 CNC lathe the best choice for companies specialising in the machine tool or automotive industry. The total weight o ...
Incubator New Manufacturer: Binder Type CB 160 – CO2 Incubator • Incubator Type: CO2 Incubator • Cabinet Type: Incubator • Maximum load: 11 - 50 kg • Internal volume: 150 litres • Maximum temperature: +60 °C • External dimensions: 680 mm (width) x 920 mm (height) x 715 mm (depth) • Internal dimensions: 500 mm (width) x 600 mm (height) x 500 mm (depth) • Temperature range: 7 °C above room temperature to 60 °C • Temperature deviation at 37 °C: ±0.3 K (spatial), ±0.1 K (temporal) • Recovery time after 30 seconds door opening at 37 °C: 4 minutes • Humidity range: 90-95% relative humidity • CO2 range: 0-20 vol.-% • Setting accuracy CO2: 0.1 vol.-% • Recovery time after 30 seconds of door opening at 5% CO2 by volume: 7 minutes • CO2 measurement: infrared (IR) • Nominal voltage: 230 V (50/60 Hz) or 115 V (60 Hz) • Nominal power: 1. ...
; Gross weight [kg]: 1730; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 620; Maximum lift capacity [kg]: 350
; Gross weight [kg]: 2330; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 815; Maximum lift capacity [kg]: 450
Shared oven Miwe Condo CO 4.0608 2D used shared oven Miwe Condo CO 4.0608 2D shared oven from 2004 is currently for sale and immediately Available in our warehouse in Bielefeld.Shared oven Miwe Condo CO 4.0608 2D Miwe Condo shared oven with 2 double chambers so 4 floors plus proofing cabinet plus steamer. The stove is with Miwe FP 12 control, each floor 60x80cm long. Immediately available 40 pieces of Miwe Condo in stock. 4 floors for each 60x80 cm sheets 2 double-chamber floors, each with one controller each floor with stone baking slabs Entrance floor height 13 cm digital control Miwe FP control can be driven on swivel castors Proofing cabinet: digital control 16 editions or 8 editions for 60x40 cm sheets or for 60x80 cm sheets Dimensions: Height: 210 cm Width: 90 cm Depth: 120 cm Specifications: YEAR: 2004 400/230 V / 50Hz / 20.9 kW Electric
Envelope feeder suitable for C4 and B4 envelopes
Top and bottom case sealing / taping machine with average production output up to 1000 boxes per hour / 16 boxes per minute and box transfer speed: ·~22 mt/min ~22 mt/min; side mounted drive arms; handwheel for adjusting height. Comes with outfeed roller conveyor. Suitable for cardboard boxes and cases of following sizes: L: 150mm (min) - max (not set) W: 100mm (min) – 500mm (max) H: 100mm (min) – 500mm (max) Tape width: 25mm to 50mm (max), max foil roll DIA: 360mm, reel DIA: 76mm, fitted with Emergency Stop button. Year: 2011 Machine is in excellent overall condition with little use – originates from and established Pharma production site in Europe. Size: L: 1.800mm x W: 1.200mm x H: 1.600mm; W/T: 300kg; comes with stainless steel roller conveyor (machine size: euro-pallet x H: 1.500mm, W/T: 40kg);
diameter range 3-10 mm cutting length 10-200 mm
Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS/1AC/12DC/5 Ord.No.: 2866475 -Input: 100-240 V -Output: 12 V -Cardboard dimensions: 185/175/H50 mm -Weight: 0.6 kg
This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB
Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.
Bottle filler, Fabr. SEN, type Combi-RE H2, with 30 filling organs and 6-digit KK, set up on 0.5 lt + 0.33 lt NRW Longneck + 0.5 lt EURO-Fl, running direction: left --> right, with vacuum pump (slightly leaking), discharge table, various spare parts, S5 control, incl. operating instructions, built in 1991, already removed
Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece
Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures
COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg
We can offer you a complete line of Breathable menbrance extrusion line,manufactured by Colines,Italy in 2009,the line has just installed and adjusted,never used for production,like new line.the products-- breathable menbrance is for making diaper and hygienic materials.the net web width is 2850 mm,2 extruders,a 90 mm and a 150 mm,,serious buyer contact us,please Please visit manufacturer's website: .colines.it to learn more about this line.
Electronic cables, extension cables, electronic wires -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC -Length: 130 m -Price/Sale: complete -Roll dimensions: Ø 500/330 mm -Weight: 20 kg
Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg
Miwe Condo CO 4.0806 2D Stone Slabs Oven Electric -Shared oven with 4 floors and proofing cabinet -Manufacturer : Miwe -Model: Condo CO 4.0806 2D -with 4 floors each 80x60cm -with Miwe FP8 control -Floor entrance height 13cm -with proofing cabinet -with exhaust air hood and vapour condenser -Year of construction 2012 -18.9 kW -400 Volt 50Hz Outer dimensions approx.: 110x 115cm and 210cm high
COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.
used
Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm -Dimensions: 330/280/H510 mm Total weight: 33 kg
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg
Stock number: U2386-1 Used rotary film evaporator by Corning (UK). Evaporator has 50 l rotating evaporating flask, driven via gearbox with adjustable rotation and el motor 0.37 kW, 1425 rpm, 380 V, 50 hz. Ex design (EExdIIBT4). Heating of flask by coil inside the bath tank - can be used on steam, oil or water. Height of bath adjustable hydraulicaly by manually operated pump. Machine is equipped with two receiving tanks, condensator and all connections. All glass is made by QVF.
used
maximum number of results exceeded
please refine your search
